If the SI_KILL operand is constant, we can either clear the exec mask if
the operand is negative, or do nothing otherwise.
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202337 91177308-0d34-0410-b5e6-96231b3b80d8
The current approach to lower a vsetult is to flip the sign bit of the
operands, swap the operands and then use a (signed) pcmpgt. psubus (unsigned
saturating subtract) can be used to emulate a vsetult more efficiently:
+ case ISD::SETULT: {
+ // If the comparison is against a constant we can turn this into a
+ // setule. With psubus, setule does not require a swap. This is
+ // beneficial because the constant in the register is no longer
+ // destructed as the destination so it can be hoisted out of a loop.
I also enable lowering via psubus in a few other cases where it's clearly
beneficial: setule and setuge if minu/maxu cannot be used.
rdar://problem/14338765
Patch by Adam Nemet <anemet@apple.com>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202301 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This should fix the MCJIT unit tests that were broken by r201792 on the MIPS buildbot.
MIPS currently uses the default implementation of sys::getHostCPUName() which
always returns "generic". For now, we will accept "generic" and coerce it to
"mips32" or "mips64" depending on the target architecture like we do for empty
CPU names.
Reviewers: jacksprat, matheusalmeida
Reviewed By: jacksprat
Differential Revision: http://llvm-reviews.chandlerc.com/D2878
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202253 91177308-0d34-0410-b5e6-96231b3b80d8
Eventually DataLayoutPass should go away, but for now that is the only easy
way to get a DataLayout in some APIs. This patch only changes the ones that
have easy access to a Module.
One interesting issue with sometimes using DataLayoutPass and sometimes
fetching it from the Module is that we have to make sure they are equivalent.
We can get most of the way there by always constructing the pass with a Module.
In fact, the pass could be changed to point to an external DataLayout instead
of owning one to make this stricter.
Unfortunately, the C api passes a DataLayout, so it has to be up to the caller
to make sure the pass and the module are in sync.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202204 91177308-0d34-0410-b5e6-96231b3b80d8
We need to abort the formation of counter-register-based loops where there are
128-bit integer operations that might become function calls.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202192 91177308-0d34-0410-b5e6-96231b3b80d8
Instead, have a DataLayoutPass that holds one. This will allow parts of LLVM
don't don't handle passes to also use DataLayout.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202168 91177308-0d34-0410-b5e6-96231b3b80d8
The behaviour of the XCore's instruction buffer means that the performance
of the same code sequence can differ depending on whether it starts at a 4
byte aligned address or not. Since we don't model the instruction buffer
in the backend we have no way of knowing for sure if it is beneficial to
word align a specific function. However, in the absence of precise
modelling, it is better on balance to word align functions because:
* It makes a fetch-nop while executing the prologue slightly less likely.
* If we don't word align functions then a small perturbation in one
function can have a dramatic knock on effect. If the size of the function
changes it might change the alignment and therefore the performance of
all the functions that happen to follow it in the binary. This butterfly
effect makes it harder to reason about and measure the performance of
code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202163 91177308-0d34-0410-b5e6-96231b3b80d8
The check is clearer as southern islands or later,
rather than checking for later than northern islands.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202076 91177308-0d34-0410-b5e6-96231b3b80d8
The patch defines new or refines existing generic scheduling classes to match
the behavior of the SSE instructions.
It also maps those scheduling classes on the related SSE instructions.
<rdar://problem/15607571>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202065 91177308-0d34-0410-b5e6-96231b3b80d8
After this I will set the default back to F_None. The advantage is that
before this patch forgetting to set F_Binary would corrupt a file on windows.
Forgetting to set F_Text produces one that cannot be read in notepad, which
is a better failure mode :-)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202052 91177308-0d34-0410-b5e6-96231b3b80d8
.align is handled specially on certain targets. .align without any parameters
on ARM indicates a default alignment (4). Handle the special case in the target
parser, but fall back to the generic parser for the normal version.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201988 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for the .short and its alias .hword for adding literal values
into the object file. This is similar to the .word directive, however, rather
than inserting a value of 4 bytes, adds a 2-byte value.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201968 91177308-0d34-0410-b5e6-96231b3b80d8
This commit moves getSLEB128Size() and getULEB128Size() from
MCAsmInfo to LEB128.h and removes some copy-and-paste code.
Besides, this commit also adds some unit tests for the LEB128
functions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201937 91177308-0d34-0410-b5e6-96231b3b80d8
The lowering of the frame index for stackmaps and patchpoints requires some
target-specific magic and should therefore be handled in the target-specific
eliminateFrameIndex method.
This is related to <rdar://problem/16106219>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201904 91177308-0d34-0410-b5e6-96231b3b80d8
The va_start macro for AArch64 must set va_list.__stack to the address
following the last named argument on the stack, rounded up to an alignment
of 8 bytes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201797 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This removes the need to coerce UnknownABI to the default ABI (O32 for
MIPS32, N64 for MIPS64 [*]) in both MipsSubtarget and MipsAsmParser.
Clang has been updated to disable both possible default ABI's before enabling
the ABI it intends to use.
[*] N64 being the default for MIPS64 is not actually correct.
However N32 is not fully implemented/tested yet.
Depends on: D2830
Reviewers: jacksprat, matheusalmeida
Reviewed By: matheusalmeida
Differential Revision: http://llvm-reviews.chandlerc.com/D2832
Differential Revision: http://llvm-reviews.chandlerc.com/D2846
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201792 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This is consistent with the integrated assembler.
All mips64 codegen tests previously passed -mcpu. Removed -mcpu from
blez_bgez.ll and const-mult.ll to cover the default case.
Ideally, the two implementations of selectMipsCPU() will be merged but it's
proven difficult to find a home for the function that doesn't cause link errors.
For now, we'll hoist the common functionality into a function and mark it with
FIXME's.
Reviewers: jacksprat, matheusalmeida
Reviewed By: matheusalmeida
Differential Revision: http://llvm-reviews.chandlerc.com/D2830
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201782 91177308-0d34-0410-b5e6-96231b3b80d8
