It had patterns for zext-loading and extending. This commit adds patterns for loading a wide type, performing a bitcast,
and extending. This is an odd pattern, but it is commonly used when writing code with intrinsics.
rdar://11897677
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163995 91177308-0d34-0410-b5e6-96231b3b80d8
The live range of an SSA value forms a sub-tree of the dominator tree.
That means the live ranges of two values overlap if and only if the def
of one value lies within the live range of the other.
This can be used to simplify the interference checking a bit: Visit each
def in the two registers about to be joined. Check for interference
against the value that is live in the other register at the def point
only. It is not necessary to scan the set of overlapping live ranges,
this interference check can be done while computing the value mapping
required for the final live range join.
The new algorithm is prepared to handle more complicated conflict
resolution - We can allow overlapping live ranges with different values
as long as the differing lanes are undef or unused in the other
register.
The implementation in this patch doesn't do that yet, it creates code
that is nearly identical to the old algorithm's, except:
- The new stripCopies() function sees through multiple copies while
the old RegistersDefinedFromSameValue() only can handle one.
- There are a few rare cases where the new algorithm can erase an
IMPLICIT_DEF instuction that RegistersDefinedFromSameValue() couldn't
handle.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163991 91177308-0d34-0410-b5e6-96231b3b80d8
A value that is live in to a basic block should be returned by valueIn()
in LiveRangeQuery(getMBBStartIdx(MBB)), unless it is a PHI-def which
should be returned by valueDefined() instead.
Current code isn't using this functionality. Future code will.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163990 91177308-0d34-0410-b5e6-96231b3b80d8
Kill flags are removed more and more aggressively during the register
allocation passes, it is better to get information from LiveIntervals.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163972 91177308-0d34-0410-b5e6-96231b3b80d8
If a PHI value happens to be live out from the layout predecessor of its
def block, the def slot index will be in the middle of the segment:
%vreg11 = [192r,240B:0)[352r,416B:2)[416B,496r:1) 0@192r 1@480B-phi %2@352r
A LiveRangeQuery for 480 should return NULL from valueIn() since the
PHI value is defined at the block entry, not live in to the block.
No test case, future code depends on this functionality.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163971 91177308-0d34-0410-b5e6-96231b3b80d8
new one, and add support for running the new pass in that mode and in
that slot of the pass manager. With this the new pass can completely
replace the old one within the pipeline.
The strategy for enabling or disabling the SSAUpdater logic is to do it
by making the requirement of the domtree analysis optional. By default,
it is required and we get the standard mem2reg approach. This is usually
the desired strategy when run in stand-alone situations. Within the
CGSCC pass manager, we disable requiring of the domtree analysis and
consequentially trigger fallback to the SSAUpdater promotion.
In theory this would allow the pass to re-use a domtree if one happened
to be available even when run in a mode that doesn't require it. In
practice, it lets us have a single pass rather than two which was
simpler for me to wrap my head around.
There is a hidden flag to force the use of the SSAUpdater code path for
the purpose of testing. The primary testing strategy is just to run the
existing tests through that path. One notable difference is that it has
custom code to handle lifetime markers, and one of the tests has been
enhanced to exercise that code.
This has survived a bootstrap and the test suite without serious
correctness issues, however my run of the test suite produced *very*
alarming performance numbers. I don't entirely understand or trust them
though, so more investigation is on-going.
To aid my understanding of the performance impact of the new SROA now
that it runs throughout the optimization pipeline, I'm enabling it by
default in this commit, and will disable it again once the LNT bots have
picked up one iteration with it. I want to get those bots (which are
much more stable) to evaluate the impact of the change before I jump to
any conclusions.
NOTE: Several Clang tests will fail because they run -O3 and check the
result's order of output. They'll go back to passing once I disable it
again.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163965 91177308-0d34-0410-b5e6-96231b3b80d8
use load/store fragments defined in TargetSelectionDAG.td in place of them.
Unaligned loads/stores are either expanded or lowered to target-specific nodes,
so instruction selection should see only aligned load/store nodes.
No changes in functionality.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163960 91177308-0d34-0410-b5e6-96231b3b80d8
destination.
Updated previous implementation to fix a case not covered:
// PBI: br i1 %x, TrueDest, BB
// BI: br i1 %y, TrueDest, FalseDest
The other case was handled correctly.
// PBI: br i1 %x, BB, FalseDest
// BI: br i1 %y, TrueDest, FalseDest
Also tried to use 64-bit arithmetic instead of APInt with scale to simplify the
computation. Let me know if you have other opinions about this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163954 91177308-0d34-0410-b5e6-96231b3b80d8
- The current_pos function is supposed to return all the written bytes, not the
current position of the underlying stream.
- This caused tell() to be broken whenever the underlying stream had buffered
content.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163948 91177308-0d34-0410-b5e6-96231b3b80d8
This models the A9 processor at the level of instruction operands, as
opposed to the itinerary, which models each operation at the level of
pipeline stages.
The two primary motivations are:
1) Allow MachineScheduler to model A9 as an out-of-order processor. It
can now distinguish between hazards that force interlocking vs.
buffered resources.
2) Reduce long-term maintenance by allowing the itinerary and target
hooks to eventually be removed. Note that almost all of the complexity
in the new model exists to model instruction variants, which the
itinerary cannot handle. Instead the scheduler previously relied on
processor-specific target hooks which are incomplete and buggy.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163921 91177308-0d34-0410-b5e6-96231b3b80d8
the default target of the first switch is not the basic block the second switch
is in (PredDefault != BB).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163916 91177308-0d34-0410-b5e6-96231b3b80d8
This patch introduces a possibility for Hexagon MI scheduler
to perform some target specific post- processing on the scheduling
DAG prior to scheduling.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163903 91177308-0d34-0410-b5e6-96231b3b80d8
* wrap code blocks in \code ... \endcode;
* refer to parameter names in paragraphs correctly (\arg is not what most
people want -- it starts a new paragraph);
* use \param instead of \arg to document parameters in order to be consistent
with the rest of the codebase.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163902 91177308-0d34-0410-b5e6-96231b3b80d8
