This is not just a matter of passing in the target triple from the module;
currently backends are making decisions based on the build and host
architecture. The goal is to migrate to making these decisions based off of the
triple (in conjunction with the feature string). Thus most clients pass in the
target triple, or the host triple if that is empty.
This has one important change in the way behavior of the JIT and llc.
For the JIT, it was previously selecting the Target based on the host
(naturally), but it was setting the target machine features based on the triple
from the module. Now it is setting the target machine features based on the
triple of the host.
For LLC, -march was previously only used to select the target, the target
machine features were initialized from the module's triple (which may have been
empty). Now the target triple is taken from the module, or the host's triple is
used if that is empty. Then the triple is adjusted to match -march.
The take away is that -march for llc is now used in conjunction with the host
triple to initialize the subtarget. If users want more deterministic behavior
from llc, they should use -mtriple, or set the triple in the input module.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77946 91177308-0d34-0410-b5e6-96231b3b80d8
there is no new block added to the free list. Therefore on the next
startFunctionBody call, a new slab must be allocated.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77520 91177308-0d34-0410-b5e6-96231b3b80d8
- Instead of requiring targets to define a JIT quality match function, we just
have them specify if they support a JIT.
- Target selection for the JIT just gets the host triple and looks for the best
target which matches the triple and has a JIT.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77060 91177308-0d34-0410-b5e6-96231b3b80d8
- Some clients which used DOUT have moved to DEBUG. We are deprecating the
"magic" DOUT behavior which avoided calling printing functions when the
statement was disabled. In addition to being unnecessary magic, it had the
downside of leaving code in -Asserts builds, and of hiding potentially
unnecessary computations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77019 91177308-0d34-0410-b5e6-96231b3b80d8
out of memory, and also make the default memory manager allocate more memory
when it runs out.
Also, switch function stubs and global data over to using the BumpPtrAllocator.
This makes it so the JIT no longer mmaps (or the equivalent on Windows) 16 MB
of memory, and instead allocates in 512K slabs. I suspect this size could go
lower, especially on embedded platforms, now that more slabs can be allocated.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@76828 91177308-0d34-0410-b5e6-96231b3b80d8
call to the MachineCodeEmitter interface and made copying the start
line of a function not conditional on whether we're emitting Dwarf
debug information. I'll propagate the processDebugLoc() calls to the
non-X86 targets in a followup patch.
In the long run, it'll probably be better to gather this information
through the DwarfWriter, but the DwarfWriter currently depends on the
AsmPrinter and TargetAsmInfo, and fixing that would be out of the way
for this patch.
There's a bug in OProfile 0.9.4 that makes it ignore line numbers for
addresses above 4G, and a patch fixing it at
http://thread.gmane.org/gmane.linux.oprofile/7634
Sample output:
$ sudo opcontrol --reset; sudo opcontrol --start-daemon; sudo opcontrol --start; `pwd`/Debug/bin/lli fib.bc; sudo opcontrol --stop
Signalling daemon... done
Profiler running.
fib(40) == 165580141
Stopping profiling.
$ opreport -g -d -l `pwd`/Debug/bin/lli|head -60
Overflow stats not available
CPU: Core 2, speed 1998 MHz (estimated)
Counted CPU_CLK_UNHALTED events (Clock cycles when not halted) with a unit mask of 0x00 (Unhalted core cycles) count 100000
vma samples % linenr info image name symbol name
00007f67a30370b0 25489 61.2554 fib.c:24 10946.jo fib_left
00007f67a30370b0 1634 6.4106 fib.c:24
00007f67a30370b1 83 0.3256 fib.c:24
00007f67a30370b9 1997 7.8348 fib.c:24
00007f67a30370c6 2080 8.1604 fib.c:27
00007f67a30370c8 988 3.8762 fib.c:27
00007f67a30370cd 1315 5.1591 fib.c:27
00007f67a30370cf 251 0.9847 fib.c:27
00007f67a30370d3 1191 4.6726 fib.c:27
00007f67a30370d6 975 3.8252 fib.c:27
00007f67a30370db 1010 3.9625 fib.c:27
00007f67a30370dd 242 0.9494 fib.c:27
00007f67a30370e1 2782 10.9145 fib.c:28
00007f67a30370e5 3768 14.7828 fib.c:28
00007f67a30370eb 615 2.4128 (no location information)
00007f67a30370f3 6558 25.7287 (no location information)
00007f67a3037100 15603 37.4973 fib.c:29 10946.jo fib_right
00007f67a3037100 1646 10.5493 fib.c:29
00007f67a3037101 45 0.2884 fib.c:29
00007f67a3037109 2372 15.2022 fib.c:29
00007f67a3037116 2234 14.3178 fib.c:32
00007f67a3037118 612 3.9223 fib.c:32
00007f67a303711d 622 3.9864 fib.c:32
00007f67a303711f 385 2.4675 fib.c:32
00007f67a3037123 404 2.5892 fib.c:32
00007f67a3037126 634 4.0633 fib.c:32
00007f67a303712b 870 5.5759 fib.c:32
00007f67a303712d 62 0.3974 fib.c:32
00007f67a3037131 1848 11.8439 fib.c:33
00007f67a3037135 2840 18.2016 fib.c:33
00007f67a303713a 1 0.0064 fib.c:33
00007f67a303713b 1023 6.5564 (no location information)
00007f67a3037143 5 0.0320 (no location information)
000000000080c1e4 15 0.0360 MachineOperand.h:150 lli llvm::MachineOperand::isReg() const
000000000080c1e4 6 40.0000 MachineOperand.h:150
000000000080c1ec 2 13.3333 MachineOperand.h:150
...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@76102 91177308-0d34-0410-b5e6-96231b3b80d8
--- Reverse-merging r75799 into '.':
U test/Analysis/PointerTracking
U include/llvm/Target/TargetMachineRegistry.h
U include/llvm/Target/TargetMachine.h
U include/llvm/Target/TargetRegistry.h
U include/llvm/Target/TargetSelect.h
U tools/lto/LTOCodeGenerator.cpp
U tools/lto/LTOModule.cpp
U tools/llc/llc.cpp
U lib/Target/PowerPC/PPCTargetMachine.h
U lib/Target/PowerPC/AsmPrinter/PPCAsmPrinter.cpp
U lib/Target/PowerPC/PPCTargetMachine.cpp
U lib/Target/PowerPC/PPC.h
U lib/Target/ARM/ARMTargetMachine.cpp
U lib/Target/ARM/AsmPrinter/ARMAsmPrinter.cpp
U lib/Target/ARM/ARMTargetMachine.h
U lib/Target/ARM/ARM.h
U lib/Target/XCore/XCoreTargetMachine.cpp
U lib/Target/XCore/XCoreTargetMachine.h
U lib/Target/PIC16/PIC16TargetMachine.cpp
U lib/Target/PIC16/PIC16TargetMachine.h
U lib/Target/Alpha/AsmPrinter/AlphaAsmPrinter.cpp
U lib/Target/Alpha/AlphaTargetMachine.cpp
U lib/Target/Alpha/AlphaTargetMachine.h
U lib/Target/X86/X86TargetMachine.h
U lib/Target/X86/X86.h
U lib/Target/X86/AsmPrinter/X86ATTAsmPrinter.h
U lib/Target/X86/AsmPrinter/X86AsmPrinter.cpp
U lib/Target/X86/AsmPrinter/X86IntelAsmPrinter.h
U lib/Target/X86/X86TargetMachine.cpp
U lib/Target/MSP430/MSP430TargetMachine.cpp
U lib/Target/MSP430/MSP430TargetMachine.h
U lib/Target/CppBackend/CPPTargetMachine.h
U lib/Target/CppBackend/CPPBackend.cpp
U lib/Target/CBackend/CTargetMachine.h
U lib/Target/CBackend/CBackend.cpp
U lib/Target/TargetMachine.cpp
U lib/Target/IA64/IA64TargetMachine.cpp
U lib/Target/IA64/AsmPrinter/IA64AsmPrinter.cpp
U lib/Target/IA64/IA64TargetMachine.h
U lib/Target/IA64/IA64.h
U lib/Target/MSIL/MSILWriter.cpp
U lib/Target/CellSPU/SPUTargetMachine.h
U lib/Target/CellSPU/SPU.h
U lib/Target/CellSPU/AsmPrinter/SPUAsmPrinter.cpp
U lib/Target/CellSPU/SPUTargetMachine.cpp
U lib/Target/Mips/AsmPrinter/MipsAsmPrinter.cpp
U lib/Target/Mips/MipsTargetMachine.cpp
U lib/Target/Mips/MipsTargetMachine.h
U lib/Target/Mips/Mips.h
U lib/Target/Sparc/AsmPrinter/SparcAsmPrinter.cpp
U lib/Target/Sparc/SparcTargetMachine.cpp
U lib/Target/Sparc/SparcTargetMachine.h
U lib/ExecutionEngine/JIT/TargetSelect.cpp
U lib/Support/TargetRegistry.cpp
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75820 91177308-0d34-0410-b5e6-96231b3b80d8
- They still use the TargetMachineRegistry to populate the contents of the
-march option (via the listener interface). We can't just populate it in the
option parser because we can't expect the TargetRegistry to be populated yet
(we no longer rely on static constructors).
- There are a couple ways to finish killing off TargetMachineRegistry, but I
haven't figured out the cleanest one yet...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75773 91177308-0d34-0410-b5e6-96231b3b80d8
This adds location info for all llvm_unreachable calls (which is a macro now) in
!NDEBUG builds.
In NDEBUG builds location info and the message is off (it only prints
"UREACHABLE executed").
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75640 91177308-0d34-0410-b5e6-96231b3b80d8
Make llvm_unreachable take an optional string, thus moving the cerr<< out of
line.
LLVM_UNREACHABLE is now a simple wrapper that makes the message go away for
NDEBUG builds.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75379 91177308-0d34-0410-b5e6-96231b3b80d8
library to tell it the addresses of JITted functions. For a
particular program, this changes the opreport -l output from:
samples % image name symbol name
48182 98.9729 anon (tgid:19412 range:0x7f12ccaab000-0x7f12cdaab000) anon (tgid:19412 range:0x7f12ccaab000-0x7f12cdaab000)
11 0.0226 libstdc++.so.6.0.9 /usr/lib/libstdc++.so.6.0.9
to:
samples % image name symbol name
24565 60.7308 19814.jo fib_left
15365 37.9861 19814.jo fib_right
22 0.0544 ld-2.7.so do_lookup_x
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75279 91177308-0d34-0410-b5e6-96231b3b80d8
default, this option is not enabled to support clients who rely on
this behavior.
Fixes http://llvm.org/PR4483
A patch to allocate additional memory for globals after we run out is
forthcoming.
Patch by Reid Kleckner!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75059 91177308-0d34-0410-b5e6-96231b3b80d8
This will replace exit()/abort() style error handling with an API
that allows clients to register custom error handling hooks.
The default is to call exit(1) when no error handler is provided.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74922 91177308-0d34-0410-b5e6-96231b3b80d8
emitted or the machine code for a function is freed. Chris mentioned that we
may also want a notification when a stub is emitted, but that'll be a future
change. I intend to use this to tell oprofile where functions are emitted and
what lines correspond to what addresses.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74157 91177308-0d34-0410-b5e6-96231b3b80d8
libraries instead of relinked objects, the interpreter, JIT, and native
target libraries were not being linked in to an ocaml program using the
ExecutionEngine.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74117 91177308-0d34-0410-b5e6-96231b3b80d8
integer and floating-point opcodes, introducing
FAdd, FSub, and FMul.
For now, the AsmParser, BitcodeReader, and IRBuilder all preserve
backwards compatability, and the Core LLVM APIs preserve backwards
compatibility for IR producers. Most front-ends won't need to change
immediately.
This implements the first step of the plan outlined here:
http://nondot.org/sabre/LLVMNotes/IntegerOverflow.txt
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72897 91177308-0d34-0410-b5e6-96231b3b80d8
Introduce a new class (MachineCodeInfo) that the JIT can fill in with details. Right now, just the address and the size of the machine code are reported.
Patch by Evan Phoenix!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72040 91177308-0d34-0410-b5e6-96231b3b80d8
an optimization level instead of a simple boolean telling it to generate code
"fast" or the other type of "fast".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70347 91177308-0d34-0410-b5e6-96231b3b80d8
another stub, but then never calling the jitted function) can cause the JIT to
leave a stub in place. Judging by the comments this is a known deficiency, so
we're just not going to use AssertingVH for the StubToFunctionTy map.
Also shorten some lines longer than 80 columns.
This fixes the "make check" failure with ocaml on x86-64 linux.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70185 91177308-0d34-0410-b5e6-96231b3b80d8
locks must be matched with unlocks. Also, use calloc to allocate the
block so that it is properly zero'd. Thanks to Nick Kledzik for
tracking this down.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@69314 91177308-0d34-0410-b5e6-96231b3b80d8
is appropriate. This helps visually differentiate host-oriented
calculations from target-oriented calculations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@68227 91177308-0d34-0410-b5e6-96231b3b80d8
1. ConstantPoolSDNode alignment field is log2 value of the alignment requirement. This is not consistent with other SDNode variants.
2. MachineConstantPool alignment field is also a log2 value.
3. However, some places are creating ConstantPoolSDNode with alignment value rather than log2 values. This creates entries with artificially large alignments, e.g. 256 for SSE vector values.
4. Constant pool entry offsets are computed when they are created. However, asm printer group them by sections. That means the offsets are no longer valid. However, asm printer uses them to determine size of padding between entries.
5. Asm printer uses expensive data structure multimap to track constant pool entries by sections.
6. Asm printer iterate over SmallPtrSet when it's emitting constant pool entries. This is non-deterministic.
Solutions:
1. ConstantPoolSDNode alignment field is changed to keep non-log2 value.
2. MachineConstantPool alignment field is also changed to keep non-log2 value.
3. Functions that create ConstantPool nodes are passing in non-log2 alignments.
4. MachineConstantPoolEntry no longer keeps an offset field. It's replaced with an alignment field. Offsets are not computed when constant pool entries are created. They are computed on the fly in asm printer and JIT.
5. Asm printer uses cheaper data structure to group constant pool entries.
6. Asm printer compute entry offsets after grouping is done.
7. Change JIT code to compute entry offsets on the fly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@66875 91177308-0d34-0410-b5e6-96231b3b80d8
allocating memory in the JIT. This is insanely inefficient, but
hey, most people implement their own memory managers anyway.
Patch by Eric Yew!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@66472 91177308-0d34-0410-b5e6-96231b3b80d8
and extern_weak_odr. These are the same as the non-odr versions,
except that they indicate that the global will only be overridden
by an *equivalent* global. In C, a function with weak linkage can
be overridden by a function which behaves completely differently.
This means that IP passes have to skip weak functions, since any
deductions made from the function definition might be wrong, since
the definition could be replaced by something completely different
at link time. This is not allowed in C++, thanks to the ODR
(One-Definition-Rule): if a function is replaced by another at
link-time, then the new function must be the same as the original
function. If a language knows that a function or other global can
only be overridden by an equivalent global, it can give it the
weak_odr linkage type, and the optimizers will understand that it
is alright to make deductions based on the function body. The
code generators on the other hand map weak and weak_odr linkage
to the same thing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@66339 91177308-0d34-0410-b5e6-96231b3b80d8
1. When the JIT is asked to remove a function, updating it's
mapping to 0, we invalidate any function stubs used only
by that function. Now, also invalidate the JIT's mapping
from the GV the stub pointed to, to the address of the GV.
2. When dlsym stubs for cross-process JIT are enabled, do not
abort just because a named function cannot be found in the
JIT's process.
3. Fix various assumptions about when it is ok to use the lazy
resolver when non-lazy JITing is enabled.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@66324 91177308-0d34-0410-b5e6-96231b3b80d8
This invalidates the stubs in the resolver map when they are no longer referenced,
and should the JIT memory manager ever pick up a deallocateStub interface, the
JIT could reclaim the memory for unused stubs as well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@66141 91177308-0d34-0410-b5e6-96231b3b80d8
on failure to resolve it.
Do not abort on failure to resolve an external symbol when using dlsym stubs,
since the symbol may not be in the JIT's address space. Just use 0.
Allow dlsym stubs to differentiate between GlobalVars and Functions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@66050 91177308-0d34-0410-b5e6-96231b3b80d8
that has not been JIT'd yet, the callee is put on a list of pending functions
to JIT. The call is directed through a stub, which is updated with the address
of the function after it has been JIT'd. A new interface for allocating and
updating empty stubs is provided.
Add support for removing the ModuleProvider the JIT was created with, which
would otherwise invalidate the JIT's PassManager, which is initialized with the
ModuleProvider's Module.
Add support under a new ExecutionEngine flag for emitting the infomration
necessary to update Function and GlobalVariable stubs after JITing them, by
recording the address of the stub and the name of the GlobalValue. This allows
code to be copied from one address space to another, where libraries may live
at different virtual addresses, and have the stubs updated with their new
correct target addresses.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@64906 91177308-0d34-0410-b5e6-96231b3b80d8
there.
This changes the interpreter to use libffi. After this patch, the interpreter
will barely be able to call any external functions if built on a system without
libffi installed (just enough to pass 'make check' really). But with libffi,
we can now call any function that isn't variadic or taking a struct or vector
parameter (but pointer to struct is fine). Patch by Alexei Svitkine!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63723 91177308-0d34-0410-b5e6-96231b3b80d8
This requires a rebuild of 'configure' itself. I will be committing that next, but
built with the wrong version of autoconf. Somebody who has the right one, please update
it.
As a side-note, because of the way autoconf works, all built tools will link against
libffi, not just lli. If you know how to fix this, please let me know ...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@62553 91177308-0d34-0410-b5e6-96231b3b80d8
Split Support/Registry.h into two files so that we have less to
recompile every time CommandLine.h is changed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@62312 91177308-0d34-0410-b5e6-96231b3b80d8
SingleSource/UnitTests/2007-04-25-weak.c in JIT mode. The test
now passes on systems which are able to produce a correct
reference output to compare with.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61674 91177308-0d34-0410-b5e6-96231b3b80d8
This is a short term workaround. The current solution is for the JIT memory manager to manage code and data memory separately.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58688 91177308-0d34-0410-b5e6-96231b3b80d8
Since the ARM constant pool handling supercedes the standard LLVM constant
pool entirely, the JIT emitter does not allocate space for the constants,
nor initialize the memory. The constant pool is considered part of the
instruction stream.
Likewise, when resolving relocations into the constant pool, a hook into
the target back end is used to resolve from the constant ID# to the
address where the constant is stored.
For now, the support in the ARM emitter is limited to 32-bit integer. Future
patches will expand this to the full range of constants necessary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58338 91177308-0d34-0410-b5e6-96231b3b80d8
variable is moved to the execution engine. The JIT calls the TargetJITInfo
to allocate thread local storage. Currently, only linux/x86 knows how to
allocate thread local global variables.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58142 91177308-0d34-0410-b5e6-96231b3b80d8
this handling to work properly for modifying stub functions, relocations
back to entry points after JIT compilation, etc..
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57013 91177308-0d34-0410-b5e6-96231b3b80d8
s/ParamAttr/Attribute/g
s/PAList/AttrList/g
s/FnAttributeWithIndex/AttributeWithIndex/g
s/FnAttr/Attribute/g
This sets the stage
- to implement function notes as function attributes and
- to distinguish between function attributes and return value attributes.
This requires corresponding changes in llvm-gcc and clang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56622 91177308-0d34-0410-b5e6-96231b3b80d8
whose darwin code was written after the ability to dynamically register frames,
we need to do special hacks to make things work.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55507 91177308-0d34-0410-b5e6-96231b3b80d8
Also skip indirect encoding for platforms that ask for one: we direclty
write an address, not a pointer to the address.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54987 91177308-0d34-0410-b5e6-96231b3b80d8
model, except for external calls; this makes
addressing modes PC-relative. Incomplete.
The assertion at the top of Emitter::runOnMachineFunction
was obviously bogus (always true) so I removed it.
If someone knows what the correct test should be to cover
all the various targets, please fix.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54656 91177308-0d34-0410-b5e6-96231b3b80d8
Evan broke it in r54523 by adding a parameter in the implementation without
updating the header correspondingly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54555 91177308-0d34-0410-b5e6-96231b3b80d8
are allocated in the same buffer as the code,
jump tables, etc.
The default JIT memory manager does not handle buffer
overflow well. I didn't introduce this and I'm not
attempting to fix it here, but it is more likely to
be hit now since we're putting more stuff in the
buffer. This affects one test that I know of so far,
MultiSource/Benchmarks/NPB-serial/is.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54442 91177308-0d34-0410-b5e6-96231b3b80d8
the need for a flavor operand, and add a new SDNode subclass,
LabelSDNode, for use with them to eliminate the need for a label id
operand.
Change instruction selection to let these label nodes through
unmodified instead of creating copies of them. Teach the MachineInstr
emitter how to emit a MachineInstr directly from an ISD label node.
This avoids the need for allocating SDNodes for the label id and
flavor value, as well as SDNodes for each of the post-isel label,
label id, and label flavor.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52943 91177308-0d34-0410-b5e6-96231b3b80d8
InvalidateInstructionCache method instead of calling through
a hook on the JIT. This is a host feature, not a target feature.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52734 91177308-0d34-0410-b5e6-96231b3b80d8
1. The "JITState" object creates a PassManager with the ModuleProvider that the
jit is created with. If the ModuleProvider is removed and deleted, the
PassManager is invalid.
2. The Global maps in the JIT were not invalidated with a ModuleProvider was
removed. This could lead to a case where the Module would be freed, and a
new Module with Globals at the same addresses could return invalid results.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51384 91177308-0d34-0410-b5e6-96231b3b80d8
are represented as "weak", but there are subtle differences
in some cases on Darwin, so we need both. The intent
is that "common" will behave identically to "weak" unless
somebody changes their target to do something else.
No functional change as yet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51118 91177308-0d34-0410-b5e6-96231b3b80d8
several things that were neither in an anonymous namespace nor static
but not intended to be global.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51017 91177308-0d34-0410-b5e6-96231b3b80d8
function has already been codegen'd. This is required by the Java class loading
mechanism which executes Java code when materializing a function.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@49988 91177308-0d34-0410-b5e6-96231b3b80d8
Specifically, introduction of XXX::Create methods
for Users that have a potentially variable number of
Uses.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@49277 91177308-0d34-0410-b5e6-96231b3b80d8
tools. This is currently only enabled on the mac, but could easily be
supported by other hosts that are interested.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@49207 91177308-0d34-0410-b5e6-96231b3b80d8
was actually passing a completely incorrect size to sys_icache_invalidate.
Instead of having the JITEmitter do this (which doesn't have the correct
size), just make the target sync its own stubs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46354 91177308-0d34-0410-b5e6-96231b3b80d8
for non-function GV relocations that require function address stubs (e.g. Mac OS X in non-static mode).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45527 91177308-0d34-0410-b5e6-96231b3b80d8
endianness of the target not of the host. Done by the
simple expedient of reversing bytes for primitive types
if the host and target endianness don't match. This is
correct for integer and pointer types. I don't know if
it is correct for floating point types.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45039 91177308-0d34-0410-b5e6-96231b3b80d8
put it in a new header System/Host.h instead.
Instead of getting the endianness from configure,
calculate it directly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44959 91177308-0d34-0410-b5e6-96231b3b80d8
using the minimum possible number of bytes. For little
endian targets run on little endian machines, apints are
stored in memory from LSB to MSB as before. For big endian
targets on big endian machines they are stored from MSB to
LSB which wasn't always the case before (if the target and
host endianness doesn't match values are stored according
to the host's endianness). Doing this requires knowing the
endianness of the host, which is determined when configuring -
thanks go to Anton for this. Only having access to little
endian machines I was unable to properly test the big endian
part, which is also the most complicated...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44796 91177308-0d34-0410-b5e6-96231b3b80d8
to create a JIT. This lets you specify JIT-specific configuration items
like the JITMemoryManager to use.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44647 91177308-0d34-0410-b5e6-96231b3b80d8
in this call:
Result.IntVal = APInt(80, 2, x);
What is x?
uint16_t x[8];
I deduce that the APInt constructor being used is this one:
APInt(uint32_t numBits, uint64_t val, bool isSigned = false);
rather than this one:
APInt(uint32_t numBits, uint32_t numWords, const uint64_t bigVal[]);
That doesn't seem right! This fix compiles but is otherwise completely
untested.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44400 91177308-0d34-0410-b5e6-96231b3b80d8
The meaning of getTypeSize was not clear - clarifying it is important
now that we have x86 long double and arbitrary precision integers.
The issue with long double is that it requires 80 bits, and this is
not a multiple of its alignment. This gives a primitive type for
which getTypeSize differed from getABITypeSize. For arbitrary precision
integers it is even worse: there is the minimum number of bits needed to
hold the type (eg: 36 for an i36), the maximum number of bits that will
be overwriten when storing the type (40 bits for i36) and the ABI size
(i.e. the storage size rounded up to a multiple of the alignment; 64 bits
for i36).
This patch removes getTypeSize (not really - it is still there but
deprecated to allow for a gradual transition). Instead there is:
(1) getTypeSizeInBits - a number of bits that suffices to hold all
values of the type. For a primitive type, this is the minimum number
of bits. For an i36 this is 36 bits. For x86 long double it is 80.
This corresponds to gcc's TYPE_PRECISION.
(2) getTypeStoreSizeInBits - the maximum number of bits that is
written when storing the type (or read when reading it). For an
i36 this is 40 bits, for an x86 long double it is 80 bits. This
is the size alias analysis is interested in (getTypeStoreSize
returns the number of bytes). There doesn't seem to be anything
corresponding to this in gcc.
(3) getABITypeSizeInBits - this is getTypeStoreSizeInBits rounded
up to a multiple of the alignment. For an i36 this is 64, for an
x86 long double this is 96 or 128 depending on the OS. This is the
spacing between consecutive elements when you form an array out of
this type (getABITypeSize returns the number of bytes). This is
TYPE_SIZE in gcc.
Since successive elements in a SequentialType (arrays, pointers
and vectors) need to be aligned, the spacing between them will be
given by getABITypeSize. This means that the size of an array
is the length times the getABITypeSize. It also means that GEP
computations need to use getABITypeSize when computing offsets.
Furthermore, if an alloca allocates several elements at once then
these too need to be aligned, so the size of the alloca has to be
the number of elements multiplied by getABITypeSize. Logically
speaking this doesn't have to be the case when allocating just
one element, but it is simpler to also use getABITypeSize in this
case. So alloca's and mallocs should use getABITypeSize. Finally,
since gcc's only notion of size is that given by getABITypeSize, if
you want to output assembler etc the same as gcc then getABITypeSize
is the size you want.
Since a store will overwrite no more than getTypeStoreSize bytes,
and a read will read no more than that many bytes, this is the
notion of size appropriate for alias analysis calculations.
In this patch I have corrected all type size uses except some of
those in ScalarReplAggregates, lib/Codegen, lib/Target (the hard
cases). I will get around to auditing these too at some point,
but I could do with some help.
Finally, I made one change which I think wise but others might
consider pointless and suboptimal: in an unpacked struct the
amount of space allocated for a field is now given by the ABI
size rather than getTypeStoreSize. I did this because every
other place that reserves memory for a type (eg: alloca) now
uses getABITypeSize, and I didn't want to make an exception
for unpacked structs, i.e. I did it to make things more uniform.
This only effects structs containing long doubles and arbitrary
precision integers. If someone wants to pack these types more
tightly they can always use a packed struct.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43620 91177308-0d34-0410-b5e6-96231b3b80d8