is a workaround for <rdar://problem/7672401/> (which I filed).
This let's us build Wine on Darwin, and it gets the Qt build there a little bit
further (so Doug says).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97845 91177308-0d34-0410-b5e6-96231b3b80d8
CALL ... %RAX<imp-def>
... [not using %RAX]
%EAX = ..., %RAX<imp-use, kill>
RET %EAX<imp-use,kill>
Now we do this:
CALL ... %RAX<imp-def, dead>
... [not using %RAX]
%EAX = ...
RET %EAX<imp-use,kill>
By not artificially keeping %RAX alive, we lower register pressure a bit.
The correct number of instructions for 2008-08-05-SpillerBug.ll is obviously
55, anybody can see that. Sheesh.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97838 91177308-0d34-0410-b5e6-96231b3b80d8
node which has a flag. That flag in turn was used by an
already-selected adde which turned into an ADC32ri8 which
used a selected load which was chained to the load we
folded. This flag use caused us to form a cycle. Fix
this by not ignoring chains in IsLegalToFold even in
cases where the isel thinks it can.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97791 91177308-0d34-0410-b5e6-96231b3b80d8
This code:
float floatingPointComparison(float x, float y) {
double product = (double)x * y;
if (product == 0.0)
return product;
return product - 1.0;
}
produces this:
_floatingPointComparison:
0000000000000000 cvtss2sd %xmm1,%xmm1
0000000000000004 cvtss2sd %xmm0,%xmm0
0000000000000008 mulsd %xmm1,%xmm0
000000000000000c pxor %xmm1,%xmm1
0000000000000010 ucomisd %xmm1,%xmm0
0000000000000014 jne 0x00000004
0000000000000016 jp 0x00000002
0000000000000018 jmp 0x00000008
000000000000001a addsd 0x00000006(%rip),%xmm0
0000000000000022 cvtsd2ss %xmm0,%xmm0
0000000000000026 ret
The "jne/jp/jmp" sequence can be reduced to this instead:
_floatingPointComparison:
0000000000000000 cvtss2sd %xmm1,%xmm1
0000000000000004 cvtss2sd %xmm0,%xmm0
0000000000000008 mulsd %xmm1,%xmm0
000000000000000c pxor %xmm1,%xmm1
0000000000000010 ucomisd %xmm1,%xmm0
0000000000000014 jp 0x00000002
0000000000000016 je 0x00000008
0000000000000018 addsd 0x00000006(%rip),%xmm0
0000000000000020 cvtsd2ss %xmm0,%xmm0
0000000000000024 ret
for a savings of 2 bytes.
This xform can happen when we recognize that jne and jp jump to the same "true"
MBB, the unconditional jump would jump to the "false" MBB, and the "true" branch
is the fall-through MBB.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97766 91177308-0d34-0410-b5e6-96231b3b80d8
These instructions technically define AL,AH, but a trick in X86ISelDAGToDAG
reads AX in order to avoid reading AH with a REX instruction.
Fix PR6489.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97742 91177308-0d34-0410-b5e6-96231b3b80d8
long test(long x) { return (x & 123124) | 3; }
Currently compiles to:
_test:
orl $3, %edi
movq %rdi, %rax
andq $123127, %rax
ret
This is because instruction and DAG combiners canonicalize
(or (and x, C), D) -> (and (or, D), (C | D))
However, this is only profitable if (C & D) != 0. It gets in the way of the
3-addressification because the input bits are known to be zero.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97616 91177308-0d34-0410-b5e6-96231b3b80d8
CopyToReg/CopyFromReg/INLINEASM. These are annoying because
they have the same opcode before an after isel. Fix this by
setting their NodeID to -1 to indicate that they are selected,
just like what automatically happens when selecting things that
end up being machine nodes.
With that done, give IsLegalToFold a new flag that causes it to
ignore chains. This lets the HandleMergeInputChains routine be
the one place that validates chains after a match is successful,
enabling the new hotness in chain processing. This smarter
chain processing eliminates the need for "PreprocessRMW" in the
X86 and MSP430 backends and enables MSP to start matching it's
multiple mem operand instructions more aggressively.
I currently #if out the dead code in the X86 backend and MSP
backend, I'll remove it for real in a follow-on patch.
The testcase changes are:
test/CodeGen/X86/sse3.ll: we generate better code
test/CodeGen/X86/store_op_load_fold2.ll: PreprocessRMW was
miscompiling this before, we now generate correct code
Convert it to filecheck while I'm at it.
test/CodeGen/MSP430/Inst16mm.ll: Add a testcase for mem/mem
folding to make anton happy. :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97596 91177308-0d34-0410-b5e6-96231b3b80d8
by loop depth and emit loop-invariant subexpressions outside of loops.
This speeds up MultiSource/Applications/viterbi and others.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97580 91177308-0d34-0410-b5e6-96231b3b80d8
was that we weren't properly handling the case when interior
nodes of a matched pattern become dead after updating chain
and flag uses. Now we handle this explicitly in
UpdateChainsAndFlags.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97561 91177308-0d34-0410-b5e6-96231b3b80d8
stuff now that we don't care about emulating the old broken
behavior of the old isel. This eliminates the
'CheckChainCompatible' check (along with IsChainCompatible) which
did an incorrect and inefficient scan *up* the chain nodes which
happened as the pattern was being formed and does the validation
at the end in HandleMergeInputChains when it forms a structural
pattern. This scans "down" the graph, which means that it is
quickly bounded by nodes already selected. This also handles
token factors that get "trapped" in the dag.
Removing the CheckChainCompatible nodes also shrinks the
generated tables by about 6K for X86 (down to 83K).
There are two pieces remaining before I can nuke PreprocessRMW:
1. I xfailed a test because we're now producing worse code in a
case that has nothing to do with the change: it turns out that
our use of MorphNodeTo will leave dead nodes in the graph
which (depending on how the graph is walked) end up causing
bogus uses of chains and blocking matches. This is really
bad for other reasons, so I'll fix this in a follow-up patch.
2. CheckFoldableChainNode needs to be improved to handle the TF.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97539 91177308-0d34-0410-b5e6-96231b3b80d8
instead of to have a chained series of scope nodes. This makes
the generated table smaller, improves the efficiency of the
interpreter, and make the factoring optimization much more
reasonable to implement.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97160 91177308-0d34-0410-b5e6-96231b3b80d8
terms of store and load, which means bitcasting between scalar
integer and vector has endian-specific results, which undermines
this whole approach.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97137 91177308-0d34-0410-b5e6-96231b3b80d8
which branch on undef to branch on a boolean constant for the edge
exiting the loop. This helps ScalarEvolution compute trip counts for
loops.
Teach ScalarEvolution to recognize single-value PHIs, when safe, and
ForgetSymbolicName to forget such single-value PHI nodes as apprpriate
in ForgetSymbolicName.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97126 91177308-0d34-0410-b5e6-96231b3b80d8
the number of value bits, not the number of bits of allocation for in-memory
storage.
Make getTypeStoreSize and getTypeAllocSize work consistently for arrays and
vectors.
Fix several places in CodeGen which compute offsets into in-memory vectors
to use TargetData information.
This fixes PR1784.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97064 91177308-0d34-0410-b5e6-96231b3b80d8
necessary to swap the operands to handle NaN and negative zero properly.
Also, reintroduce logic for checking for NaN conditions when forming
SSE min and max instructions, fixed to take into consideration NaNs and
negative zeros. This allows forming min and max instructions in more
cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97025 91177308-0d34-0410-b5e6-96231b3b80d8
to adding them in a determinstic order (bottom up from
the root) based on the structure of the graph itself.
This updates tests for some random changes, interesting
bits: CodeGen/Blackfin/promote-logic.ll no longer crashes.
I have no idea why, but that's good right?
CodeGen/X86/2009-07-16-LoadFoldingBug.ll also fails, but
now compiles to have one fewer constant pool entry, making
the expected load that was being folded disappear. Since it
is an unreduced mass of gnast, I just removed it.
This fixes PR6370
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97023 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, LiveIntervalAnalysis would infer phi joins by looking for multiply
defined registers. That doesn't work if the phi join is implicitly defined in
all but one of the predecessors.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96994 91177308-0d34-0410-b5e6-96231b3b80d8
operators.
The test difference is just due to the multiplication operands
being commuted (and thus requiring a more elaborate match). In
optimized code, that expression would be folded.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96816 91177308-0d34-0410-b5e6-96231b3b80d8
during a tail call. A parameter might overwrite this stack slot during the tail
call.
The sequence during a tail call is:
1.) load return address to temp reg
2.) move parameters (might involve storing to return address stack slot)
3.) store return address to new location from temp reg
If the stack location is marked immutable CodeGen can colocate load (1) with the
store (3).
This fixes bug 6225.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96783 91177308-0d34-0410-b5e6-96231b3b80d8
SSE min and max instructions. The real thing this code needs to be
concerned about is negative zero.
Update the sse-minmax.ll test accordingly, and add tests for
-enable-unsafe-fp-math mode as well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96775 91177308-0d34-0410-b5e6-96231b3b80d8
dragonegg self-host build. I reverted 96640 in order to revert
96556 (96640 goes on top of 96556), but it also looks like with
both of them applied the breakage happens even earlier. The
symptom of the 96556 miscompile is the following crash:
llvm[3]: Compiling AlphaISelLowering.cpp for Release build
cc1plus: /home/duncan/tmp/tmp/llvm/lib/CodeGen/SelectionDAG/SelectionDAG.cpp:4982: void llvm::SelectionDAG::ReplaceAllUsesWith(llvm::SDNode*, llvm::SDNode*, llvm::SelectionDAG::DAGUpdateListener*): Assertion `(!From->hasAnyUseOfValue(i) || From->getValueType(i) == To->getValueType(i)) && "Cannot use this version of ReplaceAllUsesWith!"' failed.
Stack dump:
0. Running pass 'X86 DAG->DAG Instruction Selection' on function '@_ZN4llvm19AlphaTargetLowering14LowerOperationENS_7SDValueERNS_12SelectionDAGE'
g++: Internal error: Aborted (program cc1plus)
This occurs when building LLVM using LLVM built by LLVM (via
dragonegg). Probably LLVM has miscompiled itself, though it
may have miscompiled GCC and/or dragonegg itself: at this point
of the self-host build, all of GCC, LLVM and dragonegg were built
using LLVM. Unfortunately this kind of thing is extremely hard
to debug, and while I did rummage around a bit I didn't find any
smoking guns, aka obviously miscompiled code.
Found by bisection.
r96556 | evancheng | 2010-02-18 03:13:50 +0100 (Thu, 18 Feb 2010) | 5 lines
Some dag combiner goodness:
Transform br (xor (x, y)) -> br (x != y)
Transform br (xor (xor (x,y), 1)) -> br (x == y)
Also normalize (and (X, 1) == / != 1 -> (and (X, 1)) != / == 0 to match to "test on x86" and "tst on arm"
r96640 | evancheng | 2010-02-19 01:34:39 +0100 (Fri, 19 Feb 2010) | 16 lines
Transform (xor (setcc), (setcc)) == / != 1 to
(xor (setcc), (setcc)) != / == 1.
e.g. On x86_64
%0 = icmp eq i32 %x, 0
%1 = icmp eq i32 %y, 0
%2 = xor i1 %1, %0
br i1 %2, label %bb, label %return
=>
testl %edi, %edi
sete %al
testl %esi, %esi
sete %cl
cmpb %al, %cl
je LBB1_2
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96672 91177308-0d34-0410-b5e6-96231b3b80d8
strides in foreign loops. This helps locate reuse opportunities
with existing induction variables in foreign loops and reduces
the need for inserting new ones. This fixes rdar://7657764.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96629 91177308-0d34-0410-b5e6-96231b3b80d8
which is not always true if the mask contains undefs. Modified it to return
the first non undef value.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96621 91177308-0d34-0410-b5e6-96231b3b80d8
