moa/README.md

Moa

Started September 26, 2021

Moa is an emulator/simulator for computers using various 68000 and Z80 CPUs and peripherals. The original idea was to emulate the computer I had built as part of the Computie project.

Currently it can simulate Computie (68000) and the TRS-80 Model I (Z80), and I'm working on supporting the Macintosh 512k and Sega Genesis.

For more detail, check out this post about how I started the project: Making a 68000 Emulator in Rust

Computie

For Computie, it can do everything the 68k-SMT board can do, including run the monitor program and load the Computie OS kernel and boot it from the CompactFlash card. To run it:

cargo run -p moa-console --bin moa-computie

It will open two PTYs: one for the serial terminal, and one for the SLIP connection. Once open, it will try to launch both pyserial-miniterm as a separate process and connect to the Computie PTY. It will also launch slattach with the associated setup commands to create the SLIP device on the host, and set up host routing. The exact commands in src/machines/computie.rs might need to be adjusted to work on different hosts.

TRS-80

For the TRS-80, it can run Level I or Level II Basic, but it doesn't yet support a cassette tape drive or floppy drive. I haven't tested it that thoroughly either, so any help with it would be welcome. I mostly made it to test the Z80 cpu implementation in a simpler computer before I used in the Genesis emulator. The frontend uses the minifb rust crate to open a window and render the characters to screen, as well as accept input from the keyboard.

cargo run -p moa-minifb --release --bin moa-trs-80

By default it will start Level I Basic. To use the other rom, add the option --rom binaries/trs80/level2.rom

The characters are being drawn pixel by pixel (6x8) using characters I drew using this handy website. They aren't a perfect match of the characters used by the TRS-80

Sega Genesis/MegaDrive

It can be run with:

cargo run -p moa-minifb --release --bin moa-genesis -- <ROM FILE>

The Genesis emulator is a work in progress. It can play a few games but some games won't run because the bank switching for the Z80 coprocessor is not working yet, and some games will hang waiting for the Z80 to respond. For the video processor, the window layer is not drawn and the layer priority is not handled. The horizontal scroll also doesn't work on a line-by-line basis so it tends to be quite jerky as you move, with the sprites and cells misaligned until you've moved one complete cell over (8x8 pixels).

On the Sonic 2 title screen, the colours for Tails are wonky, probably because there's some trickery going on to get more than 16 colours per line, but the emulator currently renders the whole frame at once instead of line by line, so changes that should be made while the screen is updating don't show up

The game play is mostly working but the bottom of the clouds should be a different colour, probably because highlight/shadow colours are not yet supported. The time in the upper left corner also doesn't seem to progress

I'm not yet sure why the clouds in the background are cut off suddenly. They change in a glitchy way when you move around

There are some graphics glitches in Earthworm Jim, but it's almost playable if it wasn't for the 'jump' button, which only makes him jump a few pixels

General Options

By default, the minifb frontend will scale the window by 2. This can be changed with the --scale [1,2,4] option.

The -d or --debugger option will make the emulator start the debugger before running. There is a simple built-in debugger for stepping through the rom instructions being emulated. The state of the CPU registers will be displayed after each instruction, breakpoints can be set, memory contents can be examined, and memory locations can be modified. This has helped a lot with tracking down errors in the emulator itself.