CLK/Components/9918/Implementation/9918Base.hpp

//
//  9918Base.hpp
//  Clock Signal
//
//  Created by Thomas Harte on 14/12/2017.
//  Copyright 2017 Thomas Harte. All rights reserved.
//

#ifndef TMS9918Base_hpp
#define TMS9918Base_hpp

#include "ClockConverter.hpp"

#include "../../../ClockReceiver/ClockReceiver.hpp"
#include "../../../Numeric/BitReverse.hpp"
#include "../../../Outputs/CRT/CRT.hpp"

#include "PersonalityTraits.hpp"

#include <array>
#include <cassert>
#include <cstdint>
#include <cstring>
#include <memory>
#include <vector>

namespace TI {
namespace TMS {

// The screen mode is a necessary predecessor to picking the line mode,
// which is the thing latched per line.
enum class ScreenMode {
	// Original TMS modes.
	Blank,
	Text,
	MultiColour,
	ColouredText,
	Graphics,

	// 8-bit Sega modes.
	SMSMode4,

	// New Yamaha V9938 modes.
	YamahaText80,
	YamahaGraphics3,
	YamahaGraphics4,
	YamahaGraphics5,
	YamahaGraphics6,
	YamahaGraphics7,

	// Rebranded Yamaha V9938 modes.
	YamahaGraphics1 = ColouredText,
	YamahaGraphics2 = Graphics,
};

enum class LineMode {
	Text,
	Character,
	Refresh,
	SMS,
	Yamaha,
};

enum class MemoryAccess {
	Read, Write, None
};

// Temporary buffers collect a representation of each line prior to pixel serialisation.
//
// TODO: either template on personality, to avoid having to be the union of all potential footprints,
// or just stop keeping so many of these in the 9918.
struct LineBuffer {
	LineBuffer() {}

	// The line mode describes the proper timing diagram for this line.
	LineMode line_mode = LineMode::Text;

	// Holds the horizontal scroll position to apply to this line;
	// of those VDPs currently implemented, affects the Master System only.
	uint8_t latched_horizontal_scroll = 0;

	// The names array holds pattern names, as an offset into memory, and
	// potentially flags also.
	union {
		// The TMS and Sega VDPs are close enough to always tile-based;
		// this struct captures maximal potential detail there.
		struct {
			struct {
				size_t offset = 0;
				uint8_t flags = 0;
			} names[40];

			// The patterns array holds tile patterns, corresponding 1:1 with names.
			// Four bytes per pattern is the maximum required by any
			// currently-implemented VDP.
			uint8_t patterns[40][4];
		};

		// The Yamaha VDP also has a variety of bitmap modes, the widest of which is
		// 512px @ 4bpp.
		uint8_t bitmap[256];
	};

	/*
		Horizontal layout (on a 342-cycle clock):

			15 cycles right border
			58 cycles blanking & sync
			13 cycles left border

			... i.e. to cycle 86, then:

			border up to first_pixel_output_column;
			pixels up to next_border_column;
			border up to the end.

		e.g. standard 256-pixel modes will want to set
		first_pixel_output_column = 86, next_border_column = 342.
	*/
	int first_pixel_output_column = 94;
	int next_border_column = 334;
	size_t pixel_count = 256;

	// An active sprite is one that has been selected for composition onto
	// this line.
	struct ActiveSprite {
		int index = 0;		// The original in-table index of this sprite.
		int row = 0;		// The row of the sprite that should be drawn.
		int x = 0;			// The sprite's x position on screen.

		uint8_t image[4];		// Up to four bytes of image information.
		int shift_position = 0;	// An offset representing how much of the image information has already been drawn.
	} active_sprites[8];

	int active_sprite_slot = 0;		// A pointer to the slot into which a new active sprite will be deposited, if required.
	bool sprites_stopped = false;	// A special TMS feature is that a sentinel value can be used to prevent any further sprites
									// being evaluated for display. This flag determines whether the sentinel has yet been reached.

	void reset_sprite_collection();
};

struct LineBufferPointer {
	int row, column;
};

constexpr uint8_t StatusInterrupt = 0x80;
constexpr uint8_t StatusSpriteOverflow = 0x40;

constexpr int StatusSpriteCollisionShift = 5;
constexpr uint8_t StatusSpriteCollision = 0x20;

/// A container for personality-specific storage; see specific instances below.
template <Personality personality, typename Enable = void> struct Storage {
};

template <> struct Storage<Personality::TMS9918A> {
	void begin_line(ScreenMode, bool, bool) {}
};

// Yamaha-specific storage.
template <Personality personality> struct Storage<personality, std::enable_if_t<is_yamaha_vdp(personality)>> {
	int selected_status_ = 0;

	int indirect_register_ = 0;
	bool increment_indirect_register_ = false;

	uint32_t palette_[16]{};
	uint8_t new_colour_ = 0;
	uint8_t palette_entry_ = 0;

	uint8_t mode_ = 0;

	/// Describes an _observable_ memory access event. i.e. anything that it is safe
	/// (and convenient) to treat as atomic in between external slots.
	struct Event {
		/// Offset of the _beginning_ of the event. Not completely arbitrarily: this is when
		/// external data must be ready by in order to take part in those slots.
		int offset = 1368;
		enum class Type {
			External,
			DataBlock,
		} type = Type::External;

		constexpr Event(int offset, Type type) noexcept :
			offset(grauw_to_internal(offset)),
			type(type) {}

		constexpr Event(int offset) noexcept :
			offset(grauw_to_internal(offset)) {}

		constexpr Event() noexcept {}
	};
	const Event *next_event_ = nullptr;
	void begin_line([[maybe_unused]] ScreenMode mode, bool is_refresh, [[maybe_unused]] bool sprites_enabled) {
		// TODO: remove this check. It's temporary, while the Yamaha is still using the TMS fetchers.
		if(mode < ScreenMode::YamahaText80) {
			return;
		}

		assert(next_event_ == nullptr || next_event_->offset == 1368);

		if(is_refresh) {
			next_event_ = refresh_events;
			return;
		}

		// TODO: obey sprites_enabled flag, at least.
		next_event_ = no_sprites_events;
	}

	Storage() noexcept {
		// Perform sanity checks on the event lists.
#ifndef NDEBUG
		const Event *lists[] = { no_sprites_events, refresh_events, nullptr };
		const Event **list = lists;
		while(*list) {
			const Event *cursor = *list;
			++list;

			while(cursor[1].offset != 1368) {
				assert(cursor[1].offset > cursor[0].offset);
				++cursor;
			}
		}
#endif
	}

	private:
		// This emulator treats position 0 as being immediately after the standard pixel area.
		// i.e. offset 1282 on Grauw's http://map.grauw.nl/articles/vdp-vram-timing/vdp-timing.png
		constexpr static int grauw_to_internal(int offset) {
			return (offset + 1368 - 1282) % 1368;
		}

		static constexpr Event refresh_events[] = {
			Event(1284),	Event(1292),	Event(1300),	Event(1308),	Event(1316),	Event(1324),
			Event(1334),	Event(1344),	Event(1352),	Event(1360),	Event(0),		Event(8),
			Event(16),		Event(24),		Event(32),		Event(40),		Event(48),		Event(56),
			Event(64),		Event(72),		Event(80),		Event(88),		Event(96),		Event(104),
			Event(112),		Event(120),

			Event(164),		Event(172),		Event(180),		Event(188),		Event(196),		Event(204),
			Event(212),		Event(220),		Event(228),		Event(236),		Event(244),		Event(252),
			Event(260),		Event(268),		Event(276),		/* Refresh. */	Event(292),		Event(300),
			Event(308),		Event(316),		Event(324),		Event(332),		Event(340),		Event(348),
			Event(356),		Event(364),		Event(372),		Event(380),		Event(388),		Event(396),
			Event(404),		/* Refresh. */	Event(420),		Event(428),		Event(436),		Event(444),
			Event(452),		Event(460),		Event(468),		Event(476),		Event(484),		Event(492),
			Event(500),		Event(508),		Event(516),		Event(524),		Event(532),		/* Refresh. */
			Event(548),		Event(556),		Event(564),		Event(570),		Event(580),		Event(588),
			Event(596),		Event(604),		Event(612),		Event(620),		Event(628),		Event(636),
			Event(644),		Event(652),		Event(660),		/* Refresh. */	Event(676),		Event(684),
			Event(692),		Event(700),		Event(708),		Event(716),		Event(724),		Event(732),
			Event(740),		Event(748),		Event(756),		Event(764),		Event(772),		Event(780),
			Event(788),		/* Refresh. */	Event(804),		Event(812),		Event(820),		Event(828),
			Event(836),		Event(844),		Event(852),		Event(860),		Event(868),		Event(876),
			Event(884),		Event(892),		Event(900),		Event(908),		Event(916),		/* Refresh. */
			Event(932),		Event(940),		Event(948),		Event(956),		Event(964),		Event(972),
			Event(980),		Event(988),		Event(996),		Event(1004),	Event(1012),	Event(1020),
			Event(1028),	Event(1036),	Event(1044),	/* Refresh. */	Event(1060),	Event(1068),
			Event(1076),	Event(1084),	Event(1092),	Event(1100),	Event(1108),	Event(1116),
			Event(1124),	Event(1132),	Event(1140),	Event(1148),	Event(1156),	Event(1164),
			Event(1172),	/* Refresh. */	Event(1188),	Event(1196),	Event(1204),	Event(1212),
			Event(1220),	Event(1228),

			Event(1268),	Event(1276),

			Event()
		};

		static constexpr Event no_sprites_events[] = {
			Event(1282, Event::Type::External),
			Event(1290, Event::Type::External),
			Event(1298, Event::Type::External),
			Event(1306, Event::Type::External),
			Event(1314, Event::Type::External),
			Event(1322, Event::Type::External),
			Event(1332, Event::Type::External),
			Event(1342, Event::Type::External),
			Event(1350, Event::Type::External),
			Event(1358, Event::Type::External),
			Event(1366, Event::Type::External),

			Event(6, Event::Type::External),
			Event(14, Event::Type::External),
			Event(22, Event::Type::External),
			Event(30, Event::Type::External),
			Event(38, Event::Type::External),
			Event(46, Event::Type::External),
			Event(54, Event::Type::External),
			Event(62, Event::Type::External),
			Event(70, Event::Type::External),
			Event(78, Event::Type::External),
			Event(86, Event::Type::External),
			Event(94, Event::Type::External),
			Event(102, Event::Type::External),
			Event(110, Event::Type::External),
			Event(118, Event::Type::External),

			Event(162, Event::Type::External),
			Event(170, Event::Type::External),
			Event(182, Event::Type::External),
			Event(188, Event::Type::External),
			// Omitted: dummy data block. Is not observable.
			Event(214, Event::Type::External),
			Event(220, Event::Type::External),

			Event(226, Event::Type::DataBlock),	Event(246, Event::Type::External),	Event(252, Event::Type::External),
			Event(258, Event::Type::DataBlock),	Event(278, Event::Type::External),	// Omitted: refresh.
			Event(290, Event::Type::DataBlock),	Event(310, Event::Type::External),	Event(316, Event::Type::External),
			Event(322, Event::Type::DataBlock),	Event(342, Event::Type::External),	Event(348, Event::Type::External),
			Event(354, Event::Type::DataBlock),	Event(374, Event::Type::External),	Event(380, Event::Type::External),
			Event(386, Event::Type::DataBlock),	Event(406, Event::Type::External),	// Omitted: refresh.
			Event(418, Event::Type::DataBlock),	Event(438, Event::Type::External),	Event(444, Event::Type::External),
			Event(450, Event::Type::DataBlock),	Event(470, Event::Type::External),	Event(476, Event::Type::External),

			Event(482, Event::Type::DataBlock),	Event(502, Event::Type::External),	Event(508, Event::Type::External),
			Event(514, Event::Type::DataBlock),	Event(534, Event::Type::External),	// Omitted: refresh.
			Event(546, Event::Type::DataBlock),	Event(566, Event::Type::External),	Event(572, Event::Type::External),
			Event(578, Event::Type::DataBlock),	Event(598, Event::Type::External),	Event(604, Event::Type::External),
			Event(610, Event::Type::DataBlock),	Event(630, Event::Type::External),	Event(636, Event::Type::External),
			Event(642, Event::Type::DataBlock),	Event(662, Event::Type::External),	// Omitted: refresh.
			Event(674, Event::Type::DataBlock),	Event(694, Event::Type::External),	Event(700, Event::Type::External),
			Event(706, Event::Type::DataBlock),	Event(726, Event::Type::External),	Event(732, Event::Type::External),

			Event(738, Event::Type::DataBlock),	Event(758, Event::Type::External),	Event(764, Event::Type::External),
			Event(770, Event::Type::DataBlock),	Event(790, Event::Type::External),	// Omitted: refresh.
			Event(802, Event::Type::DataBlock),	Event(822, Event::Type::External),	Event(828, Event::Type::External),
			Event(834, Event::Type::DataBlock),	Event(854, Event::Type::External),	Event(860, Event::Type::External),
			Event(866, Event::Type::DataBlock),	Event(886, Event::Type::External),	Event(892, Event::Type::External),
			Event(898, Event::Type::DataBlock),	Event(918, Event::Type::External),	// Omitted: refresh.
			Event(930, Event::Type::DataBlock),	Event(950, Event::Type::External),	Event(956, Event::Type::External),
			Event(962, Event::Type::DataBlock),	Event(982, Event::Type::External),	Event(988, Event::Type::External),

			Event(994, Event::Type::DataBlock),	Event(1014, Event::Type::External),	Event(1020, Event::Type::External),
			Event(1026, Event::Type::DataBlock),	Event(1046, Event::Type::External),	// Omitted: refresh.
			Event(1058, Event::Type::DataBlock),	Event(1078, Event::Type::External),	Event(1084, Event::Type::External),
			Event(1090, Event::Type::DataBlock),	Event(1110, Event::Type::External),	Event(1116, Event::Type::External),
			Event(1122, Event::Type::DataBlock),	Event(1142, Event::Type::External),	Event(1148, Event::Type::External),
			Event(1154, Event::Type::DataBlock),	Event(1174, Event::Type::External),	// Omitted: refresh.
			Event(1186, Event::Type::DataBlock),	Event(1206, Event::Type::External),	Event(1212, Event::Type::External),
			Event(1218, Event::Type::DataBlock),

			Event(1266, Event::Type::External),
			Event(1274, Event::Type::External),

			Event()
		};
};

// Master System-specific storage.
template <Personality personality> struct Storage<personality, std::enable_if_t<is_sega_vdp(personality)>> {
	// The SMS VDP has a programmer-set colour palette, with a dedicated patch of RAM. But the RAM is only exactly
	// fast enough for the pixel clock. So when the programmer writes to it, that causes a one-pixel glitch; there
	// isn't the bandwidth for the read both write to occur simultaneously. The following buffer therefore keeps
	// track of pending collisions, for visual reproduction.
	struct CRAMDot {
		LineBufferPointer location;
		uint32_t value;
	};
	std::vector<CRAMDot> upcoming_cram_dots_;

	// The Master System's additional colour RAM.
	uint32_t colour_ram_[32];
	bool cram_is_selected_ = false;

	// Fields below affect only the Master System output mode.

	// Programmer-set flags.
	bool vertical_scroll_lock_ = false;
	bool horizontal_scroll_lock_ = false;
	bool hide_left_column_ = false;
	bool shift_sprites_8px_left_ = false;
	bool mode4_enable_ = false;
	uint8_t horizontal_scroll_ = 0;
	uint8_t vertical_scroll_ = 0;

	// Holds the vertical scroll position for this frame; this is latched
	// once and cannot dynamically be changed until the next frame.
	uint8_t latched_vertical_scroll_ = 0;

	// Various resource addresses with VDP-version-specific modifications
	// built int.
	size_t pattern_name_address_;
	size_t sprite_attribute_table_address_;
	size_t sprite_generator_table_address_;

	void begin_line(ScreenMode, bool, bool) {}
};

template <Personality personality> struct Base: public Storage<personality> {
	Base();

	static constexpr int output_lag = 11;	// i.e. pixel output will occur 11 cycles
											// after corresponding data read.

	static constexpr uint32_t palette_pack(uint8_t r, uint8_t g, uint8_t b) {
		#if TARGET_RT_BIG_ENDIAN
			return uint32_t((r << 24) | (g << 16) | (b << 8));
		#else
			return uint32_t((b << 16) | (g << 8) | r);
		#endif
	}

	// The default TMS palette.
	static constexpr std::array<uint32_t, 16> palette {
		palette_pack(0, 0, 0),
		palette_pack(0, 0, 0),
		palette_pack(33, 200, 66),
		palette_pack(94, 220, 120),

		palette_pack(84, 85, 237),
		palette_pack(125, 118, 252),
		palette_pack(212, 82, 77),
		palette_pack(66, 235, 245),

		palette_pack(252, 85, 84),
		palette_pack(255, 121, 120),
		palette_pack(212, 193, 84),
		palette_pack(230, 206, 128),

		palette_pack(33, 176, 59),
		palette_pack(201, 91, 186),
		palette_pack(204, 204, 204),
		palette_pack(255, 255, 255)
	};

	Outputs::CRT::CRT crt_;
	TVStandard tv_standard_ = TVStandard::NTSC;

	// Personality-specific metrics and converters.
	ClockConverter<personality> clock_converter_;

	// This VDP's DRAM.
	std::array<uint8_t, memory_size(personality)> ram_;

	// State of the DRAM/CRAM-access mechanism.
	size_t ram_pointer_ = 0;
	uint8_t read_ahead_buffer_ = 0;
	MemoryAccess queued_access_ = MemoryAccess::None;
	int cycles_until_access_ = 0;
	int minimum_access_column_ = 0;

	// The main status register.
	uint8_t status_ = 0;

	// Current state of programmer input.
	bool write_phase_ = false;	// Determines whether the VDP is expecting the low or high byte of a write.
	uint8_t low_write_ = 0;		// Buffers the low byte of a write.

	// Various programmable flags.
	bool mode1_enable_ = false;
	bool mode2_enable_ = false;
	bool mode3_enable_ = false;
	bool blank_display_ = false;
	bool sprites_16x16_ = false;
	bool sprites_magnified_ = false;
	bool generate_interrupts_ = false;
	int sprite_height_ = 8;

	// Programmer-specified addresses.
	size_t pattern_name_address_ = 0;				// i.e. address of the tile map.
	size_t colour_table_address_ = 0;				// address of the colour map (if applicable).
	size_t pattern_generator_table_address_ = 0;	// address of the tile contents.
	size_t sprite_attribute_table_address_ = 0;		// address of the sprite list.
	size_t sprite_generator_table_address_ = 0;		// address of the sprite contents.

	// Default colours.
	uint8_t text_colour_ = 0;
	uint8_t background_colour_ = 0;

	// Internal mechanisms for position tracking.
	int latched_column_ = 0;

	// A struct to contain timing information that is a function of the current mode.
	struct {
		/*
			Vertical layout:

			Lines 0 to [pixel_lines]: standard data fetch and drawing will occur.
			... to [first_vsync_line]: refresh fetches will occur and border will be output.
			.. to [2.5 or 3 lines later]: vertical sync is output.
			... to [total lines - 1]: refresh fetches will occur and border will be output.
			... for one line: standard data fetch will occur, without drawing.
		*/
		int total_lines = 262;
		int pixel_lines = 192;
		int first_vsync_line = 227;

		// Maximum number of sprite slots to populate;
		// if sprites beyond this number should be visible
		// then the appropriate status information will be set.
		int maximum_visible_sprites = 4;

		// Set the position, in cycles, of the two interrupts,
		// within a line.
		struct {
			int column = 4;
			int row = 193;
		} end_of_frame_interrupt_position;
		int line_interrupt_position = -1;

		// Enables or disabled the recognition of the sprite
		// list terminator, and sets the terminator value.
		bool allow_sprite_terminator = true;
		uint8_t sprite_terminator = 0xd0;
	} mode_timing_;

	uint8_t line_interrupt_target_ = 0xff;
	uint8_t line_interrupt_counter_ = 0;
	bool enable_line_interrupts_ = false;
	bool line_interrupt_pending_ = false;

	ScreenMode screen_mode_;
	LineBuffer line_buffers_[313];
	void posit_sprite(LineBuffer &buffer, int sprite_number, int sprite_y, int screen_row);

	// There is a delay between reading into the line buffer and outputting from there to the screen. That delay
	// is observeable because reading time affects availability of memory accesses and therefore time in which
	// to update sprites and tiles, but writing time affects when the palette is used and when the collision flag
	// may end up being set. So the two processes are slightly decoupled. The end of reading one line may overlap
	// with the beginning of writing the next, hence the two separate line buffers.
	LineBufferPointer output_pointer_, fetch_pointer_;

	int fetch_line() const;
	bool is_vertical_blank() const;
	bool is_horizontal_blank() const;

	int masked_address(int address) const;
	void write_vram(uint8_t);
	void write_register(uint8_t);
	void write_palette(uint8_t);
	void write_register_indirect(uint8_t);
	uint8_t read_vram();
	uint8_t read_register();
	uint8_t read_palette();
	uint8_t read_register_indirect();

	void commit_register(int reg, uint8_t value);

	ScreenMode current_screen_mode() const {
		if(blank_display_) {
			return ScreenMode::Blank;
		}

		if constexpr (is_sega_vdp(personality)) {
			if(Storage<personality>::mode4_enable_) {
				return ScreenMode::SMSMode4;
			}
		}

		if constexpr (is_yamaha_vdp(personality)) {
			switch(Storage<personality>::mode_) {
				case 0b00001:	return ScreenMode::Text;
				case 0b01001:	return ScreenMode::YamahaText80;
				case 0b00010:	return ScreenMode::MultiColour;
				case 0b00000:	return ScreenMode::YamahaGraphics1;
				case 0b00100:	return ScreenMode::YamahaGraphics2;
				case 0b01000:	return ScreenMode::YamahaGraphics3;
				case 0b01100:	return ScreenMode::YamahaGraphics4;
				case 0b10000:	return ScreenMode::YamahaGraphics5;
				case 0b10100:	return ScreenMode::YamahaGraphics6;
				case 0b11100:	return ScreenMode::YamahaGraphics7;
			}
		}

		if(!mode1_enable_ && !mode2_enable_ && !mode3_enable_) {
			return ScreenMode::ColouredText;
		}

		if(mode1_enable_ && !mode2_enable_ && !mode3_enable_) {
			return ScreenMode::Text;
		}

		if(!mode1_enable_ && mode2_enable_ && !mode3_enable_) {
			return ScreenMode::Graphics;
		}

		if(!mode1_enable_ && !mode2_enable_ && mode3_enable_) {
			return ScreenMode::MultiColour;
		}

		// TODO: undocumented TMS modes.
		return ScreenMode::Blank;
	}

	void do_external_slot(int access_column) {
		// Don't do anything if the required time for the access to become executable
		// has yet to pass.
		if(queued_access_ == MemoryAccess::None || access_column < minimum_access_column_) {
			return;
		}

		size_t address = ram_pointer_;
		++ram_pointer_;

		if constexpr (is_yamaha_vdp(personality)) {
			const ScreenMode mode = current_screen_mode();
			if(mode == ScreenMode::YamahaGraphics6 || mode == ScreenMode::YamahaGraphics7) {
				// Rotate address one to the right as the hardware accesses
				// the underlying banks of memory alternately but presents
				// them as if linear.
				address = (address >> 1) | (address << 16);
			}
		}

		switch(queued_access_) {
			default: break;

			case MemoryAccess::Write:
				if constexpr (is_sega_vdp(personality)) {
					if(Storage<personality>::cram_is_selected_) {
						// Adjust the palette. In a Master System blue has a slightly different
						// scale; cf. https://www.retrorgb.com/sega-master-system-non-linear-blue-channel-findings.html
						constexpr uint8_t rg_scale[] = {0, 85, 170, 255};
						constexpr uint8_t b_scale[] = {0, 104, 170, 255};
						Storage<personality>::colour_ram_[address & 0x1f] = palette_pack(
							rg_scale[(read_ahead_buffer_ >> 0) & 3],
							rg_scale[(read_ahead_buffer_ >> 2) & 3],
							b_scale[(read_ahead_buffer_ >> 4) & 3]
						);

						// Schedule a CRAM dot; this is scheduled for wherever it should appear
						// on screen. So it's wherever the output stream would be now. Which
						// is output_lag cycles ago from the point of view of the input stream.
						auto &dot = Storage<personality>::upcoming_cram_dots_.emplace_back();
						dot.location.column = fetch_pointer_.column - output_lag;
						dot.location.row = fetch_pointer_.row;

						// Handle before this row conditionally; then handle after (or, more realistically,
						// exactly at the end of) naturally.
						if(dot.location.column < 0) {
							--dot.location.row;
							dot.location.column += 342;
						}
						dot.location.row += dot.location.column / 342;
						dot.location.column %= 342;

						dot.value = Storage<personality>::colour_ram_[address & 0x1f];
						break;
					}
				}
				ram_[address & memory_mask(personality)] = read_ahead_buffer_;
			break;
			case MemoryAccess::Read:
				read_ahead_buffer_ = ram_[address & memory_mask(personality)];
			break;
		}
		queued_access_ = MemoryAccess::None;
	}

	// Various fetchers.
	template<bool use_end> void fetch_tms_refresh(int start, int end);
	template<bool use_end> void fetch_tms_text(int start, int end);
	template<bool use_end> void fetch_tms_character(int start, int end);

	template<bool use_end> void fetch_yamaha(int start, int end);

	template<bool use_end> void fetch_sms(int start, int end);

	// A helper function to output the current border colour for
	// the number of cycles supplied.
	void output_border(int cycles, uint32_t cram_dot);

	// Output serialisation state.
	uint32_t *pixel_target_ = nullptr, *pixel_origin_ = nullptr;
	bool asked_for_write_area_ = false;

	// Output serialisers.
	void draw_tms_character(int start, int end);
	void draw_tms_text(int start, int end);
	void draw_sms(int start, int end, uint32_t cram_dot);
};

#include "Fetch.hpp"
#include "Draw.hpp"

}
}

#endif /* TMS9918Base_hpp */