Previously we would always print the offset as decimal, regardless of
the formatting requested. Now we use the formatImm() helper so the value
is printed as the client (LLDB in the motivating example) requested.
Before:
ldr.w r8, [sp, #180] @ always
After:
ldr.w r8, [sp, #0xb4] @ when printing hex immediates
ldr.w r8, [sp, #0180] @ when printing decimal immediates
rdar://17237103
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210701 91177308-0d34-0410-b5e6-96231b3b80d8
Previously there was a separate mode entirely (--hdis vs.
--disassemble). It makes a bit more sense for the immediate printing
style to be a flag for --disassmeble rather than an entirely different
thing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210700 91177308-0d34-0410-b5e6-96231b3b80d8
This is the same problem fixed in r210664 for more types.
The test passes without this fix. For some reason
I'm only hitting this when creating selects lowered
to v2i32 selects.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210692 91177308-0d34-0410-b5e6-96231b3b80d8
The idea of this patch is to turn llvm/Support/system_error.h into a
transitional header that just brings in the erorr_code api to the llvm
namespace. I will remove it shortly afterwards.
The cases where the general idea needed some tweaking:
* std::errc is a namespace in msvc, so we cannot use "using std::errc". I could
add an #ifdef, but there were not that many uses, so I just added std:: to
them in this patch.
* Template specialization had to be moved to the std namespace in this
patch set already.
* The msvc implementation of default_error_condition doesn't seem to
provide the same transformations as we need. Not too surprising since
the standard doesn't actually say what "equivalent" means. I fixed the
problem by keeping our old mapping and using it at error_code
construction time.
Despite these shortcomings I think this is still a good thing. Some reasons:
* The different implementations of system_error might improve over time.
* It removes 925 lines of code from llvm already.
* It removes 6313 bytes from the text segment of the clang binary when
it is built with gcc and 2816 bytes when building with clang and
libstdc++.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210687 91177308-0d34-0410-b5e6-96231b3b80d8
The manual lists them as *_RTN_U32, not *_U32_RTN, which is more
consistent with how every other sized instruction is named.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210674 91177308-0d34-0410-b5e6-96231b3b80d8
There seem to be only 2 places that produce these,
and it's kind of tricky to hit them.
Also fixes failure to bitcast between i64 and v2f32,
although this for some reason wasn't actually broken in the
simple bitcast testcase, but did in the scalar_to_vector one.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210664 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
MIPS32r6/MIPS64r6 support has not been added yet.
inlineasm-cnstrnt-reg.ll:
Explicitly specify the CPU since it will not work on MIPS32r6/MIPS64r6
when -integrated-as is the default. We can't change the mnemonic since the
LO register is an implicit def of mtlo and MIPS32r6/MIPS64r6 has no
instructions that use LO.
2008-08-01-AsmInline.ll:
Explicitly specify the CPU since MIPS32r6/MIPS64r6 will correctly emit
different code and this is a regression test.
mips64instrs.ll and mips64muldiv.ll
Check registers and the way the multiply is used in m1
divrem.ll
Check registers and use multiple filecheck prefixes to limit redundancy
Reviewers: vmedic, jkolek, zoran.jovanovic, matheusalmeida
Reviewed By: matheusalmeida
Subscribers: matheusalmeida
Differential Revision: http://reviews.llvm.org/D3894
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210656 91177308-0d34-0410-b5e6-96231b3b80d8
This patch moves part of the logic implemented by the target specific
combine rules added at r210477 to a separate helper function.
This should make easier to add more rules for matching AVX/AVX2 horizontal
adds/subs.
This patch also fixes a problem caused by a wrong check performed on indices
of extract_vector_elt dag nodes in input to the scalar adds/subs.
New tests have been added to verify that we correctly check indices of
extract_vector_elt dag nodes when selecting a horizontal operation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210644 91177308-0d34-0410-b5e6-96231b3b80d8
This commit is to improve global merge pass and support global symbol merge.
The global symbol merge is not enabled by default. For aarch64, we need some
more back-end fix to make it really benifit ADRP CSE.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210640 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r206683.
The code was confusing SEH register numbers with DWARF register numbers.
The test case it was committed with was obviously incorrect. The
disassembler was roundtripping '.seh_pushreg %rsi' as '.seh_pushreg
%rbp', and other exciting things.
Noticed by Vadim Chugunov.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210574 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Implement materialize of floating point literals in Mips Fast-Isel
Reopened version of D3659
Test Plan: simplestorefp1.ll
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D4071
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210546 91177308-0d34-0410-b5e6-96231b3b80d8
This patch slightly changes the algorithm introduced at revision 210477
to fix a problem where the algorithm was producing incorrect code for
the VEX.256 encoded versions of horizontal add/sub.
For these cases, we now try to split the two 256-bit vectors into
128-bit chunks before emitting horizontal add/sub dag nodes.
Added a new test case into haddsub-2.ll.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210545 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, the basic block was searched for future uses of the base register,
and if necessary any writeback to the base register was reset using a SUB
instruction (e.g. before calling a function) just before such a use. However,
this step happened *before* the merged LDM/STM instruction was built. So if
there was (e.g.) a function call directly after the not-yet-formed LDM/STM,
the pass would first insert a SUB instruction to reset the base register,
and then (at the same location, incorrectly) insert the LDM/STM itself.
This patch fixes PR19972. Patch by Moritz Roth.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210542 91177308-0d34-0410-b5e6-96231b3b80d8
The SelectionDAG bad a special case for ISD::SELECT_CC, where it would
allow targets to specify:
setOperationAction(ISD::SELECT_CC, MVT::Other, Expand);
to indicate that they wanted to expand ISD::SELECT_CC for all types.
This wasn't applied correctly everywhere, and it makes writing new
DAG patterns with ISD::SELECT_CC difficult.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210541 91177308-0d34-0410-b5e6-96231b3b80d8
Various masks on shufflevector instructions are recognizable as
specific PowerPC instructions (vector pack, vector merge, etc.).
There is existing code in PPCISelLowering.cpp to recognize the correct
patterns for big endian code. The masks for these instructions are
different for little endian code due to the big-endian numbering
employed by these instructions. This patch adds the recognition code
for little endian.
I've added a new test case test/CodeGen/PowerPC/vec_shuffle_le.ll for
this. The existing recognizer test (vec_shuffle.ll) is unnecessarily
verbose and difficult to read, so I felt it was better to add a new
test rather than modify the old one.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210536 91177308-0d34-0410-b5e6-96231b3b80d8
inverted condition codes (CINC, CINV, CNEG, CSET, and CSETM).
Matching aliases based on "immediate classes", when disassembling,
wasn't previously supported, hence adding MCOperandPredicate
into class Operand, and implementing the support for it
in AsmWriterEmitter.
The parsing for those aliases was already custom, so just adding
the missing condition into AArch64AsmParser::parseCondCode.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210528 91177308-0d34-0410-b5e6-96231b3b80d8
As Ana Pazos pointed out, these have to be restored to their incoming values
before a function returns; i.e. before the tail call. So they can't be used
correctly as the destination register.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210525 91177308-0d34-0410-b5e6-96231b3b80d8
The C++ and C semantics of the compare_and_swap operations actually
require us to return a boolean "success" value. In LLVM terms this
means a second comparison of the output of "cmpxchg" against the input
desired value.
However, x86's "cmpxchg" instruction sets all flags for the comparison
formed, so we can skip any secondary comparison. (N.b. this isn't true
for cmpxchg8b/16b, which only set ZF).
rdar://problem/13201607
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210523 91177308-0d34-0410-b5e6-96231b3b80d8
Previously we were abandonning the attempt, leading to some combination of
extra work (when selection of a load/store fails completely) and inferior code
(when this leads to a real memcpy call instead of inlining).
rdar://problem/17187463
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210520 91177308-0d34-0410-b5e6-96231b3b80d8
We were hitting an assert if FastISel couldn't create the load or store we
requested. Currently this happens for large frame-local addresses, though
CodeGen could be improved there.
rdar://problem/17187463
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210519 91177308-0d34-0410-b5e6-96231b3b80d8
This improves the X86 cost model for small constants with large types. Before
this commit we would even hoist trivial constants such as i96 2.
This is related to <rdar://problem/17070936>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210504 91177308-0d34-0410-b5e6-96231b3b80d8
The code in PPCTargetLowering::PerformDAGCombine() that handles
unaligned Altivec vector loads generates a lvsl followed by a vperm.
As we've seen in numerous other places, the vperm instruction has a
big-endian bias, and this is fixed for little endian by complementing
the permute control vector and swapping the input operands. In this
case the lvsl is providing the permute control vector. Rather than
generating an lvsl and a complement operation, it is sufficient to
generate an lvsr instruction instead. Thus for LE code generation we
will generate an lvsr rather than an lvsl, and swap the other input
arguments on the vperm.
The existing test/CodeGen/PowerPC/vec_misalign.ll is updated to test
the code generation for PPC64 and PPC64LE, in addition to the existing
PPC32/G5 testing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210493 91177308-0d34-0410-b5e6-96231b3b80d8
