During an indirect function call sequence on the 64-bit SVR4 ABI,
generate code must load and then restore the TOC register.
This does not use a regular LOAD instruction since the TOC
register r2 is marked as reserved. Instead, the are two
special instruction patterns:
let RST = 2, DS = 2 in
def LDinto_toc: DSForm_1a<58, 0, (outs), (ins g8rc:$reg),
"ld 2, 8($reg)", IIC_LdStLD,
[(PPCload_toc i64:$reg)]>, isPPC64;
let RST = 2, DS = 10, RA = 1 in
def LDtoc_restore : DSForm_1a<58, 0, (outs), (ins),
"ld 2, 40(1)", IIC_LdStLD,
[(PPCtoc_restore)]>, isPPC64;
Note that these not only restrict the destination of the
load to r2, but they also restrict the *source* of the
load to particular address combinations. The latter is
a problem when we want to support the ELFv2 ABI, since
there the TOC save slot is no longer at 40(1).
This patch replaces those two instructions with a single
instruction pattern that only hard-codes r2 as destination,
but supports generic addresses as source. This will allow
supporting the ELFv2 ABI, and also helps generate more
efficient code for calls to absolute addresses (allowing
simplification of the ppc64-calls.ll test case).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211193 91177308-0d34-0410-b5e6-96231b3b80d8
As requested by Hal Finkel, this adds back a test for calls to
a known-constant function pointer value, and verifies that the
64-bit SVR4 indirect function call sequence is used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211190 91177308-0d34-0410-b5e6-96231b3b80d8
Note that I followed the AVX2 convention here and didn't add LLVM intrinsics
for stores. These can be generated with the nontemporal hint on LLVM IR
stores (see new test). The GCC builtins are lowered directly into nontemporal
stores.
<rdar://problem/17082571>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211176 91177308-0d34-0410-b5e6-96231b3b80d8
Use the max 64-bit element size with EVEX_CD8. This should work since element
size is ignored for a full-vector access (FVM).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211175 91177308-0d34-0410-b5e6-96231b3b80d8
The PowerPC back-end uses BLA to implement calls to functions at
known-constant addresses, which is apparently used for certain
system routines on Darwin.
However, with the 64-bit SVR4 ABI, this is actually incorrect.
An immediate function pointer value on this platform is not
directly usable as a target address for BLA:
- in the ELFv1 ABI, the function pointer value refers to the
*function descriptor*, not the code address
- in the ELFv2 ABI, the function pointer value refers to the
global entry point, but BL(A) would only be correct when
calling the *local* entry point
This bug didn't show up since using immediate function pointer
values is not usually done in the 64-bit SVR4 ABI in the first
place. However, I ran into this issue with a certain use case
of LLVM as JIT, where immediate function pointer values were
uses to implement callbacks from JITted code to helpers in
statically compiled code.
Fixed by simply not using BLA with the 64-bit SVR4 ABI.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211174 91177308-0d34-0410-b5e6-96231b3b80d8
All tests in test/tools/llvm-cov fail on big-endian targets and are
supposed to be XFAILed there. However, including "powerpc64" in the
XFAIL line is now incorrect, since that matches both powerpc64- and
powerpc64le- targets, and the tests pass on the latter.
Update the XFAIL lines to use powerpc64- instead (like mips64-).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211172 91177308-0d34-0410-b5e6-96231b3b80d8
My patch r204634 to emit instructions in little-endian format failed to
handle those special cases where we emit a pair of instructions from a
single LLVM MC instructions (like the bl; nop pairs used to implement
the call sequence).
In those cases, we still need to emit the "first" instruction (the one
in the more significant word) first, on both big and little endian,
and not swap them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211171 91177308-0d34-0410-b5e6-96231b3b80d8
Since we now support both LE and BE PPC64 variants, use of getAddend64BE
is no longer correct. Use the generic getELFRelocationAddend instead,
as was already done for Mips.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211170 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The assembler tries to reuse the destination register for memory operations whenever
it can but it's not possible to do so if the destination register is not a GPR.
Example:
ldc1 $f0, sym
should expand to:
lui $at, %hi(sym)
ldc1 $f0, %lo(sym)($at)
It's entirely wrong to expand to:
lui $f0, %hi(sym)
ldc1 $f0, %lo(sym)($f0)
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D4173
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211169 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch doesn't really change the logic behind expandMemInst but it allows
us to assemble .S files that use .set noat with some macros. For example:
.set noat
lw $k0, offset($k1)
Can expand to:
lui $k0, %hi(offset)
addu $k0, $k0, $k1
lw $k0, %lo(offset)($k0)
with no need to access $at.
Reviewers: dsanders, vmedic
Reviewed By: dsanders, vmedic
Differential Revision: http://reviews.llvm.org/D4159
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211165 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Added negative test case so that we can be sure we handle erroneous situations
while parsing the .cpsetup directive.
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D3681
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211160 91177308-0d34-0410-b5e6-96231b3b80d8
It looks like there are two versions of LowerCallTo here: the
SelectionDAGBuilder one is designed to operate on LLVM IR, and the
TargetLowering one in the case where everything is at DAG level.
Previously, only the SelectionDAGBuilder variant could handle demoting
an impossible return to sret semantics (before delegating to the
TargetLowering version), but this functionality is also useful for
certain libcalls (e.g. 128-bit operations on 32-bit x86). So this
commit moves the sret handling down a level.
rdar://problem/17242889
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211155 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Provides an abstraction for a random number generator (RNG) that produces a stream of pseudo-random numbers.
The current implementation uses C++11 facilities and is therefore not cryptographically secure.
The RNG is salted with the text of the current command line invocation.
In addition, a user may specify a seed (reproducible builds).
In clang, the seed can be set via
-frandom-seed=X
In the back end, the seed can be set via
-rng-seed=X
This is the llvm part of the patch.
clang part: D3391
Reviewers: ahomescu, rinon, nicholas, jfb
Reviewed By: jfb
Subscribers: jfb, perl
Differential Revision: http://reviews.llvm.org/D3390
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211145 91177308-0d34-0410-b5e6-96231b3b80d8
ReconstructShuffle() may wrongly creat a CONCAT_VECTOR trying to
concat 2 of v2i32 into v4i16. This commit is to fix this issue and
try to generate UZP1 instead of lots of MOV and INS.
Patch is initalized by Kevin Qin, and refactored by Tim Northover.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211144 91177308-0d34-0410-b5e6-96231b3b80d8
This patch is a follow up to r211040 & r211052. Rather than bailing out of fast
isel this patch will generate an alternate instruction (movabsq) instead of the
leaq. While this will always have enough room to handle the 64 bit displacment
it is generally over kill for internal symbols (most displacements will be
within 32 bits) but since we have no way of communicating the code model to the
the assmebler in order to avoid flagging an absolute leal/leaq as illegal when
using a symbolic displacement.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211130 91177308-0d34-0410-b5e6-96231b3b80d8
This optimizes predicates for certain compares, such as fcmp oeq %x, %x to
fcmp ord %x, %x. The latter one is more efficient to generate.
The same optimization is applied to conditional branches.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211126 91177308-0d34-0410-b5e6-96231b3b80d8
This pattern loses some of its usefulness when the mutex type is
statically polymorphic as opposed to runtime polymorphic, as
swapping out the mutex type requires changing a significant number
of function parameters, and templatizing the function parameter
requires the methods to be defined in the headers.
Furthermore, if LLVM is compiled with threads disabled then there
may even be no mutex to acquire anyway, so it should not be up to
individual APIs to know whether or not acquiring a mutex is required
to use those APIs to begin with. It should be up to the user of the
API.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211125 91177308-0d34-0410-b5e6-96231b3b80d8
Add all inputs to the array, except those starting with @, which
are treated as response files and expanded.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211119 91177308-0d34-0410-b5e6-96231b3b80d8
The OSX ranlib warns on files with no symbols, and lib/Support/WindowsError.cpp
was empty when building on non-windows.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211118 91177308-0d34-0410-b5e6-96231b3b80d8
and the -l option for the long format. Also when the object is a Mach-O
file and the format is berkeley produce output like darwin’s default size(1)
summary berkeley derived output.
Like System V format, there are also some small changes in how and where
the file names and archive member names are printed for darwin and
Mach-O.
Like the changes to llvm-nm these are the first steps in seeing if it is
possible to make llvm-size produce the same output as darwin's size(1).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211117 91177308-0d34-0410-b5e6-96231b3b80d8
mark the old JIT tests as unsupported for powerpc64 - CMake style.
This follows the style used for hexagon/arm64/aarch64.
The equivalent tests still run under the supported MCJIT/*
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211111 91177308-0d34-0410-b5e6-96231b3b80d8
