Thomas Harte
|
4d5d5041df
|
Attempted to ensure a clean startup.
|
2017-08-01 22:18:42 -04:00 |
|
Thomas Harte
|
587eb3a67c
|
Factored interrupt counting out of the CRTCBusHandler.
|
2017-08-01 22:15:39 -04:00 |
|
Thomas Harte
|
6ca07f1e28
|
I guess it might end up living somewhere else, but introduced a header with the compiler-specific stuff to allow me to force things inline.
|
2017-08-01 22:04:58 -04:00 |
|
Thomas Harte
|
8d39a20088
|
Added proper output of mode 3, were anything ever to try to use it.
|
2017-08-01 21:51:41 -04:00 |
|
Thomas Harte
|
4b6370eb86
|
Realised my colour error: mapping the ROM numbers as though they were the hardware numbers. Having fixed that, spotted that I was deserialising R and B the wrong way around and dividing by too much. Colours now appear to be correct.
|
2017-08-01 21:47:52 -04:00 |
|
Thomas Harte
|
c6e340a8a2
|
Wired up the vsync signal. Pen 15 no longer flashes like crazy. Still can't figure out why the palette is so askew; was looking for perhaps some sort of detection of a green screen rather than a colour one, but there's no obvious input for that.
|
2017-08-01 21:21:59 -04:00 |
|
Thomas Harte
|
31c7153301
|
Corrected bit to colour mapping for modes 0 and 1. The total palette is still way off but there's consistency between modes now.
|
2017-08-01 20:52:42 -04:00 |
|
Thomas Harte
|
7e04d00cc1
|
Fixed key values, causing the new set of keys to work, decreased quantity of output and ensured that pixels appear in modes 0 and 2.
|
2017-08-01 20:39:10 -04:00 |
|
Thomas Harte
|
9d43784c65
|
Significantly increased quantity of keys forwarded.
|
2017-08-01 20:37:55 -04:00 |
|
Thomas Harte
|
eca9586a0f
|
Fixed: input value is no longer overwritten by 0xff. The '0' key now works.
|
2017-08-01 20:19:02 -04:00 |
|
Thomas Harte
|
0267bc237f
|
Added the ability to set a port input, and relaxed bus state testing. I think my on-demand bus reactions here are inappropriate, so more work to do here probably.
|
2017-08-01 18:04:51 -04:00 |
|
Thomas Harte
|
2e4577f741
|
Made a game attempt at implementing a (sticky) keyboard. No effect yet.
|
2017-08-01 17:52:05 -04:00 |
|
Thomas Harte
|
f5b278d683
|
Added enough stuff to put the emulated Amstrad CPC in a state of knowing whether its '0' key is pressed.
|
2017-08-01 17:31:56 -04:00 |
|
Thomas Harte
|
e6854ff8db
|
Corrected typo: the input to an AY is BDIR, not BCDIR.
|
2017-08-01 17:06:57 -04:00 |
|
Thomas Harte
|
3b292273c7
|
Fixed: BC2 is always implicitly set. The machine is now periodically checking the AY's register 14 (i.e. the first input port), so probably there's enough here now to implement keyboard input.
|
2017-08-01 17:05:11 -04:00 |
|
Thomas Harte
|
cb732e5d5f
|
Made an attempt to wire in an [unclocked] AY, in an endeavour to get to keyboard reading.
|
2017-08-01 17:01:58 -04:00 |
|
Thomas Harte
|
2d4e202be3
|
Completed dangling comment.
|
2017-08-01 17:01:36 -04:00 |
|
Thomas Harte
|
64da8e17d1
|
Fixed: of course this should take a reference to an existing port handler rather than hatching its own; otherwise additional communication with a port handler by an i8255 owner doesn't work as intended.
|
2017-08-01 17:01:20 -04:00 |
|
Thomas Harte
|
08ad35efd9
|
It's barely an implementation of the 8255, but ensured that data is bounced into the PortHandler, conveniently assuming the interaction mode used by the CPC.
|
2017-08-01 16:34:13 -04:00 |
|
Thomas Harte
|
58b98267fc
|
Formally transferred ownership of PIO accesses to an incoming template, and decided to start being explicit about how to specify the interfaces and provide fallbacks for optional behaviour for the new, clean generation of interfaces. A full-project sweep will inevitably occur but I'll try to tie off this branch first.
|
2017-08-01 16:15:19 -04:00 |
|
Thomas Harte
|
ace71280a0
|
Removed implementation file; this is only ever going to be a template.
|
2017-08-01 16:00:17 -04:00 |
|
Thomas Harte
|
a27946102a
|
Took a shot at the interrupt counter. Attempts at keyboard reading now recur so it'll probably do for now. I think that next puts me into the realm of needing to implement the 8255.
|
2017-08-01 15:49:16 -04:00 |
|
Thomas Harte
|
1d99c116e7
|
Actually, this is probably more correct: increment and then compare, but increment the refresh address once more after the final character, to avoid repeating it.
|
2017-08-01 15:29:37 -04:00 |
|
Thomas Harte
|
ee27e16fb1
|
Switched to post-tests increment. Seems to give proper screen width, but also eliminates that 'compare to +1' step that felt unlikely.
|
2017-08-01 15:19:25 -04:00 |
|
Thomas Harte
|
6ac7132799
|
Had a quick go at properly outputting Mode 1, adding wiring to communicate palette and mode changes to the CRTC bus handler. Colours are off but it's sufficient for now.
|
2017-08-01 15:16:13 -04:00 |
|
Thomas Harte
|
ca42abab70
|
Doubled up to ensure that every byte that should be inspected is represented. This makes it clearer that I'm on the right road. A garbled version of 'Amstrad 64k Microcomputer' can be discerned, in a weird grayscale and with the right-hand column missing and skewed output as a result.
|
2017-08-01 07:56:44 -04:00 |
|
Thomas Harte
|
933d69a256
|
Fixed slightly: the CPC wiki has a typo. It's 12 and 13 that move up to 14 and 15.
|
2017-08-01 07:51:13 -04:00 |
|
Thomas Harte
|
3b1db14817
|
Made a quick attempt at properly updating the refresh address.
|
2017-08-01 07:36:03 -04:00 |
|
Thomas Harte
|
10a5581aea
|
Made first attempt at offering some sort of pictographic of actual RAM contents.
|
2017-08-01 07:34:12 -04:00 |
|
Thomas Harte
|
3ae699964f
|
Ensured an actual pixel stream is supplied for pixel regions. Though it's just a long stream of white pixels for now. So visual output is unchanged.
|
2017-08-01 07:24:29 -04:00 |
|
Thomas Harte
|
9d953421d8
|
After a quick check, added a couple of other _delegate initialisations. I should probably find a way to template this.
|
2017-08-01 07:07:43 -04:00 |
|
Thomas Harte
|
763e3b65d1
|
Ensured a proper initial value for delegate_.
|
2017-07-31 22:46:06 -04:00 |
|
Thomas Harte
|
42dd27c9b1
|
Shunted method bodies inline, given that there's no need for a declaration/definition distinction.
|
2017-07-31 22:39:25 -04:00 |
|
Thomas Harte
|
2b168f7383
|
Disabled the address sanitiser as an every-time run again, as it just pushes my computer a bit too far.
|
2017-07-31 22:32:56 -04:00 |
|
Thomas Harte
|
0536f089e1
|
Eliminated old-[personal-]fashioned line break.
|
2017-07-31 22:32:26 -04:00 |
|
Thomas Harte
|
3df13cddd4
|
As per my keenness for cleanliness improvements corresponding to my ever-increasing C++ ability: turned the Amstrad into something that a factory produces, allowing me completely to hide a bunch of implementation details.
|
2017-07-31 22:32:04 -04:00 |
|
Thomas Harte
|
e3f677fa37
|
I was under-counting row lines. Adjusted comparison. The emulator now produces a solid white square of approximately correct proportions. I'm sure that filling in pixels will reveal the next set of bugs.
|
2017-07-31 22:21:46 -04:00 |
|
Thomas Harte
|
c2253c1e0f
|
Fixed multiplier: the dot clock I've used to instantiate the CRT is the pixel clock, not the character clock.
|
2017-07-31 22:17:46 -04:00 |
|
Thomas Harte
|
5c68b6cc21
|
Fixed display enable reset when there's no adjustment area. A practical lesson in failure to factor.
|
2017-07-31 22:16:08 -04:00 |
|
Thomas Harte
|
ffaa627820
|
Fixed frame restart when there is no adjustment period.
|
2017-07-31 22:13:45 -04:00 |
|
Thomas Harte
|
f742fd5d4a
|
Made basic attempt to get something on screen: white where the display is enabled, black for the border.
|
2017-07-31 22:13:20 -04:00 |
|
Thomas Harte
|
69b99fe127
|
Transferred ownership of the CRT to the CRTC bus handler, to give it easy access.
|
2017-07-31 22:04:52 -04:00 |
|
Thomas Harte
|
5a396f6787
|
Added an explicit cast.
|
2017-07-31 22:04:31 -04:00 |
|
Thomas Harte
|
cb0dc7b434
|
I'm sure it's not going to be this easy, but this is a genuine attempt at full horizontal and vertical timing.
|
2017-07-31 22:01:54 -04:00 |
|
Thomas Harte
|
e28829bd1b
|
Corrected CRTC timing, gave it someone to talk to and a means with which to talk.
|
2017-07-31 20:14:46 -04:00 |
|
Thomas Harte
|
68ceeab610
|
Created a 6845 class and started pushing data at it and clocking it. It doesn't currently have the concept of a bus but will do, hence the in-header implementation.
|
2017-07-31 19:56:59 -04:00 |
|
Thomas Harte
|
68dca9d047
|
Made a first attempt at ROM paging, with pretty much the same scheme that'll be needed for 128kb support.
|
2017-07-31 19:37:28 -04:00 |
|
Thomas Harte
|
d88ca151f4
|
Added a first attempt at output port decoding. Just logging for now.
|
2017-07-31 19:25:10 -04:00 |
|
Thomas Harte
|
3c90218c3d
|
With a very basic stab at something a bit like the memory map (sans paging), execution begins.
|
2017-07-31 19:15:43 -04:00 |
|
Thomas Harte
|
afd409c883
|
Ensured that ROM images are loaded and passed to the Amstrad CPC.
|
2017-07-31 18:44:49 -04:00 |
|