Before this patch the bitcode reader would read a module from a file
that contained in order:
* Any number of non MODULE_BLOCK sub blocks.
* One MODULE_BLOCK
* Any number of non MODULE_BLOCK sub blocks.
* 4 '\n' characters to handle OS X's ranlib.
Since we support lazy reading of modules, any information that is relevant
for the module has to be in the MODULE_BLOCK or before it. We don't gain
anything from checking what is after.
This patch then changes the reader to stop once the MODULE_BLOCK has been
successfully parsed.
This avoids the ugly special case for .bc files in an archive and makes it
easier to embed bitcode files.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239845 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
When propagating mass through irregular loops, the mass flowing through
each loop header may not be equal. This was causing wrong frequencies
to be computed for irregular loop headers.
Fixed by keeping track of masses flowing through each of the headers in
an irregular loop. To do this, we now keep track of per-header backedge
weights. After the loop mass is distributed through the loop, the
backedge weights are used to re-distribute the loop mass to the loop
headers.
Since each backedge will have a mass proportional to the different
branch weights, the loop headers will end up with a more approximate
weight distribution (as opposed to the current distribution that assumes
that every loop header is the same).
Reviewers: dexonsmith
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10348
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239843 91177308-0d34-0410-b5e6-96231b3b80d8
While completely undefined registers are easy to catch and get their
<undef> flag early in ProcessImplicitDefs/RegisterCoalescer reading from
a partially defined register where just the subreg happens to be
undefined is harder to catch so we only add the undef flag in the
virtual register rewriting step.
No testcase as I cannot reproduce the problem on any of the in-tree targets at
the moment.
This fixes rdar://21387089
Differential Revision: http://reviews.llvm.org/D10470
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239838 91177308-0d34-0410-b5e6-96231b3b80d8
LaneMasks as given by getSubRegIndexLaneMask() have a limited number of
of bits, so for targets with more than 31 disjunct subregister there may
be cases where:
getSubReg(Reg,A) does not overlap getSubReg(Reg,B)
but we still have
(getSubRegIndexLaneMask(A) & getSubRegIndexLaneMask(B)) != 0.
I had hoped to keep this an implementation detail of the tablegen but as
my next commit shows we can avoid unnecessary imp-defs operands if we
know that the lane masks in use are precise.
This is in preparation to http://reviews.llvm.org/D10470.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239837 91177308-0d34-0410-b5e6-96231b3b80d8
Old names, new names, and what they really mean:
- IsWin64 -> IsWin64CC: This is true on non-Windows x86_64 platforms
when the ms_abi calling convention is used.
- IsWinEH -> IsWin64Prologue: True when the target is Win64, regardless
of calling convention. Changes the prologue to obey the constraints of
the Win64 unwinder.
- NeedsWinEH -> NeedsWinCFI: We're using the win64 prologue *and* the we
want .xdata unwind tables. Analogous to NeedsDwarfCFI.
NFC
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239836 91177308-0d34-0410-b5e6-96231b3b80d8
A reduction is a special kind of recurrence. In the loop vectorizer we currently
identify basic reductions. Future patches will extend this to identifying basic
recurrences.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239835 91177308-0d34-0410-b5e6-96231b3b80d8
This commit reports an error when a machine function from a MIR file that contains
LLVM IR can't find a function with the same name in the loaded LLVM IR module.
Reviewers: Duncan P. N. Exon Smith
Differential Revision: http://reviews.llvm.org/D10468
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239831 91177308-0d34-0410-b5e6-96231b3b80d8
This is an updated version of the patch that was checked in at:
http://reviews.llvm.org/rL237046
but subsequently reverted because it exposed a bug in the DAG Combiner:
http://reviews.llvm.org/D9893
This time, there's an enablement flag ("EnableFMFInDAG") around the code in
SelectionDAGBuilder where we copy the set of FP optimization flags from IR
instructions to DAG nodes. So, in theory, there should be no functional change
from this patch as-is, but it will allow testing with the added functionality
to proceed via "-enable-fmf-dag" passed to llc.
This patch adds the minimum plumbing necessary to use IR-level
fast-math-flags (FMF) in the backend without actually using
them for anything yet. This is a follow-on to:
http://reviews.llvm.org/rL235997
Differential Revision: http://reviews.llvm.org/D10403
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239828 91177308-0d34-0410-b5e6-96231b3b80d8
Reapply r239539. Don't assume the collected number of
stores is the same vector size. Just take the first N
stores to fill the vector.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239825 91177308-0d34-0410-b5e6-96231b3b80d8
Any combination of +-inf/+-inf is NaN so it's already ignored with
nnan and we can skip checking for ninf. Also rephrase logic in comments
a bit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239821 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Relocs that can be converted from absolute to PC-relative now do so if IsPCRel
is true. Relocs that require PC-relative now call llvm_unreachable() if IsPCRel
is false and similarly those that require absolute assert that IsPCRel is false.
Note that while it looks like some relocs (e.g. R_MIPS_26) can be converted into
the MIPS32r6/MIPS64r6 relocs (R_MIPS_PC*_S2), it isn't actually valid to do so.
Placeholders have been left in the testcase for unsupported relocs and relocs
that cannot be generated at the moment.
Reviewers: vkalintiris
Reviewed By: vkalintiris
Subscribers: llvm-commits, rafael
Differential Revision: http://reviews.llvm.org/D10184
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239817 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This continues the patch series to eliminate StringRef forms of GNU triples
from the internals of LLVM that began in r239036.
Reviewers: rengolin
Reviewed By: rengolin
Subscribers: llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D10381
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239815 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This affects other tools so the previous C++ API has been retained as a
deprecated function for the moment. Clang has been updated with a trivial
patch (not covered by the pre-commit review) to avoid breaking -Werror builds.
Other in-tree tools will be fixed with similar patches.
This continues the patch series to eliminate StringRef forms of GNU triples
from the internals of LLVM that began in r239036.
The first time this was committed it accidentally fixed an inconsistency in
triples in llvm-mc and this caused a failure. This inconsistency was fixed in
r239808.
Reviewers: rengolin
Reviewed By: rengolin
Subscribers: llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D10366
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239812 91177308-0d34-0410-b5e6-96231b3b80d8
The successors cache is now a local variable, making it more visible that it
is only valid for the MBB being processed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239807 91177308-0d34-0410-b5e6-96231b3b80d8
When we multiply two 64-bit vectors, we extract lower and upper part and use the PMULUDQ instruction.
When one of the operands is a constant, the upper part may be zero, we know this at compile time.
Example: %a = mul <4 x i64> %b, <4 x i64> < i64 5, i64 5, i64 5, i64 5>.
I'm checking the value of the upper part and prevent redundant "multiply", "shift" and "add" operations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239802 91177308-0d34-0410-b5e6-96231b3b80d8
These are really immediate DUPs, and suffer from the same problem
with long instructions with a high/2 variant (e.g. smull).
By extending a MOVI (or DUP, before this patch), we can avoid an ext
on the other operand of the long instruction, e.g. turning:
ext.16b v0, v0, v0, #8
movi.4h v1, #0x53
smull.4s v0, v0, v1
into:
movi.8h v1, #0x53
smull2.4s v0, v0, v1
While there, add a now-necessary combine to fold (VT NVCAST (VT x)).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239799 91177308-0d34-0410-b5e6-96231b3b80d8
This change is hopefully NFC. The only tricky part is that I changed the context instruction being used to the branch rather than the comparison. I believe both to be correct, but the branch is strictly more powerful. With the moved code, using the branch instruction is required for the basic block comparison test to return the same result. The previous code was able to directly access both the branch and the comparison where the revised code is not.
Differential Revision: http://reviews.llvm.org/D9652
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239797 91177308-0d34-0410-b5e6-96231b3b80d8
`LLVM_ENABLE_MODULES` builds sometimes fail because `Intrinsics.td`
needs to regenerate `Instrinsics.h` before anyone can include anything
from the LLVM_IR module. Represent the dependency explicitly to prevent
that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239796 91177308-0d34-0410-b5e6-96231b3b80d8
This commit decouples the MIR printer and the MIR printing pass so
that it will be possible to move the MIR printer into a separate
machine IR library later on.
Reviewers: Duncan P. N. Exon Smith
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239788 91177308-0d34-0410-b5e6-96231b3b80d8
This commit creates a dummy LLVM IR function with one basic block and an unreachable
instruction for each parsed machine function when the MIR file doesn't have LLVM IR.
This change is required as the machine function analysis pass creates machine
functions only for the functions that are defined in the current LLVM module.
Reviewers: Duncan P. N. Exon Smith
Differential Revision: http://reviews.llvm.org/D10135
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239778 91177308-0d34-0410-b5e6-96231b3b80d8
This commit reports an error when the MIR parser encounters a machine
function with the name that is the same as the name of a different
machine function.
Reviewers: Duncan P. N. Exon Smith
Differential Revision: http://reviews.llvm.org/D10130
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239774 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds the safe stack instrumentation pass to LLVM, which separates
the program stack into a safe stack, which stores return addresses, register
spills, and local variables that are statically verified to be accessed
in a safe way, and the unsafe stack, which stores everything else. Such
separation makes it much harder for an attacker to corrupt objects on the
safe stack, including function pointers stored in spilled registers and
return addresses. You can find more information about the safe stack, as
well as other parts of or control-flow hijack protection technique in our
OSDI paper on code-pointer integrity (http://dslab.epfl.ch/pubs/cpi.pdf)
and our project website (http://levee.epfl.ch).
The overhead of our implementation of the safe stack is very close to zero
(0.01% on the Phoronix benchmarks). This is lower than the overhead of
stack cookies, which are supported by LLVM and are commonly used today,
yet the security guarantees of the safe stack are strictly stronger than
stack cookies. In some cases, the safe stack improves performance due to
better cache locality.
Our current implementation of the safe stack is stable and robust, we
used it to recompile multiple projects on Linux including Chromium, and
we also recompiled the entire FreeBSD user-space system and more than 100
packages. We ran unit tests on the FreeBSD system and many of the packages
and observed no errors caused by the safe stack. The safe stack is also fully
binary compatible with non-instrumented code and can be applied to parts of
a program selectively.
This patch is our implementation of the safe stack on top of LLVM. The
patches make the following changes:
- Add the safestack function attribute, similar to the ssp, sspstrong and
sspreq attributes.
- Add the SafeStack instrumentation pass that applies the safe stack to all
functions that have the safestack attribute. This pass moves all unsafe local
variables to the unsafe stack with a separate stack pointer, whereas all
safe variables remain on the regular stack that is managed by LLVM as usual.
- Invoke the pass as the last stage before code generation (at the same time
the existing cookie-based stack protector pass is invoked).
- Add unit tests for the safe stack.
Original patch by Volodymyr Kuznetsov and others at the Dependable Systems
Lab at EPFL; updates and upstreaming by myself.
Differential Revision: http://reviews.llvm.org/D6094
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239761 91177308-0d34-0410-b5e6-96231b3b80d8
This commit connects the machine function analysis pass (which creates machine
functions) to the MIR parser, which will initialize the machine functions
with the state from the MIR file and reconstruct the machine IR.
This commit introduces a new interface called 'MachineFunctionInitializer',
which can be used to provide custom initialization for the machine functions.
This commit also introduces a new diagnostic class called
'DiagnosticInfoMIRParser' which is used for MIR parsing errors.
This commit modifies the default diagnostic handling in LLVMContext - now the
the diagnostics are printed directly into llvm::errs() so that the MIR parsing
errors can be printed with colours.
Reviewers: Justin Bogner
Differential Revision: http://reviews.llvm.org/D9928
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239753 91177308-0d34-0410-b5e6-96231b3b80d8
Use the same argument names as the members.
Use default member initializes.
Extracted from a patch by Karl Schimpf.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239749 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
NFC: no one uses AnalyzeBranchPredicate yet.
Add TargetInstrInfo::AnalyzeBranchPredicate and implement for x86. A
later change adding support for page-fault based implicit null checks
depends on this.
Reviewers: reames, ab, atrick
Reviewed By: atrick
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10200
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239742 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
TargetInstrInfo::getLdStBaseRegImmOfs to
TargetInstrInfo::getMemOpBaseRegImmOfs and implement for x86. The
implementation only handles a few easy cases now and will be made more
sophisticated in the future.
This is NFCI: the only user of `getLdStBaseRegImmOfs` (now
`getmemOpBaseRegImmOfs`) is `LoadClusterMotion` and `LoadClusterMotion`
is disabled for x86.
Reviewers: reames, ab, MatzeB, atrick
Reviewed By: MatzeB, atrick
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10199
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239741 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This instruction encodes a loading operation that may fault, and a label
to branch to if the load page-faults. The locations of potentially
faulting loads and their "handler" destinations are recorded in a
FaultMap section, meant to be consumed by LLVM's clients.
Nothing generates FAULTING_LOAD_OP instructions yet, but they will be
used in a future change.
The documentation (FaultMaps.rst) needs improvement and I will update
this diff with a more expanded version shortly.
Depends on D10196
Reviewers: rnk, reames, AndyAyers, ab, atrick, pgavlin
Reviewed By: atrick, pgavlin
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10197
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239740 91177308-0d34-0410-b5e6-96231b3b80d8
