The SWAP instruction only exists in a 32-bit variant, but the 64-bit
atomic swap can be implemented in terms of CASX, like the other atomic
rmw primitives.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200453 91177308-0d34-0410-b5e6-96231b3b80d8
The .object_arch directive indicates an alternative architecture to be specified
in the object file. The directive does *not* effect the enabled feature bits
for the object file generation. This is particularly useful when the code
performs runtime detection and would like to indicate a lower architecture as
the requirements than the actual instructions used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200451 91177308-0d34-0410-b5e6-96231b3b80d8
.movsp is an ARM unwinding directive that indicates to the unwinder that a
register contains an offset from the current stack pointer. If the offset is
unspecified, it defaults to zero.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200449 91177308-0d34-0410-b5e6-96231b3b80d8
This enhances the ARMAsmParser to handle .tlsdescseq directives. This is a
slightly special relocation. We must be able to generate them, but not consume
them in assembly. The relocation is meant to assist the linker in generating a
TLS descriptor sequence. The ELF target streamer is enhanced to append
additional fixups into the current segment and that is used to emit the new
R_ARM_TLS_DESCSEQ relocations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200448 91177308-0d34-0410-b5e6-96231b3b80d8
Add support for tlsdesc relocations which are part of the ABI, marked as
experimental. These relocations permit the linker to perform TLS reference
optimizations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200447 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for TLS CALL relocations. TLS CALL relocations are used to
indicate to the linker to generate appropriate entries to resolve TLS references
via an appropriate function invocation (e.g. __tls_get_addr(PLT)).
In order to accomodate the linker relaxation of the TLS access model for the
references (GD/LD -> IE, IE -> LE), the relocation addend must be incomplete.
This requires that the partial inplace value is also incomplete (i.e. 0). We
simply avoid the offset value calculation at the time of the fixup adjustment in
the ARM assembler backend.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200446 91177308-0d34-0410-b5e6-96231b3b80d8
None of the object file formats reported error on iterator increment. In
retrospect, that is not too surprising: no object format stores symbols or
sections in a linked list or other structure that requires chasing pointers.
As a consequence, all error checking can be done on begin() and end().
This reduces the text segment of bin/llvm-readobj in my machine from 521233 to
518526 bytes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200442 91177308-0d34-0410-b5e6-96231b3b80d8
After all hard work to implement the EHABI and with the test-suite
passing, it's time to turn it on by default and allow users to
disable it as a work-around while we fix the eventual bugs that show
up.
This commit also remove the -arm-enable-ehabi-descriptors, since we
want the tables to be printed every time the EHABI is turned on
for non-Darwin ARM targets.
Although MCJIT EHABI is not working yet (needs linking with the right
libraries), this commit also fixes some relocations on MCJIT regarding
the EH tables/lib calls, and update some tests to avoid using EH tables
when none are needed.
The EH tests in the test-suite that were previously disabled on ARM
now pass with these changes, so a follow-up commit on the test-suite
will re-enable them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200388 91177308-0d34-0410-b5e6-96231b3b80d8
Otherwise, assembler (gas) fails to assemble them with error message "operation
combines symbols in different segments". This is because MC computes
pc_rel entries with subtract expression between labels from different sections.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200373 91177308-0d34-0410-b5e6-96231b3b80d8
When the scalar compare is between floating point and operands are
vector, we custom lower SELECT_CC to use NEON SIMD compare for
generating less instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200365 91177308-0d34-0410-b5e6-96231b3b80d8
The subtarget info is explicitly passed to the EncodeInstruction
method and we should use that subtarget info to influence any
encoding decisions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200350 91177308-0d34-0410-b5e6-96231b3b80d8
As opposed to GCC/GAS the default ABI for Mips64 is n64.
Compatibility bit should be set if o32 ABI is used when targeting Mips64.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200332 91177308-0d34-0410-b5e6-96231b3b80d8
The code was missing the case for aggregate parameters and
hence was emitting them as .b0 type. Also fixed a couple
of comments.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200325 91177308-0d34-0410-b5e6-96231b3b80d8
GPRC_NOR0 is not a subclass of GPRC (because it also contains the ZERO pseudo
register). As a result, we also need to check for it in the spilling code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200288 91177308-0d34-0410-b5e6-96231b3b80d8
This avoids miscompiling MS inline asm in LLVM where we have to infer
clobbers. Test case forthcoming in Clang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200279 91177308-0d34-0410-b5e6-96231b3b80d8
Before this patch we used getIntImmCost from TargetTransformInfo to determine if
a load of a constant should be converted to just a constant, but the threshold
for this was set to an arbitrary value. This value works well for the two
targets (X86 and ARM) that implement this target-hook, but it isn't
target-independent at all.
Now targets have the possibility to decide directly if this optimization should
be performed. The default value is set to false to preserve the current
behavior. The target hook has been moved to TargetLowering, which removed the
last use and need of TargetTransformInfo in SelectionDAG.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200271 91177308-0d34-0410-b5e6-96231b3b80d8
code to see if we're emitting a function into a non-default
text section. This is still a less-than-ideal solution, but more
contained than r199871 to determine whether or not we're emitting
code into an array of comdat sections.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200269 91177308-0d34-0410-b5e6-96231b3b80d8
This brings MC into line with GNU 'as' on ARM, and it brings the ARM
target into line with most other LLVM targets, which declare the
initial CFI state with addInitialFrameState().
Without this, functions generated with .cfi_startproc/endproc on ARM
will tend to cause GDB to abort with:
gdb/dwarf2-frame.c:1132: internal-error: Unknown CFA rule.
I've also tested this by comparing the output of "readelf -w" on the
object files produced by llvm-mc and gas when given the .s file added
here.
This change is part of addressing PR18636.
Differential Revision: http://llvm-reviews.chandlerc.com/D2597
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200255 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This commit gives an address mode to the PLD instruction. We
were getting an assertion failure in the frame lowering code
because we had code that was doing a pld of a stack allocated
address. The frame lowering was checking the address mode and
then asserting because pld had none defined.
This commit fixes pld for arm mode. There was a previous fix for
thumb mode in a separate commit. The commit for thumb mode
added a test in a separate file because it would otherwise fail
for arm. This commit moves the thumb test back into the prefetch.ll
file and adds the corresponding arm test.
Differential Revision: http://llvm-reviews.chandlerc.com/D2622
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200248 91177308-0d34-0410-b5e6-96231b3b80d8