instructions from the relevant shuffle patterns.
This is the last tweak I'm aware of to generate essentially perfect
v4f32 and v2f64 shuffles with the new vector shuffle lowering up through
SSE4.1. I'm sure I've missed some and it'd be nice to check since v4f32
is amenable to exhaustive exploration, but this is all of the tricks I'm
aware of.
With AVX there is a new trick to use the VPERMILPS instruction, that's
coming up in a subsequent patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217761 91177308-0d34-0410-b5e6-96231b3b80d8
instructions when it finds an appropriate pattern.
These are lovely instructions, and its a shame to not use them. =] They
are fast, and can hand loads folded into their operands, etc.
I've also plumbed the comment shuffle decoding through the various
layers so that the test cases are printed nicely.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217758 91177308-0d34-0410-b5e6-96231b3b80d8
AVX is available, and generally tidy up things surrounding UNPCK
formation.
Originally, I was thinking that the only advantage of PSHUFD over UNPCK
instruction variants was its free copy, and otherwise we should use the
shorter encoding UNPCK instructions. This isn't right though, there is
a larger advantage of being able to fold a load into the operand of
a PSHUFD. For UNPCK, the operand *must* be in a register so it can be
the second input.
This removes the UNPCK formation in the target-specific DAG combine for
v4i32 shuffles. It also lifts the v8 and v16 cases out of the
AVX-specific check as they are potentially replacing multiple
instructions with a single instruction and so should always be valuable.
The floating point checks are simplified accordingly.
This also adjusts the formation of PSHUFD instructions to attempt to
match the shuffle mask to one which would fit an UNPCK instruction
variant. This was originally motivated to allow it to match the UNPCK
instructions in the combiner, but clearly won't now.
Eventually, we should add a MachineCombiner pass that can form UNPCK
instructions post-RA when the operand is known to be in a register and
thus there is no loss.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217755 91177308-0d34-0410-b5e6-96231b3b80d8
'punpckhwd' instructions when suitable rather than falling back to the
generic algorithm.
While we could canonicalize to these patterns late in the process, that
wouldn't help when the freedom to use them is only visible during
initial lowering when undef lanes are well understood. This, it turns
out, is very important for matching the shuffle patterns that are used
to lower sign extension. Fixes a small but relevant regression in
gcc-loops with the new lowering.
When I changed this I noticed that several 'pshufd' lowerings became
unpck variants. This is bad because it removes the ability to freely
copy in the same instruction. I've adjusted the widening test to handle
undef lanes correctly and now those will correctly continue to use
'pshufd' to lower. However, this caused a bunch of churn in the test
cases. No functional change, just churn.
Both of these changes are part of addressing a general weakness in the
new lowering -- it doesn't sufficiently leverage undef lanes. I've at
least a couple of patches that will help there at least in an academic
sense.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217752 91177308-0d34-0410-b5e6-96231b3b80d8
These are super simple. They even take precedence over crazy
instructions like INSERTPS because they have very high throughput on
modern x86 chips.
I still have to teach the integer shuffle variants about this to avoid
so many domain crossings. However, due to the particular instructions
available, that's a touch more complex and so a separate patch.
Also, the backend doesn't seem to realize it can commute blend
instructions by negating the mask. That would help remove a number of
copies here. Suggestions on how to do this welcome, it's an area I'm
less familiar with.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217744 91177308-0d34-0410-b5e6-96231b3b80d8
support transforming the forms from the new vector shuffle lowering to
use 'movddup' when appropriate.
A bunch of the cases where we actually form 'movddup' don't actually
show up in the test results because something even later than DAG
legalization maps them back to 'unpcklpd'. If this shows back up as
a performance problem, I'll probably chase it down, but it is at least
an encoded size loss. =/
To make this work, also always do this canonicalizing step for floating
point vectors where the baseline shuffle instructions don't provide any
free copies of their inputs. This also causes us to canonicalize
unpck[hl]pd into mov{hl,lh}ps (resp.) which is a nice encoding space
win.
There is one test which is "regressed" by this: extractelement-load.
There, the test case where the optimization it is testing *fails*, the
exact instruction pattern which results is slightly different. This
should probably be fixed by having the appropriate extract formed
earlier in the DAG, but that would defeat the purpose of the test.... If
this test case is critically important for anyone, please let me know
and I'll try to work on it. The prior behavior was actually contrary to
the comment in the test case and seems likely to have been an accident.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217738 91177308-0d34-0410-b5e6-96231b3b80d8
... Just make sure we check uses first so we see the kill first. It
turns out ignoring defs gives some pretty nasty runtime failures.
I'm certain this is the fix but I'm still reducing a testcase.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217735 91177308-0d34-0410-b5e6-96231b3b80d8
Extend the logical ops selection to also support non-native types such as i1,
i8, and i16.
Fixes rdar://problem/18330589.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217732 91177308-0d34-0410-b5e6-96231b3b80d8
Vector MUL/MLAs have tied operands, which gives us extra constraints
that we currently can't handle. Instead of silently doing the wrong
thing, remove support to be readded later properly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217690 91177308-0d34-0410-b5e6-96231b3b80d8
Defs are seen before uses, so a def without the kill flag doesn't necessarily
mean that the register is not killed on that instruction. It may be killed
in a later use operand.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217689 91177308-0d34-0410-b5e6-96231b3b80d8
Cross-class copies being expensive is actually a trait of the microarchitecture, but as I haven't yet seen an example of a microarchitecture where they're cheap it seems best to just enable this by default, covering the non-mcpu build case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217674 91177308-0d34-0410-b5e6-96231b3b80d8
Inline asm may specify 'U' and 'X' constraints to print a 'u' for an
update-form memory reference, or an 'x' for an indexed-form memory
reference. However, these are really only useful in GCC internal code
generation. In inline asm the operand of the memory constraint is
typically just a register containing the address, so 'U' and 'X' make
no sense.
This patch quietly accepts 'U' and 'X' in inline asm patterns, but
otherwise does nothing. If we ever unexpectedly see a non-register,
we'll assert and sort it out afterwards.
I've added a new test for these constraints; the test case should be
used for other asm-constraints changes down the road.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217622 91177308-0d34-0410-b5e6-96231b3b80d8
r189189 implemented AVX512 unpack by essentially performing a 256-bit unpack
between the low and the high 256 bits of src1 into the low part of the
destination and another unpack of the low and high 256 bits of src2 into the
high part of the destination.
I don't think that's how unpack works. AVX512 unpack simply has more 128-bit
lanes but other than it works the same way as AVX. So in each 128-bit lane,
we're always interleaving certain parts of both operands rather different
parts of one of the operands.
E.g. for this:
__v16sf a = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 };
__v16sf b = { 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31 };
__v16sf c = __builtin_shufflevector(a, b, 0, 8, 1, 9, 4, 12, 5, 13, 16,
24, 17, 25, 20, 28, 21, 29);
we generated punpcklps (notice how the elements of a and b are not interleaved
in the shuffle). In turn, c was set to this:
0 16 1 17 4 20 5 21 8 24 9 25 12 28 13 29
Obviously this should have just returned the mask vector of the shuffle
vector.
I mostly reverted this change and made sure the original AVX code worked
for 512-bit vectors as well.
Also updated the tests because they matched the logic from the code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217602 91177308-0d34-0410-b5e6-96231b3b80d8
Refactored the R600_LDS_1A2D class a bit to get it to actually work.
It seemed to be previously unused and broken.
We also have to disable the conversion to the noret variant for now in
R600ISelLowering because the getLDSNoRetOp method only handles 1A1D LDS ops.
Someone can feel free to modify the AMDGPU::getLDSNoRetOp method to
work for more than 1A1D variants of LDS operations. It's being left as a
future TODO for now.
Signed-off-by: Aaron Watry <awatry at gmail.com>
Reviewed-by: Matt Arsenault <matthew.arsenault@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217596 91177308-0d34-0410-b5e6-96231b3b80d8
This was only present for SI before.
Cayman may still be missing, but I am unable to test that currently.
v2: Don't create atomicrmw max tests in separate file
Signed-off-by: Aaron Watry <awatry@gmail.com>
Reviewed-by: Matt Arsenault <matthew.arsenault@amd.com>
CC: Tom Stellard <thomas.stellard@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217589 91177308-0d34-0410-b5e6-96231b3b80d8
Need to convert the 64 element offset into bytes, not just the element
size like the normal case instructions.
Noticed by inspection. This can't be hit now because
st64 instructions aren't emitted during instruction selection,
and the post-RA scheduler isn't enabled.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217560 91177308-0d34-0410-b5e6-96231b3b80d8
With this a DataLayoutPass can be reused for multiple modules.
Once we have doInitialization/doFinalization, it doesn't seem necessary to pass
a Module to the constructor.
Overall this change seems in line with the idea of making DataLayout a required
part of Module. With it the only way of having a DataLayout used is to add it
to the Module.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217548 91177308-0d34-0410-b5e6-96231b3b80d8
The increase of the interleave factor to 4 has side-effects
like performance losses eg. due to reminder loops being executed
more frequently and may increase code size. It requires more
analysis and careful heuristic tuning. Expect double digit gains
in small benchmarks like lowercase.c and losses in puzzle.c.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217540 91177308-0d34-0410-b5e6-96231b3b80d8
This adds target specific support for using the PBQP register allocator on the
AArch64, for the A57 cpu.
By default, the PBQP allocator is not used, unless explicitely required
on the command line with "-aarch64-pbqp".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217504 91177308-0d34-0410-b5e6-96231b3b80d8
using static relocation model and small code model.
Summary: currently we generate GOT based relocations for weak symbol
references regardless of the underlying relocation model. This should
be change so that in static relocation model we use a constant pool
load instead.
Patch from: Keith Walker
Reviewers: Renato Golin, Tim Northover
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217503 91177308-0d34-0410-b5e6-96231b3b80d8
The only Thumb-1 multi-store capable of using LR is the PUSH instruction, which
translates to STMDB, so we shouldn't convert STMIAs.
Patch by Sergey Dmitrouk.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217498 91177308-0d34-0410-b5e6-96231b3b80d8
