Thomas Harte
|
8ff1f82008
|
Fixed accidental channel duplication.
|
2016-04-22 19:18:28 -04:00 |
|
Thomas Harte
|
95639f1189
|
Made attempt to introduce final filtering stage and output.
|
2016-04-22 19:15:59 -04:00 |
|
Thomas Harte
|
23311d633b
|
Doubled phosphor life, added comment on required final stage fix for tomorrow.
|
2016-04-21 23:15:48 -04:00 |
|
Thomas Harte
|
59c07f7ddd
|
This, at least, is an attempt to decode chrominance, as yet unfiltered, and not commuted to RGB (and possibly packed incorrectly).
|
2016-04-21 23:01:54 -04:00 |
|
Thomas Harte
|
cc7bf97a9c
|
This now attempts to filter y.
|
2016-04-21 22:32:30 -04:00 |
|
Thomas Harte
|
e7ed1224a5
|
Introduced the second filtering stage, albeit that it presently does nothing whatsoever.
|
2016-04-21 21:32:36 -04:00 |
|
Thomas Harte
|
23ce032ba1
|
Started edging towards the necessary flexibility for the other two intermediate shaders.
|
2016-04-21 20:21:34 -04:00 |
|
Thomas Harte
|
4b9985626d
|
Started commuting alpha to direction. The incoming amplitude is now honoured.
|
2016-04-21 19:53:41 -04:00 |
|
Thomas Harte
|
638b08302b
|
The initial composite buffer is now genuinely a composite signal.
|
2016-04-21 19:37:32 -04:00 |
|
Thomas Harte
|
d9a9dffe63
|
Factored out wraparound buffer addressing where it's otherwise going to get really repetitive; need to look at using the same approach for the glTexSubImage2D step at least but that probably means properly encapsulating the buffer builder's state.
|
2016-04-20 21:05:32 -04:00 |
|
Thomas Harte
|
8232ed765e
|
Eliminated use of zero-alpha runs to clear new lines in the intermediate buffer in favour of a scissored glClear. It's just an easier way to scale the current approach to three intermediate buffers.
|
2016-04-20 20:44:25 -04:00 |
|
Thomas Harte
|
e2da77fb8b
|
Clarified constants, ensured monitor mode works from startup.
|
2016-04-19 22:53:39 -04:00 |
|
Thomas Harte
|
ef83595af3
|
Fixed: issue was (i) always thinking the entire source run buffer needed to be issued; and (ii) having fixed that, always thinking that the block that needs redrawing doesn't overflow the buffer. Fixed both. 'Television' mode is now working without explicit synchronisation (and with a lot less work).
|
2016-04-19 22:38:11 -04:00 |
|
Thomas Harte
|
3d7a3ce995
|
Eliminated some redundant texture binds.
|
2016-04-19 22:30:05 -04:00 |
|
Thomas Harte
|
145c0b3b71
|
Smoothed output device changes, killing some dead state. Added an explicit glFinish to suggest that the problem is synchronisation rather than any sort of data or shader error.
|
2016-04-19 22:21:26 -04:00 |
|
Thomas Harte
|
66f2c10c04
|
Resolved potential crash if tape requests are made without one inserted. Softened glFinish to glFlush, though I'm still not sure I should strictly need even that.
|
2016-04-19 21:00:48 -04:00 |
|
Thomas Harte
|
88e237b8de
|
Standardised indentation and added one extra piece of documentation.
|
2016-04-19 20:53:55 -04:00 |
|
Thomas Harte
|
20aa9e291d
|
Attempted to deal with the precision issues causing 'television' output currently to differ from 'monitor' output. Documented TextureTarget while I'm here.
|
2016-04-19 20:51:34 -04:00 |
|
Thomas Harte
|
6f52ed14d6
|
Trivially fixed. Appears to confirm an off-by-one error in the television implementation. Which would explain one of the visual phenomena — a repeating corrupted line.
|
2016-04-19 19:32:52 -04:00 |
|
Thomas Harte
|
b90a487a16
|
Attempted to enable both monitor and television output paths in the same codebase. The television route seems to be broken. Investigation required.
|
2016-04-19 19:30:50 -04:00 |
|
Thomas Harte
|
6c9bcfa637
|
Got rigorous on exceptions, started working towards having a working 'composite' shader at the same time as having a working RGB shader.
|
2016-04-19 08:05:43 -04:00 |
|
Thomas Harte
|
bcc784bda9
|
Introduced an interface for specifying attribute bindings, taking the opportunity to document the interface and introduce exceptions.
|
2016-04-19 07:23:15 -04:00 |
|
Thomas Harte
|
9d39c14752
|
Nothing of substance different; main current mystery: why do old frames recur and why does other jumpiness occur? Do I need some explicit synchronistion?
|
2016-04-18 22:18:03 -04:00 |
|
Thomas Harte
|
cf55a0c423
|
Fixed: composite output y is now incremented upon the start of retrace, that causing it to have different values at either edge of scans.
|
2016-04-18 21:49:45 -04:00 |
|
Thomas Harte
|
9580dde3ad
|
Fixed left/right shuffling. Was simply failing to supply the integer version of coordinates.
|
2016-04-18 21:40:23 -04:00 |
|
Thomas Harte
|
d5bac2f04f
|
Spotted error was in texture target all along. This now gets as far as showing something a lot like the correct display, but precision is way off. Way off.
|
2016-04-18 21:32:48 -04:00 |
|
Thomas Harte
|
bf29c8e2bf
|
Fixed mismatch in television/monitor selection, ticked view for drawing concurrently, since it can, removed stray space.
|
2016-04-18 19:01:15 -04:00 |
|
Thomas Harte
|
9ede284eb6
|
Added blanking source runs, ensuring the rolling buffer is appropriately cleared.
|
2016-04-17 20:34:52 -04:00 |
|
Thomas Harte
|
43cae267f9
|
Shuffled further in an attempt to get as far as having static but incorrectly-interpreted pixel data on screen. It's not currently static. So work to do.
|
2016-04-17 18:08:05 -04:00 |
|
Thomas Harte
|
a8fbd82a3d
|
Made an attempt at correctly mapping to eye coordinates.
|
2016-04-17 17:21:24 -04:00 |
|
Thomas Harte
|
ece51917fa
|
Added first attempt at performing the first step of television output: mapping from source data to the first of the processing buffers. It's immediately obvious that my eye coordinates are off.
|
2016-04-17 17:17:59 -04:00 |
|
Thomas Harte
|
abce0ed3c4
|
Added setup of the source vertex array.
|
2016-04-17 16:17:23 -04:00 |
|
Thomas Harte
|
6ff9ffba6c
|
Switching temporarily to an attempt to draw input runs as if RGB: shader compiles, fixed a race condition on out-of-bounds accesses for the source buffer.
|
2016-04-17 15:51:28 -04:00 |
|
Thomas Harte
|
104f44f27f
|
Attempted to improve deinterlacing, gave the CRT full control over blend mode, switched back to 2000000Mhz audio.
|
2016-04-14 22:20:47 -04:00 |
|
Thomas Harte
|
323f1a24db
|
Introduced blackout period solution to vertical sync confusing horizontal sync. Need to find out whether it's accurate.
|
2016-04-14 20:30:45 -04:00 |
|
Thomas Harte
|
026ce0255f
|
Source runs are now captured, and that buffer appropriately reset.
|
2016-04-13 22:20:13 -04:00 |
|
Thomas Harte
|
2ea02ed127
|
A source array buffer is also now created, mapped, unmapped, etc.
|
2016-04-13 22:14:18 -04:00 |
|
Thomas Harte
|
04d1b65c93
|
Reinstated texture target creation, cut them down to merely RGB.
|
2016-04-12 22:48:47 -04:00 |
|
Thomas Harte
|
4be8053ba9
|
Updated documentation.
|
2016-04-12 22:38:49 -04:00 |
|
Thomas Harte
|
4d889d9c7f
|
Made an attempt slightly to simplify the fragment processor, at both ends.
|
2016-04-12 22:35:11 -04:00 |
|
Thomas Harte
|
fe8b0ebc7e
|
Tidied up a little, mostly bumping things out of just-in-time creation that I can just do well in advance.
|
2016-04-12 22:31:13 -04:00 |
|
Thomas Harte
|
069ec2e889
|
In search of the cause of performance issues again, excised the per-pixel sin until it can be further evaluated.
|
2016-04-11 23:13:54 -04:00 |
|
Thomas Harte
|
d100c755b7
|
The final line runs on a diagonal. Leave room for that.
|
2016-04-11 23:13:14 -04:00 |
|
Thomas Harte
|
7276a06cc0
|
Added a helper to calculate a visible rect based on output timings, used it to scale the Electron output up to the full window size.
|
2016-04-11 21:47:23 -04:00 |
|
Thomas Harte
|
e45fe43801
|
Removed some dead caveman debugging.
|
2016-04-10 23:02:34 -04:00 |
|
Thomas Harte
|
bdb99ba92f
|
Corrections back towards composite output: fixed misnamed constant, ensured the CRT doesn't write nonsense to the output buffer, ensured it grows three vertices at a time rather than six when desired. Net effect should be that the output stage is working again, with the input processing remaining to fill in.
|
2016-04-10 22:56:52 -04:00 |
|
Thomas Harte
|
8701366277
|
Switched horizontal sync detection back to differential, switched the Electron to an XOR-style sync output (believed to be accurate, but I need to check), fixed some latent issues around vertical sync detection.
|
2016-04-10 21:34:40 -04:00 |
|
Thomas Harte
|
fc5530b513
|
Realising I've managed to confuse input and output, started shift to 'source' for what 'input' was.
|
2016-04-10 15:58:43 -04:00 |
|
Thomas Harte
|
6dbd20ffde
|
Expanded interface to rgb_sample to eliminate its need to make assumptions about globals, used expanded interface to compact Electron data to two pixels per byte.
|
2016-04-05 20:32:55 -04:00 |
|
Thomas Harte
|
c0cd1ed89e
|
Made an attempt to consolidate timestamp bases to a single vector and hence to lump all geometry into one or two calls, with no repetitive setting of a uniform. I'm not sure the result is correct yet.
|
2016-04-04 21:57:27 -04:00 |
|
Thomas Harte
|
729fddea1c
|
Switched to integer textures, likely to simplify for most use cases.
|
2016-04-04 19:39:01 -04:00 |
|
Thomas Harte
|
3ca58b2a57
|
Attemted further to diminish jumpiness.
|
2016-03-22 22:07:30 -04:00 |
|
Thomas Harte
|
8cd5d40e00
|
Made an attempt to reduce the amount of data heading to the GPU.
|
2016-03-22 21:16:32 -04:00 |
|
Thomas Harte
|
3038704977
|
Attempted to introduce a lowpass filter to the graphics output, reverted 6502 optimisations as seemingly not working.
|
2016-03-21 22:01:25 -04:00 |
|
Thomas Harte
|
197cf2a834
|
Commented out sync; it can probably be implicit.
|
2016-03-20 21:42:05 -04:00 |
|
Thomas Harte
|
9da7716c72
|
Attempted to simplify threading, thereby allowing machines to be constructed within a valid GL context, and started adding appropriate GL syncs. Which all oddly drops everything to a negligible FPS. Investigation will follow.
|
2016-03-19 22:46:17 -04:00 |
|
Thomas Harte
|
aa8a192c7e
|
Simplified API down to their being a single texture with a specified depth.
|
2016-03-19 17:37:55 -04:00 |
|
Thomas Harte
|
4ac1f959e9
|
A shortcut here and a shortcut there; this allows me at least to determine whether use of a PBO gains anything.
|
2016-03-19 17:07:05 -04:00 |
|
Thomas Harte
|
5b37a651ac
|
Made an attemp to deal with glUnmapBuffer(GL_ARRAY_BUFFER) == GL_FALSE.
|
2016-03-18 21:35:52 -04:00 |
|
Thomas Harte
|
0b1c9fb291
|
Ensured I don't interrupt triangle strips for the purpose of glDrawArrays.
|
2016-03-18 21:28:53 -04:00 |
|
Thomas Harte
|
620257e29e
|
Switched to a client wait, as I try to figure out what's going on.
|
2016-03-18 21:21:35 -04:00 |
|
Thomas Harte
|
2e4af90e2d
|
Resolved output errors.
|
2016-03-18 21:19:11 -04:00 |
|
Thomas Harte
|
10bc33464d
|
I don't think this is quite correct, but it's better.
|
2016-03-18 21:14:06 -04:00 |
|
Thomas Harte
|
61e880de03
|
Keeping a buffer permanently bound is apparently illegal. So back to copying in on demand. Which I think still improves on synchronisation, but not much.
|
2016-03-18 21:11:09 -04:00 |
|
Thomas Harte
|
c8ecfb89d8
|
Some cleaning.
|
2016-03-16 22:52:33 -04:00 |
|
Thomas Harte
|
0d27d3bb7f
|
As messy as it is, this use glMapBufferRange to avoid explicit buffer submits.
|
2016-03-16 22:29:22 -04:00 |
|
Thomas Harte
|
67dffc89e0
|
Stripped unnecessary includes.
|
2016-03-13 13:25:34 -04:00 |
|
Thomas Harte
|
7255408313
|
Experimented with going back to horizontal sync on leading edge; not sure so (temporarily?) disabled.
|
2016-03-08 22:54:05 -05:00 |
|
Thomas Harte
|
68da673a95
|
Wrapped this up as explicitly only the Mac thing to do.
|
2016-03-08 22:53:29 -05:00 |
|
Thomas Harte
|
bf5747f83e
|
Made an attempt to chop out all the stuff of building up the OpenGL data from the stuff of parsing input.
|
2016-03-08 22:40:23 -05:00 |
|
Thomas Harte
|
14b2927275
|
Made further attempts to tidy up; trying to demarcate between public interface and private.
|
2016-03-08 20:59:16 -05:00 |
|
Thomas Harte
|
c7976dd657
|
Started trying to clean up my Outputs namespace by moving stuff related to the CRT underneath a separate subnamespace.
|
2016-03-08 20:49:07 -05:00 |
|
Thomas Harte
|
bb09a5f58c
|
The attribute locations don't really need to be stored. They can be transient.
|
2016-03-07 21:42:21 -05:00 |
|
Thomas Harte
|
6dfe877c43
|
Basic attempts to organise myself into shape for composite output continue.
|
2016-03-07 21:22:47 -05:00 |
|
Thomas Harte
|
1e5fe2b2c1
|
Made an attempt to reestablish the Atari 2600 output connection despite various changes (TODO: generalise that stuff), and to start creating the composite shader.
|
2016-03-07 21:04:04 -05:00 |
|
Thomas Harte
|
2de229152f
|
Started sketching out shaders to do the first part of the composite conversion.
|
2016-03-07 19:21:04 -05:00 |
|
Thomas Harte
|
cd9c62acca
|
Still stepping slowly towards a working composite mode, switched the RGB sampling function to returning a vec4, which may be of benefit to any machine with a brightness part of an RGB signal, and started edging towards at least having the correct GLSL programs ready for converting composite output.
|
2016-03-07 19:08:26 -05:00 |
|
Thomas Harte
|
3b6c9c15a1
|
Switching momentarily back to monitor mode, resolved why I was suddenly getting no output upon creating some texture targets.
|
2016-03-07 18:55:15 -05:00 |
|
Thomas Harte
|
eefd17ed4c
|
Fixed sync response in composite scan output generation and stored texture coordinates.
|
2016-03-05 21:52:22 -05:00 |
|
Thomas Harte
|
6cddb4c9c8
|
Added a first attempt to generate output scans for composite mode. So this in theory completes the CPU side of composite operations. Though I'm sure problems will reveal themselves.
|
2016-03-05 21:18:28 -05:00 |
|
Thomas Harte
|
3f39803d32
|
Switched to triangle strips, to eliminate the need for any temporary storage for the composite output path.
|
2016-03-05 20:47:11 -05:00 |
|
Thomas Harte
|
23c223e2ed
|
Started edging towards completing the CPU side of accumulating enough data for composite decoding.
|
2016-03-05 17:55:18 -05:00 |
|
Thomas Harte
|
5c8db71c64
|
Corrected some constants, ensured both machines (so far) are setting the output device.
|
2016-03-05 16:19:10 -05:00 |
|
Thomas Harte
|
70b6d51451
|
Ever more baby steps back towards composite decoding.
|
2016-03-05 14:36:12 -05:00 |
|
Thomas Harte
|
2f7626a5e0
|
Okay, this definitely definitely is supposed to be this way around.
|
2016-02-28 22:00:05 -05:00 |
|
Thomas Harte
|
3449120c24
|
Added a note to future self, put the scan edge generator back to the way round it was before.
|
2016-02-27 22:51:37 -05:00 |
|
Thomas Harte
|
7839d93344
|
With the provision of an extra hint to the CRT and, finally, the realisation about why my scans weren't exactly joining up, improved output precision.
|
2016-02-27 22:39:01 -05:00 |
|
Thomas Harte
|
1c6de7692d
|
Made an attempt to fix tape output interrupts; offloaded raster width and placing conversion to the GPU.
|
2016-02-27 20:37:41 -05:00 |
|
Thomas Harte
|
db18c85423
|
Simplified the run builder rather; put a double check of Electron timing in place.
|
2016-02-25 22:01:42 -05:00 |
|
Thomas Harte
|
1eea28b692
|
Disabled some debugging parts, added some others, marked some things as inline. Ticking over.
|
2016-02-22 23:35:42 -05:00 |
|
Thomas Harte
|
4b28e7b974
|
Switched back to a single array and vertex buffer.
|
2016-02-21 22:54:55 -05:00 |
|
Thomas Harte
|
574985f9a2
|
Fixed interlaced timing; switched to a more robust detector for horizontal sync; eliminated some test logging.
|
2016-02-20 20:29:40 -05:00 |
|
Thomas Harte
|
00f414d757
|
Made an attempt to reintroduce interlacing and screen modes with gaps. Something's wrong with synchronisation though, so most likely I'm outputting a bad signal.
|
2016-02-20 17:32:51 -05:00 |
|
Thomas Harte
|
68992a62f9
|
Switched to a subtler to out-of-band syncs.
|
2016-02-20 00:16:07 -05:00 |
|
Thomas Harte
|
1954f7bcbd
|
Got back to a stable image, at least when staying in a mode. Which is what I was trying to fix. Hmmm.
|
2016-02-19 23:41:09 -05:00 |
|
Thomas Harte
|
570d88a876
|
Added a simple metric for measuring surprise. Which will hopefully allow me to reimplement PAL/NTSC auto-selection for the Atari 2600.
|
2016-02-18 23:22:06 -05:00 |
|
Thomas Harte
|
ce3c098c28
|
Widened beam a little, moved to a linear approximation of age across scans, cut number of stored frames.
|
2016-02-16 21:48:09 -05:00 |
|
Thomas Harte
|
b261e86c62
|
Reintroduced lateral as a parameter in CRT drawing, to simulate a rounded raster.
|
2016-02-16 20:37:04 -05:00 |
|
Thomas Harte
|
a01f90ff3e
|
Attempted a switch to the real PAL visible area and to something a bit like a real phosphor decay.
|
2016-02-14 21:57:23 -05:00 |
|
Thomas Harte
|
7580d192d5
|
Fixes: now setting correct frame time estimate, properly enabling the timestamp attribute, and ensuring that the Electron flushes screen work at least once per host frame update.
|
2016-02-14 19:28:02 -05:00 |
|
Thomas Harte
|
752db78431
|
No doubt still imperfect but killed the repeated whole texture uploads.
|
2016-02-13 23:55:02 -05:00 |
|
Thomas Harte
|
697e50c0cc
|
Screen output is back, no matter how inefficiently.
|
2016-02-13 23:50:18 -05:00 |
|
Thomas Harte
|
d0b2d840da
|
A minor fix to data queuing. Display still absent.
|
2016-02-13 20:57:41 -05:00 |
|
Thomas Harte
|
eeb0e134fd
|
Started the transition towards a more natural collection of rolling buffers, with phosphor decay in mind.
|
2016-02-13 20:52:23 -05:00 |
|
Thomas Harte
|
fd2d5c78f8
|
Started trying to nudge towards the multistage approach to video decoding.
|
2016-02-12 22:31:05 -05:00 |
|
Thomas Harte
|
0a09762be6
|
Fixed output precision compared to the new approach of trusting the flywheel for position, and eliminated fixed-Acorn constants. Also re-enabled the faded previous frame, at least temporarily.
|
2016-02-12 19:53:49 -05:00 |
|
Thomas Harte
|
1d20a29d97
|
Made an attempt to switch to the flywheels for both vertical and horizontal sync, and to act more appropriately for out-of-bounds sync requests. Lots of tweaking to do, I fear.
|
2016-02-11 23:43:08 -05:00 |
|
Thomas Harte
|
c81891ec43
|
Minor tidying and at least acknowledged the new flywheel encapsulation.
|
2016-02-11 22:13:38 -05:00 |
|
Thomas Harte
|
a6574d1f96
|
Made an attempt to factor out and more clearly to document my implementation of flywheel synchronisation.
|
2016-02-11 22:12:12 -05:00 |
|
Thomas Harte
|
c66409421e
|
Switched to generating an interlaced output, that apparently being correct. Enabled a poor man's version of phosphor persistence to smooth things out a little. It's not completely unconvincing.
|
2016-02-10 23:11:25 -05:00 |
|
Thomas Harte
|
b5bcadb8d3
|
Reinstated clipped CRT output, with more appropriate ownership of the decision.
|
2016-02-07 22:18:55 -05:00 |
|
Thomas Harte
|
3a689d14cc
|
Added padding of supplied data to correct for any potential rounding errors when rendering.
|
2016-02-07 20:29:32 -05:00 |
|
Thomas Harte
|
3a9ea66f8b
|
Filled in shader class.
|
2016-02-07 19:21:22 -05:00 |
|
Thomas Harte
|
4d0a218a57
|
Certainly at least seriously considering a separate holder for the "compile a shader" logic. Otherwise taking steps back towards PAL/NTSC decoding.
|
2016-02-07 17:32:38 -05:00 |
|
Thomas Harte
|
602327cd9d
|
Sketched out a quick class for rendering to texture.
|
2016-02-07 15:42:02 -05:00 |
|
thomasharte
|
2cb12a7513
|
Allowed overly aggressive allocations to be cleared up after the fact.
|
2016-02-06 16:07:23 -05:00 |
|
Thomas Harte
|
bf348ccb96
|
Fixed clearing logic.
|
2016-02-05 22:47:12 -05:00 |
|
Thomas Harte
|
6ab425deda
|
There is now a semi-reasonable amount of screen output again.
|
2016-02-05 21:35:39 -05:00 |
|
Thomas Harte
|
80e7e5e602
|
Updated to return old behaviour of drawing only upon changes.
|
2016-02-04 23:05:47 -05:00 |
|
Thomas Harte
|
8bc3f8046d
|
This endeavours to move everything into the CRT class except the final version of shader building.
|
2016-02-04 22:57:46 -05:00 |
|
Thomas Harte
|
e0d51408e4
|
Onward with carrying this through to the bitter end, this at least results in all the appropriate knowledge and call-ins occuring at the CRT.
|
2016-02-04 22:28:50 -05:00 |
|