113 Commits

Author	SHA1	Message	Date
Thomas Harte	1d3ae31755	Abstracted the concept of an Acorn shifter away from being a PLLParser. The Acorn tape parser now skips using that class and uses the shifter. The actual Electron also uses the shifter. So the two are completely aligned. Net result: the Electron should successfully load exactly when static analysis was successful.	2017-07-16 19:24:01 -04:00
Thomas Harte	e5188a60dc	Settled on the new average-of-length approach to a PLL window sizing, eliminating the old errors-of-phase approach. Since it anchors automatically to the original target clocks per bit, killed the explicit mention of a tolerance.	2017-07-16 19:03:50 -04:00
Thomas Harte	e71d13c090	With the new PLL implementation, switching to a deeper window size returns the Acorn tape parser to: working.	2017-07-16 17:12:12 -04:00
Thomas Harte	c8575fe6e0	Mild clean ups, and a tweak to permitted top and bottom phase.	2017-07-16 13:39:08 -04:00
Thomas Harte	253f9603ed	Split the normal tape parser class into two in order to add a new option: a PLL-driven tape parser. Decided to see what happens if I attempt to use that to parse CSW Acorn data.	2017-07-15 19:07:35 -04:00
Thomas Harte	b743566339	Corrected under-request of data: was erroneously supplying the size of input as the expected size of output.	2017-07-15 15:19:03 -04:00
Thomas Harte	648618d280	Tweaked bit timing decision.	2017-07-13 21:26:05 -04:00
Thomas Harte	ae1a130843	Fixed: length of 0 is a special case.	2017-07-13 20:57:27 -04:00
Thomas Harte	f09fe30af5	Attempted a full implementation of CSW. All in memory for now.	2017-07-12 21:23:59 -04:00
Thomas Harte	33eadb5549	Started taking further steps towards CSW support; reading the ZLib documentation is next.	2017-07-11 22:41:10 -04:00
Thomas Harte	368bff1a82	Added a shell class that will one day be able to parse CSW files, plus the logic and metadata to instantiate it when a CSW presents itself.	2017-07-10 21:43:58 -04:00
Thomas Harte	bcb7c27cc4	Given that I'm not racing this any more, turned the intended 1 second back into 1 second.	2017-07-08 19:21:33 -04:00
Thomas Harte	2f42874fd3	Another fix to deal with real-time fighting: allow 8 and 18 pulses to be recognised as 1s and 0s. That's because the hand-off from ROM routines to parsing may occur very shortly before the first pulse of a valid sequence, making it look like there's a ghost. A cleaner solution needs to be found, probably revolving around allowing parsers to be attached to tapes and therefore to run constantly.	2017-07-06 22:33:03 -04:00
Thomas Harte	84d0e9b4cd	Accept a pulse that begins exactly on seek_time as being found while seeking.	2017-07-06 22:31:45 -04:00
Thomas Harte	a53011f778	Extended intro and outro length because right now I'm racing this myself. Can return to normal once tape motor control is implemented.	2017-07-06 22:31:12 -04:00
Thomas Harte	919fc48cc5	Fixed dumb out-of-bounds access error.	2017-06-22 22:28:50 -04:00
Thomas Harte	52d9ddf9e5	Gave the binary tape player a more logical assignment of wave level to output level. Which miraculously appears to have been the issue with the ZX80/81 tape loading — the inconsistency of silences seems to have been the issue.	2017-06-21 22:13:24 -04:00
Thomas Harte	22de481557	Made an attempt to get .p/.80 checked and as far as the emulated machine.	2017-06-12 19:41:59 -04:00
Thomas Harte	77aa3c187e	Rebranded ZX80O as ZX80O81P, with an eye to making it accept ZX81 .p files. Adjusted the initial selection part of the static analyser appropriately.	2017-06-11 21:38:32 -04:00
Thomas Harte	ee0283c985	Modified to use an in-memory buffer for file contents.	2017-06-11 21:35:09 -04:00
Thomas Harte	2c6414ce11	Adjusted to allow inspect_waves to swallow a gap before a bit if necessary, increasing the opportunities for its call.	2017-06-11 18:31:09 -04:00
Thomas Harte	e5aea632ee	Updated curly bracket placement.	2017-06-11 17:29:22 -04:00
Thomas Harte	256ba4028b	Rejigged to eliminate semi-duplication of the is-a-file test.	2017-06-08 21:52:13 -04:00
Thomas Harte	b07af2660d	Adjusted to make sure that the very end of a tape is properly measured.	2017-06-08 21:33:35 -04:00
Thomas Harte	bc0d70b2f7	Added: a shout-out when the tape has been exhausted.	2017-06-08 21:32:27 -04:00
Thomas Harte	c6e48dfd56	Given that a final gap is semantically part of describing tape contents, ensured one formally appears before declaring that the tape has ended.	2017-06-08 21:31:54 -04:00
Thomas Harte	ee4c8b5ad2	Ensured final byte plays out.	2017-06-08 19:51:49 -04:00
Thomas Harte	7e10c7f9d8	Relocated the ZX80/81 concept of a 'file' out from Tape into Data, given that it's an exact duplicate of memory.	2017-06-08 19:09:51 -04:00
Thomas Harte	c47128f433	Widened tolerances and ensured zero bits aren't prematurely discarded.	2017-06-07 17:50:03 -04:00
Thomas Harte	8aab9acc10	Eliminated use of the zero level; now definitively returns a low/high input.	2017-06-07 17:39:29 -04:00
Thomas Harte	dbd2944c13	Took an initial run at the ZX80/81 parser.	2017-06-07 17:27:05 -04:00
Thomas Harte	4603fa6f24	Extended explicitly to support a token of lookahead, which is pretty much what was on offer anyway. Also corrected instance variable names, as per better adoption of C++ norms.	2017-06-07 17:21:57 -04:00
Thomas Harte	60300851ea	Started sketching out a tape parser for ZX80 and '81 files. I think this'll help me to verify whether the .O input is working.	2017-06-07 10:12:13 -04:00
Thomas Harte	58312ea2b7	Updated to new standardisation on curly bracket placement.	2017-06-07 10:05:43 -04:00
Thomas Harte	cb534d8b85	Corrected comment.	2017-06-07 10:05:16 -04:00
Thomas Harte	4677cebf40	Rejigged to correct: spaces go after bits, not after bytes.	2017-06-06 18:29:15 -04:00
Thomas Harte	7399f3d798	Caveman debugging in place, it looks like this file is returning nonsense.	2017-06-06 18:18:55 -04:00
Thomas Harte	faeecf7665	Made sure that there's nothing but silence at the end of the tape, even if the .O file is too long.	2017-06-06 18:16:47 -04:00
Thomas Harte	8c1769f157	Made a quick attempt at serialising from ZX80 .O to waves.	2017-06-04 16:59:26 -04:00
Thomas Harte	655809517c	Ensured that there is a subclass of file that is entrusted to load .O/.80 files, and that the code routes such files to it, noting that it should consider whether a ZX80 is required.	2017-06-04 16:37:03 -04:00
Thomas Harte	2807e3134f	Implemented speedy header finding. So that's half of it.	2017-05-07 20:32:48 -04:00
Thomas Harte	3f7f2c6117	'Tape' has joined the new underscore orthodoxy.	2016-12-03 12:05:19 -05:00
Thomas Harte	8499783b14	Dragged multibyte primitives and signature checks up to the base class. Implemented support for Oric MFM-style .DSK, at the file format level.	2016-11-21 20:47:16 +08:00
Thomas Harte	31c2548804	Created a base class for the boilerplate fopen stuff, switched as many classes as possible to its use, switched to postfix underscores and non-camelCase names.	2016-11-21 20:14:09 +08:00
Thomas Harte	97811fe590	Made minor fix to ensure that a header that appears to extend beyond the end of an Oric .TAP doesn't create an ostensibly endless tape.	2016-11-15 12:02:03 +08:00
Thomas Harte	fce48b9b8c	I am instructed that the Oric actually catches only positive transitions, and compares the distance between those to a threshold. So here's an altered version of the tape parser that does that.	2016-11-09 06:37:10 -05:00
Thomas Harte	c257e7f58d	Implemented better sync-to-zero and discovered a header counting bug plus, probably, a misleading representation of gaps in the Oric TAP decoder.	2016-11-07 20:17:06 -05:00
Thomas Harte	80702616ea	Had a quick go at using the Oric parser for static analysis. Found out that synchronisation is lost. Need to investigate.	2016-11-06 22:56:38 -05:00
Thomas Harte	7205c3f82b	Made an attempt to build in Oric slow/fast detection.	2016-11-06 21:31:10 -05:00
Thomas Harte	d1ef2f7c63	Made an attempt to consolidate what I learnt of Oric encoding while building this hastily and untidily directly into the Oric implementation. ... (while adding support for the slow tape encoding mode)	2016-11-06 19:22:09 -05:00