A Direct stack map location records the address of frame index. This
address is itself the value that the runtime requested. This differs
from IndirectMemRefOp locations, which refer to a stack locations from
which the requested values must be loaded. Direct locations can
directly communicate the address if an alloca, while IndirectMemRefOp
handle register spills.
For example:
entry:
%a = alloca i64...
llvm.experimental.stackmap(i32 <ID>, i32 <shadowBytes>, i64* %a)
Since both the alloca and stackmap intrinsic are in the entry block,
and the intrinsic takes the address of the alloca, the runtime can
assume that LLVM will not substitute alloca with any intervening
value. This must be verified by the runtime by checking that the stack
map's location is a Direct location type. The runtime can then
determine the alloca's relative location on the stack immediately after
compilation, or at any time thereafter. This differs from Register and
Indirect locations, because the runtime can only read the values in
those locations when execution reaches the instruction address of the
stack map.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195712 91177308-0d34-0410-b5e6-96231b3b80d8
spacing around the '*' in pointer types. Will let me use clang-format on
subsequent changes without introducing any noise. No functionality
changed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195708 91177308-0d34-0410-b5e6-96231b3b80d8
The dumper was only dumping one pubtypes set and it was /always/ dumping
one pubtypes set even when there were zero sets. Now that the dumper
correctly dumps zero, one, or many sets, we can update this test case to
test for the absolute absence of a set rather than a bogus/accidental
zero-valued set.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195706 91177308-0d34-0410-b5e6-96231b3b80d8
implementation. Silliness, but it'll be a trivial performance
optimization. This should clear up a failure on the vg_leak bot.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195704 91177308-0d34-0410-b5e6-96231b3b80d8
r195698 moved the type unit checking up into getOrCreateTypeDIE so
remove the redundant check and fold the functions back together again.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195700 91177308-0d34-0410-b5e6-96231b3b80d8
whitespace, and a couple of argument name fixes before I start hacking
on this code. No functionality changed here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195699 91177308-0d34-0410-b5e6-96231b3b80d8
It might be possible to eventually use one data structure, but I haven't
looked at the exact criteria used for accelerator tables and pubtypes to
see if there's good reason for the differences between the two or not.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195696 91177308-0d34-0410-b5e6-96231b3b80d8
Patch by Mikulas Patocka. I added the test. I checked that for cpu names that
gas knows about, it also doesn't generate nopl.
The modified cpus:
i686 - there are i686-class CPUs that don't have nopl: Via c3, Transmeta
Crusoe, Microsoft VirtualBox - see
https://bbs.archlinux.org/viewtopic.php?pid=775414
k6, k6-2, k6-3, winchip-c6, winchip2 - these are 586-class CPUs
via c3 c3-2 - see https://bugs.archlinux.org/task/19733 as a proof that
Via c3 and c3-Nehemiah don't have nopl
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195679 91177308-0d34-0410-b5e6-96231b3b80d8
This patch fixes a bug in the assembler that was causing bad code to
be emitted. When switching modes in an assembly file (e.g. arm to
thumb mode) we would always emit the opcode from the original mode.
Consider this small example:
$ cat align.s
.code 16
foo:
add r0, r0
.align 3
add r0, r0
$ llvm-mc -triple armv7-none-linux align.s -filetype=obj -o t.o
$ llvm-objdump -triple thumbv7 -d t.o
Disassembly of section .text:
foo:
0: 00 44 add r0, r0
2: 00 f0 20 e3 blx #4195904
6: 00 00 movs r0, r0
8: 00 44 add r0, r0
This shows that we have actually emitted an arm nop (e320f000)
instead of a thumb nop. Unfortunately, this encodes to a thumb
branch which causes bad things to happen when compiling assembly
code with align directives.
The fix is to notify the ARMAsmBackend when we switch mode. The
MCMachOStreamer was already doing this correctly. This patch makes
the same change for the MCElfStreamer.
There is still a bug in the way nops are emitted for alignment
because the MCAlignment fragment does not store the correct mode.
The ARMAsmBackend will emit nops for the last mode it knew about. In
the example above, we still generate an arm nop if we add a `.code
32` to the end of the file.
PR18019
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195677 91177308-0d34-0410-b5e6-96231b3b80d8
These are handled almost identically to static mode (and ELF's global address
materialisation), except that a symbol may have "$non_lazy_ptr" appended. This
can be handled by passing appropriate flags along with the instruction instead
of using entirely separate pseudo-instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195655 91177308-0d34-0410-b5e6-96231b3b80d8
These should not use COMDATs. GNU as uses .bss for .lcomm and section 0 for
.comm.
Given
static int a;
int b;
MSVC puts both in .bss. This patch then puts both .comm and .lcomm on .bss. With
this change we agree with gas on .lcomm, are much closer on .comm and clang-cl
matches msvc on the above example.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195654 91177308-0d34-0410-b5e6-96231b3b80d8
There is no sane way for an LEApcrel (= single ADR) instruction to generate a
global address on any ARM target I know of. Fortunately, no-one was trying to
any more, but there were vestigial patterns.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195644 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Moved the requirement for SelectionDAG::getConstant() to return legally
typed nodes slightly earlier. There were two optional DAGCombine passes
that were missed out and were required to produce type-legal DAGs.
Simplified a code-path in tryFoldToZero() to use SelectionDAG::getConstant().
This provides support for both promoted and expanded vector types whereas the
previous code only supported promoted vector types.
Fixes a "Type for zero vector elements is not legal" assertion detected by
an llvm-stress generated test.
Reviewers: resistor
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2251
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195635 91177308-0d34-0410-b5e6-96231b3b80d8
to what is needed for constant islands. The prescan method for Mips16 constant
islands will eventually go away. It is only temporary and should be done
earlier when the instructions are first created or from the DAG. If we keep
it here we need to handle better the situation where constant islands
is called multiple times since don't want to prescan more than once.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195569 91177308-0d34-0410-b5e6-96231b3b80d8
I had to move some code and I moved a declaration forward past it's first use
in the function but by nutty coincidence there was another variable of the same
name and type and with completely unrelated function that was declared globally
in the class so no compilation error ensued.
It required some unusual conditions for it to even matter. Caused test
case casts.c in test-suite to fail during compilation with a duplicate
symbol error. I would have noticed it during final code review for this port.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195565 91177308-0d34-0410-b5e6-96231b3b80d8
This matches other empty() container functions in LLVM.
No actual usage problems discovered in this instance.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195562 91177308-0d34-0410-b5e6-96231b3b80d8
proxy. This lets a function pass query a module analysis manager.
However, the interface is const to indicate that only cached results can
be safely queried.
With this, I think the new pass manager is largely functionally complete
for modules and analyses. Still lots to test, and need to generalize to
SCCs and Loops, and need to build an adaptor layer to support the use of
existing Pass objects in the new managers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195538 91177308-0d34-0410-b5e6-96231b3b80d8
This avoids the need for an extra list of SkeletonCUs and associated
cleanup while staging things to be cleaner for further type unit
improvements.
Also hopefully fixes a memory leak introduced in r195166.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195536 91177308-0d34-0410-b5e6-96231b3b80d8
We are going to drop debug info without a version number or with a different
version number, to make sure we don't crash when we see bitcode files with
different debug info metadata format.
Make tests more robust by removing hard-coded metadata numbers in CHECK lines.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195535 91177308-0d34-0410-b5e6-96231b3b80d8
SLP vectorization. Based on the code in BBVectorizer.
Fixes PR17741.
Patch by Raul Silvera, reviewed by Hal and Nadav. Reformatted by my
driving of clang-format. =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195528 91177308-0d34-0410-b5e6-96231b3b80d8
results.
This is the last piece of infrastructure needed to effectively support
querying *up* the analysis layers. The next step will be to introduce
a proxy which provides access to those layers with appropriate use of
const to direct queries to the safe interface.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195525 91177308-0d34-0410-b5e6-96231b3b80d8
