Thomas Harte
|
ad3a98387f
|
Within the Typer framework: hatched out CharacterMapper as a distinct thing from the target for keypresses, better to formalise responsibility but also to make it easy cleanly to sever that stuff into its own little part.
|
2017-08-03 11:42:31 -04:00 |
|
Thomas Harte
|
985fbf59c2
|
Merge pull request #169 from TomHarte/Z80HasA
Converts the Z80 into a BusAdaptor-type component
|
2017-08-02 22:42:49 -04:00 |
|
Thomas Harte
|
2f2071be8a
|
These should actually both be in the public header, as the types are used in an exposed method.
|
2017-08-02 22:18:30 -04:00 |
|
Thomas Harte
|
6d510e4e70
|
Made it no longer public knowledge that any sort of Typer is involved in being a ZX80/81.
|
2017-08-02 22:17:22 -04:00 |
|
Thomas Harte
|
8e0736fbe6
|
Reinstated typing ability, albeit with an ugly inline insertion. But I think I can defer dealing with typers to another pull request. The whole issue of keyboard mapping probably needs reappraisal.
|
2017-08-02 22:16:09 -04:00 |
|
Thomas Harte
|
681d1e2f8d
|
Breaking its typer for now, adapted the ZX80/81 to having a Z80, not being one.
|
2017-08-02 22:12:59 -04:00 |
|
Thomas Harte
|
42e70ef993
|
Adjusted slightly as per Z80 change, and to pull everything internally declared into the Amstrad CPC namespace.
|
2017-08-02 22:11:03 -04:00 |
|
Thomas Harte
|
039811ce6a
|
Switched the Z80 to being something a machine has, not something a machine is.
|
2017-08-02 22:09:59 -04:00 |
|
Thomas Harte
|
a54ccd1969
|
Merge pull request #168 from TomHarte/CPC
Adds an initial Amstrad CPC 464 emuation
|
2017-08-02 20:50:02 -04:00 |
|
Thomas Harte
|
707821ca55
|
Added the normal readme to explain what's omitted here.
|
2017-08-02 20:45:14 -04:00 |
|
Thomas Harte
|
d3bf8fa53b
|
Upped the documentation.
|
2017-08-02 20:37:26 -04:00 |
|
Thomas Harte
|
f5e2dd410e
|
Constrained output to the centre 90%.
|
2017-08-02 19:55:44 -04:00 |
|
Thomas Harte
|
3ca9c38777
|
Attempted to move to more accurate bus reading — if control lines are set then all subsequent data inputs should act according to the current control lines; changes to port input should be reflected live upon readings, etc.
|
2017-08-02 19:45:58 -04:00 |
|
Thomas Harte
|
2d2cefb0b0
|
Adjusted factoring to introduce support for block 10.
|
2017-08-02 14:36:47 -04:00 |
|
Thomas Harte
|
2fd071e45d
|
Made an honest attempt at outputting turbo speed data block data. The CPC now at least starts to load.
|
2017-08-02 14:24:34 -04:00 |
|
Thomas Harte
|
d7a5c3f49a
|
Added support for the ID 20 block and fixed a minor error in my skip-the-contents version of block 11: length is three bytes long, not two. This gives me enough structure properly to get to the end of my current test CDT, albeit without making any of the noises.
|
2017-08-02 14:12:34 -04:00 |
|
Thomas Harte
|
819761f9fb
|
Fixed another uninitialised pointer.
|
2017-08-02 13:56:35 -04:00 |
|
Thomas Harte
|
e50adf1cc8
|
Were my TZX support up to it, this would likely be sufficient for tape emulation.
|
2017-08-02 13:50:14 -04:00 |
|
Thomas Harte
|
dcab10f53e
|
Ensured the AY's async queue doesn't just fill and fill.
|
2017-08-02 07:38:35 -04:00 |
|
Thomas Harte
|
633d8965e2
|
Removed accidental logging commit.
|
2017-08-02 07:38:14 -04:00 |
|
Thomas Harte
|
f602f9b6ec
|
Adds an attempt to clock the AY.
|
2017-08-02 07:21:33 -04:00 |
|
Thomas Harte
|
f7e66dea61
|
Added a compound divide and convert.
|
2017-08-02 07:21:21 -04:00 |
|
Thomas Harte
|
bda9441620
|
Made an attempt to clock the AY.
|
2017-08-02 07:20:59 -04:00 |
|
Thomas Harte
|
4d5d5041df
|
Attempted to ensure a clean startup.
|
2017-08-01 22:18:42 -04:00 |
|
Thomas Harte
|
587eb3a67c
|
Factored interrupt counting out of the CRTCBusHandler.
|
2017-08-01 22:15:39 -04:00 |
|
Thomas Harte
|
6ca07f1e28
|
I guess it might end up living somewhere else, but introduced a header with the compiler-specific stuff to allow me to force things inline.
|
2017-08-01 22:04:58 -04:00 |
|
Thomas Harte
|
8d39a20088
|
Added proper output of mode 3, were anything ever to try to use it.
|
2017-08-01 21:51:41 -04:00 |
|
Thomas Harte
|
4b6370eb86
|
Realised my colour error: mapping the ROM numbers as though they were the hardware numbers. Having fixed that, spotted that I was deserialising R and B the wrong way around and dividing by too much. Colours now appear to be correct.
|
2017-08-01 21:47:52 -04:00 |
|
Thomas Harte
|
c6e340a8a2
|
Wired up the vsync signal. Pen 15 no longer flashes like crazy. Still can't figure out why the palette is so askew; was looking for perhaps some sort of detection of a green screen rather than a colour one, but there's no obvious input for that.
|
2017-08-01 21:21:59 -04:00 |
|
Thomas Harte
|
31c7153301
|
Corrected bit to colour mapping for modes 0 and 1. The total palette is still way off but there's consistency between modes now.
|
2017-08-01 20:52:42 -04:00 |
|
Thomas Harte
|
7e04d00cc1
|
Fixed key values, causing the new set of keys to work, decreased quantity of output and ensured that pixels appear in modes 0 and 2.
|
2017-08-01 20:39:10 -04:00 |
|
Thomas Harte
|
9d43784c65
|
Significantly increased quantity of keys forwarded.
|
2017-08-01 20:37:55 -04:00 |
|
Thomas Harte
|
eca9586a0f
|
Fixed: input value is no longer overwritten by 0xff. The '0' key now works.
|
2017-08-01 20:19:02 -04:00 |
|
Thomas Harte
|
0267bc237f
|
Added the ability to set a port input, and relaxed bus state testing. I think my on-demand bus reactions here are inappropriate, so more work to do here probably.
|
2017-08-01 18:04:51 -04:00 |
|
Thomas Harte
|
2e4577f741
|
Made a game attempt at implementing a (sticky) keyboard. No effect yet.
|
2017-08-01 17:52:05 -04:00 |
|
Thomas Harte
|
f5b278d683
|
Added enough stuff to put the emulated Amstrad CPC in a state of knowing whether its '0' key is pressed.
|
2017-08-01 17:31:56 -04:00 |
|
Thomas Harte
|
e6854ff8db
|
Corrected typo: the input to an AY is BDIR, not BCDIR.
|
2017-08-01 17:06:57 -04:00 |
|
Thomas Harte
|
3b292273c7
|
Fixed: BC2 is always implicitly set. The machine is now periodically checking the AY's register 14 (i.e. the first input port), so probably there's enough here now to implement keyboard input.
|
2017-08-01 17:05:11 -04:00 |
|
Thomas Harte
|
cb732e5d5f
|
Made an attempt to wire in an [unclocked] AY, in an endeavour to get to keyboard reading.
|
2017-08-01 17:01:58 -04:00 |
|
Thomas Harte
|
2d4e202be3
|
Completed dangling comment.
|
2017-08-01 17:01:36 -04:00 |
|
Thomas Harte
|
64da8e17d1
|
Fixed: of course this should take a reference to an existing port handler rather than hatching its own; otherwise additional communication with a port handler by an i8255 owner doesn't work as intended.
|
2017-08-01 17:01:20 -04:00 |
|
Thomas Harte
|
08ad35efd9
|
It's barely an implementation of the 8255, but ensured that data is bounced into the PortHandler, conveniently assuming the interaction mode used by the CPC.
|
2017-08-01 16:34:13 -04:00 |
|
Thomas Harte
|
58b98267fc
|
Formally transferred ownership of PIO accesses to an incoming template, and decided to start being explicit about how to specify the interfaces and provide fallbacks for optional behaviour for the new, clean generation of interfaces. A full-project sweep will inevitably occur but I'll try to tie off this branch first.
|
2017-08-01 16:15:19 -04:00 |
|
Thomas Harte
|
ace71280a0
|
Removed implementation file; this is only ever going to be a template.
|
2017-08-01 16:00:17 -04:00 |
|
Thomas Harte
|
a27946102a
|
Took a shot at the interrupt counter. Attempts at keyboard reading now recur so it'll probably do for now. I think that next puts me into the realm of needing to implement the 8255.
|
2017-08-01 15:49:16 -04:00 |
|
Thomas Harte
|
1d99c116e7
|
Actually, this is probably more correct: increment and then compare, but increment the refresh address once more after the final character, to avoid repeating it.
|
2017-08-01 15:29:37 -04:00 |
|
Thomas Harte
|
ee27e16fb1
|
Switched to post-tests increment. Seems to give proper screen width, but also eliminates that 'compare to +1' step that felt unlikely.
|
2017-08-01 15:19:25 -04:00 |
|
Thomas Harte
|
6ac7132799
|
Had a quick go at properly outputting Mode 1, adding wiring to communicate palette and mode changes to the CRTC bus handler. Colours are off but it's sufficient for now.
|
2017-08-01 15:16:13 -04:00 |
|
Thomas Harte
|
ca42abab70
|
Doubled up to ensure that every byte that should be inspected is represented. This makes it clearer that I'm on the right road. A garbled version of 'Amstrad 64k Microcomputer' can be discerned, in a weird grayscale and with the right-hand column missing and skewed output as a result.
|
2017-08-01 07:56:44 -04:00 |
|
Thomas Harte
|
933d69a256
|
Fixed slightly: the CPC wiki has a typo. It's 12 and 13 that move up to 14 and 15.
|
2017-08-01 07:51:13 -04:00 |
|