Macintosh-Tools
/
dingusppc
mirror of https://github.com/dingusdev/dingusppc.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
dingusppc/devices/common/pci/bandit.cpp

314 lines
11 KiB
C++
Raw Normal View History

Initial emulation of the Bandit ARBus-to-PCI bridge.
2022-01-16 21:47:04 +00:00
/*
DingusPPC - The Experimental PowerPC Macintosh emulator
bandit: clean up PCI device connection.
2023-01-23 13:06:39 +00:00
Copyright (C) 2018-23 divingkatae and maximum
Initial emulation of the Bandit ARBus-to-PCI bridge.
2022-01-16 21:47:04 +00:00
(theweirdo) spatium
(Contact divingkatae#1017 or powermax#2286 on Discord for more info)
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <https://www.gnu.org/licenses/>.
*/
bandit: clean up PCI device connection.
2023-01-23 13:06:39 +00:00
/** Bandit/Chaos ARBus-to-PCI Bridge emulation. */
Initial emulation of the Bandit ARBus-to-PCI bridge.
2022-01-16 21:47:04 +00:00
bandit: self-registration with the device registry.
2022-07-17 03:39:39 +00:00
#include <devices/common/pci/bandit.h>
#include <devices/deviceregistry.h>
Initial emulation of the Bandit ARBus-to-PCI bridge.
2022-01-16 21:47:04 +00:00
#include <devices/memctrl/memctrlbase.h>
#include <endianswap.h>
#include <loguru.hpp>
#include <machines/machinebase.h>
#include <memaccess.h>
#include <cinttypes>
changes to pci logging For invalid or unsupported PCI accesses, do the following: - log a device's full pci address using pciutils setpci command format bb:dd.f @rr.s (bus:device:function @register+offset.size). - report as read or write access. - log value for writes. - bus, device, function, and register values cannot be determined from Invalid IDSEL values so they will output as ??. - for invalid IDSEL values, report the entire value of the config_addr. - for valid IDSEL values, the bus number cannot be determined since IDSEL only specifies device number. It's probably bus 00 but we'll show ?? to indicate an IDSEL type access. Add missing config type read access logging for chaos.
2022-08-22 09:29:09 +00:00
const int MultiplyDeBruijnBitPosition2[] =
{
0, 1, 28, 2, 29, 14, 24, 3, 30, 22, 20, 15, 25, 17, 4, 8,
31, 27, 13, 23, 21, 19, 16, 7, 26, 12, 18, 6, 11, 5, 10, 9
};
/** finds the position of the bit that is set */
#define WHAT_BIT_SET(val) (MultiplyDeBruijnBitPosition2[(uint32_t)(val * 0x077CB531U) >> 27])
Standardize PCIDevice slot_id for PCIHost. PCIHost - PCIHosts (bandit and grackle) now use device number and function number for identifying attached PCIDevices. A macro DEV_FUN is added to calculate this new slot_id. Bandit no longer uses IDSEL. Grackle no longer uses only device number. machinecatalyst, machinegossamer, machinetnt - Use DEV_FUN to attach PCI devices by device number and function number.
2023-02-05 08:37:29 +00:00
#define IDSEL_TO_DEV_FUN(idsel) DEV_FUN(WHAT_BIT_SET(idsel) + 11,0)
changes to pci logging For invalid or unsupported PCI accesses, do the following: - log a device's full pci address using pciutils setpci command format bb:dd.f @rr.s (bus:device:function @register+offset.size). - report as read or write access. - log value for writes. - bus, device, function, and register values cannot be determined from Invalid IDSEL values so they will output as ??. - for invalid IDSEL values, report the entire value of the config_addr. - for valid IDSEL values, the bus number cannot be determined since IDSEL only specifies device number. It's probably bus 00 but we'll show ?? to indicate an IDSEL type access. Add missing config type read access logging for chaos.
2022-08-22 09:29:09 +00:00
bandit: clean up PCI device connection.
2023-01-23 13:06:39 +00:00
BanditPciDevice::BanditPciDevice(int bridge_num, std::string name, int dev_id, int rev)
Fix PCI config r/w of byte and word and unaligned. dingusppc could not read bytes from offset 1,2,3 or words from offset 2. dingusppc did not read words from offset 1,3 and longs from offset 1,2,3 in the same way as a real Power Mac 8600 or B&W G3. This commit fixes those issues. - Added pci_cfg_rev_read. It takes a 32 bit value from offset 0 and returns a value of the specified size using bytes starting from the specified offset. Offsets 4,5, & 6 wrap around to 0,1, & 2 respectively. The result bytes are in flipped order as required by the read method (so a value of 0x12345678 is returned as 0x78563412) A real Power Mac 8600 might return a random byte for offset 4, 5, 6 for vci0 but usually not for pci1. A B&W G3 seems to always wrap around correctly. We won't read random bytes, and we won't read a default such as 00 or FF. We'll do the wrap around which makes the most sense because writing 0x12345678 to any offset and reading from the same offset should produce the value that was written. - Added pci_cfg_rev_write. It takes a 32 bit value from offset 0, and modifies a specified number of bytes starting at a specified offset with the offset wrapping around to 0 if it exceeds 3. The modified bytes take their new values from the flipped bytes passed to pci_cfg_write. When size is 4, the original value is not used since all bytes will be modified. Basically, those two functions handle all the sizes and all the offsets and replace calls to BYTESWAP_32, read_mem or read_mem_rev, and write_mem or write_mem_rev. read_mem_rev, as it was used by pcidevice and some other places, could read beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always read the wrong byte or word if they were not at offset 0. Same for read_mem as used by mpc106. write_mem_rev, as it was used by pcidevice and some other places, could write beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always write the wrong byte or word if they were not at offset 0. Same for write_mem as used by mpc106. pcidevice: - The logging macros should be used to handle all config register access logging. - Unaligned PCI config register accesses will be output as ERROR instead of WARNING. - The logging macros include the offset and size. They also include the value for named registers or for writes. - Added MMIODevice read and write methods so that PCIDevice is not abstract if a PCIDevice doesn't override the read and write method since some PCIDevices don't have MMIO. pcihost: - Added pci_find_device stub for handling PCI bridges in future commit. bandit and mpc106: - PCI host controllers will handle all PCI config access alignment and sizing. A PCIDevice will always access config registers as 32 bits on a 4 byte boundary. The AccessDetails passed to a PCIDevice config read or write method is there only for logging purposes. bandit: - Common MMIO code is moved to new BanditHost class so both Bandit and Chaos can use it. PCI related code is moved to new BanditPCI class. - Simplify IDSEL to/from PCI device number conversion by removing the shift or subtract. - Remove BANDIT_ID_SEL check. The IDSEL conversion to PCI device number can find the bandit PCI device. - For logging, make best guess of PCI device number from invalid IDSEL - the result is always reasonable for device 0x00 to 0x0A when accessing config register 0x00 (as one would do when scanning for PCI devices like lspci does). mpc106: - Common config space code is put in cfg_setup. It handles extracting the offset. - Added code to log access to unimplemented config registers of grackle. - Don't call setup_ram when writing to config registers that setup_ram doesn't use. - pci_cfg_read calls READ_DWORD_LE_A and pci_cfg_write calls WRITE_DWORD_LE_A. When reading or writing memory that is organized as little endian dwords, such as my_pci_cfg_hdr of mpc106, the function should explicitly state that it's little endian so that the emulator may be ported one day to a CPU architecture that is not little endian. atirage: - The changes correctly place user_cfg at byte 0x40 instead of 0x43 and writes the correct byte depending on size and offset.
2022-09-02 10:32:28 +00:00
: PCIDevice(name)
{
supports_types(HWCompType::PCI_DEV);
Initial emulation of the Bandit ARBus-to-PCI bridge.
2022-01-16 21:47:04 +00:00
// prepare the PCI config header
Bandit: use common PCI configuration code.
2022-03-13 19:55:29 +00:00
this->vendor_id = PCI_VENDOR_APPLE;
bandit: clean up PCI device connection.
2023-01-23 13:06:39 +00:00
this->device_id = dev_id;
this->class_rev = 0x06000000 | (rev & 0xFFU);
Bandit: use common PCI configuration code.
2022-03-13 19:55:29 +00:00
this->cache_ln_sz = 8;
this->command = 0x16;
// make several PCI config space registers read-only
this->pci_wr_cmd = [](uint16_t cmd) {}; // command register
this->pci_wr_cache_lnsz = [](uint8_t val) {}; // cache line size register
bandit: initialize address mask register.
2022-07-25 10:51:55 +00:00
// set the bits in the fine address space field of the address mask register
// that correspond to the 32MB assigned PCI address space of this Bandit.
// This initialization is implied by the device functionality.
this->addr_mask = 3 << ((bridge_num & 3) * 2);
bandit: more config space registers.
2022-12-19 00:28:16 +00:00
// initial PCI number + chip mode: big endian, interrupts & VGA space disabled
this->mode_ctrl = ((bridge_num & 3) << 2) | 3;
this->rd_hold_off_cnt = 8;
Initial emulation of the Bandit ARBus-to-PCI bridge.
2022-01-16 21:47:04 +00:00
}
bandit: clean up PCI device connection.
2023-01-23 13:06:39 +00:00
uint32_t BanditPciDevice::pci_cfg_read(uint32_t reg_offs, AccessDetails &details)
Bandit: implement address mask register.
2022-04-13 20:38:51 +00:00
{
if (reg_offs < 64) {
Fix PCI config r/w of byte and word and unaligned. dingusppc could not read bytes from offset 1,2,3 or words from offset 2. dingusppc did not read words from offset 1,3 and longs from offset 1,2,3 in the same way as a real Power Mac 8600 or B&W G3. This commit fixes those issues. - Added pci_cfg_rev_read. It takes a 32 bit value from offset 0 and returns a value of the specified size using bytes starting from the specified offset. Offsets 4,5, & 6 wrap around to 0,1, & 2 respectively. The result bytes are in flipped order as required by the read method (so a value of 0x12345678 is returned as 0x78563412) A real Power Mac 8600 might return a random byte for offset 4, 5, 6 for vci0 but usually not for pci1. A B&W G3 seems to always wrap around correctly. We won't read random bytes, and we won't read a default such as 00 or FF. We'll do the wrap around which makes the most sense because writing 0x12345678 to any offset and reading from the same offset should produce the value that was written. - Added pci_cfg_rev_write. It takes a 32 bit value from offset 0, and modifies a specified number of bytes starting at a specified offset with the offset wrapping around to 0 if it exceeds 3. The modified bytes take their new values from the flipped bytes passed to pci_cfg_write. When size is 4, the original value is not used since all bytes will be modified. Basically, those two functions handle all the sizes and all the offsets and replace calls to BYTESWAP_32, read_mem or read_mem_rev, and write_mem or write_mem_rev. read_mem_rev, as it was used by pcidevice and some other places, could read beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always read the wrong byte or word if they were not at offset 0. Same for read_mem as used by mpc106. write_mem_rev, as it was used by pcidevice and some other places, could write beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always write the wrong byte or word if they were not at offset 0. Same for write_mem as used by mpc106. pcidevice: - The logging macros should be used to handle all config register access logging. - Unaligned PCI config register accesses will be output as ERROR instead of WARNING. - The logging macros include the offset and size. They also include the value for named registers or for writes. - Added MMIODevice read and write methods so that PCIDevice is not abstract if a PCIDevice doesn't override the read and write method since some PCIDevices don't have MMIO. pcihost: - Added pci_find_device stub for handling PCI bridges in future commit. bandit and mpc106: - PCI host controllers will handle all PCI config access alignment and sizing. A PCIDevice will always access config registers as 32 bits on a 4 byte boundary. The AccessDetails passed to a PCIDevice config read or write method is there only for logging purposes. bandit: - Common MMIO code is moved to new BanditHost class so both Bandit and Chaos can use it. PCI related code is moved to new BanditPCI class. - Simplify IDSEL to/from PCI device number conversion by removing the shift or subtract. - Remove BANDIT_ID_SEL check. The IDSEL conversion to PCI device number can find the bandit PCI device. - For logging, make best guess of PCI device number from invalid IDSEL - the result is always reasonable for device 0x00 to 0x0A when accessing config register 0x00 (as one would do when scanning for PCI devices like lspci does). mpc106: - Common config space code is put in cfg_setup. It handles extracting the offset. - Added code to log access to unimplemented config registers of grackle. - Don't call setup_ram when writing to config registers that setup_ram doesn't use. - pci_cfg_read calls READ_DWORD_LE_A and pci_cfg_write calls WRITE_DWORD_LE_A. When reading or writing memory that is organized as little endian dwords, such as my_pci_cfg_hdr of mpc106, the function should explicitly state that it's little endian so that the emulator may be ported one day to a CPU architecture that is not little endian. atirage: - The changes correctly place user_cfg at byte 0x40 instead of 0x43 and writes the correct byte depending on size and offset.
2022-09-02 10:32:28 +00:00
return PCIDevice::pci_cfg_read(reg_offs, details);
Bandit: implement address mask register.
2022-04-13 20:38:51 +00:00
}
Revert "PCI fixes"
2022-09-02 23:24:06 +00:00
switch (reg_offs) {
case BANDIT_ADDR_MASK:
Fix PCI config r/w of byte and word and unaligned. dingusppc could not read bytes from offset 1,2,3 or words from offset 2. dingusppc did not read words from offset 1,3 and longs from offset 1,2,3 in the same way as a real Power Mac 8600 or B&W G3. This commit fixes those issues. - Added pci_cfg_rev_read. It takes a 32 bit value from offset 0 and returns a value of the specified size using bytes starting from the specified offset. Offsets 4,5, & 6 wrap around to 0,1, & 2 respectively. The result bytes are in flipped order as required by the read method (so a value of 0x12345678 is returned as 0x78563412) A real Power Mac 8600 might return a random byte for offset 4, 5, 6 for vci0 but usually not for pci1. A B&W G3 seems to always wrap around correctly. We won't read random bytes, and we won't read a default such as 00 or FF. We'll do the wrap around which makes the most sense because writing 0x12345678 to any offset and reading from the same offset should produce the value that was written. - Added pci_cfg_rev_write. It takes a 32 bit value from offset 0, and modifies a specified number of bytes starting at a specified offset with the offset wrapping around to 0 if it exceeds 3. The modified bytes take their new values from the flipped bytes passed to pci_cfg_write. When size is 4, the original value is not used since all bytes will be modified. Basically, those two functions handle all the sizes and all the offsets and replace calls to BYTESWAP_32, read_mem or read_mem_rev, and write_mem or write_mem_rev. read_mem_rev, as it was used by pcidevice and some other places, could read beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always read the wrong byte or word if they were not at offset 0. Same for read_mem as used by mpc106. write_mem_rev, as it was used by pcidevice and some other places, could write beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always write the wrong byte or word if they were not at offset 0. Same for write_mem as used by mpc106. pcidevice: - The logging macros should be used to handle all config register access logging. - Unaligned PCI config register accesses will be output as ERROR instead of WARNING. - The logging macros include the offset and size. They also include the value for named registers or for writes. - Added MMIODevice read and write methods so that PCIDevice is not abstract if a PCIDevice doesn't override the read and write method since some PCIDevices don't have MMIO. pcihost: - Added pci_find_device stub for handling PCI bridges in future commit. bandit and mpc106: - PCI host controllers will handle all PCI config access alignment and sizing. A PCIDevice will always access config registers as 32 bits on a 4 byte boundary. The AccessDetails passed to a PCIDevice config read or write method is there only for logging purposes. bandit: - Common MMIO code is moved to new BanditHost class so both Bandit and Chaos can use it. PCI related code is moved to new BanditPCI class. - Simplify IDSEL to/from PCI device number conversion by removing the shift or subtract. - Remove BANDIT_ID_SEL check. The IDSEL conversion to PCI device number can find the bandit PCI device. - For logging, make best guess of PCI device number from invalid IDSEL - the result is always reasonable for device 0x00 to 0x0A when accessing config register 0x00 (as one would do when scanning for PCI devices like lspci does). mpc106: - Common config space code is put in cfg_setup. It handles extracting the offset. - Added code to log access to unimplemented config registers of grackle. - Don't call setup_ram when writing to config registers that setup_ram doesn't use. - pci_cfg_read calls READ_DWORD_LE_A and pci_cfg_write calls WRITE_DWORD_LE_A. When reading or writing memory that is organized as little endian dwords, such as my_pci_cfg_hdr of mpc106, the function should explicitly state that it's little endian so that the emulator may be ported one day to a CPU architecture that is not little endian. atirage: - The changes correctly place user_cfg at byte 0x40 instead of 0x43 and writes the correct byte depending on size and offset.
2022-09-02 10:32:28 +00:00
return this->addr_mask;
bandit: more config space registers.
2022-12-19 00:28:16 +00:00
case BANDIT_MODE_SELECT:
Fix PCI config r/w of byte and word and unaligned. dingusppc could not read bytes from offset 1,2,3 or words from offset 2. dingusppc did not read words from offset 1,3 and longs from offset 1,2,3 in the same way as a real Power Mac 8600 or B&W G3. This commit fixes those issues. - Added pci_cfg_rev_read. It takes a 32 bit value from offset 0 and returns a value of the specified size using bytes starting from the specified offset. Offsets 4,5, & 6 wrap around to 0,1, & 2 respectively. The result bytes are in flipped order as required by the read method (so a value of 0x12345678 is returned as 0x78563412) A real Power Mac 8600 might return a random byte for offset 4, 5, 6 for vci0 but usually not for pci1. A B&W G3 seems to always wrap around correctly. We won't read random bytes, and we won't read a default such as 00 or FF. We'll do the wrap around which makes the most sense because writing 0x12345678 to any offset and reading from the same offset should produce the value that was written. - Added pci_cfg_rev_write. It takes a 32 bit value from offset 0, and modifies a specified number of bytes starting at a specified offset with the offset wrapping around to 0 if it exceeds 3. The modified bytes take their new values from the flipped bytes passed to pci_cfg_write. When size is 4, the original value is not used since all bytes will be modified. Basically, those two functions handle all the sizes and all the offsets and replace calls to BYTESWAP_32, read_mem or read_mem_rev, and write_mem or write_mem_rev. read_mem_rev, as it was used by pcidevice and some other places, could read beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always read the wrong byte or word if they were not at offset 0. Same for read_mem as used by mpc106. write_mem_rev, as it was used by pcidevice and some other places, could write beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always write the wrong byte or word if they were not at offset 0. Same for write_mem as used by mpc106. pcidevice: - The logging macros should be used to handle all config register access logging. - Unaligned PCI config register accesses will be output as ERROR instead of WARNING. - The logging macros include the offset and size. They also include the value for named registers or for writes. - Added MMIODevice read and write methods so that PCIDevice is not abstract if a PCIDevice doesn't override the read and write method since some PCIDevices don't have MMIO. pcihost: - Added pci_find_device stub for handling PCI bridges in future commit. bandit and mpc106: - PCI host controllers will handle all PCI config access alignment and sizing. A PCIDevice will always access config registers as 32 bits on a 4 byte boundary. The AccessDetails passed to a PCIDevice config read or write method is there only for logging purposes. bandit: - Common MMIO code is moved to new BanditHost class so both Bandit and Chaos can use it. PCI related code is moved to new BanditPCI class. - Simplify IDSEL to/from PCI device number conversion by removing the shift or subtract. - Remove BANDIT_ID_SEL check. The IDSEL conversion to PCI device number can find the bandit PCI device. - For logging, make best guess of PCI device number from invalid IDSEL - the result is always reasonable for device 0x00 to 0x0A when accessing config register 0x00 (as one would do when scanning for PCI devices like lspci does). mpc106: - Common config space code is put in cfg_setup. It handles extracting the offset. - Added code to log access to unimplemented config registers of grackle. - Don't call setup_ram when writing to config registers that setup_ram doesn't use. - pci_cfg_read calls READ_DWORD_LE_A and pci_cfg_write calls WRITE_DWORD_LE_A. When reading or writing memory that is organized as little endian dwords, such as my_pci_cfg_hdr of mpc106, the function should explicitly state that it's little endian so that the emulator may be ported one day to a CPU architecture that is not little endian. atirage: - The changes correctly place user_cfg at byte 0x40 instead of 0x43 and writes the correct byte depending on size and offset.
2022-09-02 10:32:28 +00:00
return this->mode_ctrl;
bandit: more config space registers.
2022-12-19 00:28:16 +00:00
case BANDIT_ARBUS_RD_HOLD_OFF:
Fix PCI config r/w of byte and word and unaligned. dingusppc could not read bytes from offset 1,2,3 or words from offset 2. dingusppc did not read words from offset 1,3 and longs from offset 1,2,3 in the same way as a real Power Mac 8600 or B&W G3. This commit fixes those issues. - Added pci_cfg_rev_read. It takes a 32 bit value from offset 0 and returns a value of the specified size using bytes starting from the specified offset. Offsets 4,5, & 6 wrap around to 0,1, & 2 respectively. The result bytes are in flipped order as required by the read method (so a value of 0x12345678 is returned as 0x78563412) A real Power Mac 8600 might return a random byte for offset 4, 5, 6 for vci0 but usually not for pci1. A B&W G3 seems to always wrap around correctly. We won't read random bytes, and we won't read a default such as 00 or FF. We'll do the wrap around which makes the most sense because writing 0x12345678 to any offset and reading from the same offset should produce the value that was written. - Added pci_cfg_rev_write. It takes a 32 bit value from offset 0, and modifies a specified number of bytes starting at a specified offset with the offset wrapping around to 0 if it exceeds 3. The modified bytes take their new values from the flipped bytes passed to pci_cfg_write. When size is 4, the original value is not used since all bytes will be modified. Basically, those two functions handle all the sizes and all the offsets and replace calls to BYTESWAP_32, read_mem or read_mem_rev, and write_mem or write_mem_rev. read_mem_rev, as it was used by pcidevice and some other places, could read beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always read the wrong byte or word if they were not at offset 0. Same for read_mem as used by mpc106. write_mem_rev, as it was used by pcidevice and some other places, could write beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always write the wrong byte or word if they were not at offset 0. Same for write_mem as used by mpc106. pcidevice: - The logging macros should be used to handle all config register access logging. - Unaligned PCI config register accesses will be output as ERROR instead of WARNING. - The logging macros include the offset and size. They also include the value for named registers or for writes. - Added MMIODevice read and write methods so that PCIDevice is not abstract if a PCIDevice doesn't override the read and write method since some PCIDevices don't have MMIO. pcihost: - Added pci_find_device stub for handling PCI bridges in future commit. bandit and mpc106: - PCI host controllers will handle all PCI config access alignment and sizing. A PCIDevice will always access config registers as 32 bits on a 4 byte boundary. The AccessDetails passed to a PCIDevice config read or write method is there only for logging purposes. bandit: - Common MMIO code is moved to new BanditHost class so both Bandit and Chaos can use it. PCI related code is moved to new BanditPCI class. - Simplify IDSEL to/from PCI device number conversion by removing the shift or subtract. - Remove BANDIT_ID_SEL check. The IDSEL conversion to PCI device number can find the bandit PCI device. - For logging, make best guess of PCI device number from invalid IDSEL - the result is always reasonable for device 0x00 to 0x0A when accessing config register 0x00 (as one would do when scanning for PCI devices like lspci does). mpc106: - Common config space code is put in cfg_setup. It handles extracting the offset. - Added code to log access to unimplemented config registers of grackle. - Don't call setup_ram when writing to config registers that setup_ram doesn't use. - pci_cfg_read calls READ_DWORD_LE_A and pci_cfg_write calls WRITE_DWORD_LE_A. When reading or writing memory that is organized as little endian dwords, such as my_pci_cfg_hdr of mpc106, the function should explicitly state that it's little endian so that the emulator may be ported one day to a CPU architecture that is not little endian. atirage: - The changes correctly place user_cfg at byte 0x40 instead of 0x43 and writes the correct byte depending on size and offset.
2022-09-02 10:32:28 +00:00
return this->rd_hold_off_cnt;
bandit: refactor host read and write methods.
2023-02-01 15:21:49 +00:00
default:
LOG_READ_UNIMPLEMENTED_CONFIG_REGISTER();
Bandit: implement address mask register.
2022-04-13 20:38:51 +00:00
}
Fix return value for bad pci config address PCI config read fails should return all 1 bits. All unused registers in an existing PCI device should return 0. Because that's what my Power Mac 8600 returns when I run my Open Firmware lspci command. Any bus/device/function that doesn't exist returns FF and won't be listed by lspci. Any registers that are unused will show as 00 in the lspci output. Make grackle log bus:device.function @register.size in all cases.
2022-08-24 14:12:35 +00:00
return 0;
Bandit: implement address mask register.
2022-04-13 20:38:51 +00:00
}
bandit: clean up PCI device connection.
2023-01-23 13:06:39 +00:00
void BanditPciDevice::pci_cfg_write(uint32_t reg_offs, uint32_t value, AccessDetails &details)
Bandit: implement address mask register.
2022-04-13 20:38:51 +00:00
{
if (reg_offs < 64) {
Fix PCI config r/w of byte and word and unaligned. dingusppc could not read bytes from offset 1,2,3 or words from offset 2. dingusppc did not read words from offset 1,3 and longs from offset 1,2,3 in the same way as a real Power Mac 8600 or B&W G3. This commit fixes those issues. - Added pci_cfg_rev_read. It takes a 32 bit value from offset 0 and returns a value of the specified size using bytes starting from the specified offset. Offsets 4,5, & 6 wrap around to 0,1, & 2 respectively. The result bytes are in flipped order as required by the read method (so a value of 0x12345678 is returned as 0x78563412) A real Power Mac 8600 might return a random byte for offset 4, 5, 6 for vci0 but usually not for pci1. A B&W G3 seems to always wrap around correctly. We won't read random bytes, and we won't read a default such as 00 or FF. We'll do the wrap around which makes the most sense because writing 0x12345678 to any offset and reading from the same offset should produce the value that was written. - Added pci_cfg_rev_write. It takes a 32 bit value from offset 0, and modifies a specified number of bytes starting at a specified offset with the offset wrapping around to 0 if it exceeds 3. The modified bytes take their new values from the flipped bytes passed to pci_cfg_write. When size is 4, the original value is not used since all bytes will be modified. Basically, those two functions handle all the sizes and all the offsets and replace calls to BYTESWAP_32, read_mem or read_mem_rev, and write_mem or write_mem_rev. read_mem_rev, as it was used by pcidevice and some other places, could read beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always read the wrong byte or word if they were not at offset 0. Same for read_mem as used by mpc106. write_mem_rev, as it was used by pcidevice and some other places, could write beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always write the wrong byte or word if they were not at offset 0. Same for write_mem as used by mpc106. pcidevice: - The logging macros should be used to handle all config register access logging. - Unaligned PCI config register accesses will be output as ERROR instead of WARNING. - The logging macros include the offset and size. They also include the value for named registers or for writes. - Added MMIODevice read and write methods so that PCIDevice is not abstract if a PCIDevice doesn't override the read and write method since some PCIDevices don't have MMIO. pcihost: - Added pci_find_device stub for handling PCI bridges in future commit. bandit and mpc106: - PCI host controllers will handle all PCI config access alignment and sizing. A PCIDevice will always access config registers as 32 bits on a 4 byte boundary. The AccessDetails passed to a PCIDevice config read or write method is there only for logging purposes. bandit: - Common MMIO code is moved to new BanditHost class so both Bandit and Chaos can use it. PCI related code is moved to new BanditPCI class. - Simplify IDSEL to/from PCI device number conversion by removing the shift or subtract. - Remove BANDIT_ID_SEL check. The IDSEL conversion to PCI device number can find the bandit PCI device. - For logging, make best guess of PCI device number from invalid IDSEL - the result is always reasonable for device 0x00 to 0x0A when accessing config register 0x00 (as one would do when scanning for PCI devices like lspci does). mpc106: - Common config space code is put in cfg_setup. It handles extracting the offset. - Added code to log access to unimplemented config registers of grackle. - Don't call setup_ram when writing to config registers that setup_ram doesn't use. - pci_cfg_read calls READ_DWORD_LE_A and pci_cfg_write calls WRITE_DWORD_LE_A. When reading or writing memory that is organized as little endian dwords, such as my_pci_cfg_hdr of mpc106, the function should explicitly state that it's little endian so that the emulator may be ported one day to a CPU architecture that is not little endian. atirage: - The changes correctly place user_cfg at byte 0x40 instead of 0x43 and writes the correct byte depending on size and offset.
2022-09-02 10:32:28 +00:00
PCIDevice::pci_cfg_write(reg_offs, value, details);
Bandit: implement address mask register.
2022-04-13 20:38:51 +00:00
return;
}
Revert "PCI fixes"
2022-09-02 23:24:06 +00:00
switch (reg_offs) {
case BANDIT_ADDR_MASK:
bandit: more config space registers.
2022-12-19 00:28:16 +00:00
this->addr_mask = value;
Bandit: implement address mask register.
2022-04-13 20:38:51 +00:00
this->verbose_address_space();
Fix PCI config r/w of byte and word and unaligned. dingusppc could not read bytes from offset 1,2,3 or words from offset 2. dingusppc did not read words from offset 1,3 and longs from offset 1,2,3 in the same way as a real Power Mac 8600 or B&W G3. This commit fixes those issues. - Added pci_cfg_rev_read. It takes a 32 bit value from offset 0 and returns a value of the specified size using bytes starting from the specified offset. Offsets 4,5, & 6 wrap around to 0,1, & 2 respectively. The result bytes are in flipped order as required by the read method (so a value of 0x12345678 is returned as 0x78563412) A real Power Mac 8600 might return a random byte for offset 4, 5, 6 for vci0 but usually not for pci1. A B&W G3 seems to always wrap around correctly. We won't read random bytes, and we won't read a default such as 00 or FF. We'll do the wrap around which makes the most sense because writing 0x12345678 to any offset and reading from the same offset should produce the value that was written. - Added pci_cfg_rev_write. It takes a 32 bit value from offset 0, and modifies a specified number of bytes starting at a specified offset with the offset wrapping around to 0 if it exceeds 3. The modified bytes take their new values from the flipped bytes passed to pci_cfg_write. When size is 4, the original value is not used since all bytes will be modified. Basically, those two functions handle all the sizes and all the offsets and replace calls to BYTESWAP_32, read_mem or read_mem_rev, and write_mem or write_mem_rev. read_mem_rev, as it was used by pcidevice and some other places, could read beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always read the wrong byte or word if they were not at offset 0. Same for read_mem as used by mpc106. write_mem_rev, as it was used by pcidevice and some other places, could write beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always write the wrong byte or word if they were not at offset 0. Same for write_mem as used by mpc106. pcidevice: - The logging macros should be used to handle all config register access logging. - Unaligned PCI config register accesses will be output as ERROR instead of WARNING. - The logging macros include the offset and size. They also include the value for named registers or for writes. - Added MMIODevice read and write methods so that PCIDevice is not abstract if a PCIDevice doesn't override the read and write method since some PCIDevices don't have MMIO. pcihost: - Added pci_find_device stub for handling PCI bridges in future commit. bandit and mpc106: - PCI host controllers will handle all PCI config access alignment and sizing. A PCIDevice will always access config registers as 32 bits on a 4 byte boundary. The AccessDetails passed to a PCIDevice config read or write method is there only for logging purposes. bandit: - Common MMIO code is moved to new BanditHost class so both Bandit and Chaos can use it. PCI related code is moved to new BanditPCI class. - Simplify IDSEL to/from PCI device number conversion by removing the shift or subtract. - Remove BANDIT_ID_SEL check. The IDSEL conversion to PCI device number can find the bandit PCI device. - For logging, make best guess of PCI device number from invalid IDSEL - the result is always reasonable for device 0x00 to 0x0A when accessing config register 0x00 (as one would do when scanning for PCI devices like lspci does). mpc106: - Common config space code is put in cfg_setup. It handles extracting the offset. - Added code to log access to unimplemented config registers of grackle. - Don't call setup_ram when writing to config registers that setup_ram doesn't use. - pci_cfg_read calls READ_DWORD_LE_A and pci_cfg_write calls WRITE_DWORD_LE_A. When reading or writing memory that is organized as little endian dwords, such as my_pci_cfg_hdr of mpc106, the function should explicitly state that it's little endian so that the emulator may be ported one day to a CPU architecture that is not little endian. atirage: - The changes correctly place user_cfg at byte 0x40 instead of 0x43 and writes the correct byte depending on size and offset.
2022-09-02 10:32:28 +00:00
return;
bandit: more config space registers.
2022-12-19 00:28:16 +00:00
case BANDIT_MODE_SELECT:
this->mode_ctrl = value;
Fix PCI config r/w of byte and word and unaligned. dingusppc could not read bytes from offset 1,2,3 or words from offset 2. dingusppc did not read words from offset 1,3 and longs from offset 1,2,3 in the same way as a real Power Mac 8600 or B&W G3. This commit fixes those issues. - Added pci_cfg_rev_read. It takes a 32 bit value from offset 0 and returns a value of the specified size using bytes starting from the specified offset. Offsets 4,5, & 6 wrap around to 0,1, & 2 respectively. The result bytes are in flipped order as required by the read method (so a value of 0x12345678 is returned as 0x78563412) A real Power Mac 8600 might return a random byte for offset 4, 5, 6 for vci0 but usually not for pci1. A B&W G3 seems to always wrap around correctly. We won't read random bytes, and we won't read a default such as 00 or FF. We'll do the wrap around which makes the most sense because writing 0x12345678 to any offset and reading from the same offset should produce the value that was written. - Added pci_cfg_rev_write. It takes a 32 bit value from offset 0, and modifies a specified number of bytes starting at a specified offset with the offset wrapping around to 0 if it exceeds 3. The modified bytes take their new values from the flipped bytes passed to pci_cfg_write. When size is 4, the original value is not used since all bytes will be modified. Basically, those two functions handle all the sizes and all the offsets and replace calls to BYTESWAP_32, read_mem or read_mem_rev, and write_mem or write_mem_rev. read_mem_rev, as it was used by pcidevice and some other places, could read beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always read the wrong byte or word if they were not at offset 0. Same for read_mem as used by mpc106. write_mem_rev, as it was used by pcidevice and some other places, could write beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always write the wrong byte or word if they were not at offset 0. Same for write_mem as used by mpc106. pcidevice: - The logging macros should be used to handle all config register access logging. - Unaligned PCI config register accesses will be output as ERROR instead of WARNING. - The logging macros include the offset and size. They also include the value for named registers or for writes. - Added MMIODevice read and write methods so that PCIDevice is not abstract if a PCIDevice doesn't override the read and write method since some PCIDevices don't have MMIO. pcihost: - Added pci_find_device stub for handling PCI bridges in future commit. bandit and mpc106: - PCI host controllers will handle all PCI config access alignment and sizing. A PCIDevice will always access config registers as 32 bits on a 4 byte boundary. The AccessDetails passed to a PCIDevice config read or write method is there only for logging purposes. bandit: - Common MMIO code is moved to new BanditHost class so both Bandit and Chaos can use it. PCI related code is moved to new BanditPCI class. - Simplify IDSEL to/from PCI device number conversion by removing the shift or subtract. - Remove BANDIT_ID_SEL check. The IDSEL conversion to PCI device number can find the bandit PCI device. - For logging, make best guess of PCI device number from invalid IDSEL - the result is always reasonable for device 0x00 to 0x0A when accessing config register 0x00 (as one would do when scanning for PCI devices like lspci does). mpc106: - Common config space code is put in cfg_setup. It handles extracting the offset. - Added code to log access to unimplemented config registers of grackle. - Don't call setup_ram when writing to config registers that setup_ram doesn't use. - pci_cfg_read calls READ_DWORD_LE_A and pci_cfg_write calls WRITE_DWORD_LE_A. When reading or writing memory that is organized as little endian dwords, such as my_pci_cfg_hdr of mpc106, the function should explicitly state that it's little endian so that the emulator may be ported one day to a CPU architecture that is not little endian. atirage: - The changes correctly place user_cfg at byte 0x40 instead of 0x43 and writes the correct byte depending on size and offset.
2022-09-02 10:32:28 +00:00
return;
bandit: more config space registers.
2022-12-19 00:28:16 +00:00
case BANDIT_ARBUS_RD_HOLD_OFF:
Fix PCI config r/w of byte and word and unaligned. dingusppc could not read bytes from offset 1,2,3 or words from offset 2. dingusppc did not read words from offset 1,3 and longs from offset 1,2,3 in the same way as a real Power Mac 8600 or B&W G3. This commit fixes those issues. - Added pci_cfg_rev_read. It takes a 32 bit value from offset 0 and returns a value of the specified size using bytes starting from the specified offset. Offsets 4,5, & 6 wrap around to 0,1, & 2 respectively. The result bytes are in flipped order as required by the read method (so a value of 0x12345678 is returned as 0x78563412) A real Power Mac 8600 might return a random byte for offset 4, 5, 6 for vci0 but usually not for pci1. A B&W G3 seems to always wrap around correctly. We won't read random bytes, and we won't read a default such as 00 or FF. We'll do the wrap around which makes the most sense because writing 0x12345678 to any offset and reading from the same offset should produce the value that was written. - Added pci_cfg_rev_write. It takes a 32 bit value from offset 0, and modifies a specified number of bytes starting at a specified offset with the offset wrapping around to 0 if it exceeds 3. The modified bytes take their new values from the flipped bytes passed to pci_cfg_write. When size is 4, the original value is not used since all bytes will be modified. Basically, those two functions handle all the sizes and all the offsets and replace calls to BYTESWAP_32, read_mem or read_mem_rev, and write_mem or write_mem_rev. read_mem_rev, as it was used by pcidevice and some other places, could read beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always read the wrong byte or word if they were not at offset 0. Same for read_mem as used by mpc106. write_mem_rev, as it was used by pcidevice and some other places, could write beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always write the wrong byte or word if they were not at offset 0. Same for write_mem as used by mpc106. pcidevice: - The logging macros should be used to handle all config register access logging. - Unaligned PCI config register accesses will be output as ERROR instead of WARNING. - The logging macros include the offset and size. They also include the value for named registers or for writes. - Added MMIODevice read and write methods so that PCIDevice is not abstract if a PCIDevice doesn't override the read and write method since some PCIDevices don't have MMIO. pcihost: - Added pci_find_device stub for handling PCI bridges in future commit. bandit and mpc106: - PCI host controllers will handle all PCI config access alignment and sizing. A PCIDevice will always access config registers as 32 bits on a 4 byte boundary. The AccessDetails passed to a PCIDevice config read or write method is there only for logging purposes. bandit: - Common MMIO code is moved to new BanditHost class so both Bandit and Chaos can use it. PCI related code is moved to new BanditPCI class. - Simplify IDSEL to/from PCI device number conversion by removing the shift or subtract. - Remove BANDIT_ID_SEL check. The IDSEL conversion to PCI device number can find the bandit PCI device. - For logging, make best guess of PCI device number from invalid IDSEL - the result is always reasonable for device 0x00 to 0x0A when accessing config register 0x00 (as one would do when scanning for PCI devices like lspci does). mpc106: - Common config space code is put in cfg_setup. It handles extracting the offset. - Added code to log access to unimplemented config registers of grackle. - Don't call setup_ram when writing to config registers that setup_ram doesn't use. - pci_cfg_read calls READ_DWORD_LE_A and pci_cfg_write calls WRITE_DWORD_LE_A. When reading or writing memory that is organized as little endian dwords, such as my_pci_cfg_hdr of mpc106, the function should explicitly state that it's little endian so that the emulator may be ported one day to a CPU architecture that is not little endian. atirage: - The changes correctly place user_cfg at byte 0x40 instead of 0x43 and writes the correct byte depending on size and offset.
2022-09-02 10:32:28 +00:00
this->rd_hold_off_cnt = value & 0x1F;
return;
bandit: refactor host read and write methods.
2023-02-01 15:21:49 +00:00
default:
LOG_WRITE_UNIMPLEMENTED_CONFIG_REGISTER();
Bandit: implement address mask register.
2022-04-13 20:38:51 +00:00
}
}
bandit: refactor host read and write methods.
2023-02-01 15:21:49 +00:00
void BanditPciDevice::verbose_address_space()
Initial emulation of the Bandit ARBus-to-PCI bridge.
2022-01-16 21:47:04 +00:00
{
bandit: refactor host read and write methods.
2023-02-01 15:21:49 +00:00
uint32_t mask;
int bit_pos;
if (!this->addr_mask) {
Fix PCI config r/w of byte and word and unaligned. dingusppc could not read bytes from offset 1,2,3 or words from offset 2. dingusppc did not read words from offset 1,3 and longs from offset 1,2,3 in the same way as a real Power Mac 8600 or B&W G3. This commit fixes those issues. - Added pci_cfg_rev_read. It takes a 32 bit value from offset 0 and returns a value of the specified size using bytes starting from the specified offset. Offsets 4,5, & 6 wrap around to 0,1, & 2 respectively. The result bytes are in flipped order as required by the read method (so a value of 0x12345678 is returned as 0x78563412) A real Power Mac 8600 might return a random byte for offset 4, 5, 6 for vci0 but usually not for pci1. A B&W G3 seems to always wrap around correctly. We won't read random bytes, and we won't read a default such as 00 or FF. We'll do the wrap around which makes the most sense because writing 0x12345678 to any offset and reading from the same offset should produce the value that was written. - Added pci_cfg_rev_write. It takes a 32 bit value from offset 0, and modifies a specified number of bytes starting at a specified offset with the offset wrapping around to 0 if it exceeds 3. The modified bytes take their new values from the flipped bytes passed to pci_cfg_write. When size is 4, the original value is not used since all bytes will be modified. Basically, those two functions handle all the sizes and all the offsets and replace calls to BYTESWAP_32, read_mem or read_mem_rev, and write_mem or write_mem_rev. read_mem_rev, as it was used by pcidevice and some other places, could read beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always read the wrong byte or word if they were not at offset 0. Same for read_mem as used by mpc106. write_mem_rev, as it was used by pcidevice and some other places, could write beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always write the wrong byte or word if they were not at offset 0. Same for write_mem as used by mpc106. pcidevice: - The logging macros should be used to handle all config register access logging. - Unaligned PCI config register accesses will be output as ERROR instead of WARNING. - The logging macros include the offset and size. They also include the value for named registers or for writes. - Added MMIODevice read and write methods so that PCIDevice is not abstract if a PCIDevice doesn't override the read and write method since some PCIDevices don't have MMIO. pcihost: - Added pci_find_device stub for handling PCI bridges in future commit. bandit and mpc106: - PCI host controllers will handle all PCI config access alignment and sizing. A PCIDevice will always access config registers as 32 bits on a 4 byte boundary. The AccessDetails passed to a PCIDevice config read or write method is there only for logging purposes. bandit: - Common MMIO code is moved to new BanditHost class so both Bandit and Chaos can use it. PCI related code is moved to new BanditPCI class. - Simplify IDSEL to/from PCI device number conversion by removing the shift or subtract. - Remove BANDIT_ID_SEL check. The IDSEL conversion to PCI device number can find the bandit PCI device. - For logging, make best guess of PCI device number from invalid IDSEL - the result is always reasonable for device 0x00 to 0x0A when accessing config register 0x00 (as one would do when scanning for PCI devices like lspci does). mpc106: - Common config space code is put in cfg_setup. It handles extracting the offset. - Added code to log access to unimplemented config registers of grackle. - Don't call setup_ram when writing to config registers that setup_ram doesn't use. - pci_cfg_read calls READ_DWORD_LE_A and pci_cfg_write calls WRITE_DWORD_LE_A. When reading or writing memory that is organized as little endian dwords, such as my_pci_cfg_hdr of mpc106, the function should explicitly state that it's little endian so that the emulator may be ported one day to a CPU architecture that is not little endian. atirage: - The changes correctly place user_cfg at byte 0x40 instead of 0x43 and writes the correct byte depending on size and offset.
2022-09-02 10:32:28 +00:00
return;
}
bandit: refactor host read and write methods.
2023-02-01 15:21:49 +00:00
LOG_F(INFO, "%s address spaces:", this->pci_name.c_str());
// verbose coarse aka 256MB memory regions
for (mask = 0x10000, bit_pos = 0; mask != 0x80000000UL; mask <<= 1, bit_pos++) {
if (this->addr_mask & mask) {
uint32_t start_addr = bit_pos << 28;
LOG_F(INFO, "- 0x%X ... 0x%X", start_addr, start_addr + 0x0FFFFFFFU);
}
Fix PCI config r/w of byte and word and unaligned. dingusppc could not read bytes from offset 1,2,3 or words from offset 2. dingusppc did not read words from offset 1,3 and longs from offset 1,2,3 in the same way as a real Power Mac 8600 or B&W G3. This commit fixes those issues. - Added pci_cfg_rev_read. It takes a 32 bit value from offset 0 and returns a value of the specified size using bytes starting from the specified offset. Offsets 4,5, & 6 wrap around to 0,1, & 2 respectively. The result bytes are in flipped order as required by the read method (so a value of 0x12345678 is returned as 0x78563412) A real Power Mac 8600 might return a random byte for offset 4, 5, 6 for vci0 but usually not for pci1. A B&W G3 seems to always wrap around correctly. We won't read random bytes, and we won't read a default such as 00 or FF. We'll do the wrap around which makes the most sense because writing 0x12345678 to any offset and reading from the same offset should produce the value that was written. - Added pci_cfg_rev_write. It takes a 32 bit value from offset 0, and modifies a specified number of bytes starting at a specified offset with the offset wrapping around to 0 if it exceeds 3. The modified bytes take their new values from the flipped bytes passed to pci_cfg_write. When size is 4, the original value is not used since all bytes will be modified. Basically, those two functions handle all the sizes and all the offsets and replace calls to BYTESWAP_32, read_mem or read_mem_rev, and write_mem or write_mem_rev. read_mem_rev, as it was used by pcidevice and some other places, could read beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always read the wrong byte or word if they were not at offset 0. Same for read_mem as used by mpc106. write_mem_rev, as it was used by pcidevice and some other places, could write beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always write the wrong byte or word if they were not at offset 0. Same for write_mem as used by mpc106. pcidevice: - The logging macros should be used to handle all config register access logging. - Unaligned PCI config register accesses will be output as ERROR instead of WARNING. - The logging macros include the offset and size. They also include the value for named registers or for writes. - Added MMIODevice read and write methods so that PCIDevice is not abstract if a PCIDevice doesn't override the read and write method since some PCIDevices don't have MMIO. pcihost: - Added pci_find_device stub for handling PCI bridges in future commit. bandit and mpc106: - PCI host controllers will handle all PCI config access alignment and sizing. A PCIDevice will always access config registers as 32 bits on a 4 byte boundary. The AccessDetails passed to a PCIDevice config read or write method is there only for logging purposes. bandit: - Common MMIO code is moved to new BanditHost class so both Bandit and Chaos can use it. PCI related code is moved to new BanditPCI class. - Simplify IDSEL to/from PCI device number conversion by removing the shift or subtract. - Remove BANDIT_ID_SEL check. The IDSEL conversion to PCI device number can find the bandit PCI device. - For logging, make best guess of PCI device number from invalid IDSEL - the result is always reasonable for device 0x00 to 0x0A when accessing config register 0x00 (as one would do when scanning for PCI devices like lspci does). mpc106: - Common config space code is put in cfg_setup. It handles extracting the offset. - Added code to log access to unimplemented config registers of grackle. - Don't call setup_ram when writing to config registers that setup_ram doesn't use. - pci_cfg_read calls READ_DWORD_LE_A and pci_cfg_write calls WRITE_DWORD_LE_A. When reading or writing memory that is organized as little endian dwords, such as my_pci_cfg_hdr of mpc106, the function should explicitly state that it's little endian so that the emulator may be ported one day to a CPU architecture that is not little endian. atirage: - The changes correctly place user_cfg at byte 0x40 instead of 0x43 and writes the correct byte depending on size and offset.
2022-09-02 10:32:28 +00:00
}
bandit: refactor host read and write methods.
2023-02-01 15:21:49 +00:00
// verbose fine aka 16MB memory regions
for (mask = 0x1, bit_pos = 0; mask != 0x10000UL; mask <<= 1, bit_pos++) {
if (this->addr_mask & mask) {
uint32_t start_addr = (bit_pos << 24) + 0xF0000000UL;
LOG_F(INFO, "- 0x%X ... 0x%X", start_addr, start_addr + 0x00FFFFFFU);
}
Fix PCI config r/w of byte and word and unaligned. dingusppc could not read bytes from offset 1,2,3 or words from offset 2. dingusppc did not read words from offset 1,3 and longs from offset 1,2,3 in the same way as a real Power Mac 8600 or B&W G3. This commit fixes those issues. - Added pci_cfg_rev_read. It takes a 32 bit value from offset 0 and returns a value of the specified size using bytes starting from the specified offset. Offsets 4,5, & 6 wrap around to 0,1, & 2 respectively. The result bytes are in flipped order as required by the read method (so a value of 0x12345678 is returned as 0x78563412) A real Power Mac 8600 might return a random byte for offset 4, 5, 6 for vci0 but usually not for pci1. A B&W G3 seems to always wrap around correctly. We won't read random bytes, and we won't read a default such as 00 or FF. We'll do the wrap around which makes the most sense because writing 0x12345678 to any offset and reading from the same offset should produce the value that was written. - Added pci_cfg_rev_write. It takes a 32 bit value from offset 0, and modifies a specified number of bytes starting at a specified offset with the offset wrapping around to 0 if it exceeds 3. The modified bytes take their new values from the flipped bytes passed to pci_cfg_write. When size is 4, the original value is not used since all bytes will be modified. Basically, those two functions handle all the sizes and all the offsets and replace calls to BYTESWAP_32, read_mem or read_mem_rev, and write_mem or write_mem_rev. read_mem_rev, as it was used by pcidevice and some other places, could read beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always read the wrong byte or word if they were not at offset 0. Same for read_mem as used by mpc106. write_mem_rev, as it was used by pcidevice and some other places, could write beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always write the wrong byte or word if they were not at offset 0. Same for write_mem as used by mpc106. pcidevice: - The logging macros should be used to handle all config register access logging. - Unaligned PCI config register accesses will be output as ERROR instead of WARNING. - The logging macros include the offset and size. They also include the value for named registers or for writes. - Added MMIODevice read and write methods so that PCIDevice is not abstract if a PCIDevice doesn't override the read and write method since some PCIDevices don't have MMIO. pcihost: - Added pci_find_device stub for handling PCI bridges in future commit. bandit and mpc106: - PCI host controllers will handle all PCI config access alignment and sizing. A PCIDevice will always access config registers as 32 bits on a 4 byte boundary. The AccessDetails passed to a PCIDevice config read or write method is there only for logging purposes. bandit: - Common MMIO code is moved to new BanditHost class so both Bandit and Chaos can use it. PCI related code is moved to new BanditPCI class. - Simplify IDSEL to/from PCI device number conversion by removing the shift or subtract. - Remove BANDIT_ID_SEL check. The IDSEL conversion to PCI device number can find the bandit PCI device. - For logging, make best guess of PCI device number from invalid IDSEL - the result is always reasonable for device 0x00 to 0x0A when accessing config register 0x00 (as one would do when scanning for PCI devices like lspci does). mpc106: - Common config space code is put in cfg_setup. It handles extracting the offset. - Added code to log access to unimplemented config registers of grackle. - Don't call setup_ram when writing to config registers that setup_ram doesn't use. - pci_cfg_read calls READ_DWORD_LE_A and pci_cfg_write calls WRITE_DWORD_LE_A. When reading or writing memory that is organized as little endian dwords, such as my_pci_cfg_hdr of mpc106, the function should explicitly state that it's little endian so that the emulator may be ported one day to a CPU architecture that is not little endian. atirage: - The changes correctly place user_cfg at byte 0x40 instead of 0x43 and writes the correct byte depending on size and offset.
2022-09-02 10:32:28 +00:00
}
}
Initial emulation of the Bandit ARBus-to-PCI bridge.
2022-01-16 21:47:04 +00:00
Fix PCI config r/w of byte and word and unaligned. dingusppc could not read bytes from offset 1,2,3 or words from offset 2. dingusppc did not read words from offset 1,3 and longs from offset 1,2,3 in the same way as a real Power Mac 8600 or B&W G3. This commit fixes those issues. - Added pci_cfg_rev_read. It takes a 32 bit value from offset 0 and returns a value of the specified size using bytes starting from the specified offset. Offsets 4,5, & 6 wrap around to 0,1, & 2 respectively. The result bytes are in flipped order as required by the read method (so a value of 0x12345678 is returned as 0x78563412) A real Power Mac 8600 might return a random byte for offset 4, 5, 6 for vci0 but usually not for pci1. A B&W G3 seems to always wrap around correctly. We won't read random bytes, and we won't read a default such as 00 or FF. We'll do the wrap around which makes the most sense because writing 0x12345678 to any offset and reading from the same offset should produce the value that was written. - Added pci_cfg_rev_write. It takes a 32 bit value from offset 0, and modifies a specified number of bytes starting at a specified offset with the offset wrapping around to 0 if it exceeds 3. The modified bytes take their new values from the flipped bytes passed to pci_cfg_write. When size is 4, the original value is not used since all bytes will be modified. Basically, those two functions handle all the sizes and all the offsets and replace calls to BYTESWAP_32, read_mem or read_mem_rev, and write_mem or write_mem_rev. read_mem_rev, as it was used by pcidevice and some other places, could read beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always read the wrong byte or word if they were not at offset 0. Same for read_mem as used by mpc106. write_mem_rev, as it was used by pcidevice and some other places, could write beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always write the wrong byte or word if they were not at offset 0. Same for write_mem as used by mpc106. pcidevice: - The logging macros should be used to handle all config register access logging. - Unaligned PCI config register accesses will be output as ERROR instead of WARNING. - The logging macros include the offset and size. They also include the value for named registers or for writes. - Added MMIODevice read and write methods so that PCIDevice is not abstract if a PCIDevice doesn't override the read and write method since some PCIDevices don't have MMIO. pcihost: - Added pci_find_device stub for handling PCI bridges in future commit. bandit and mpc106: - PCI host controllers will handle all PCI config access alignment and sizing. A PCIDevice will always access config registers as 32 bits on a 4 byte boundary. The AccessDetails passed to a PCIDevice config read or write method is there only for logging purposes. bandit: - Common MMIO code is moved to new BanditHost class so both Bandit and Chaos can use it. PCI related code is moved to new BanditPCI class. - Simplify IDSEL to/from PCI device number conversion by removing the shift or subtract. - Remove BANDIT_ID_SEL check. The IDSEL conversion to PCI device number can find the bandit PCI device. - For logging, make best guess of PCI device number from invalid IDSEL - the result is always reasonable for device 0x00 to 0x0A when accessing config register 0x00 (as one would do when scanning for PCI devices like lspci does). mpc106: - Common config space code is put in cfg_setup. It handles extracting the offset. - Added code to log access to unimplemented config registers of grackle. - Don't call setup_ram when writing to config registers that setup_ram doesn't use. - pci_cfg_read calls READ_DWORD_LE_A and pci_cfg_write calls WRITE_DWORD_LE_A. When reading or writing memory that is organized as little endian dwords, such as my_pci_cfg_hdr of mpc106, the function should explicitly state that it's little endian so that the emulator may be ported one day to a CPU architecture that is not little endian. atirage: - The changes correctly place user_cfg at byte 0x40 instead of 0x43 and writes the correct byte depending on size and offset.
2022-09-02 10:32:28 +00:00
uint32_t BanditHost::read(uint32_t rgn_start, uint32_t offset, int size)
{
bandit: refactor host read and write methods.
2023-02-01 15:21:49 +00:00
uint32_t idsel, result;
Fix PCI config r/w of byte and word and unaligned. dingusppc could not read bytes from offset 1,2,3 or words from offset 2. dingusppc did not read words from offset 1,3 and longs from offset 1,2,3 in the same way as a real Power Mac 8600 or B&W G3. This commit fixes those issues. - Added pci_cfg_rev_read. It takes a 32 bit value from offset 0 and returns a value of the specified size using bytes starting from the specified offset. Offsets 4,5, & 6 wrap around to 0,1, & 2 respectively. The result bytes are in flipped order as required by the read method (so a value of 0x12345678 is returned as 0x78563412) A real Power Mac 8600 might return a random byte for offset 4, 5, 6 for vci0 but usually not for pci1. A B&W G3 seems to always wrap around correctly. We won't read random bytes, and we won't read a default such as 00 or FF. We'll do the wrap around which makes the most sense because writing 0x12345678 to any offset and reading from the same offset should produce the value that was written. - Added pci_cfg_rev_write. It takes a 32 bit value from offset 0, and modifies a specified number of bytes starting at a specified offset with the offset wrapping around to 0 if it exceeds 3. The modified bytes take their new values from the flipped bytes passed to pci_cfg_write. When size is 4, the original value is not used since all bytes will be modified. Basically, those two functions handle all the sizes and all the offsets and replace calls to BYTESWAP_32, read_mem or read_mem_rev, and write_mem or write_mem_rev. read_mem_rev, as it was used by pcidevice and some other places, could read beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always read the wrong byte or word if they were not at offset 0. Same for read_mem as used by mpc106. write_mem_rev, as it was used by pcidevice and some other places, could write beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always write the wrong byte or word if they were not at offset 0. Same for write_mem as used by mpc106. pcidevice: - The logging macros should be used to handle all config register access logging. - Unaligned PCI config register accesses will be output as ERROR instead of WARNING. - The logging macros include the offset and size. They also include the value for named registers or for writes. - Added MMIODevice read and write methods so that PCIDevice is not abstract if a PCIDevice doesn't override the read and write method since some PCIDevices don't have MMIO. pcihost: - Added pci_find_device stub for handling PCI bridges in future commit. bandit and mpc106: - PCI host controllers will handle all PCI config access alignment and sizing. A PCIDevice will always access config registers as 32 bits on a 4 byte boundary. The AccessDetails passed to a PCIDevice config read or write method is there only for logging purposes. bandit: - Common MMIO code is moved to new BanditHost class so both Bandit and Chaos can use it. PCI related code is moved to new BanditPCI class. - Simplify IDSEL to/from PCI device number conversion by removing the shift or subtract. - Remove BANDIT_ID_SEL check. The IDSEL conversion to PCI device number can find the bandit PCI device. - For logging, make best guess of PCI device number from invalid IDSEL - the result is always reasonable for device 0x00 to 0x0A when accessing config register 0x00 (as one would do when scanning for PCI devices like lspci does). mpc106: - Common config space code is put in cfg_setup. It handles extracting the offset. - Added code to log access to unimplemented config registers of grackle. - Don't call setup_ram when writing to config registers that setup_ram doesn't use. - pci_cfg_read calls READ_DWORD_LE_A and pci_cfg_write calls WRITE_DWORD_LE_A. When reading or writing memory that is organized as little endian dwords, such as my_pci_cfg_hdr of mpc106, the function should explicitly state that it's little endian so that the emulator may be ported one day to a CPU architecture that is not little endian. atirage: - The changes correctly place user_cfg at byte 0x40 instead of 0x43 and writes the correct byte depending on size and offset.
2022-09-02 10:32:28 +00:00
switch (offset >> 22) {
bandit: refactor host read and write methods.
2023-02-01 15:21:49 +00:00
case 3: // CONFIG_DATA
if (this->config_addr & BANDIT_CAR_TYPE) { // type 1 configuration command
LOG_F(
WARNING, "%s: read config cycle type 1 not supported yet %02x:%02x.%x @%02x",
Corrections for refactors. - Macros need parenthesis to enforce operation order when expanded. - Fix device and register numbers in log messages. - Unmapped I/O space reads don't necessarily return 0xffffffff. That's only for config space reads. Just return 0. Unhandled I/O space read should probably cause a memory check (TEA - Transfer Error Acknowledge) exception as it does on a Power Mac 8600.
2023-02-02 10:40:35 +00:00
this->name.c_str(), BUS_NUM(), DEV_NUM(), FUN_NUM(), REG_NUM() + (offset & 3)
bandit: refactor host read and write methods.
2023-02-01 15:21:49 +00:00
);
return 0xFFFFFFFFUL; // PCI spec §6.1
}
Fix PCI config r/w of byte and word and unaligned. dingusppc could not read bytes from offset 1,2,3 or words from offset 2. dingusppc did not read words from offset 1,3 and longs from offset 1,2,3 in the same way as a real Power Mac 8600 or B&W G3. This commit fixes those issues. - Added pci_cfg_rev_read. It takes a 32 bit value from offset 0 and returns a value of the specified size using bytes starting from the specified offset. Offsets 4,5, & 6 wrap around to 0,1, & 2 respectively. The result bytes are in flipped order as required by the read method (so a value of 0x12345678 is returned as 0x78563412) A real Power Mac 8600 might return a random byte for offset 4, 5, 6 for vci0 but usually not for pci1. A B&W G3 seems to always wrap around correctly. We won't read random bytes, and we won't read a default such as 00 or FF. We'll do the wrap around which makes the most sense because writing 0x12345678 to any offset and reading from the same offset should produce the value that was written. - Added pci_cfg_rev_write. It takes a 32 bit value from offset 0, and modifies a specified number of bytes starting at a specified offset with the offset wrapping around to 0 if it exceeds 3. The modified bytes take their new values from the flipped bytes passed to pci_cfg_write. When size is 4, the original value is not used since all bytes will be modified. Basically, those two functions handle all the sizes and all the offsets and replace calls to BYTESWAP_32, read_mem or read_mem_rev, and write_mem or write_mem_rev. read_mem_rev, as it was used by pcidevice and some other places, could read beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always read the wrong byte or word if they were not at offset 0. Same for read_mem as used by mpc106. write_mem_rev, as it was used by pcidevice and some other places, could write beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always write the wrong byte or word if they were not at offset 0. Same for write_mem as used by mpc106. pcidevice: - The logging macros should be used to handle all config register access logging. - Unaligned PCI config register accesses will be output as ERROR instead of WARNING. - The logging macros include the offset and size. They also include the value for named registers or for writes. - Added MMIODevice read and write methods so that PCIDevice is not abstract if a PCIDevice doesn't override the read and write method since some PCIDevices don't have MMIO. pcihost: - Added pci_find_device stub for handling PCI bridges in future commit. bandit and mpc106: - PCI host controllers will handle all PCI config access alignment and sizing. A PCIDevice will always access config registers as 32 bits on a 4 byte boundary. The AccessDetails passed to a PCIDevice config read or write method is there only for logging purposes. bandit: - Common MMIO code is moved to new BanditHost class so both Bandit and Chaos can use it. PCI related code is moved to new BanditPCI class. - Simplify IDSEL to/from PCI device number conversion by removing the shift or subtract. - Remove BANDIT_ID_SEL check. The IDSEL conversion to PCI device number can find the bandit PCI device. - For logging, make best guess of PCI device number from invalid IDSEL - the result is always reasonable for device 0x00 to 0x0A when accessing config register 0x00 (as one would do when scanning for PCI devices like lspci does). mpc106: - Common config space code is put in cfg_setup. It handles extracting the offset. - Added code to log access to unimplemented config registers of grackle. - Don't call setup_ram when writing to config registers that setup_ram doesn't use. - pci_cfg_read calls READ_DWORD_LE_A and pci_cfg_write calls WRITE_DWORD_LE_A. When reading or writing memory that is organized as little endian dwords, such as my_pci_cfg_hdr of mpc106, the function should explicitly state that it's little endian so that the emulator may be ported one day to a CPU architecture that is not little endian. atirage: - The changes correctly place user_cfg at byte 0x40 instead of 0x43 and writes the correct byte depending on size and offset.
2022-09-02 10:32:28 +00:00
bandit: refactor host read and write methods.
2023-02-01 15:21:49 +00:00
idsel = (this->config_addr >> 11) & 0x1FFFFFU;
if (!SINGLE_BIT_SET(idsel)) {
LOG_F(ERROR, "%s: config_addr 0x%08x does not contain valid IDSEL",
this->name.c_str(), (uint32_t)this->config_addr);
return 0xFFFFFFFFUL; // PCI spec §6.1
}
Standardize PCIDevice slot_id for PCIHost. PCIHost - PCIHosts (bandit and grackle) now use device number and function number for identifying attached PCIDevices. A macro DEV_FUN is added to calculate this new slot_id. Bandit no longer uses IDSEL. Grackle no longer uses only device number. machinecatalyst, machinegossamer, machinetnt - Use DEV_FUN to attach PCI devices by device number and function number.
2023-02-05 08:37:29 +00:00
if (this->dev_map.count(IDSEL_TO_DEV_FUN(idsel))) {
Fix PCI config r/w of byte and word and unaligned. dingusppc could not read bytes from offset 1,2,3 or words from offset 2. dingusppc did not read words from offset 1,3 and longs from offset 1,2,3 in the same way as a real Power Mac 8600 or B&W G3. This commit fixes those issues. - Added pci_cfg_rev_read. It takes a 32 bit value from offset 0 and returns a value of the specified size using bytes starting from the specified offset. Offsets 4,5, & 6 wrap around to 0,1, & 2 respectively. The result bytes are in flipped order as required by the read method (so a value of 0x12345678 is returned as 0x78563412) A real Power Mac 8600 might return a random byte for offset 4, 5, 6 for vci0 but usually not for pci1. A B&W G3 seems to always wrap around correctly. We won't read random bytes, and we won't read a default such as 00 or FF. We'll do the wrap around which makes the most sense because writing 0x12345678 to any offset and reading from the same offset should produce the value that was written. - Added pci_cfg_rev_write. It takes a 32 bit value from offset 0, and modifies a specified number of bytes starting at a specified offset with the offset wrapping around to 0 if it exceeds 3. The modified bytes take their new values from the flipped bytes passed to pci_cfg_write. When size is 4, the original value is not used since all bytes will be modified. Basically, those two functions handle all the sizes and all the offsets and replace calls to BYTESWAP_32, read_mem or read_mem_rev, and write_mem or write_mem_rev. read_mem_rev, as it was used by pcidevice and some other places, could read beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always read the wrong byte or word if they were not at offset 0. Same for read_mem as used by mpc106. write_mem_rev, as it was used by pcidevice and some other places, could write beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always write the wrong byte or word if they were not at offset 0. Same for write_mem as used by mpc106. pcidevice: - The logging macros should be used to handle all config register access logging. - Unaligned PCI config register accesses will be output as ERROR instead of WARNING. - The logging macros include the offset and size. They also include the value for named registers or for writes. - Added MMIODevice read and write methods so that PCIDevice is not abstract if a PCIDevice doesn't override the read and write method since some PCIDevices don't have MMIO. pcihost: - Added pci_find_device stub for handling PCI bridges in future commit. bandit and mpc106: - PCI host controllers will handle all PCI config access alignment and sizing. A PCIDevice will always access config registers as 32 bits on a 4 byte boundary. The AccessDetails passed to a PCIDevice config read or write method is there only for logging purposes. bandit: - Common MMIO code is moved to new BanditHost class so both Bandit and Chaos can use it. PCI related code is moved to new BanditPCI class. - Simplify IDSEL to/from PCI device number conversion by removing the shift or subtract. - Remove BANDIT_ID_SEL check. The IDSEL conversion to PCI device number can find the bandit PCI device. - For logging, make best guess of PCI device number from invalid IDSEL - the result is always reasonable for device 0x00 to 0x0A when accessing config register 0x00 (as one would do when scanning for PCI devices like lspci does). mpc106: - Common config space code is put in cfg_setup. It handles extracting the offset. - Added code to log access to unimplemented config registers of grackle. - Don't call setup_ram when writing to config registers that setup_ram doesn't use. - pci_cfg_read calls READ_DWORD_LE_A and pci_cfg_write calls WRITE_DWORD_LE_A. When reading or writing memory that is organized as little endian dwords, such as my_pci_cfg_hdr of mpc106, the function should explicitly state that it's little endian so that the emulator may be ported one day to a CPU architecture that is not little endian. atirage: - The changes correctly place user_cfg at byte 0x40 instead of 0x43 and writes the correct byte depending on size and offset.
2022-09-02 10:32:28 +00:00
AccessDetails details;
bandit: refactor host read and write methods.
2023-02-01 15:21:49 +00:00
details.offset = offset & 3;
details.size = size;
details.flags = PCI_CONFIG_TYPE_0 | PCI_CONFIG_READ;
Standardize PCIDevice slot_id for PCIHost. PCIHost - PCIHosts (bandit and grackle) now use device number and function number for identifying attached PCIDevices. A macro DEV_FUN is added to calculate this new slot_id. Bandit no longer uses IDSEL. Grackle no longer uses only device number. machinecatalyst, machinegossamer, machinetnt - Use DEV_FUN to attach PCI devices by device number and function number.
2023-02-05 08:37:29 +00:00
result = this->dev_map[IDSEL_TO_DEV_FUN(idsel)]->pci_cfg_read(REG_NUM(), details);
Rename data conversion helpers for PCI config. Reword some descriptions for better understanding.
2023-02-02 01:21:23 +00:00
return pci_conv_rd_data(result, details);
bandit: refactor host read and write methods.
2023-02-01 15:21:49 +00:00
} else {
LOG_F(
ERROR, "%s err: read attempt from non-existing PCI device ??:%02x.%x @%02x",
Standardize PCIDevice slot_id for PCIHost. PCIHost - PCIHosts (bandit and grackle) now use device number and function number for identifying attached PCIDevices. A macro DEV_FUN is added to calculate this new slot_id. Bandit no longer uses IDSEL. Grackle no longer uses only device number. machinecatalyst, machinegossamer, machinetnt - Use DEV_FUN to attach PCI devices by device number and function number.
2023-02-05 08:37:29 +00:00
this->name.c_str(), IDSEL_TO_DEV_FUN(idsel), FUN_NUM(), REG_NUM() + (offset & 3)
bandit: refactor host read and write methods.
2023-02-01 15:21:49 +00:00
);
Fix PCI config r/w of byte and word and unaligned. dingusppc could not read bytes from offset 1,2,3 or words from offset 2. dingusppc did not read words from offset 1,3 and longs from offset 1,2,3 in the same way as a real Power Mac 8600 or B&W G3. This commit fixes those issues. - Added pci_cfg_rev_read. It takes a 32 bit value from offset 0 and returns a value of the specified size using bytes starting from the specified offset. Offsets 4,5, & 6 wrap around to 0,1, & 2 respectively. The result bytes are in flipped order as required by the read method (so a value of 0x12345678 is returned as 0x78563412) A real Power Mac 8600 might return a random byte for offset 4, 5, 6 for vci0 but usually not for pci1. A B&W G3 seems to always wrap around correctly. We won't read random bytes, and we won't read a default such as 00 or FF. We'll do the wrap around which makes the most sense because writing 0x12345678 to any offset and reading from the same offset should produce the value that was written. - Added pci_cfg_rev_write. It takes a 32 bit value from offset 0, and modifies a specified number of bytes starting at a specified offset with the offset wrapping around to 0 if it exceeds 3. The modified bytes take their new values from the flipped bytes passed to pci_cfg_write. When size is 4, the original value is not used since all bytes will be modified. Basically, those two functions handle all the sizes and all the offsets and replace calls to BYTESWAP_32, read_mem or read_mem_rev, and write_mem or write_mem_rev. read_mem_rev, as it was used by pcidevice and some other places, could read beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always read the wrong byte or word if they were not at offset 0. Same for read_mem as used by mpc106. write_mem_rev, as it was used by pcidevice and some other places, could write beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always write the wrong byte or word if they were not at offset 0. Same for write_mem as used by mpc106. pcidevice: - The logging macros should be used to handle all config register access logging. - Unaligned PCI config register accesses will be output as ERROR instead of WARNING. - The logging macros include the offset and size. They also include the value for named registers or for writes. - Added MMIODevice read and write methods so that PCIDevice is not abstract if a PCIDevice doesn't override the read and write method since some PCIDevices don't have MMIO. pcihost: - Added pci_find_device stub for handling PCI bridges in future commit. bandit and mpc106: - PCI host controllers will handle all PCI config access alignment and sizing. A PCIDevice will always access config registers as 32 bits on a 4 byte boundary. The AccessDetails passed to a PCIDevice config read or write method is there only for logging purposes. bandit: - Common MMIO code is moved to new BanditHost class so both Bandit and Chaos can use it. PCI related code is moved to new BanditPCI class. - Simplify IDSEL to/from PCI device number conversion by removing the shift or subtract. - Remove BANDIT_ID_SEL check. The IDSEL conversion to PCI device number can find the bandit PCI device. - For logging, make best guess of PCI device number from invalid IDSEL - the result is always reasonable for device 0x00 to 0x0A when accessing config register 0x00 (as one would do when scanning for PCI devices like lspci does). mpc106: - Common config space code is put in cfg_setup. It handles extracting the offset. - Added code to log access to unimplemented config registers of grackle. - Don't call setup_ram when writing to config registers that setup_ram doesn't use. - pci_cfg_read calls READ_DWORD_LE_A and pci_cfg_write calls WRITE_DWORD_LE_A. When reading or writing memory that is organized as little endian dwords, such as my_pci_cfg_hdr of mpc106, the function should explicitly state that it's little endian so that the emulator may be ported one day to a CPU architecture that is not little endian. atirage: - The changes correctly place user_cfg at byte 0x40 instead of 0x43 and writes the correct byte depending on size and offset.
2022-09-02 10:32:28 +00:00
return 0xFFFFFFFFUL; // PCI spec §6.1
bandit: refactor host read and write methods.
2023-02-01 15:21:49 +00:00
}
break;
Fix PCI config r/w of byte and word and unaligned. dingusppc could not read bytes from offset 1,2,3 or words from offset 2. dingusppc did not read words from offset 1,3 and longs from offset 1,2,3 in the same way as a real Power Mac 8600 or B&W G3. This commit fixes those issues. - Added pci_cfg_rev_read. It takes a 32 bit value from offset 0 and returns a value of the specified size using bytes starting from the specified offset. Offsets 4,5, & 6 wrap around to 0,1, & 2 respectively. The result bytes are in flipped order as required by the read method (so a value of 0x12345678 is returned as 0x78563412) A real Power Mac 8600 might return a random byte for offset 4, 5, 6 for vci0 but usually not for pci1. A B&W G3 seems to always wrap around correctly. We won't read random bytes, and we won't read a default such as 00 or FF. We'll do the wrap around which makes the most sense because writing 0x12345678 to any offset and reading from the same offset should produce the value that was written. - Added pci_cfg_rev_write. It takes a 32 bit value from offset 0, and modifies a specified number of bytes starting at a specified offset with the offset wrapping around to 0 if it exceeds 3. The modified bytes take their new values from the flipped bytes passed to pci_cfg_write. When size is 4, the original value is not used since all bytes will be modified. Basically, those two functions handle all the sizes and all the offsets and replace calls to BYTESWAP_32, read_mem or read_mem_rev, and write_mem or write_mem_rev. read_mem_rev, as it was used by pcidevice and some other places, could read beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always read the wrong byte or word if they were not at offset 0. Same for read_mem as used by mpc106. write_mem_rev, as it was used by pcidevice and some other places, could write beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always write the wrong byte or word if they were not at offset 0. Same for write_mem as used by mpc106. pcidevice: - The logging macros should be used to handle all config register access logging. - Unaligned PCI config register accesses will be output as ERROR instead of WARNING. - The logging macros include the offset and size. They also include the value for named registers or for writes. - Added MMIODevice read and write methods so that PCIDevice is not abstract if a PCIDevice doesn't override the read and write method since some PCIDevices don't have MMIO. pcihost: - Added pci_find_device stub for handling PCI bridges in future commit. bandit and mpc106: - PCI host controllers will handle all PCI config access alignment and sizing. A PCIDevice will always access config registers as 32 bits on a 4 byte boundary. The AccessDetails passed to a PCIDevice config read or write method is there only for logging purposes. bandit: - Common MMIO code is moved to new BanditHost class so both Bandit and Chaos can use it. PCI related code is moved to new BanditPCI class. - Simplify IDSEL to/from PCI device number conversion by removing the shift or subtract. - Remove BANDIT_ID_SEL check. The IDSEL conversion to PCI device number can find the bandit PCI device. - For logging, make best guess of PCI device number from invalid IDSEL - the result is always reasonable for device 0x00 to 0x0A when accessing config register 0x00 (as one would do when scanning for PCI devices like lspci does). mpc106: - Common config space code is put in cfg_setup. It handles extracting the offset. - Added code to log access to unimplemented config registers of grackle. - Don't call setup_ram when writing to config registers that setup_ram doesn't use. - pci_cfg_read calls READ_DWORD_LE_A and pci_cfg_write calls WRITE_DWORD_LE_A. When reading or writing memory that is organized as little endian dwords, such as my_pci_cfg_hdr of mpc106, the function should explicitly state that it's little endian so that the emulator may be ported one day to a CPU architecture that is not little endian. atirage: - The changes correctly place user_cfg at byte 0x40 instead of 0x43 and writes the correct byte depending on size and offset.
2022-09-02 10:32:28 +00:00
bandit: refactor host read and write methods.
2023-02-01 15:21:49 +00:00
case 2: // CONFIG_ADDR
return BYTESWAP_32(this->config_addr);
default: // I/O space
// broadcast I/O request to devices that support I/O space
// until a device returns true that means "request accepted"
for (auto& dev : this->io_space_devs) {
if (dev->pci_io_read(offset, size, &result))
return result;
Bandit: implement I/O space transactions.
2022-04-13 20:39:29 +00:00
}
bandit: refactor host read and write methods.
2023-02-01 15:21:49 +00:00
LOG_F(ERROR, "%s: attempt to read from unmapped PCI I/O space, offset=0x%X",
this->name.c_str(), offset);
Corrections for refactors. - Macros need parenthesis to enforce operation order when expanded. - Fix device and register numbers in log messages. - Unmapped I/O space reads don't necessarily return 0xffffffff. That's only for config space reads. Just return 0. Unhandled I/O space read should probably cause a memory check (TEA - Transfer Error Acknowledge) exception as it does on a Power Mac 8600.
2023-02-02 10:40:35 +00:00
// FIXME: add machine check exception (DEFAULT CATCH!, code=FFF00200)
return 0;
Initial emulation of the Bandit ARBus-to-PCI bridge.
2022-01-16 21:47:04 +00:00
}
}
Fix PCI config r/w of byte and word and unaligned. dingusppc could not read bytes from offset 1,2,3 or words from offset 2. dingusppc did not read words from offset 1,3 and longs from offset 1,2,3 in the same way as a real Power Mac 8600 or B&W G3. This commit fixes those issues. - Added pci_cfg_rev_read. It takes a 32 bit value from offset 0 and returns a value of the specified size using bytes starting from the specified offset. Offsets 4,5, & 6 wrap around to 0,1, & 2 respectively. The result bytes are in flipped order as required by the read method (so a value of 0x12345678 is returned as 0x78563412) A real Power Mac 8600 might return a random byte for offset 4, 5, 6 for vci0 but usually not for pci1. A B&W G3 seems to always wrap around correctly. We won't read random bytes, and we won't read a default such as 00 or FF. We'll do the wrap around which makes the most sense because writing 0x12345678 to any offset and reading from the same offset should produce the value that was written. - Added pci_cfg_rev_write. It takes a 32 bit value from offset 0, and modifies a specified number of bytes starting at a specified offset with the offset wrapping around to 0 if it exceeds 3. The modified bytes take their new values from the flipped bytes passed to pci_cfg_write. When size is 4, the original value is not used since all bytes will be modified. Basically, those two functions handle all the sizes and all the offsets and replace calls to BYTESWAP_32, read_mem or read_mem_rev, and write_mem or write_mem_rev. read_mem_rev, as it was used by pcidevice and some other places, could read beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always read the wrong byte or word if they were not at offset 0. Same for read_mem as used by mpc106. write_mem_rev, as it was used by pcidevice and some other places, could write beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always write the wrong byte or word if they were not at offset 0. Same for write_mem as used by mpc106. pcidevice: - The logging macros should be used to handle all config register access logging. - Unaligned PCI config register accesses will be output as ERROR instead of WARNING. - The logging macros include the offset and size. They also include the value for named registers or for writes. - Added MMIODevice read and write methods so that PCIDevice is not abstract if a PCIDevice doesn't override the read and write method since some PCIDevices don't have MMIO. pcihost: - Added pci_find_device stub for handling PCI bridges in future commit. bandit and mpc106: - PCI host controllers will handle all PCI config access alignment and sizing. A PCIDevice will always access config registers as 32 bits on a 4 byte boundary. The AccessDetails passed to a PCIDevice config read or write method is there only for logging purposes. bandit: - Common MMIO code is moved to new BanditHost class so both Bandit and Chaos can use it. PCI related code is moved to new BanditPCI class. - Simplify IDSEL to/from PCI device number conversion by removing the shift or subtract. - Remove BANDIT_ID_SEL check. The IDSEL conversion to PCI device number can find the bandit PCI device. - For logging, make best guess of PCI device number from invalid IDSEL - the result is always reasonable for device 0x00 to 0x0A when accessing config register 0x00 (as one would do when scanning for PCI devices like lspci does). mpc106: - Common config space code is put in cfg_setup. It handles extracting the offset. - Added code to log access to unimplemented config registers of grackle. - Don't call setup_ram when writing to config registers that setup_ram doesn't use. - pci_cfg_read calls READ_DWORD_LE_A and pci_cfg_write calls WRITE_DWORD_LE_A. When reading or writing memory that is organized as little endian dwords, such as my_pci_cfg_hdr of mpc106, the function should explicitly state that it's little endian so that the emulator may be ported one day to a CPU architecture that is not little endian. atirage: - The changes correctly place user_cfg at byte 0x40 instead of 0x43 and writes the correct byte depending on size and offset.
2022-09-02 10:32:28 +00:00
void BanditHost::write(uint32_t rgn_start, uint32_t offset, uint32_t value, int size)
Initial emulation of the Bandit ARBus-to-PCI bridge.
2022-01-16 21:47:04 +00:00
{
bandit: refactor host read and write methods.
2023-02-01 15:21:49 +00:00
uint32_t idsel;
Fix PCI config r/w of byte and word and unaligned. dingusppc could not read bytes from offset 1,2,3 or words from offset 2. dingusppc did not read words from offset 1,3 and longs from offset 1,2,3 in the same way as a real Power Mac 8600 or B&W G3. This commit fixes those issues. - Added pci_cfg_rev_read. It takes a 32 bit value from offset 0 and returns a value of the specified size using bytes starting from the specified offset. Offsets 4,5, & 6 wrap around to 0,1, & 2 respectively. The result bytes are in flipped order as required by the read method (so a value of 0x12345678 is returned as 0x78563412) A real Power Mac 8600 might return a random byte for offset 4, 5, 6 for vci0 but usually not for pci1. A B&W G3 seems to always wrap around correctly. We won't read random bytes, and we won't read a default such as 00 or FF. We'll do the wrap around which makes the most sense because writing 0x12345678 to any offset and reading from the same offset should produce the value that was written. - Added pci_cfg_rev_write. It takes a 32 bit value from offset 0, and modifies a specified number of bytes starting at a specified offset with the offset wrapping around to 0 if it exceeds 3. The modified bytes take their new values from the flipped bytes passed to pci_cfg_write. When size is 4, the original value is not used since all bytes will be modified. Basically, those two functions handle all the sizes and all the offsets and replace calls to BYTESWAP_32, read_mem or read_mem_rev, and write_mem or write_mem_rev. read_mem_rev, as it was used by pcidevice and some other places, could read beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always read the wrong byte or word if they were not at offset 0. Same for read_mem as used by mpc106. write_mem_rev, as it was used by pcidevice and some other places, could write beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always write the wrong byte or word if they were not at offset 0. Same for write_mem as used by mpc106. pcidevice: - The logging macros should be used to handle all config register access logging. - Unaligned PCI config register accesses will be output as ERROR instead of WARNING. - The logging macros include the offset and size. They also include the value for named registers or for writes. - Added MMIODevice read and write methods so that PCIDevice is not abstract if a PCIDevice doesn't override the read and write method since some PCIDevices don't have MMIO. pcihost: - Added pci_find_device stub for handling PCI bridges in future commit. bandit and mpc106: - PCI host controllers will handle all PCI config access alignment and sizing. A PCIDevice will always access config registers as 32 bits on a 4 byte boundary. The AccessDetails passed to a PCIDevice config read or write method is there only for logging purposes. bandit: - Common MMIO code is moved to new BanditHost class so both Bandit and Chaos can use it. PCI related code is moved to new BanditPCI class. - Simplify IDSEL to/from PCI device number conversion by removing the shift or subtract. - Remove BANDIT_ID_SEL check. The IDSEL conversion to PCI device number can find the bandit PCI device. - For logging, make best guess of PCI device number from invalid IDSEL - the result is always reasonable for device 0x00 to 0x0A when accessing config register 0x00 (as one would do when scanning for PCI devices like lspci does). mpc106: - Common config space code is put in cfg_setup. It handles extracting the offset. - Added code to log access to unimplemented config registers of grackle. - Don't call setup_ram when writing to config registers that setup_ram doesn't use. - pci_cfg_read calls READ_DWORD_LE_A and pci_cfg_write calls WRITE_DWORD_LE_A. When reading or writing memory that is organized as little endian dwords, such as my_pci_cfg_hdr of mpc106, the function should explicitly state that it's little endian so that the emulator may be ported one day to a CPU architecture that is not little endian. atirage: - The changes correctly place user_cfg at byte 0x40 instead of 0x43 and writes the correct byte depending on size and offset.
2022-09-02 10:32:28 +00:00
switch (offset >> 22) {
bandit: refactor host read and write methods.
2023-02-01 15:21:49 +00:00
case 3: // CONFIG_DATA
if (this->config_addr & BANDIT_CAR_TYPE) { // type 1 configuration command
LOG_F(
WARNING, "%s: write config cycle type 1 not supported yet %02x:%02x.%x @%02x",
Corrections for refactors. - Macros need parenthesis to enforce operation order when expanded. - Fix device and register numbers in log messages. - Unmapped I/O space reads don't necessarily return 0xffffffff. That's only for config space reads. Just return 0. Unhandled I/O space read should probably cause a memory check (TEA - Transfer Error Acknowledge) exception as it does on a Power Mac 8600.
2023-02-02 10:40:35 +00:00
this->name.c_str(), BUS_NUM(), DEV_NUM(), FUN_NUM(), REG_NUM() + (offset & 3)
bandit: refactor host read and write methods.
2023-02-01 15:21:49 +00:00
);
return;
}
Fix PCI config r/w of byte and word and unaligned. dingusppc could not read bytes from offset 1,2,3 or words from offset 2. dingusppc did not read words from offset 1,3 and longs from offset 1,2,3 in the same way as a real Power Mac 8600 or B&W G3. This commit fixes those issues. - Added pci_cfg_rev_read. It takes a 32 bit value from offset 0 and returns a value of the specified size using bytes starting from the specified offset. Offsets 4,5, & 6 wrap around to 0,1, & 2 respectively. The result bytes are in flipped order as required by the read method (so a value of 0x12345678 is returned as 0x78563412) A real Power Mac 8600 might return a random byte for offset 4, 5, 6 for vci0 but usually not for pci1. A B&W G3 seems to always wrap around correctly. We won't read random bytes, and we won't read a default such as 00 or FF. We'll do the wrap around which makes the most sense because writing 0x12345678 to any offset and reading from the same offset should produce the value that was written. - Added pci_cfg_rev_write. It takes a 32 bit value from offset 0, and modifies a specified number of bytes starting at a specified offset with the offset wrapping around to 0 if it exceeds 3. The modified bytes take their new values from the flipped bytes passed to pci_cfg_write. When size is 4, the original value is not used since all bytes will be modified. Basically, those two functions handle all the sizes and all the offsets and replace calls to BYTESWAP_32, read_mem or read_mem_rev, and write_mem or write_mem_rev. read_mem_rev, as it was used by pcidevice and some other places, could read beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always read the wrong byte or word if they were not at offset 0. Same for read_mem as used by mpc106. write_mem_rev, as it was used by pcidevice and some other places, could write beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always write the wrong byte or word if they were not at offset 0. Same for write_mem as used by mpc106. pcidevice: - The logging macros should be used to handle all config register access logging. - Unaligned PCI config register accesses will be output as ERROR instead of WARNING. - The logging macros include the offset and size. They also include the value for named registers or for writes. - Added MMIODevice read and write methods so that PCIDevice is not abstract if a PCIDevice doesn't override the read and write method since some PCIDevices don't have MMIO. pcihost: - Added pci_find_device stub for handling PCI bridges in future commit. bandit and mpc106: - PCI host controllers will handle all PCI config access alignment and sizing. A PCIDevice will always access config registers as 32 bits on a 4 byte boundary. The AccessDetails passed to a PCIDevice config read or write method is there only for logging purposes. bandit: - Common MMIO code is moved to new BanditHost class so both Bandit and Chaos can use it. PCI related code is moved to new BanditPCI class. - Simplify IDSEL to/from PCI device number conversion by removing the shift or subtract. - Remove BANDIT_ID_SEL check. The IDSEL conversion to PCI device number can find the bandit PCI device. - For logging, make best guess of PCI device number from invalid IDSEL - the result is always reasonable for device 0x00 to 0x0A when accessing config register 0x00 (as one would do when scanning for PCI devices like lspci does). mpc106: - Common config space code is put in cfg_setup. It handles extracting the offset. - Added code to log access to unimplemented config registers of grackle. - Don't call setup_ram when writing to config registers that setup_ram doesn't use. - pci_cfg_read calls READ_DWORD_LE_A and pci_cfg_write calls WRITE_DWORD_LE_A. When reading or writing memory that is organized as little endian dwords, such as my_pci_cfg_hdr of mpc106, the function should explicitly state that it's little endian so that the emulator may be ported one day to a CPU architecture that is not little endian. atirage: - The changes correctly place user_cfg at byte 0x40 instead of 0x43 and writes the correct byte depending on size and offset.
2022-09-02 10:32:28 +00:00
bandit: refactor host read and write methods.
2023-02-01 15:21:49 +00:00
idsel = (this->config_addr >> 11) & 0x1FFFFFU;
if (!SINGLE_BIT_SET(idsel)) {
LOG_F(ERROR, "%s: config_addr 0x%08x does not contain valid IDSEL",
this->name.c_str(), (uint32_t)this->config_addr);
return;
}
Standardize PCIDevice slot_id for PCIHost. PCIHost - PCIHosts (bandit and grackle) now use device number and function number for identifying attached PCIDevices. A macro DEV_FUN is added to calculate this new slot_id. Bandit no longer uses IDSEL. Grackle no longer uses only device number. machinecatalyst, machinegossamer, machinetnt - Use DEV_FUN to attach PCI devices by device number and function number.
2023-02-05 08:37:29 +00:00
if (this->dev_map.count(IDSEL_TO_DEV_FUN(idsel))) {
Fix PCI config r/w of byte and word and unaligned. dingusppc could not read bytes from offset 1,2,3 or words from offset 2. dingusppc did not read words from offset 1,3 and longs from offset 1,2,3 in the same way as a real Power Mac 8600 or B&W G3. This commit fixes those issues. - Added pci_cfg_rev_read. It takes a 32 bit value from offset 0 and returns a value of the specified size using bytes starting from the specified offset. Offsets 4,5, & 6 wrap around to 0,1, & 2 respectively. The result bytes are in flipped order as required by the read method (so a value of 0x12345678 is returned as 0x78563412) A real Power Mac 8600 might return a random byte for offset 4, 5, 6 for vci0 but usually not for pci1. A B&W G3 seems to always wrap around correctly. We won't read random bytes, and we won't read a default such as 00 or FF. We'll do the wrap around which makes the most sense because writing 0x12345678 to any offset and reading from the same offset should produce the value that was written. - Added pci_cfg_rev_write. It takes a 32 bit value from offset 0, and modifies a specified number of bytes starting at a specified offset with the offset wrapping around to 0 if it exceeds 3. The modified bytes take their new values from the flipped bytes passed to pci_cfg_write. When size is 4, the original value is not used since all bytes will be modified. Basically, those two functions handle all the sizes and all the offsets and replace calls to BYTESWAP_32, read_mem or read_mem_rev, and write_mem or write_mem_rev. read_mem_rev, as it was used by pcidevice and some other places, could read beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always read the wrong byte or word if they were not at offset 0. Same for read_mem as used by mpc106. write_mem_rev, as it was used by pcidevice and some other places, could write beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always write the wrong byte or word if they were not at offset 0. Same for write_mem as used by mpc106. pcidevice: - The logging macros should be used to handle all config register access logging. - Unaligned PCI config register accesses will be output as ERROR instead of WARNING. - The logging macros include the offset and size. They also include the value for named registers or for writes. - Added MMIODevice read and write methods so that PCIDevice is not abstract if a PCIDevice doesn't override the read and write method since some PCIDevices don't have MMIO. pcihost: - Added pci_find_device stub for handling PCI bridges in future commit. bandit and mpc106: - PCI host controllers will handle all PCI config access alignment and sizing. A PCIDevice will always access config registers as 32 bits on a 4 byte boundary. The AccessDetails passed to a PCIDevice config read or write method is there only for logging purposes. bandit: - Common MMIO code is moved to new BanditHost class so both Bandit and Chaos can use it. PCI related code is moved to new BanditPCI class. - Simplify IDSEL to/from PCI device number conversion by removing the shift or subtract. - Remove BANDIT_ID_SEL check. The IDSEL conversion to PCI device number can find the bandit PCI device. - For logging, make best guess of PCI device number from invalid IDSEL - the result is always reasonable for device 0x00 to 0x0A when accessing config register 0x00 (as one would do when scanning for PCI devices like lspci does). mpc106: - Common config space code is put in cfg_setup. It handles extracting the offset. - Added code to log access to unimplemented config registers of grackle. - Don't call setup_ram when writing to config registers that setup_ram doesn't use. - pci_cfg_read calls READ_DWORD_LE_A and pci_cfg_write calls WRITE_DWORD_LE_A. When reading or writing memory that is organized as little endian dwords, such as my_pci_cfg_hdr of mpc106, the function should explicitly state that it's little endian so that the emulator may be ported one day to a CPU architecture that is not little endian. atirage: - The changes correctly place user_cfg at byte 0x40 instead of 0x43 and writes the correct byte depending on size and offset.
2022-09-02 10:32:28 +00:00
AccessDetails details;
bandit: refactor host read and write methods.
2023-02-01 15:21:49 +00:00
details.offset = offset & 3;
details.size = size;
details.flags = PCI_CONFIG_TYPE_0 | PCI_CONFIG_WRITE;
if (size == 4 && !details.offset) { // aligned DWORD writes -> fast path
Standardize PCIDevice slot_id for PCIHost. PCIHost - PCIHosts (bandit and grackle) now use device number and function number for identifying attached PCIDevices. A macro DEV_FUN is added to calculate this new slot_id. Bandit no longer uses IDSEL. Grackle no longer uses only device number. machinecatalyst, machinegossamer, machinetnt - Use DEV_FUN to attach PCI devices by device number and function number.
2023-02-05 08:37:29 +00:00
this->dev_map[IDSEL_TO_DEV_FUN(idsel)]->pci_cfg_write(REG_NUM(), BYTESWAP_32(value), details);
bandit: refactor host read and write methods.
2023-02-01 15:21:49 +00:00
} else { // otherwise perform necessary data transformations -> slow path
Standardize PCIDevice slot_id for PCIHost. PCIHost - PCIHosts (bandit and grackle) now use device number and function number for identifying attached PCIDevices. A macro DEV_FUN is added to calculate this new slot_id. Bandit no longer uses IDSEL. Grackle no longer uses only device number. machinecatalyst, machinegossamer, machinetnt - Use DEV_FUN to attach PCI devices by device number and function number.
2023-02-05 08:37:29 +00:00
uint32_t old_val = this->dev_map[IDSEL_TO_DEV_FUN(idsel)]->pci_cfg_read(REG_NUM(), details);
Rename data conversion helpers for PCI config. Reword some descriptions for better understanding.
2023-02-02 01:21:23 +00:00
uint32_t new_val = pci_conv_wr_data(old_val, value, details);
Standardize PCIDevice slot_id for PCIHost. PCIHost - PCIHosts (bandit and grackle) now use device number and function number for identifying attached PCIDevices. A macro DEV_FUN is added to calculate this new slot_id. Bandit no longer uses IDSEL. Grackle no longer uses only device number. machinecatalyst, machinegossamer, machinetnt - Use DEV_FUN to attach PCI devices by device number and function number.
2023-02-05 08:37:29 +00:00
this->dev_map[IDSEL_TO_DEV_FUN(idsel)]->pci_cfg_write(REG_NUM(), new_val, details);
Refine Bandit config address handling.
2022-01-17 00:28:35 +00:00
}
bandit: refactor host read and write methods.
2023-02-01 15:21:49 +00:00
} else {
LOG_F(
ERROR, "%s err: write attempt to non-existing PCI device ??:%02x.%x @%02x",
Standardize PCIDevice slot_id for PCIHost. PCIHost - PCIHosts (bandit and grackle) now use device number and function number for identifying attached PCIDevices. A macro DEV_FUN is added to calculate this new slot_id. Bandit no longer uses IDSEL. Grackle no longer uses only device number. machinecatalyst, machinegossamer, machinetnt - Use DEV_FUN to attach PCI devices by device number and function number.
2023-02-05 08:37:29 +00:00
this->name.c_str(), IDSEL_TO_DEV_FUN(idsel), FUN_NUM(), REG_NUM() + (offset & 3)
bandit: refactor host read and write methods.
2023-02-01 15:21:49 +00:00
);
}
break;
case 2: // CONFIG_ADDR
this->config_addr = BYTESWAP_32(value);
break;
default: // I/O space
// broadcast I/O request to devices that support I/O space
// until a device returns true that means "request handled"
for (auto& dev : this->io_space_devs) {
if (dev->pci_io_write(offset, value, size))
return;
}
LOG_F(ERROR, "%s: attempt to read from unmapped PCI I/O space, offset=0x%X",
this->name.c_str(), offset);
Initial emulation of the Bandit ARBus-to-PCI bridge.
2022-01-16 21:47:04 +00:00
}
}
Bandit: implement address mask register.
2022-04-13 20:38:51 +00:00
bandit: refactor host read and write methods.
2023-02-01 15:21:49 +00:00
Bandit::Bandit(int bridge_num, std::string name, int dev_id, int rev)
: BanditHost()
Bandit: implement address mask register.
2022-04-13 20:38:51 +00:00
{
bandit: refactor host read and write methods.
2023-02-01 15:21:49 +00:00
this->name = name;
Bandit: implement address mask register.
2022-04-13 20:38:51 +00:00
bandit: refactor host read and write methods.
2023-02-01 15:21:49 +00:00
supports_types(HWCompType::PCI_HOST);
bandit: more config space registers.
2022-12-19 00:28:16 +00:00
bandit: refactor host read and write methods.
2023-02-01 15:21:49 +00:00
this->base_addr = 0xF0000000 + ((bridge_num & 3) << 25);
Bandit: implement address mask register.
2022-04-13 20:38:51 +00:00
bandit: refactor host read and write methods.
2023-02-01 15:21:49 +00:00
MemCtrlBase *mem_ctrl = dynamic_cast<MemCtrlBase *>
(gMachineObj->get_comp_by_type(HWCompType::MEM_CTRL));
Bandit: implement address mask register.
2022-04-13 20:38:51 +00:00
bandit: refactor host read and write methods.
2023-02-01 15:21:49 +00:00
// add memory mapped I/O region for Bandit control registers
// This region has the following layout:
// base_addr + 0x000000 --> I/O space
// base_addr + 0x800000 --> CONFIG_ADDR
// base_addr + 0xC00000 --> CONFIG_DATA
// base_addr + 0x1000000 --> pass-through memory space (not included below)
mem_ctrl->add_mmio_region(base_addr, 0x01000000, this);
// connnect Bandit PCI device
Corrections for refactors. - Macros need parenthesis to enforce operation order when expanded. - Fix device and register numbers in log messages. - Unmapped I/O space reads don't necessarily return 0xffffffff. That's only for config space reads. Just return 0. Unhandled I/O space read should probably cause a memory check (TEA - Transfer Error Acknowledge) exception as it does on a Power Mac 8600.
2023-02-02 10:40:35 +00:00
this->my_pci_device = unique_ptr<BanditPciDevice>(
bandit: refactor host read and write methods.
2023-02-01 15:21:49 +00:00
new BanditPciDevice(bridge_num, name, dev_id, rev)
);
Standardize PCIDevice slot_id for PCIHost. PCIHost - PCIHosts (bandit and grackle) now use device number and function number for identifying attached PCIDevices. A macro DEV_FUN is added to calculate this new slot_id. Bandit no longer uses IDSEL. Grackle no longer uses only device number. machinecatalyst, machinegossamer, machinetnt - Use DEV_FUN to attach PCI devices by device number and function number.
2023-02-05 08:37:29 +00:00
this->pci_register_device(DEV_FUN(BANDIT_DEV,0), this->my_pci_device.get());
Bandit: implement address mask register.
2022-04-13 20:38:51 +00:00
}
bandit: self-registration with the device registry.
2022-07-17 03:39:39 +00:00
Fix PCI config r/w of byte and word and unaligned. dingusppc could not read bytes from offset 1,2,3 or words from offset 2. dingusppc did not read words from offset 1,3 and longs from offset 1,2,3 in the same way as a real Power Mac 8600 or B&W G3. This commit fixes those issues. - Added pci_cfg_rev_read. It takes a 32 bit value from offset 0 and returns a value of the specified size using bytes starting from the specified offset. Offsets 4,5, & 6 wrap around to 0,1, & 2 respectively. The result bytes are in flipped order as required by the read method (so a value of 0x12345678 is returned as 0x78563412) A real Power Mac 8600 might return a random byte for offset 4, 5, 6 for vci0 but usually not for pci1. A B&W G3 seems to always wrap around correctly. We won't read random bytes, and we won't read a default such as 00 or FF. We'll do the wrap around which makes the most sense because writing 0x12345678 to any offset and reading from the same offset should produce the value that was written. - Added pci_cfg_rev_write. It takes a 32 bit value from offset 0, and modifies a specified number of bytes starting at a specified offset with the offset wrapping around to 0 if it exceeds 3. The modified bytes take their new values from the flipped bytes passed to pci_cfg_write. When size is 4, the original value is not used since all bytes will be modified. Basically, those two functions handle all the sizes and all the offsets and replace calls to BYTESWAP_32, read_mem or read_mem_rev, and write_mem or write_mem_rev. read_mem_rev, as it was used by pcidevice and some other places, could read beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always read the wrong byte or word if they were not at offset 0. Same for read_mem as used by mpc106. write_mem_rev, as it was used by pcidevice and some other places, could write beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always write the wrong byte or word if they were not at offset 0. Same for write_mem as used by mpc106. pcidevice: - The logging macros should be used to handle all config register access logging. - Unaligned PCI config register accesses will be output as ERROR instead of WARNING. - The logging macros include the offset and size. They also include the value for named registers or for writes. - Added MMIODevice read and write methods so that PCIDevice is not abstract if a PCIDevice doesn't override the read and write method since some PCIDevices don't have MMIO. pcihost: - Added pci_find_device stub for handling PCI bridges in future commit. bandit and mpc106: - PCI host controllers will handle all PCI config access alignment and sizing. A PCIDevice will always access config registers as 32 bits on a 4 byte boundary. The AccessDetails passed to a PCIDevice config read or write method is there only for logging purposes. bandit: - Common MMIO code is moved to new BanditHost class so both Bandit and Chaos can use it. PCI related code is moved to new BanditPCI class. - Simplify IDSEL to/from PCI device number conversion by removing the shift or subtract. - Remove BANDIT_ID_SEL check. The IDSEL conversion to PCI device number can find the bandit PCI device. - For logging, make best guess of PCI device number from invalid IDSEL - the result is always reasonable for device 0x00 to 0x0A when accessing config register 0x00 (as one would do when scanning for PCI devices like lspci does). mpc106: - Common config space code is put in cfg_setup. It handles extracting the offset. - Added code to log access to unimplemented config registers of grackle. - Don't call setup_ram when writing to config registers that setup_ram doesn't use. - pci_cfg_read calls READ_DWORD_LE_A and pci_cfg_write calls WRITE_DWORD_LE_A. When reading or writing memory that is organized as little endian dwords, such as my_pci_cfg_hdr of mpc106, the function should explicitly state that it's little endian so that the emulator may be ported one day to a CPU architecture that is not little endian. atirage: - The changes correctly place user_cfg at byte 0x40 instead of 0x43 and writes the correct byte depending on size and offset.
2022-09-02 10:32:28 +00:00
Chaos::Chaos(std::string name) : BanditHost()
bandit: add Chaos support.
2022-08-06 17:29:45 +00:00
{
Fix HWComponent name initialization. First, remove name override for subclasses of HWComponent (Chaos and ScsiBus) because HWComponent has its own name field. HWComponent name should be set as early as possible in the constructor so it can be used in log messages. PCIDevice should set name of HWComponent (through MMIODevice) in its constructor, using the name that is given to its constructor. For Bandit and Grackle, they don't need to set the HWComponent name since its PCIDevice constructor will now do it. Chaos is not a PCIDevice so it should set the MMIODevice name itself. Why does PCIDevice have a name that is separate from the HWComponent name?
2022-12-11 19:09:02 +00:00
this->name = name;
bandit: add Chaos support.
2022-08-06 17:29:45 +00:00
supports_types(HWCompType::PCI_HOST);
MemCtrlBase *mem_ctrl = dynamic_cast<MemCtrlBase *>
(gMachineObj->get_comp_by_type(HWCompType::MEM_CTRL));
// add memory mapped I/O region for Chaos control registers
// This region has the following layout:
// base_addr + 0x800000 --> CONFIG_ADDR
// base_addr + 0xC00000 --> CONFIG_DATA
mem_ctrl->add_mmio_region(0xF0000000UL, 0x01000000, this);
}
bandit: self-registration with the device registry.
2022-07-17 03:39:39 +00:00
static const DeviceDescription Bandit1_Descriptor = {
Bandit::create_first, {}, {}
};
bandit: add PSX style PCI bridge.
2022-12-18 22:40:56 +00:00
static const DeviceDescription PsxPci1_Descriptor = {
Bandit::create_psx_first, {}, {}
};
bandit: add Chaos support.
2022-08-06 17:29:45 +00:00
static const DeviceDescription Chaos_Descriptor = {
Chaos::create, {}, {}
};
bandit: refactor host read and write methods.
2023-02-01 15:21:49 +00:00
REGISTER_DEVICE(Bandit1, Bandit1_Descriptor);
REGISTER_DEVICE(PsxPci1, PsxPci1_Descriptor);
REGISTER_DEVICE(Chaos, Chaos_Descriptor);