2002-10-25 22:55:53 +00:00
|
|
|
//===-- X86InstructionInfo.def - X86 Instruction Information ----*- C++ -*-===//
|
|
|
|
//
|
|
|
|
// This file describes all of the instructions that the X86 backend uses. It
|
|
|
|
// relys on an external 'I' macro being defined that takes the arguments
|
|
|
|
// specified below, and is used to make all of the information relevant to an
|
|
|
|
// instruction be in one place.
|
|
|
|
//
|
2002-10-30 01:15:31 +00:00
|
|
|
// Note that X86 Instructions always have the destination register listed as
|
|
|
|
// operand 0, unless it does not produce a value (in which case the TSFlags will
|
|
|
|
// include X86II::Void).
|
|
|
|
//
|
2002-10-25 22:55:53 +00:00
|
|
|
//===----------------------------------------------------------------------===//
|
|
|
|
|
|
|
|
// NOTE: No include guards desired
|
|
|
|
|
|
|
|
#ifndef I
|
|
|
|
#errror "Must define I macro before including X86/X86InstructionInfo.def!"
|
|
|
|
#endif
|
|
|
|
|
2002-12-03 05:42:53 +00:00
|
|
|
// Macro to handle the implicit register uses lists...
|
|
|
|
#ifndef IMPREGSLIST
|
|
|
|
#define IMPREGSLIST(NAME, ...)
|
|
|
|
#endif
|
|
|
|
|
|
|
|
// Implicit register usage info: O_ is for one register, T_ is for two registers
|
Target/X86/Printer.cpp: Add sizePtr function, and use it instead of
" <SIZE> PTR " string when emitting assembly.
Target/X86/X86InstrInfo.def: Tidy up a bit:
Squashed everything down to 118 chars wide, wrapping lines so that
comment is at the same point on each line. Rename "NoImpRegs" as
"NoIR". (most instructions have NoImpRegs twice on a line, so this
saves 10 columns).
Also, annotate various instructions with flags for size of memory operand.
(MemArg16, MemArg32, MemArg64, etc.)
Target/X86/X86InstrInfo.h: Define flags for size of memory operand.
(MemArg16, MemArg32, MemArg64, etc.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@4932 91177308-0d34-0410-b5e6-96231b3b80d8
2002-12-05 08:30:40 +00:00
|
|
|
// NoIR means the instruction does not use implicit registers, in this form.
|
|
|
|
IMPREGSLIST(NoIR , 0)
|
|
|
|
IMPREGSLIST(O_AL , X86::AL , 0)
|
|
|
|
IMPREGSLIST(O_AH , X86::AH , 0)
|
|
|
|
IMPREGSLIST(O_CL , X86::CL , 0)
|
|
|
|
IMPREGSLIST(O_AX , X86::AX , 0)
|
|
|
|
IMPREGSLIST(O_DX , X86::DX , 0)
|
|
|
|
IMPREGSLIST(O_EAX, X86::EAX, 0)
|
|
|
|
IMPREGSLIST(O_EDX, X86::EDX, 0)
|
|
|
|
IMPREGSLIST(O_EBP, X86::EBP, 0)
|
|
|
|
IMPREGSLIST(T_AXDX , X86::AX , X86::DX , 0)
|
|
|
|
IMPREGSLIST(T_EAXEDX, X86::EAX, X86::EDX, 0)
|
2002-12-16 15:54:42 +00:00
|
|
|
IMPREGSLIST(C_CLOBBER, X86::EAX, X86::ECX, X86::EDX, 0) // Callee clobber regs
|
2002-12-03 05:42:53 +00:00
|
|
|
#undef IMPREGSLIST
|
|
|
|
|
|
|
|
|
2002-10-25 22:55:53 +00:00
|
|
|
// Arguments to be passed into the I macro
|
|
|
|
// #1: Enum name - This ends up being the opcode symbol in the X86 namespace
|
|
|
|
// #2: Opcode name, as used by the gnu assembler
|
2002-11-18 05:37:11 +00:00
|
|
|
// #3: The base opcode for the instruction
|
|
|
|
// #4: Instruction Flags - This should be a field or'd together that contains
|
2002-10-29 20:48:56 +00:00
|
|
|
// constants from the MachineInstrInfo.h file.
|
2002-11-18 05:37:11 +00:00
|
|
|
// #5: Target Specific Flags - Another bitfield containing X86 specific flags
|
2002-10-30 01:09:34 +00:00
|
|
|
// that we are interested in for each instruction. These should be flags
|
|
|
|
// defined in X86InstrInfo.h in the X86II namespace.
|
2002-12-03 05:42:53 +00:00
|
|
|
// #6: Name of the implicit register uses list
|
|
|
|
// #7: Name of the implicit register definitions list
|
2002-10-25 22:55:53 +00:00
|
|
|
//
|
|
|
|
|
2002-11-18 01:34:36 +00:00
|
|
|
// The first instruction must always be the PHI instruction:
|
Target/X86/Printer.cpp: Add sizePtr function, and use it instead of
" <SIZE> PTR " string when emitting assembly.
Target/X86/X86InstrInfo.def: Tidy up a bit:
Squashed everything down to 118 chars wide, wrapping lines so that
comment is at the same point on each line. Rename "NoImpRegs" as
"NoIR". (most instructions have NoImpRegs twice on a line, so this
saves 10 columns).
Also, annotate various instructions with flags for size of memory operand.
(MemArg16, MemArg32, MemArg64, etc.)
Target/X86/X86InstrInfo.h: Define flags for size of memory operand.
(MemArg16, MemArg32, MemArg64, etc.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@4932 91177308-0d34-0410-b5e6-96231b3b80d8
2002-12-05 08:30:40 +00:00
|
|
|
I(PHI , "phi", 0, 0, 0, NoIR, NoIR)
|
2002-10-25 22:55:53 +00:00
|
|
|
|
2002-11-18 01:34:36 +00:00
|
|
|
// The second instruction must always be the noop instruction:
|
Target/X86/Printer.cpp: Add sizePtr function, and use it instead of
" <SIZE> PTR " string when emitting assembly.
Target/X86/X86InstrInfo.def: Tidy up a bit:
Squashed everything down to 118 chars wide, wrapping lines so that
comment is at the same point on each line. Rename "NoImpRegs" as
"NoIR". (most instructions have NoImpRegs twice on a line, so this
saves 10 columns).
Also, annotate various instructions with flags for size of memory operand.
(MemArg16, MemArg32, MemArg64, etc.)
Target/X86/X86InstrInfo.h: Define flags for size of memory operand.
(MemArg16, MemArg32, MemArg64, etc.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@4932 91177308-0d34-0410-b5e6-96231b3b80d8
2002-12-05 08:30:40 +00:00
|
|
|
I(NOOP , "nop", 0x90, 0, X86II::RawFrm | X86II::Void, NoIR, NoIR) // nop
|
2002-10-25 22:55:53 +00:00
|
|
|
|
2002-11-02 19:27:56 +00:00
|
|
|
// Flow control instructions
|
Target/X86/Printer.cpp: Add sizePtr function, and use it instead of
" <SIZE> PTR " string when emitting assembly.
Target/X86/X86InstrInfo.def: Tidy up a bit:
Squashed everything down to 118 chars wide, wrapping lines so that
comment is at the same point on each line. Rename "NoImpRegs" as
"NoIR". (most instructions have NoImpRegs twice on a line, so this
saves 10 columns).
Also, annotate various instructions with flags for size of memory operand.
(MemArg16, MemArg32, MemArg64, etc.)
Target/X86/X86InstrInfo.h: Define flags for size of memory operand.
(MemArg16, MemArg32, MemArg64, etc.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@4932 91177308-0d34-0410-b5e6-96231b3b80d8
2002-12-05 08:30:40 +00:00
|
|
|
I(RET , "ret", 0xC3, M_RET_FLAG, X86II::RawFrm | X86II::Void, NoIR, NoIR) // ret
|
|
|
|
I(JMP , "jmp", 0xE9, M_BRANCH_FLAG, X86II::RawFrm | X86II::Void, NoIR, NoIR) // jmp foo
|
|
|
|
I(JNE , "jne", 0x85, M_BRANCH_FLAG, X86II::RawFrm | X86II::TB | X86II::Void, NoIR,
|
|
|
|
NoIR) // jne foo
|
|
|
|
I(JE , "je", 0x84, M_BRANCH_FLAG, X86II::RawFrm | X86II::TB | X86II::Void, NoIR,
|
|
|
|
NoIR) // je foo
|
|
|
|
I(CALLpcrel32 , "call", 0xE8, M_BRANCH_FLAG, X86II::Void, NoIR, NoIR) // call pc+42
|
2002-12-13 14:13:27 +00:00
|
|
|
I(CALLr32 , "call", 0xFF, M_BRANCH_FLAG, X86II::Void | X86II::MRMS2r | X86II::Arg32,
|
2002-12-16 15:54:42 +00:00
|
|
|
NoIR, C_CLOBBER) // call [r32]
|
2002-12-13 14:13:27 +00:00
|
|
|
I(CALLm32 , "call", 0xFF, M_BRANCH_FLAG, X86II::Void | X86II::MRMS2m | X86II::Arg32,
|
2002-12-16 15:54:42 +00:00
|
|
|
NoIR, C_CLOBBER) // call [m32]
|
2002-10-25 22:55:53 +00:00
|
|
|
|
2002-11-17 20:33:12 +00:00
|
|
|
// Misc instructions
|
Target/X86/Printer.cpp: Add sizePtr function, and use it instead of
" <SIZE> PTR " string when emitting assembly.
Target/X86/X86InstrInfo.def: Tidy up a bit:
Squashed everything down to 118 chars wide, wrapping lines so that
comment is at the same point on each line. Rename "NoImpRegs" as
"NoIR". (most instructions have NoImpRegs twice on a line, so this
saves 10 columns).
Also, annotate various instructions with flags for size of memory operand.
(MemArg16, MemArg32, MemArg64, etc.)
Target/X86/X86InstrInfo.h: Define flags for size of memory operand.
(MemArg16, MemArg32, MemArg64, etc.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@4932 91177308-0d34-0410-b5e6-96231b3b80d8
2002-12-05 08:30:40 +00:00
|
|
|
I(LEAVE , "leave", 0xC9, 0, X86II::RawFrm, O_EBP, O_EBP) // leave
|
2002-11-17 20:33:12 +00:00
|
|
|
|
2002-10-27 21:16:44 +00:00
|
|
|
// Move instructions
|
Target/X86/Printer.cpp: Add sizePtr function, and use it instead of
" <SIZE> PTR " string when emitting assembly.
Target/X86/X86InstrInfo.def: Tidy up a bit:
Squashed everything down to 118 chars wide, wrapping lines so that
comment is at the same point on each line. Rename "NoImpRegs" as
"NoIR". (most instructions have NoImpRegs twice on a line, so this
saves 10 columns).
Also, annotate various instructions with flags for size of memory operand.
(MemArg16, MemArg32, MemArg64, etc.)
Target/X86/X86InstrInfo.h: Define flags for size of memory operand.
(MemArg16, MemArg32, MemArg64, etc.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@4932 91177308-0d34-0410-b5e6-96231b3b80d8
2002-12-05 08:30:40 +00:00
|
|
|
I(MOVrr8 , "movb", 0x88, 0, X86II::MRMDestReg, NoIR, NoIR) // R8 = R8
|
|
|
|
I(MOVrr16 , "movw", 0x89, 0, X86II::MRMDestReg | X86II::OpSize, NoIR, NoIR) // R16 = R16
|
|
|
|
I(MOVrr32 , "movl", 0x89, 0, X86II::MRMDestReg, NoIR, NoIR) // R32 = R32
|
2002-12-13 03:51:55 +00:00
|
|
|
I(MOVir8 , "movb", 0xB0, 0, X86II::AddRegFrm | X86II::Arg8, NoIR, NoIR) // R8 = imm8
|
|
|
|
I(MOVir16 , "movw", 0xB8, 0, X86II::AddRegFrm | X86II::Arg16 | X86II::OpSize, NoIR, NoIR) // R16 = imm16
|
|
|
|
I(MOVir32 , "movl", 0xB8, 0, X86II::AddRegFrm | X86II::Arg32, NoIR, NoIR) // R32 = imm32
|
|
|
|
I(MOVmr8 , "movb", 0x8A, 0, X86II::MRMSrcMem | X86II::Arg8, NoIR, NoIR) // R8 = [mem]
|
Target/X86/Printer.cpp: Add sizePtr function, and use it instead of
" <SIZE> PTR " string when emitting assembly.
Target/X86/X86InstrInfo.def: Tidy up a bit:
Squashed everything down to 118 chars wide, wrapping lines so that
comment is at the same point on each line. Rename "NoImpRegs" as
"NoIR". (most instructions have NoImpRegs twice on a line, so this
saves 10 columns).
Also, annotate various instructions with flags for size of memory operand.
(MemArg16, MemArg32, MemArg64, etc.)
Target/X86/X86InstrInfo.h: Define flags for size of memory operand.
(MemArg16, MemArg32, MemArg64, etc.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@4932 91177308-0d34-0410-b5e6-96231b3b80d8
2002-12-05 08:30:40 +00:00
|
|
|
I(MOVmr16 , "movw", 0x8B, 0, X86II::MRMSrcMem | X86II::OpSize |
|
2002-12-13 03:51:55 +00:00
|
|
|
X86II::Arg16, NoIR, NoIR) // R16 = [mem]
|
2002-12-13 05:04:37 +00:00
|
|
|
I(MOVmr32 , "movl", 0x8B, 0, X86II::MRMSrcMem | X86II::Arg32, NoIR, NoIR)// R32 = [mem]
|
Target/X86/Printer.cpp: Add sizePtr function, and use it instead of
" <SIZE> PTR " string when emitting assembly.
Target/X86/X86InstrInfo.def: Tidy up a bit:
Squashed everything down to 118 chars wide, wrapping lines so that
comment is at the same point on each line. Rename "NoImpRegs" as
"NoIR". (most instructions have NoImpRegs twice on a line, so this
saves 10 columns).
Also, annotate various instructions with flags for size of memory operand.
(MemArg16, MemArg32, MemArg64, etc.)
Target/X86/X86InstrInfo.h: Define flags for size of memory operand.
(MemArg16, MemArg32, MemArg64, etc.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@4932 91177308-0d34-0410-b5e6-96231b3b80d8
2002-12-05 08:30:40 +00:00
|
|
|
I(MOVrm8 , "movb", 0x88, 0, X86II::MRMDestMem | X86II::Void |
|
2002-12-13 03:51:55 +00:00
|
|
|
X86II::Arg8, NoIR, NoIR) // [mem] = R8
|
Target/X86/Printer.cpp: Add sizePtr function, and use it instead of
" <SIZE> PTR " string when emitting assembly.
Target/X86/X86InstrInfo.def: Tidy up a bit:
Squashed everything down to 118 chars wide, wrapping lines so that
comment is at the same point on each line. Rename "NoImpRegs" as
"NoIR". (most instructions have NoImpRegs twice on a line, so this
saves 10 columns).
Also, annotate various instructions with flags for size of memory operand.
(MemArg16, MemArg32, MemArg64, etc.)
Target/X86/X86InstrInfo.h: Define flags for size of memory operand.
(MemArg16, MemArg32, MemArg64, etc.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@4932 91177308-0d34-0410-b5e6-96231b3b80d8
2002-12-05 08:30:40 +00:00
|
|
|
I(MOVrm16 , "movw", 0x89, 0, X86II::MRMDestMem | X86II::Void |
|
2002-12-13 03:51:55 +00:00
|
|
|
X86II::OpSize | X86II::Arg16, NoIR, NoIR) // [mem] = R16
|
Target/X86/Printer.cpp: Add sizePtr function, and use it instead of
" <SIZE> PTR " string when emitting assembly.
Target/X86/X86InstrInfo.def: Tidy up a bit:
Squashed everything down to 118 chars wide, wrapping lines so that
comment is at the same point on each line. Rename "NoImpRegs" as
"NoIR". (most instructions have NoImpRegs twice on a line, so this
saves 10 columns).
Also, annotate various instructions with flags for size of memory operand.
(MemArg16, MemArg32, MemArg64, etc.)
Target/X86/X86InstrInfo.h: Define flags for size of memory operand.
(MemArg16, MemArg32, MemArg64, etc.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@4932 91177308-0d34-0410-b5e6-96231b3b80d8
2002-12-05 08:30:40 +00:00
|
|
|
I(MOVrm32 , "movl", 0x89, 0, X86II::MRMDestMem | X86II::Void |
|
2002-12-13 03:51:55 +00:00
|
|
|
X86II::Arg32, NoIR, NoIR) // [mem] = R32
|
Target/X86/Printer.cpp: Add sizePtr function, and use it instead of
" <SIZE> PTR " string when emitting assembly.
Target/X86/X86InstrInfo.def: Tidy up a bit:
Squashed everything down to 118 chars wide, wrapping lines so that
comment is at the same point on each line. Rename "NoImpRegs" as
"NoIR". (most instructions have NoImpRegs twice on a line, so this
saves 10 columns).
Also, annotate various instructions with flags for size of memory operand.
(MemArg16, MemArg32, MemArg64, etc.)
Target/X86/X86InstrInfo.h: Define flags for size of memory operand.
(MemArg16, MemArg32, MemArg64, etc.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@4932 91177308-0d34-0410-b5e6-96231b3b80d8
2002-12-05 08:30:40 +00:00
|
|
|
|
|
|
|
I(PUSHr32 , "pushl", 0x50, 0, X86II::AddRegFrm | X86II::Void, NoIR, NoIR)
|
|
|
|
I(POPr32 , "popl", 0x58, 0, X86II::AddRegFrm, NoIR, NoIR)
|
2002-11-29 12:01:58 +00:00
|
|
|
|
2002-10-27 21:16:44 +00:00
|
|
|
// Arithmetic instructions
|
2002-12-12 23:19:11 +00:00
|
|
|
I(ADDrr8 , "addb", 0x00, M_2_ADDR_FLAG, X86II::MRMDestReg, NoIR, NoIR) // R8 += R8
|
|
|
|
I(ADDrr16 , "addw", 0x01, M_2_ADDR_FLAG, X86II::MRMDestReg | X86II::OpSize, NoIR, NoIR) // R16 += R16
|
|
|
|
I(ADDrr32 , "addl", 0x01, M_2_ADDR_FLAG, X86II::MRMDestReg, NoIR, NoIR) // R32 += R32
|
2002-12-13 03:51:55 +00:00
|
|
|
I(ADDri32 , "add", 0x81, M_2_ADDR_FLAG, X86II::MRMS0r | X86II::Arg32, NoIR, NoIR) // R32 += imm32
|
2002-12-12 23:19:11 +00:00
|
|
|
I(SUBrr8 , "subb", 0x2A, M_2_ADDR_FLAG, X86II::MRMDestReg, NoIR, NoIR) // R8 -= R8
|
|
|
|
I(SUBrr16 , "subw", 0x2B, M_2_ADDR_FLAG, X86II::MRMDestReg | X86II::OpSize, NoIR, NoIR) // R16 -= R16
|
|
|
|
I(SUBrr32 , "subl", 0x2B, M_2_ADDR_FLAG, X86II::MRMDestReg, NoIR, NoIR) // R32 -= R32
|
2002-12-13 03:51:55 +00:00
|
|
|
I(SUBri32 , "sub", 0x81, M_2_ADDR_FLAG, X86II::MRMS5r | X86II::Arg32, NoIR, NoIR) // R32 -= imm32
|
Target/X86/Printer.cpp: Add sizePtr function, and use it instead of
" <SIZE> PTR " string when emitting assembly.
Target/X86/X86InstrInfo.def: Tidy up a bit:
Squashed everything down to 118 chars wide, wrapping lines so that
comment is at the same point on each line. Rename "NoImpRegs" as
"NoIR". (most instructions have NoImpRegs twice on a line, so this
saves 10 columns).
Also, annotate various instructions with flags for size of memory operand.
(MemArg16, MemArg32, MemArg64, etc.)
Target/X86/X86InstrInfo.h: Define flags for size of memory operand.
(MemArg16, MemArg32, MemArg64, etc.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@4932 91177308-0d34-0410-b5e6-96231b3b80d8
2002-12-05 08:30:40 +00:00
|
|
|
I(MULrr8 , "mulb", 0xF6, 0, X86II::MRMS4r | X86II::Void, O_AL, O_AX) // AX = AL*R8
|
|
|
|
I(MULrr16 , "mulw", 0xF7, 0, X86II::MRMS4r | X86II::Void | // DX:AX= AX*R16
|
2002-12-03 05:42:53 +00:00
|
|
|
X86II::OpSize, O_AX, T_AXDX)
|
Target/X86/Printer.cpp: Add sizePtr function, and use it instead of
" <SIZE> PTR " string when emitting assembly.
Target/X86/X86InstrInfo.def: Tidy up a bit:
Squashed everything down to 118 chars wide, wrapping lines so that
comment is at the same point on each line. Rename "NoImpRegs" as
"NoIR". (most instructions have NoImpRegs twice on a line, so this
saves 10 columns).
Also, annotate various instructions with flags for size of memory operand.
(MemArg16, MemArg32, MemArg64, etc.)
Target/X86/X86InstrInfo.h: Define flags for size of memory operand.
(MemArg16, MemArg32, MemArg64, etc.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@4932 91177308-0d34-0410-b5e6-96231b3b80d8
2002-12-05 08:30:40 +00:00
|
|
|
I(MULrr32 , "mull", 0xF7, 0, X86II::MRMS4r | X86II::Void, O_EAX, T_EAXEDX) // ED:EA= EA*R32
|
2002-11-02 20:28:58 +00:00
|
|
|
|
2002-11-02 20:54:46 +00:00
|
|
|
// unsigned division/remainder
|
Target/X86/Printer.cpp: Add sizePtr function, and use it instead of
" <SIZE> PTR " string when emitting assembly.
Target/X86/X86InstrInfo.def: Tidy up a bit:
Squashed everything down to 118 chars wide, wrapping lines so that
comment is at the same point on each line. Rename "NoImpRegs" as
"NoIR". (most instructions have NoImpRegs twice on a line, so this
saves 10 columns).
Also, annotate various instructions with flags for size of memory operand.
(MemArg16, MemArg32, MemArg64, etc.)
Target/X86/X86InstrInfo.h: Define flags for size of memory operand.
(MemArg16, MemArg32, MemArg64, etc.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@4932 91177308-0d34-0410-b5e6-96231b3b80d8
2002-12-05 08:30:40 +00:00
|
|
|
I(DIVrr8 , "divb", 0xF6, 0, X86II::MRMS6r | X86II::Void, O_AX, O_AX) // AX/r8= AL&AH
|
|
|
|
I(DIVrr16 , "divw", 0xF7, 0, X86II::MRMS6r | X86II::Void | // ED:EA/r16=AX&DX
|
2002-12-03 05:42:53 +00:00
|
|
|
X86II::OpSize, T_AXDX, T_AXDX)
|
Target/X86/Printer.cpp: Add sizePtr function, and use it instead of
" <SIZE> PTR " string when emitting assembly.
Target/X86/X86InstrInfo.def: Tidy up a bit:
Squashed everything down to 118 chars wide, wrapping lines so that
comment is at the same point on each line. Rename "NoImpRegs" as
"NoIR". (most instructions have NoImpRegs twice on a line, so this
saves 10 columns).
Also, annotate various instructions with flags for size of memory operand.
(MemArg16, MemArg32, MemArg64, etc.)
Target/X86/X86InstrInfo.h: Define flags for size of memory operand.
(MemArg16, MemArg32, MemArg64, etc.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@4932 91177308-0d34-0410-b5e6-96231b3b80d8
2002-12-05 08:30:40 +00:00
|
|
|
I(DIVrr32 , "divl", 0xF7, 0, X86II::MRMS6r | X86II::Void, T_EAXEDX,
|
|
|
|
T_EAXEDX) // ED:EA/r32=EA&ED
|
2002-11-02 20:54:46 +00:00
|
|
|
|
|
|
|
// signed division/remainder
|
Target/X86/Printer.cpp: Add sizePtr function, and use it instead of
" <SIZE> PTR " string when emitting assembly.
Target/X86/X86InstrInfo.def: Tidy up a bit:
Squashed everything down to 118 chars wide, wrapping lines so that
comment is at the same point on each line. Rename "NoImpRegs" as
"NoIR". (most instructions have NoImpRegs twice on a line, so this
saves 10 columns).
Also, annotate various instructions with flags for size of memory operand.
(MemArg16, MemArg32, MemArg64, etc.)
Target/X86/X86InstrInfo.h: Define flags for size of memory operand.
(MemArg16, MemArg32, MemArg64, etc.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@4932 91177308-0d34-0410-b5e6-96231b3b80d8
2002-12-05 08:30:40 +00:00
|
|
|
I(IDIVrr8 , "idivb", 0xF6, 0, X86II::MRMS7r | X86II::Void, O_AX, O_AX) // AX/r8= AL&AH
|
|
|
|
I(IDIVrr16 , "idivw", 0xF7, 0, X86II::MRMS7r | X86II::Void | // DA/r16=AX&DX
|
2002-12-03 05:42:53 +00:00
|
|
|
X86II::OpSize, T_AXDX, T_AXDX)
|
Target/X86/Printer.cpp: Add sizePtr function, and use it instead of
" <SIZE> PTR " string when emitting assembly.
Target/X86/X86InstrInfo.def: Tidy up a bit:
Squashed everything down to 118 chars wide, wrapping lines so that
comment is at the same point on each line. Rename "NoImpRegs" as
"NoIR". (most instructions have NoImpRegs twice on a line, so this
saves 10 columns).
Also, annotate various instructions with flags for size of memory operand.
(MemArg16, MemArg32, MemArg64, etc.)
Target/X86/X86InstrInfo.h: Define flags for size of memory operand.
(MemArg16, MemArg32, MemArg64, etc.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@4932 91177308-0d34-0410-b5e6-96231b3b80d8
2002-12-05 08:30:40 +00:00
|
|
|
I(IDIVrr32 , "idivl", 0xF7, 0, X86II::MRMS7r | X86II::Void, T_EAXEDX,
|
|
|
|
T_EAXEDX) // DA/r32=EAX&DX
|
2002-11-02 20:54:46 +00:00
|
|
|
|
2002-11-02 20:04:26 +00:00
|
|
|
// Logical operators
|
2002-12-12 23:19:11 +00:00
|
|
|
I(ANDrr8 , "andb", 0x20, M_2_ADDR_FLAG, X86II::MRMDestReg, NoIR, NoIR) // R8 &= R8
|
|
|
|
I(ANDrr16 , "andw", 0x21, M_2_ADDR_FLAG, X86II::MRMDestReg | X86II::OpSize, NoIR, NoIR) // R16 &= R16
|
|
|
|
I(ANDrr32 , "andl", 0x21, M_2_ADDR_FLAG, X86II::MRMDestReg, NoIR, NoIR) // R32 &= R32
|
|
|
|
I(ORrr8 , "orb", 0x08, M_2_ADDR_FLAG, X86II::MRMDestReg, NoIR, NoIR) // R8 |= R8
|
|
|
|
I(ORrr16 , "orw", 0x09, M_2_ADDR_FLAG, X86II::MRMDestReg | X86II::OpSize, NoIR, NoIR) // R16 |= R16
|
|
|
|
I(ORrr32 , "orl", 0x09, M_2_ADDR_FLAG, X86II::MRMDestReg, NoIR, NoIR) // R32 |= R32
|
|
|
|
I(XORrr8 , "xorb", 0x30, M_2_ADDR_FLAG, X86II::MRMDestReg, NoIR, NoIR) // R8 ^= R8
|
|
|
|
I(XORrr16 , "xorw", 0x31, M_2_ADDR_FLAG, X86II::MRMDestReg | X86II::OpSize, NoIR, NoIR) // R16 ^= R16
|
|
|
|
I(XORrr32 , "xorl", 0x31, M_2_ADDR_FLAG, X86II::MRMDestReg, NoIR, NoIR) // R32 ^= R32
|
2002-10-25 22:55:53 +00:00
|
|
|
|
2002-10-31 23:03:59 +00:00
|
|
|
// Shift instructions
|
2002-12-12 23:19:11 +00:00
|
|
|
I(SHLrr8 , "shlb", 0xD2, M_2_ADDR_FLAG, X86II::MRMS4r, O_CL, NoIR) // R8 <<= cl
|
|
|
|
I(SHLrr16 , "shlw", 0xD3, M_2_ADDR_FLAG, X86II::MRMS4r | X86II::OpSize, O_CL, NoIR) // R16 <<= cl
|
|
|
|
I(SHLrr32 , "shll", 0xD3, M_2_ADDR_FLAG, X86II::MRMS4r, O_CL, NoIR) // R32 <<= cl
|
2002-12-13 03:51:55 +00:00
|
|
|
I(SHLir8 , "shlb", 0xC0, M_2_ADDR_FLAG, X86II::MRMS4r | X86II::Arg8, NoIR, NoIR) // R8 <<= imm8
|
|
|
|
I(SHLir16 , "shlw", 0xC1, M_2_ADDR_FLAG, X86II::MRMS4r | X86II::Arg8 | X86II::OpSize, NoIR, NoIR) // R16 <<= imm8
|
|
|
|
I(SHLir32 , "shll", 0xC1, M_2_ADDR_FLAG, X86II::MRMS4r | X86II::Arg8, NoIR, NoIR) // R32 <<= imm8
|
2002-12-12 23:19:11 +00:00
|
|
|
I(SHRrr8 , "shrb", 0xD2, M_2_ADDR_FLAG, X86II::MRMS5r, O_CL, NoIR) // R8 >>>= cl
|
|
|
|
I(SHRrr16 , "shrw", 0xD3, M_2_ADDR_FLAG, X86II::MRMS5r | X86II::OpSize, O_CL, NoIR) // R16 >>>= cl
|
|
|
|
I(SHRrr32 , "shrl", 0xD3, M_2_ADDR_FLAG, X86II::MRMS5r, O_CL, NoIR) // R32 >>>= cl
|
2002-12-13 03:51:55 +00:00
|
|
|
I(SHRir8 , "shrb", 0xC0, M_2_ADDR_FLAG, X86II::MRMS5r | X86II::Arg8, NoIR, NoIR) // R8 >>>= imm8
|
|
|
|
I(SHRir16 , "shrw", 0xC1, M_2_ADDR_FLAG, X86II::MRMS5r | X86II::Arg8 | X86II::OpSize, NoIR, NoIR) // R16 >>>= imm8
|
|
|
|
I(SHRir32 , "shrl", 0xC1, M_2_ADDR_FLAG, X86II::MRMS5r | X86II::Arg8, NoIR, NoIR) // R32 >>>= imm8
|
2002-12-12 23:19:11 +00:00
|
|
|
I(SARrr8 , "sarb", 0xD2, M_2_ADDR_FLAG, X86II::MRMS7r, O_CL, NoIR) // R8 >>= cl
|
|
|
|
I(SARrr16 , "sarw", 0xD3, M_2_ADDR_FLAG, X86II::MRMS7r | X86II::OpSize, O_CL, NoIR) // R16 >>= cl
|
|
|
|
I(SARrr32 , "sarl", 0xD3, M_2_ADDR_FLAG, X86II::MRMS7r, O_CL, NoIR) // R32 >>= cl
|
2002-12-13 03:51:55 +00:00
|
|
|
I(SARir8 , "sarb", 0xC0, M_2_ADDR_FLAG, X86II::MRMS7r | X86II::Arg8, NoIR, NoIR) // R8 >>= imm8
|
|
|
|
I(SARir16 , "sarw", 0xC1, M_2_ADDR_FLAG, X86II::MRMS7r | X86II::Arg8 | X86II::OpSize, NoIR, NoIR) // R16 >>= imm8
|
|
|
|
I(SARir32 , "sarl", 0xC1, M_2_ADDR_FLAG, X86II::MRMS7r | X86II::Arg8, NoIR, NoIR) // R32 >>= imm8
|
2002-10-25 22:55:53 +00:00
|
|
|
|
2002-11-07 17:59:21 +00:00
|
|
|
// Floating point loads
|
This checkin is brought to you by the brian gaeke allnighter fund.
(lib/Target/X86) InstSelectSimple.cpp:
Include llvm/DerivedTypes.h and iostream.
Refactor visitMul out into a wrapper around doMultiply(), so that we
can do multiplications on temporary values when we are doing
getelementptrs.
Refactor part of getReg out into makeAnotherReg, so that we can create
registers willy-nilly to hold temporary values, when we are doing
getelementptrs.
Add stub implementations of visitMallocInst and visitAllocaInst.
Add initial implementation of visitGetElementPtrInst.
In copyConstantToRegister:
We throw a *lot* of our asserts here. So, when we want to throw an
assert, print out to stderr whatever expr or whatever constant made
us barf.
Support copying ConstantPointerNull to register, using a move immediate
of zero.
Rename FLDr4 and FLDr8 to FLDr32 and FLDr64, so that they match the meanings
of the numbers in the other instruction names. All uses modified.
Teach visitCallInst to extract byte- and short-class return values
from subregs of EAX. Add a FIXME note about how we would do it for
float-class return values.
Add a FIXME note about how we would cast float to int and back.
X86InstrInfo.def:
Rename FLDr4 and FLDr8 to FLDr32 and FLDr64, so that they match the meanings
of the numbers in the other instruction names. All uses modified.
(tools/jello) GlobalVars.cpp:
Include iostream.
If we have to emit a floating-point constant to memory, gamble and use
the same method as for ints.
If we have to emit a ConstantPointerNull to memory, try using a "void *"
and "NULL".
Otherwise, if we are going to throw an assert, print out whatever constant
made us barf, first.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@4973 91177308-0d34-0410-b5e6-96231b3b80d8
2002-12-12 15:33:40 +00:00
|
|
|
I(FLDr32 , "flds", 0xD9, 0, X86II::MRMS0m, NoIR, NoIR) // push float
|
|
|
|
I(FLDr64 , "fldl", 0xDD, 0, X86II::MRMS0m, NoIR, NoIR) // push double
|
2002-11-07 17:59:21 +00:00
|
|
|
|
|
|
|
// Floating point compares
|
Target/X86/Printer.cpp: Add sizePtr function, and use it instead of
" <SIZE> PTR " string when emitting assembly.
Target/X86/X86InstrInfo.def: Tidy up a bit:
Squashed everything down to 118 chars wide, wrapping lines so that
comment is at the same point on each line. Rename "NoImpRegs" as
"NoIR". (most instructions have NoImpRegs twice on a line, so this
saves 10 columns).
Also, annotate various instructions with flags for size of memory operand.
(MemArg16, MemArg32, MemArg64, etc.)
Target/X86/X86InstrInfo.h: Define flags for size of memory operand.
(MemArg16, MemArg32, MemArg64, etc.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@4932 91177308-0d34-0410-b5e6-96231b3b80d8
2002-12-05 08:30:40 +00:00
|
|
|
I(FUCOMPP , "fucompp", 0xDA, 0, X86II::Void, NoIR, NoIR) // compare+pop2x
|
2002-11-07 17:59:21 +00:00
|
|
|
|
|
|
|
// Floating point flag ops
|
Target/X86/Printer.cpp: Add sizePtr function, and use it instead of
" <SIZE> PTR " string when emitting assembly.
Target/X86/X86InstrInfo.def: Tidy up a bit:
Squashed everything down to 118 chars wide, wrapping lines so that
comment is at the same point on each line. Rename "NoImpRegs" as
"NoIR". (most instructions have NoImpRegs twice on a line, so this
saves 10 columns).
Also, annotate various instructions with flags for size of memory operand.
(MemArg16, MemArg32, MemArg64, etc.)
Target/X86/X86InstrInfo.h: Define flags for size of memory operand.
(MemArg16, MemArg32, MemArg64, etc.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@4932 91177308-0d34-0410-b5e6-96231b3b80d8
2002-12-05 08:30:40 +00:00
|
|
|
I(FNSTSWr8 , "fnstsw", 0xDF, 0, X86II::Void, NoIR, O_AX) // AX = fp flags
|
2002-11-07 17:59:21 +00:00
|
|
|
|
|
|
|
// Condition code ops, incl. set if equal/not equal/...
|
Target/X86/Printer.cpp: Add sizePtr function, and use it instead of
" <SIZE> PTR " string when emitting assembly.
Target/X86/X86InstrInfo.def: Tidy up a bit:
Squashed everything down to 118 chars wide, wrapping lines so that
comment is at the same point on each line. Rename "NoImpRegs" as
"NoIR". (most instructions have NoImpRegs twice on a line, so this
saves 10 columns).
Also, annotate various instructions with flags for size of memory operand.
(MemArg16, MemArg32, MemArg64, etc.)
Target/X86/X86InstrInfo.h: Define flags for size of memory operand.
(MemArg16, MemArg32, MemArg64, etc.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@4932 91177308-0d34-0410-b5e6-96231b3b80d8
2002-12-05 08:30:40 +00:00
|
|
|
I(SAHF , "sahf", 0x9E, 0, X86II::RawFrm, O_AH, NoIR) // flags = AH
|
|
|
|
I(SETBr , "setb", 0x92, 0, X86II::TB | X86II::MRMS0r, NoIR, NoIR) // R8 = < unsign
|
|
|
|
I(SETAEr , "setae", 0x93, 0, X86II::TB | X86II::MRMS0r, NoIR, NoIR) // R8 = >=unsign
|
|
|
|
I(SETEr , "sete", 0x94, 0, X86II::TB | X86II::MRMS0r, NoIR, NoIR) // R8 = ==
|
|
|
|
I(SETNEr , "setne", 0x95, 0, X86II::TB | X86II::MRMS0r, NoIR, NoIR) // R8 = !=
|
|
|
|
I(SETBEr , "setbe", 0x96, 0, X86II::TB | X86II::MRMS0r, NoIR, NoIR) // R8 = <=unsign
|
|
|
|
I(SETAr , "seta", 0x97, 0, X86II::TB | X86II::MRMS0r, NoIR, NoIR) // R8 = > unsign
|
|
|
|
I(SETLr , "setl", 0x9C, 0, X86II::TB | X86II::MRMS0r, NoIR, NoIR) // R8 = < signed
|
|
|
|
I(SETGEr , "setge", 0x9D, 0, X86II::TB | X86II::MRMS0r, NoIR, NoIR) // R8 = >=signed
|
|
|
|
I(SETLEr , "setle", 0x9E, 0, X86II::TB | X86II::MRMS0r, NoIR, NoIR) // R8 = <=signed
|
|
|
|
I(SETGr , "setg", 0x9F, 0, X86II::TB | X86II::MRMS0r, NoIR, NoIR) // R8 = > signed
|
2002-11-07 17:59:21 +00:00
|
|
|
|
|
|
|
// Integer comparisons
|
Target/X86/Printer.cpp: Add sizePtr function, and use it instead of
" <SIZE> PTR " string when emitting assembly.
Target/X86/X86InstrInfo.def: Tidy up a bit:
Squashed everything down to 118 chars wide, wrapping lines so that
comment is at the same point on each line. Rename "NoImpRegs" as
"NoIR". (most instructions have NoImpRegs twice on a line, so this
saves 10 columns).
Also, annotate various instructions with flags for size of memory operand.
(MemArg16, MemArg32, MemArg64, etc.)
Target/X86/X86InstrInfo.h: Define flags for size of memory operand.
(MemArg16, MemArg32, MemArg64, etc.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@4932 91177308-0d34-0410-b5e6-96231b3b80d8
2002-12-05 08:30:40 +00:00
|
|
|
I(CMPrr8 , "cmpb", 0x38, 0, X86II::MRMDestReg, NoIR, NoIR) // compare R8,R8
|
|
|
|
I(CMPrr16 , "cmpw", 0x39, 0, X86II::MRMDestReg | X86II::OpSize, NoIR, NoIR) // compare R16,R16
|
|
|
|
I(CMPrr32 , "cmpl", 0x39, 0, X86II::MRMDestReg, NoIR, NoIR) // compare R32,R32
|
2002-12-13 03:51:55 +00:00
|
|
|
I(CMPri8 , "cmp", 0x80, 0, X86II::MRMS7r | X86II::Arg8, NoIR, NoIR) // compare R8, imm8
|
2002-11-07 17:59:21 +00:00
|
|
|
|
2002-11-14 22:32:30 +00:00
|
|
|
// Sign extenders (first 3 are good for DIV/IDIV; the others are more general)
|
2002-12-13 04:41:31 +00:00
|
|
|
I(CBW , "cbw", 0x98, 0, X86II::RawFrm | X86II::OpSize, O_AL, O_AX) // AX = signext(AL)
|
Target/X86/Printer.cpp: Add sizePtr function, and use it instead of
" <SIZE> PTR " string when emitting assembly.
Target/X86/X86InstrInfo.def: Tidy up a bit:
Squashed everything down to 118 chars wide, wrapping lines so that
comment is at the same point on each line. Rename "NoImpRegs" as
"NoIR". (most instructions have NoImpRegs twice on a line, so this
saves 10 columns).
Also, annotate various instructions with flags for size of memory operand.
(MemArg16, MemArg32, MemArg64, etc.)
Target/X86/X86InstrInfo.h: Define flags for size of memory operand.
(MemArg16, MemArg32, MemArg64, etc.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@4932 91177308-0d34-0410-b5e6-96231b3b80d8
2002-12-05 08:30:40 +00:00
|
|
|
I(CWD , "cwd", 0x99, 0, X86II::RawFrm, O_AX, O_DX) // DX:AX = signext(AX)
|
|
|
|
I(CDQ , "cdq", 0x99, 0, X86II::RawFrm, O_EAX, O_EDX) // EDX:EAX = signext(EAX)
|
|
|
|
I(MOVSXr16r8 , "movsx", 0xBE, 0, X86II::MRMSrcReg | X86II::TB | // R16 = signext(R8)
|
|
|
|
X86II::OpSize, NoIR, NoIR)
|
|
|
|
I(MOVSXr32r8 , "movsx", 0xBE, 0, X86II::MRMSrcReg | X86II::TB, NoIR, NoIR) // R32 = signext(R8)
|
|
|
|
I(MOVSXr32r16 , "movsx", 0xBF, 0, X86II::MRMSrcReg | X86II::TB, NoIR, NoIR) // R32 = signext(R16)
|
|
|
|
I(MOVZXr16r8 , "movzx", 0xB6, 0, X86II::MRMSrcReg | X86II::TB | // R16 = zeroext(R8)
|
|
|
|
X86II::OpSize, NoIR, NoIR)
|
|
|
|
I(MOVZXr32r8 , "movzx", 0xB6, 0, X86II::MRMSrcReg | X86II::TB, NoIR, NoIR) // R32 = zeroext(R8)
|
|
|
|
I(MOVZXr32r16 , "movzx", 0xB7, 0, X86II::MRMSrcReg | X86II::TB, NoIR, NoIR) // R32 = zeroext(R16)
|
2002-11-02 20:54:46 +00:00
|
|
|
|
2002-10-30 01:09:34 +00:00
|
|
|
// At this point, I is dead, so undefine the macro
|
2002-10-25 22:55:53 +00:00
|
|
|
#undef I
|