DAGCombiner::CombineToPreIndexedLoadStore calls a target routine to
decompose a memory address into a base/offset pair. It expects the
offset (if constant) to be the true displacement value in order to
perform optional additional optimizations; in particular, to convert
other uses of the original pointer into uses of the new base pointer
after pre-increment.
The PowerPC implementation of getPreIndexedAddressParts, however,
simply calls SelectAddressRegImm, which returns a TargetConstant.
This value is appropriate for encoding into the instruction, but
it is not always usable as true displacement value:
- Its type is always MVT::i32, even on 64-bit, where addresses
ought to be i64 ... this causes the optimization to simply
always fail on 64-bit due to this line in DAGCombiner:
// FIXME: In some cases, we can be smarter about this.
if (Op1.getValueType() != Offset.getValueType()) {
- Its value is truncated to an unsigned 16-bit value if negative.
This causes the above opimization to generate wrong code.
This patch fixes both problems by simply returning the true
displacement value (in its original type). This doesn't
affect any other user of the displacement.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182012 91177308-0d34-0410-b5e6-96231b3b80d8
getExceptionHandlingType is not ExceptionHandling::DwarfCFI on xcore, so
etFrameInstructions is never called. There is no point creating cfi
instructions if they are never used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181979 91177308-0d34-0410-b5e6-96231b3b80d8
Without this change nothing was covering this addFrameMove:
// For 64-bit SVR4 when we have spilled CRs, the spill location
// is SP+8, not a frame-relative slot.
if (Subtarget.isSVR4ABI()
&& Subtarget.isPPC64()
&& (PPC::CR2 <= Reg && Reg <= PPC::CR4)) {
MachineLocation CSDst(PPC::X1, 8);
MachineLocation CSSrc(PPC::CR2);
MMI.addFrameMove(Label, CSDst, CSSrc);
continue;
}
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181976 91177308-0d34-0410-b5e6-96231b3b80d8
This creates stubs that help Mips32 functions call Mips16
functions which have floating point parameters that are normally passed
in floating point registers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181972 91177308-0d34-0410-b5e6-96231b3b80d8
We only want to check this once, not for every conditional block in the loop.
No functionality change (except that we don't perform a check redudantly
anymore).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181942 91177308-0d34-0410-b5e6-96231b3b80d8
Increase the number of instructions LLVM recognizes as setting the ZF
flag. This allows us to remove test instructions that redundantly
recalculate the flag.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181937 91177308-0d34-0410-b5e6-96231b3b80d8
The old PPCCTRLoops pass, like the Hexagon pass version from which it was
derived, could only handle some simple loops in canonical form. We cannot
directly adapt the new Hexagon hardware loops pass, however, because the
Hexagon pass contains a fundamental assumption that non-constant-trip-count
loops will contain a guard, and this is not always true (the result being that
incorrect negative counts can be generated). With this commit, we replace the
pass with a late IR-level pass which makes use of SE to calculate the
backedge-taken counts and safely generate the loop-count expressions (including
any necessary max() parts). This IR level pass inserts custom intrinsics that
are lowered into the desired decrement-and-branch instructions.
The most fragile part of this new implementation is that interfering uses of
the counter register must be detected on the IR level (and, on PPC, this also
includes any indirect branches in addition to function calls). Also, to make
all of this work, we need a variant of the mtctr instruction that is marked
as having side effects. Without this, machine-code level CSE, DCE, etc.
illegally transform the resulting code. Hopefully, this can be improved
in the future.
This new pass is smaller than the original (and much smaller than the new
Hexagon hardware loops pass), and can handle many additional cases correctly.
In addition, the preheader-creation code has been copied from LoopSimplify, and
after we decide on where it belongs, this code will be refactored so that it
can be explicitly shared (making this implementation even smaller).
The new test-case files ctrloop-{le,lt,ne}.ll have been adapted from tests for
the new Hexagon pass. There are a few classes of loops that this pass does not
transform (noted by FIXMEs in the files), but these deficiencies can be
addressed within the SE infrastructure (thus helping many other passes as well).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181927 91177308-0d34-0410-b5e6-96231b3b80d8
If the input operands to SETCC are promoted, we need to make sure that we
either use the promoted form of both operands (or neither); a mixture is not
allowed. This can happen, for example, if a target has a custom promoted
i1-returning intrinsic (where i1 is not a legal type). In this case, we need to
use the promoted form of both operands.
This change only augments the behavior of the existing logic in the case where
the input types (which may or may not have already been legalized) disagree,
and should not affect existing target code because this case would otherwise
cause an assert in the SETCC operand promotion code.
This will be covered by (essentially all of the) tests for the new PPCCTRLoops
infrastructure.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181926 91177308-0d34-0410-b5e6-96231b3b80d8
IR optimisation passes can result in a basic block that contains:
llvm.lifetime.start(%buf)
...
llvm.lifetime.end(%buf)
...
llvm.lifetime.start(%buf)
Before this change, calculateLiveIntervals() was ignoring the second
lifetime.start() and was regarding %buf as being dead from the
lifetime.end() through to the end of the basic block. This can cause
StackColoring to incorrectly merge %buf with another stack slot.
Fix by removing the incorrect Starts[pos].isValid() and
Finishes[pos].isValid() checks.
Just doing:
Starts[pos] = Indexes->getMBBStartIdx(MBB);
Finishes[pos] = Indexes->getMBBEndIdx(MBB);
unconditionally would be enough to fix the bug, but it causes some
test failures due to stack slots not being merged when they were
before. So, in order to keep the existing tests passing, treat LiveIn
and LiveOut separately rather than approximating the live ranges by
merging LiveIn and LiveOut.
This fixes PR15707.
Patch by Mark Seaborn.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181922 91177308-0d34-0410-b5e6-96231b3b80d8
We want the order to be deterministic on all platforms. NAKAMURA Takumi
fixed that in r181864. This patch is just two small cleanups:
* Move the function to the cpp file. It is only passed to array_pod_sort.
* Remove the ppc implementation which is now redundant
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181910 91177308-0d34-0410-b5e6-96231b3b80d8
This patch matches GCC behavior: the code used to only allow unaligned
load/store on ARM for v6+ Darwin, it will now allow unaligned load/store for
v6+ Darwin as well as for v7+ on other targets.
The distinction is made because v6 doesn't guarantee support (but LLVM assumes
that Apple controls hardware+kernel and therefore have conformant v6 CPUs),
whereas v7 does provide this guarantee (and Linux behaves sanely).
Overall this should slightly improve performance in most cases because of
reduced I$ pressure.
Patch by JF Bastien
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181897 91177308-0d34-0410-b5e6-96231b3b80d8
Now that PowerPC no longer uses adjustFixupOffset, and no other
back-end (ever?) did, we can remove the infrastructure itself
(incidentally addressing a FIXME to that effect).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181895 91177308-0d34-0410-b5e6-96231b3b80d8
Now that applyFixup understands differently-sized fixups, we can define
fixup_ppc_lo16/fixup_ppc_lo16_ds/fixup_ppc_ha16 to properly be 2-byte
fixups, applied at an offset of 2 relative to the start of the
instruction text.
This has the benefit that if we actually need to generate a real
relocation record, its address will come out correctly automatically,
without having to fiddle with the offset in adjustFixupOffset.
Tested on both 64-bit and 32-bit PowerPC, using external and
integrated assembler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181894 91177308-0d34-0410-b5e6-96231b3b80d8
The PPCAsmBackend::applyFixup routine handles the case where a
fixup can be resolved within the same object file. However,
this routine is currently hard-coded to assume the size of
any fixup is always exactly 4 bytes.
This is sort-of correct for fixups on instruction text; even
though it only works because several of what really would be
2-byte fixups are presented as 4-byte fixups instead (requiring
another hack in PPCELFObjectWriter::adjustFixupOffset to clean
it up).
However, this assumption breaks down completely for fixups
on data, which legitimately can be of any size (1, 2, 4, or 8).
This patch makes applyFixup aware of fixups of varying sizes,
introducing a new helper routine getFixupKindNumBytes (along
the lines of what the ARM back end does). Note that in order
to handle fixups of size 8, we also need to fix the return type
of adjustFixupValue to uint64_t to avoid truncation.
Tested on both 64-bit and 32-bit PowerPC, using external and
integrated assembler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181891 91177308-0d34-0410-b5e6-96231b3b80d8
BitVector/SmallBitVector::reference::operator bool remain implicit since
they model more exactly a bool, rather than something else that can be
boolean tested.
The most common (non-buggy) case are where such objects are used as
return expressions in bool-returning functions or as boolean function
arguments. In those cases I've used (& added if necessary) a named
function to provide the equivalent (or sometimes negative, depending on
convenient wording) test.
One behavior change (YAMLParser) was made, though no test case is
included as I'm not sure how to reach that code path. Essentially any
comparison of llvm::yaml::document_iterators would be invalid if neither
iterator was at the end.
This helped uncover a couple of bugs in Clang - test cases provided for
those in a separate commit along with similar changes to `operator bool`
instances in Clang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181868 91177308-0d34-0410-b5e6-96231b3b80d8
It should fix llvm/test/CodeGen/ARM/ehabi-mc-compact-pr*.ll on some hosts.
RELOCATION RECORDS FOR [.ARM.exidx]:
0 R_ARM_PREL31 .text
0 R_ARM_NONE __aeabi_unwind_cpp_pr0
FIXME: I am not sure of the directions of extra comparators, in Type and Index.
For now, they are different from the direction in r_offset.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181864 91177308-0d34-0410-b5e6-96231b3b80d8
InstCombine can be uncooperative to vectorization and sink loads into
conditional blocks. This prevents vectorization.
Undo this optimization if there are unconditional memory accesses to the same
addresses in the loop.
radar://13815763
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181860 91177308-0d34-0410-b5e6-96231b3b80d8
This is expanding Ben's original heuristic for short basic blocks to
also work for longer basic blocks and huge use lists.
Scan the basic block and the use list in parallel, terminating the
search when the shorter list ends. In almost all cases, either the basic
block or the use list is short, and the function returns quickly.
In one crazy test case with very long use chains, CodeGenPrepare runs
400x faster. When compiling ARMDisassembler.cpp it is 5x faster.
<rdar://problem/13840497>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181851 91177308-0d34-0410-b5e6-96231b3b80d8
