Thomas Harte
|
7327da6350
|
Switched the nascent TZX to use the new PulseQueuedTape.
|
2017-07-16 22:06:56 -04:00 |
|
Thomas Harte
|
8f72fc4a44
|
Factored out from the UEF implementation the concept of being a tape that has a queue of pending pulses and manages that queue.
|
2017-07-16 22:04:40 -04:00 |
|
Thomas Harte
|
238348c885
|
Performed the initial wiring to announce that this application supports TZX files and to route them to the ZX80/81 static analyser. The TZX class itself does not yet do much beyond basic validation. I think it'll be easiest if it follows in UEF's footsteps in queuing up pulses ahead of time, so some factoring out is now required.
|
2017-07-16 21:33:11 -04:00 |
|
Thomas Harte
|
b3861ff755
|
Reduced copying of Pulses.
|
2017-07-16 19:49:31 -04:00 |
|
Thomas Harte
|
c2bc34fd87
|
Eliminated the PLLParser class. I think the proper abstraction if and when another machine requires PLL-esque parsing is probably to template out the Acorn wiring of a PLL to a Parser, and/or generalise the Acorn shifter. It'll be easier to decide when the time comes.
|
2017-07-16 19:25:26 -04:00 |
|
Thomas Harte
|
1d3ae31755
|
Abstracted the concept of an Acorn shifter away from being a PLLParser. The Acorn tape parser now skips using that class and uses the shifter. The actual Electron also uses the shifter. So the two are completely aligned. Net result: the Electron should successfully load exactly when static analysis was successful.
|
2017-07-16 19:24:01 -04:00 |
|
Thomas Harte
|
e5188a60dc
|
Settled on the new average-of-length approach to a PLL window sizing, eliminating the old errors-of-phase approach. Since it anchors automatically to the original target clocks per bit, killed the explicit mention of a tolerance.
|
2017-07-16 19:03:50 -04:00 |
|
Thomas Harte
|
e71d13c090
|
With the new PLL implementation, switching to a deeper window size returns the Acorn tape parser to: working.
|
2017-07-16 17:12:12 -04:00 |
|
Thomas Harte
|
c8575fe6e0
|
Mild clean ups, and a tweak to permitted top and bottom phase.
|
2017-07-16 13:39:08 -04:00 |
|
Thomas Harte
|
253f9603ed
|
Split the normal tape parser class into two in order to add a new option: a PLL-driven tape parser. Decided to see what happens if I attempt to use that to parse CSW Acorn data.
|
2017-07-15 19:07:35 -04:00 |
|
Thomas Harte
|
b743566339
|
Corrected under-request of data: was erroneously supplying the size of input as the expected size of output.
|
2017-07-15 15:19:03 -04:00 |
|
Thomas Harte
|
648618d280
|
Tweaked bit timing decision.
|
2017-07-13 21:26:05 -04:00 |
|
Thomas Harte
|
ae1a130843
|
Fixed: length of 0 is a special case.
|
2017-07-13 20:57:27 -04:00 |
|
Thomas Harte
|
f09fe30af5
|
Attempted a full implementation of CSW. All in memory for now.
|
2017-07-12 21:23:59 -04:00 |
|
Thomas Harte
|
33eadb5549
|
Started taking further steps towards CSW support; reading the ZLib documentation is next.
|
2017-07-11 22:41:10 -04:00 |
|
Thomas Harte
|
368bff1a82
|
Added a shell class that will one day be able to parse CSW files, plus the logic and metadata to instantiate it when a CSW presents itself.
|
2017-07-10 21:43:58 -04:00 |
|
Thomas Harte
|
bcb7c27cc4
|
Given that I'm not racing this any more, turned the intended 1 second back into 1 second.
|
2017-07-08 19:21:33 -04:00 |
|
Thomas Harte
|
2f42874fd3
|
Another fix to deal with real-time fighting: allow 8 and 18 pulses to be recognised as 1s and 0s. That's because the hand-off from ROM routines to parsing may occur very shortly before the first pulse of a valid sequence, making it look like there's a ghost. A cleaner solution needs to be found, probably revolving around allowing parsers to be attached to tapes and therefore to run constantly.
|
2017-07-06 22:33:03 -04:00 |
|
Thomas Harte
|
84d0e9b4cd
|
Accept a pulse that begins exactly on seek_time as being found while seeking.
|
2017-07-06 22:31:45 -04:00 |
|
Thomas Harte
|
a53011f778
|
Extended intro and outro length because right now I'm racing this myself. Can return to normal once tape motor control is implemented.
|
2017-07-06 22:31:12 -04:00 |
|
Thomas Harte
|
919fc48cc5
|
Fixed dumb out-of-bounds access error.
|
2017-06-22 22:28:50 -04:00 |
|
Thomas Harte
|
52d9ddf9e5
|
Gave the binary tape player a more logical assignment of wave level to output level. Which miraculously appears to have been the issue with the ZX80/81 tape loading — the inconsistency of silences seems to have been the issue.
|
2017-06-21 22:13:24 -04:00 |
|
Thomas Harte
|
22de481557
|
Made an attempt to get .p/.80 checked and as far as the emulated machine.
|
2017-06-12 19:41:59 -04:00 |
|
Thomas Harte
|
77aa3c187e
|
Rebranded ZX80O as ZX80O81P, with an eye to making it accept ZX81 .p files. Adjusted the initial selection part of the static analyser appropriately.
|
2017-06-11 21:38:32 -04:00 |
|
Thomas Harte
|
ee0283c985
|
Modified to use an in-memory buffer for file contents.
|
2017-06-11 21:35:09 -04:00 |
|
Thomas Harte
|
2c6414ce11
|
Adjusted to allow inspect_waves to swallow a gap before a bit if necessary, increasing the opportunities for its call.
|
2017-06-11 18:31:09 -04:00 |
|
Thomas Harte
|
e5aea632ee
|
Updated curly bracket placement.
|
2017-06-11 17:29:22 -04:00 |
|
Thomas Harte
|
256ba4028b
|
Rejigged to eliminate semi-duplication of the is-a-file test.
|
2017-06-08 21:52:13 -04:00 |
|
Thomas Harte
|
b07af2660d
|
Adjusted to make sure that the very end of a tape is properly measured.
|
2017-06-08 21:33:35 -04:00 |
|
Thomas Harte
|
bc0d70b2f7
|
Added: a shout-out when the tape has been exhausted.
|
2017-06-08 21:32:27 -04:00 |
|
Thomas Harte
|
c6e48dfd56
|
Given that a final gap is semantically part of describing tape contents, ensured one formally appears before declaring that the tape has ended.
|
2017-06-08 21:31:54 -04:00 |
|
Thomas Harte
|
ee4c8b5ad2
|
Ensured final byte plays out.
|
2017-06-08 19:51:49 -04:00 |
|
Thomas Harte
|
7e10c7f9d8
|
Relocated the ZX80/81 concept of a 'file' out from Tape into Data, given that it's an exact duplicate of memory.
|
2017-06-08 19:09:51 -04:00 |
|
Thomas Harte
|
c47128f433
|
Widened tolerances and ensured zero bits aren't prematurely discarded.
|
2017-06-07 17:50:03 -04:00 |
|
Thomas Harte
|
8aab9acc10
|
Eliminated use of the zero level; now definitively returns a low/high input.
|
2017-06-07 17:39:29 -04:00 |
|
Thomas Harte
|
dbd2944c13
|
Took an initial run at the ZX80/81 parser.
|
2017-06-07 17:27:05 -04:00 |
|
Thomas Harte
|
4603fa6f24
|
Extended explicitly to support a token of lookahead, which is pretty much what was on offer anyway. Also corrected instance variable names, as per better adoption of C++ norms.
|
2017-06-07 17:21:57 -04:00 |
|
Thomas Harte
|
60300851ea
|
Started sketching out a tape parser for ZX80 and '81 files. I think this'll help me to verify whether the .O input is working.
|
2017-06-07 10:12:13 -04:00 |
|
Thomas Harte
|
58312ea2b7
|
Updated to new standardisation on curly bracket placement.
|
2017-06-07 10:05:43 -04:00 |
|
Thomas Harte
|
cb534d8b85
|
Corrected comment.
|
2017-06-07 10:05:16 -04:00 |
|
Thomas Harte
|
4677cebf40
|
Rejigged to correct: spaces go after bits, not after bytes.
|
2017-06-06 18:29:15 -04:00 |
|
Thomas Harte
|
7399f3d798
|
Caveman debugging in place, it looks like this file is returning nonsense.
|
2017-06-06 18:18:55 -04:00 |
|
Thomas Harte
|
faeecf7665
|
Made sure that there's nothing but silence at the end of the tape, even if the .O file is too long.
|
2017-06-06 18:16:47 -04:00 |
|
Thomas Harte
|
8c1769f157
|
Made a quick attempt at serialising from ZX80 .O to waves.
|
2017-06-04 16:59:26 -04:00 |
|
Thomas Harte
|
655809517c
|
Ensured that there is a subclass of file that is entrusted to load .O/.80 files, and that the code routes such files to it, noting that it should consider whether a ZX80 is required.
|
2017-06-04 16:37:03 -04:00 |
|
Thomas Harte
|
2807e3134f
|
Implemented speedy header finding. So that's half of it.
|
2017-05-07 20:32:48 -04:00 |
|
Thomas Harte
|
3f7f2c6117
|
'Tape' has joined the new underscore orthodoxy.
|
2016-12-03 12:05:19 -05:00 |
|
Thomas Harte
|
8499783b14
|
Dragged multibyte primitives and signature checks up to the base class. Implemented support for Oric MFM-style .DSK, at the file format level.
|
2016-11-21 20:47:16 +08:00 |
|
Thomas Harte
|
31c2548804
|
Created a base class for the boilerplate fopen stuff, switched as many classes as possible to its use, switched to postfix underscores and non-camelCase names.
|
2016-11-21 20:14:09 +08:00 |
|
Thomas Harte
|
97811fe590
|
Made minor fix to ensure that a header that appears to extend beyond the end of an Oric .TAP doesn't create an ostensibly endless tape.
|
2016-11-15 12:02:03 +08:00 |
|