Thomas Harte
4266264449
Switches to the more idiomatic .empty().
2019-10-27 21:31:31 -04:00
Thomas Harte
3794d94b68
Adds a sanity check on alignment.
2019-10-27 14:09:02 -04:00
Thomas Harte
684644420a
Increases scan buffer availability.
2019-10-20 17:22:41 -04:00
Thomas Harte
9c7aa5f3fc
Attempts also to spot data writes without allocations.
2019-10-19 18:26:56 -04:00
Thomas Harte
418cd07e17
Adds a check against overrunning data.
2019-10-19 18:17:44 -04:00
Thomas Harte
19198ea665
Improves const
usage.
2019-07-16 22:13:47 -04:00
Thomas Harte
60cedca97b
Adds cmath
in support of ceilf
.
2019-07-08 18:14:03 -04:00
Thomas Harte
f6f9024631
Corrects Macintosh aspect ratio (and framing).
2019-06-13 18:41:38 -04:00
Thomas Harte
66540ff86f
Permits end_data only after a begin_data.
2019-06-03 21:56:53 -04:00
Thomas Harte
b860ba2ee3
Disallows smaller buffer use for 'sharp' displays and tightens sampling window.
2019-06-03 15:58:14 -04:00
Thomas Harte
d25ab35d58
Finally gets setw
usage correct.
2019-04-15 12:41:56 -04:00
Thomas Harte
6f7dd10d95
Reduces draw/update contention.
...
This won't yet have any effect on either port owing to the way they handle contexts, but here it is.
2019-03-07 19:28:32 -05:00
Thomas Harte
24fb95291a
Reverts to support a full RGBA colour buffer.
2019-03-07 19:22:40 -05:00
Thomas Harte
84422676cb
Switches to more coherent logic about buffer sizing.
2019-03-06 19:19:30 -05:00
Thomas Harte
7441e3f4c5
Corrects aspect ratio when changing accumulation texture size.
2019-03-05 22:10:32 -05:00
Thomas Harte
f18132d674
Makes effort to round out draft 1 of Outputs::Display::Metrics.
2019-03-05 22:01:58 -05:00
Thomas Harte
5660007221
Experimentally introduces adaptive quality intermediate buffers.
2019-03-05 21:41:20 -05:00
Thomas Harte
86a6b04d4a
Begins attempts to keep track of display metrics.
...
i.e. a system that can both make smart decisions about when to use a lower resolution, and hopefully allow some sort of flywheel-esque horizontal retrace synchronisation. And possibly some raster beam chasing?
2019-03-04 21:54:50 -05:00
Thomas Harte
641e349f33
Switches to an 8bpp stencil, for Nvidia compatibility.
2019-03-03 20:38:24 -05:00
Thomas Harte
ccdeb3fbc8
Ensures draw is a no-op prior to pipeline setup.
2019-03-03 15:04:14 -05:00
Thomas Harte
bee0d09877
Splits display update and draw functions.
...
On the Mac, draw is now called without an update for resizing events, and
anything else requested by AppKit. In all other cases — including from
the SDL version — both are called as if they were still a single function.
2019-03-02 19:33:28 -05:00
Thomas Harte
d97348dd38
Eliminates dangling uses of printf
.
2019-03-02 18:07:05 -05:00
Thomas Harte
d122535a65
Unifies the OpenGL screenshot code and corrects it for arbitrary alignment.
2019-02-27 21:05:02 -05:00
Thomas Harte
db078c7363
Minor tweak: don't start counting phase from zero.
...
This should ensure no first pixel issues resulting from clamping.
2019-02-27 18:51:51 -05:00
Thomas Harte
6b4f6971de
Disables upper limit on frame buffer size.
...
Filtering is sufficiently imperfect as to make this justifiable only when performance requires it. So I need a test for that. Marked as TODO.
2019-02-26 22:39:07 -05:00
Thomas Harte
79707a3c66
Improves filtering slightly, and ensures coefficients are always set when needed.
2019-02-26 22:35:55 -05:00
Thomas Harte
694783efe9
Brings S-Video inside the group that filters luminance.
...
Thereby revealing some sort of error in offset selection.
2019-02-26 22:27:40 -05:00
Thomas Harte
68c5474e36
Reintroduces basic filtering for RGB mode (and introduces it for monochrome composite).
2019-02-26 22:21:49 -05:00
Thomas Harte
cd055a0298
Introduces an upper bound on output resolution, and resolves full-screen clear colour.
2019-02-25 22:07:48 -05:00
Thomas Harte
8f2abab0d9
Ensures texture targets are initially clear.
2019-02-25 21:55:14 -05:00
Thomas Harte
4c5dee866b
Ensures a proper black fill for Luminance8Phase8
input data.
2019-02-25 21:32:15 -05:00
Thomas Harte
7bb90c78d9
Resolves out-of-bounds initial condition whenever this loop began with start_line = 2047.
...
This, I believe, was the remaining cause of screen flashes.
2019-02-24 19:50:19 -05:00
Thomas Harte
a6e61ef83b
Reverts the clear colour to black.
...
The change was related to debugging; it was not intentionally committed.
2019-02-24 14:36:08 -05:00
Thomas Harte
c775a6c0f8
Introduces but disables a couple of bits of logging that might be helpful again in the future.
2019-02-24 14:30:39 -05:00
Thomas Harte
2f9e825728
Forces the outward-communicated composite angles to have the same precision as the cycle counts.
...
While also making a minor improvement to output range. Which is neither here nor there.
2019-02-24 14:29:43 -05:00
Thomas Harte
2f491b5be1
Reintroduces fragment snapping for composite colour sampling.
...
Thereby uncovers some sort of slightly-off recording of scan lines. On the Apple II, individual scans reach the ScanTarget at a density of exactly 0.25 colour cycles per pixel. So that timing information propagates exactly. But the whole lines that are composed via ::announce end up trying to fit 0.250154 colour cycles per pixel. Which creates a phase error as the display progresses from left to right.
This will need to be resolved in order to be able to fix the Apple II's intended colour phase. But, also, it's probably what was wrong with the Oric. And, quite possibly, why the single-step shader didn't work.
2019-02-24 13:39:14 -05:00
Thomas Harte
de7ebead23
Ensures the line_allocation_has_failed_ condition can be exited.
2019-02-21 22:30:41 -05:00
Thomas Harte
c0c4704419
Ensures that failure to allocate a line blocks all other allocations.
2019-02-21 21:38:48 -05:00
Thomas Harte
080f949f89
Ensures OpenGL version is logged prior to any other GL calls.
2019-02-20 20:21:17 -05:00
Thomas Harte
9f6956bd87
Awards default values to Scan
, to appease GCC 7.3.
2019-02-19 21:40:42 -05:00
Thomas Harte
ddf5e1632d
Ensures log memory is automatically initialised.
2019-02-18 22:08:03 -05:00
Thomas Harte
40bfde41cb
Adds an OpenGL version shout out.
2019-02-18 22:01:56 -05:00
Thomas Harte
e0751af56d
Handles the 0 return case.
2019-02-18 21:56:49 -05:00
Thomas Harte
3979faf43b
Gets more explicit about potential causes of failure.
2019-02-18 21:53:35 -05:00
Thomas Harte
878b480a44
Tidies up marginally.
2019-02-18 21:37:07 -05:00
Thomas Harte
b35b6b2ba8
Resolves a couple of missing #includes for cassert
.
2019-02-18 21:29:39 -05:00
Thomas Harte
6b2e1fe62b
Makes error reporting more communicative.
2019-02-18 11:13:54 -05:00
Thomas Harte
8ecf885629
Attempts to put in better OpenGL safety rails.
2019-02-18 10:29:40 -05:00
Thomas Harte
6d76b7cd94
Attempts to ensure proper colour output during alternating PAL lines.
2019-02-17 21:50:15 -05:00
Thomas Harte
7bd721f334
Resolves improper state if an end-of-frame clear is triggered by the first new line.
2019-02-17 21:49:53 -05:00