dingusppc/zdocs/viacuda.md
2020-03-05 21:38:14 -07:00

4.5 KiB

Using a combination of a 6522 along with some integrated circuits, the VIA Cuda is a microcontroller that heavily controls system operations. It's largely similar to Egret (used in many 68k Macs), but removes some commands.

The usual offset for a VIA Cuda is IOBase (ex.: 0xF3000000 for Power Mac G3 Beige) + 0x16000. The registers are spaced out by 0x200 bytes on the Heathrow.

Usage

The VIA Cuda is emulated in all Power Macs through an interrupt controller. Early Power Macs also used the Parameter RAM.

Additionally, nodes are included for ADB peripherals, Parameter RAM, Real-Time Clocks, and Power Management.

It can be run either synchronously or asynchronously.

However, the CUDA is also slower than the CPU, thus causing a delay that the OS expects.

Registers

Within the emulated CUDA, these registers are spaced apart by 0x200 bytes. Apple themselves recommended avoiding the usage of Handshake Data A.

Register Name Abbreviation Offset
Data B ORB 0x0
Handshake Data A ORA(H) 0x1
Data Direction B DIRB 0x2
Data Direction A DIRA 0x3
Timer 1 Counter Low T1C 0x4
Timer 1 Counter High T1CH 0x5
Timer 1 Latch Low T1L 0x6
Timer 1 Latch High T1LH 0x7
Timer 2 Counter Low T2C 0x8
Timer 2 Counter High T2CH 0x9
Shift SR 0xA
Auxiliary Control ACR 0xB
Peripheral Control PCR 0xC
Interrupt Flag IFE 0xD
Interrupt Enable IER 0xE
Data A ORA 0xF

Data A

Register Bit Bit Mask
Drive Select 0x10
Disk Head Select 0x20

Auxiliary Control

Register Bit Bit Mask
Port A Latch 0x1
Port B Latch 0x2
Timer 2, control 0x20
Timer 1, continuous counting 0x40
Timer 1, drives PB7 0x80

Interrupt Enable

Register Bit Bit Mask
CA2 0x1
CA1 0x2
Shift Register 0x2
CB2 0x8
CB1 0x10
Timer 2 0x20
Timer 1 0x40
Set interrupt 0x80

Packet Types

Hex Packet Type
0x00 ADB
0x01 Pseudo
0x02 Error
0x03 Timer
0x04 Power
0x05 Mac II

Device Commands

Hex Device Command
0x00 Reset Bus
0x01 Flush ADB
0x08 Write ADB
0x0C Read ADB

Pseudo Commands

Hex Command Name
0x00 WARM_START
0x01 START_STOP_AUTO_POLL
0x02 GET_6805_ADDRESS
0x03 GET_REAL_TIME
0x07 GET_PRAM
0x08 SET_6805_ADDRESS
0x09 SET_REAL_TIME
0x0A POWER_DOWN
0x0B SET_POWER_UPTIME
0x0C SET_PRAM
0x0D MONO_STABLE_RESET
0x0E SEND_DFAC
0x10 BATTERY_SWAP_SENSE
0x11 RESTART_SYSTEM
0x12 SET_IPL_LEVEL
0x13 FILE_SERVER_FLAG
0x14 SET_AUTO_RATE
0x16 GET_AUTO_RATE
0x19 SET_DEVICE_LIST
0x1A GET_DEVICE_LIST
0x1B SET_ONE_SECOND_MODE
0x21 SET_POWER_MESSAGES
0x22 GET_SET_IIC
0x23 ENABLE_DISABLE_WAKEUP
0x24 TIMER_TICKLE
0X25 COMBINED_FORMAT_IIC
0x26 (UNDOCUMENTED!)