Thomas Harte
495024d6fe
Cleans up all redundant lock/unique_guard declarations.
2020-06-15 00:24:10 -04:00
Thomas Harte
902b33d25d
Makes more failing attempts at a clean shutdown.
2020-06-15 00:00:44 -04:00
Thomas Harte
ac732e2e7b
Attempts to ensure clean shutdown.
2020-06-14 23:38:44 -04:00
Thomas Harte
d08ffd6c8b
Makes sure the timer really, really is on a different thread.
...
Thereby allows me substantially to reduce audio latency.
2020-06-14 23:22:00 -04:00
Thomas Harte
530ff7471d
Adds a virtual destructor, given how these things might be held.
2020-06-14 21:14:51 -04:00
Thomas Harte
79833deeaf
With some attempt at vsync prediction, seeks to smooth audio/video output.
...
There's plenty more work to do here, but hopefully it takes the issue immediately off the table.
2020-06-14 19:26:56 -04:00
Thomas Harte
405e9e7c68
Shunts audio into its own QThread.
...
For the record, this was the first means I found of attempting that which actually seemed to work. A plain QThread, with something `connect`ed to its `started` signal didn't seem to work (perhaps `connect` is smart at thread confinement?), `moveToThread` didn't work on the audio output after the fact, etc.
2020-06-10 22:14:54 -04:00
Thomas Harte
5f13ee7c19
Simplifies AudioBuffer by consolidating logic into writes.
...
This is kind of fiddling in the margins though; I'm having a lot of difficulty determining the semantically-correct way to get Qt not to funnel all activity through a single thread.
2020-06-09 23:56:08 -04:00
Thomas Harte
d9f02aecdf
Adds an additional buffer. To reduce latency. No, really.
...
Specifically: there's no way to guarantee no overbuffering due to the startup race, other than having QAudioOutput obtain data by pull rather than push. But if it's pulling then that implies an extra buffer. And since the sizes it may pull are not explicit, there's guesswork involved there.
So: no extra buffer => uncontrollable risk of over-buffering. Extra buffer => a controllable risk of over-buffering.
2020-06-09 00:01:22 -04:00
Thomas Harte
bcb23d9a15
Attempt to reduce audio latency. Unsuccessfully.
2020-06-08 21:30:35 -04:00
Thomas Harte
d027450502
Consolidates timer/thread ownership for the timer.
2020-06-07 00:31:46 -04:00
Thomas Harte
63ad1290f4
Actually, QIODevice is listed as reentrant. So no need to forward audio.
...
That said, latency is still absurd for some reason.
2020-06-06 23:47:57 -04:00
Thomas Harte
7c7cb61d2f
Corrects missing audio, at the cost of frame rate.
...
I'm now spinning on the ability of QAudioOutput to accept additional data.
2020-06-06 22:35:50 -04:00
Thomas Harte
68b165e244
QIODevice isn't guaranteed thread safe, so use of it is now thread confined.
2020-06-06 21:14:04 -04:00
Thomas Harte
fe1b6812f1
Fixes processing cap and attempts full-rate video output.
...
Audio now seems to be present, though hugely stuttered.
2020-06-06 19:47:35 -04:00
Thomas Harte
378ff39e5e
Makes an unsuccessful attempt at producing audio.
...
On the plus side, it does seem successfully to sniff out an appropriate audio format and to communicate mono/stereo onward.
2020-06-06 19:19:01 -04:00
Thomas Harte
e47cb91223
Pushes rudimentary keyboard input.
2020-06-05 23:06:28 -04:00
Thomas Harte
d62fb16a58
Adds an eventFilter, in order to steal keypresses.
2020-06-05 22:11:17 -04:00
Thomas Harte
235efcb2d4
Attempts to silence asserts, etc, for release builds.
2020-06-04 23:14:51 -04:00
Thomas Harte
a6ada129e8
Adds very low quality, race-condition infested video output.
2020-06-04 22:58:02 -04:00
Thomas Harte
a681576d6c
Adds redraw logic.
...
If you sit around and constantly reeize the window, you can now see that a machine is running.
2020-06-04 22:39:32 -04:00
Thomas Harte
fdc234ed3b
Advances to having a selected machine actually run.
...
Albeit, invisibly.
2020-06-03 23:39:16 -04:00
Thomas Harte
e2ceb77501
Attempts to start updating a started machine.
...
No real progress on graphics output though.
2020-06-03 00:21:37 -04:00
Thomas Harte
11c28357a1
Implements a basic ROM installation loop.
...
Albeit that I need to figure out how layouts work to keep that request view at least centred.
2020-06-02 23:35:01 -04:00
Thomas Harte
f215405beb
Corrects capitalisation errors.
2020-06-02 23:27:29 -04:00
Thomas Harte
ba2a0600dc
Adds a basic Qt ROM fetcher and attempt to create a machine.
2020-06-01 23:14:57 -04:00
Thomas Harte
ab53165b34
Adds note on implementation obstacle.
2020-06-01 22:08:21 -04:00
Thomas Harte
a30723c3d4
Cleans up a little and ensures a safe exit of the timer thread.
2020-05-31 23:58:19 -04:00
Thomas Harte
d64b4fbc26
Adds a Qt timer class. Precision seems to be 'acceptable'.
2020-05-31 23:39:08 -04:00
Thomas Harte
73131735fa
Further qmake warning corrections.
2020-05-30 19:31:17 -04:00
Thomas Harte
5e0bea9d1c
Adds all header files to the QMake project.
2020-05-30 16:48:52 -04:00
Thomas Harte
48afc54af6
Cuts down unused parameter warnings to just a few that may well indicate implementation errors.
2020-05-30 01:06:43 -04:00
Thomas Harte
d066dd2b44
Resolves further unused parameter warnings.
...
Also adds warning to Xcode build, for better symmetry with Qt defaults.
2020-05-30 00:58:10 -04:00
Thomas Harte
0bf7de9d43
Advances to actually completing a build.
...
Many more warnings to iron out, however.
2020-05-30 00:47:43 -04:00
Thomas Harte
267006782f
Starts to add Qt target; resolves many build warnings.
2020-05-30 00:37:06 -04:00
Thomas Harte
743353a0ed
Merge pull request #799 from TomHarte/WindowsBuildErrors
...
Fixes a couple of Windows build errors.
2020-05-27 21:42:06 -04:00
Thomas Harte
f7c10ef9e9
Replaces POSIX stpncpy with ANSI strlen, memcpy and memset.
2020-05-27 21:31:46 -04:00
Thomas Harte
ecb44711d1
Add glext.h.
2020-05-27 21:20:43 -04:00
Thomas Harte
0f2f776e6a
Merge pull request #797 from TomHarte/Serialisation
...
Adds BSON serialisation and deserialisation for all reflectable structs.
2020-05-26 23:18:41 -04:00
Thomas Harte
1308f119a6
Relocates cassert.
2020-05-26 23:07:26 -04:00
Thomas Harte
51d684820f
Attempts to add array support to ::set and BSON deserialisation.
2020-05-26 22:55:55 -04:00
Thomas Harte
023d76a3e7
Permits int truncation, adds double decoder. Arrays still TODO.
2020-05-26 22:20:15 -04:00
Thomas Harte
4d34d9ae2b
Implements BSON deserialisation, other than arrays.
2020-05-25 23:39:00 -04:00
Thomas Harte
c83c827484
Adds necessary header for math.
2020-05-24 12:19:20 -04:00
Thomas Harte
b8b880a91d
Extends encoding to handle vector<uint8_t>, floats and doubles.
2020-05-24 01:20:48 -04:00
Thomas Harte
bb2f21a22e
Encodes enumerated values as strings.
2020-05-23 22:54:43 -04:00
Thomas Harte
b3587d4cde
Corrects: logic for int promotion, object sizes, int64_t gets, sizes prefixed to objects.
2020-05-22 23:38:07 -04:00
Thomas Harte
39ffe45f3c
Attempts to add support for arrays.
2020-05-22 21:55:12 -04:00
Thomas Harte
d36e592afb
Starts towards BSON serialisation for all deflectable structs.
...
Still to be tackled: arrays, enumerated types should probably be encoded as strings, deserialisation, probably distinguish get and fuzzy_get...
2020-05-22 00:31:40 -04:00
Thomas Harte
74fb697fa6
Merge pull request #796 from TomHarte/MintBuildIssues
...
Increases const correctness.
2020-05-20 23:52:16 -04:00
