My understanding (from reading just the llvm code) is that
* most ppc cpus have a "sync n" instruction and an msync alias that is "sync 0".
* "book e" cpus instead have a msync instruction and not the more
general "sync n"
This patch reflects that in the .td files, allowing a single codepath for
asm ond obj streamer and incidentelly fixes a crash when EmitRawText was
called on a obj streamer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199832 91177308-0d34-0410-b5e6-96231b3b80d8
For PPC64 SVR (and Darwin), the stores that take byval aggregate parameters
from registers into the stack frame had MachinePointerInfo objects with
incorrect offsets. These offsets are relative to the object itself, not to the
stack frame base.
This fixes self hosting on PPC64 when compiling with -enable-aa-sched-mi.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199763 91177308-0d34-0410-b5e6-96231b3b80d8
This will allow it to be called from target independent parts of the main
streamer that don't know if there is a registered target streamer or not. This
in turn will allow targets to perform extra actions at specified points in the
interface: add extra flags for some labels, extra work during finalization, etc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199174 91177308-0d34-0410-b5e6-96231b3b80d8
can be used by both the new pass manager and the old.
This removes it from any of the virtual mess of the pass interfaces and
lets it derive cleanly from the DominatorTreeBase<> template. In turn,
tons of boilerplate interface can be nuked and it turns into a very
straightforward extension of the base DominatorTree interface.
The old analysis pass is now a simple wrapper. The names and style of
this split should match the split between CallGraph and
CallGraphWrapperPass. All of the users of DominatorTree have been
updated to match using many of the same tricks as with CallGraph. The
goal is that the common type remains the resulting DominatorTree rather
than the pass. This will make subsequent work toward the new pass
manager significantly easier.
Also in numerous places things became cleaner because I switched from
re-running the pass (!!! mid way through some other passes run!!!) to
directly recomputing the domtree.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199104 91177308-0d34-0410-b5e6-96231b3b80d8
directory. These passes are already defined in the IR library, and it
doesn't make any sense to have the headers in Analysis.
Long term, I think there is going to be a much better way to divide
these matters. The dominators code should be fully separated into the
abstract graph algorithm and have that put in Support where it becomes
obvious that evn Clang's CFGBlock's can use it. Then the verifier can
manually construct dominance information from the Support-driven
interface while the Analysis library can provide a pass which both
caches, reconstructs, and supports a nice update API.
But those are very long term, and so I don't want to leave the really
confusing structure until that day arrives.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199082 91177308-0d34-0410-b5e6-96231b3b80d8
The target specific parser should return `false' if the target AsmParser handles
the directive, and `true' if the generic parser should handle the directive.
Many of the target specific directive handlers would `return Error' which does
not follow these semantics. This change simply changes the target specific
routines to conform to the semantis of the ParseDirective correctly.
Conformance to the semantics improves diagnostics emitted for the invalid
directives. X86 is taken as a sample to ensure that multiple diagnostics are
not presented for a single error.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199068 91177308-0d34-0410-b5e6-96231b3b80d8
operand into the Value interface just like the core print method is.
That gives a more conistent organization to the IR printing interfaces
-- they are all attached to the IR objects themselves. Also, update all
the users.
This removes the 'Writer.h' header which contained only a single function
declaration.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198836 91177308-0d34-0410-b5e6-96231b3b80d8
are part of the core IR library in order to support dumping and other
basic functionality.
Rename the 'Assembly' include directory to 'AsmParser' to match the
library name and the only functionality left their -- printing has been
in the core IR library for quite some time.
Update all of the #includes to match.
All of this started because I wanted to have the layering in good shape
before I started adding support for printing LLVM IR using the new pass
infrastructure, and commandline support for the new pass infrastructure.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198688 91177308-0d34-0410-b5e6-96231b3b80d8
subsequent changes are easier to review. About to fix some layering
issues, and wanted to separate out the necessary churn.
Also comment and sink the include of "Windows.h" in three .inc files to
match the usage in Memory.inc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198685 91177308-0d34-0410-b5e6-96231b3b80d8
This moves the check up into the parent class so that all targets can use it
without having to copy (and keep in sync) the same error message.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198579 91177308-0d34-0410-b5e6-96231b3b80d8
__builtin_returnaddress requires that the value passed into is be a constant.
However, at -O0 even a constant expression may not be converted to a constant.
Emit an error message intead of crashing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198531 91177308-0d34-0410-b5e6-96231b3b80d8
Before this patch any program that wanted to know the final symbol name of a
GlobalValue had to link with Target.
This patch implements a compromise solution where the mangler uses DataLayout.
This way, any tool that already links with Target (llc, clang) gets the exact
behavior as before and new IR files can be mangled without linking with Target.
With this patch the mangler is constructed with just a DataLayout and DataLayout
is extended to include the information the Mangler needs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198438 91177308-0d34-0410-b5e6-96231b3b80d8
CR logicals (crand, crxor, etc.) on the P7 need to be in the first slot of each
dispatch group. The old itinerary entry was just wrong (but has not mattered
because we don't generate these instructions).
This will matter when, in an upcoming commit, we start generating these
instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198359 91177308-0d34-0410-b5e6-96231b3b80d8
Several of the 64-bit fixed-point instructions with immediate operands were
using the 32-bit (i32) operand nodes instead of the corresponding 64-bit (i64)
operand definitions (u16imm instead of u16imm64, for example).
This error has had no effect so far, but would have caused type-checking
violations with an upcoming change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198356 91177308-0d34-0410-b5e6-96231b3b80d8
The tests for the disassembler were adapted from the encoder tests, and for the
most part, the output from the disassembler matches that encoder-test inputs.
There are some places where more-informative mnemonics could be produced
(notably for the branch instructions), and those cases are noted in the tests
with FIXMEs.
Future work includes:
- Generating more-informative mnemonics when possible (this may also be done
in the printer).
- Remove the dependence on positional "numbered" operand-to-variable mapping
(for both encoding and decoding).
- Internally using 64-bit instruction variants in 64-bit mode (if this turns
out to matter).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197693 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds -f64:32:64 to 32 bit ppc darwin since a f64 inside a
structure are only 32 bit aligned.
The patch also drop -f128:64:128 from all ppc darwin, since f128 is
128 bit aligned.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197574 91177308-0d34-0410-b5e6-96231b3b80d8
The instruction definitions in the PPC backend have a number of variants
defined for the same instruction to represent differences between 64-bit and
32-bit semantics. In order to generate a disassembler for the PPC backend, we
need to mark all but one of these as CodeGen only.
No functionality change intended; this is prep work for PPC disassembly
support.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197535 91177308-0d34-0410-b5e6-96231b3b80d8
Without this, MachineCSE is powerless to handle redundant operations with truncated source operands.
This required fixing the 2-addr pass to handle tied subregisters. It isn't clear what combinations of subregisters can legally be tied, but the simple case of truncated source operands is now safely handled:
%vreg11<def> = COPY %vreg1:sub_32bit; GR32:%vreg11 GR64:%vreg1
%vreg12<def> = COPY %vreg2:sub_32bit; GR32:%vreg12 GR64:%vreg2
%vreg13<def,tied1> = ADD32rr %vreg11<tied0>, %vreg12<kill>, %EFLAGS<imp-def>
Test case: cse-add-with-overflow.ll.
This exposed an existing bug in
PPCInstrInfo::commuteInstruction. Thanks to Rafael for the test case:
PowerPC/crash.ll.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197465 91177308-0d34-0410-b5e6-96231b3b80d8
This is a base implementation of the powerpc-apple-darwin asm parser dialect.
* Enables infrastructure (essentially isDarwin()) and fixes up the parsing of asm directives to separate out ELF and MachO/Darwin additions.
* Enables parsing of {r,f,v}XX as register identifiers.
* Enables parsing of lo16() hi16() and ha16() as modifiers.
The changes to the test case are from David Fang (fangism).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197324 91177308-0d34-0410-b5e6-96231b3b80d8
Aside from a few minor latency corrections, the major change here is a new
hazard recognizer which focuses on better dispatch-group formation on the
POWER7. As with the PPC970's hazard recognizer, the most important thing it
does is avoid load-after-store hazards within the same dispatch group. It uses
the POWER7's special dispatch-group-terminating nop instruction (instead of
inserting multiple regular nop instructions). This new hazard recognizer makes
use of the scheduling dependency graph itself, built using AA information, to
robustly detect the possibility of load-after-store hazards.
significant test-suite performance changes (the error bars are 99.5% confidence
intervals based on 5 test-suite runs both with and without the change --
speedups are negative):
speedups:
MultiSource/Benchmarks/FreeBench/pcompress2/pcompress2
-0.55171% +/- 0.333168%
MultiSource/Benchmarks/TSVC/CrossingThresholds-dbl/CrossingThresholds-dbl
-17.5576% +/- 14.598%
MultiSource/Benchmarks/TSVC/Reductions-dbl/Reductions-dbl
-29.5708% +/- 7.09058%
MultiSource/Benchmarks/TSVC/Reductions-flt/Reductions-flt
-34.9471% +/- 11.4391%
SingleSource/Benchmarks/BenchmarkGame/puzzle
-25.1347% +/- 11.0104%
SingleSource/Benchmarks/Misc/flops-8
-17.7297% +/- 9.79061%
SingleSource/Benchmarks/Shootout-C++/ary3
-35.5018% +/- 23.9458%
SingleSource/Regression/C/uint64_to_float
-56.3165% +/- 25.4234%
SingleSource/UnitTests/Vectorizer/gcc-loops
-18.5309% +/- 6.8496%
regressions:
MultiSource/Benchmarks/ASCI_Purple/SMG2000/smg2000
18.351% +/- 12.156%
SingleSource/Benchmarks/Shootout-C++/methcall
27.3086% +/- 14.4733%
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197099 91177308-0d34-0410-b5e6-96231b3b80d8
For one predicate to subsume another, they must both check the same condition
register. Failure to check this prerequisite was causing miscompiles.
Fixes PR18003.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197089 91177308-0d34-0410-b5e6-96231b3b80d8
getSymbolWithGlobalValueBase use is to create a name of a new symbol based
on the name of an existing GV. Assert that and then remove the last call
to pass true to isImplicitlyPrivate.
This gives the mangler API a 1:1 mapping from GV to names, which is what we
need to drop the mangler dependency on the target (and use an extended
datalayout instead).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196472 91177308-0d34-0410-b5e6-96231b3b80d8
This patch tries to avoid unrelated changes other than fixing a few
hyphen-related ambiguities and contractions in nearby lines.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196471 91177308-0d34-0410-b5e6-96231b3b80d8
PPCScoreboardHazardRecognizer was a subclass of ScoreboardHazardRecognizer
which did only one thing: filtered out nodes in EmitInstruction for which
DAG->getInstrDesc(SU) returned NULL. This used to be the case for PPC pseudo
instructions. As far as I can tell, this is no longer true, and so we can use
ScoreboardHazardRecognizer directly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196171 91177308-0d34-0410-b5e6-96231b3b80d8
MO_JumpTableIndex and MO_ExternalSymbol don't show up on inline asm.
Keeping parts of the old asm printer just to print inline asm to a string that
we then parse back looks like a hack.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196111 91177308-0d34-0410-b5e6-96231b3b80d8
This adds a scheduling model for the POWER7 (P7) core, and enables the
machine-instruction scheduler when targeting the P7. Scheduling for the P7,
like earlier ooo PPC cores, requires considering both dispatch group hazards,
and functional unit resources and latencies. These are both modeled in a
combined itinerary. Dispatch group formation is still handled by the post-RA
scheduler (which still needs to be updated for the P7, but nevertheless does a
pretty good job).
One interesting aspect of this change is that I've also enabled to use of AA
duing CodeGen for the P7 (just as it is for the embedded cores). The benchmark
results seem to support this decision (see below), and while this is normally
useful for in-order cores, and not for ooo cores like the P7, I think that the
dispatch slot hazards are enough like in-order resources to make the AA useful.
Test suite significant performance differences (where negative is a speedup,
and positive is a regression) vs. the current situation:
MultiSource/Benchmarks/BitBench/drop3/drop3
with AA: N/A
without AA: -28.7614% +/- 19.8356%
(significantly against AA)
MultiSource/Benchmarks/FreeBench/neural/neural
with AA: -17.7406% +/- 11.2712%
without AA: N/A
(significantly in favor of AA)
MultiSource/Benchmarks/SciMark2-C/scimark2
with AA: -11.2079% +/- 1.80543%
without AA: -11.3263% +/- 2.79651%
MultiSource/Benchmarks/TSVC/Symbolics-flt/Symbolics-flt
with AA: -41.8649% +/- 17.0053%
without AA: -34.5256% +/- 23.7072%
MultiSource/Benchmarks/mafft/pairlocalalign
with AA: 25.3016% +/- 17.8614%
without AA: 38.6629% +/- 14.9391%
(significantly in favor of AA)
MultiSource/Benchmarks/sim/sim
with AA: N/A
without AA: 13.4844% +/- 7.18195%
(significantly in favor of AA)
SingleSource/Benchmarks/BenchmarkGame/Large/fasta
with AA: 15.0664% +/- 6.70216%
without AA: 12.7747% +/- 8.43043%
SingleSource/Benchmarks/BenchmarkGame/puzzle
with AA: 82.2713% +/- 26.3567%
without AA: 75.7525% +/- 41.1842%
SingleSource/Benchmarks/Misc/flops-2
with AA: -37.1621% +/- 20.7964%
without AA: -35.2342% +/- 20.2999%
(significantly in favor of AA)
These are 99.5% confidence intervals from 5 runs per configuration. Regarding
the choice to turn on AA during CodeGen, of these results, four seem
significantly in favor of using AA, and one seems significantly against. I'm
not making this decision based on these numbers alone, but these results
seem consistent with results I have from other tests, and so I think that, on
balance, using AA is a win.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195981 91177308-0d34-0410-b5e6-96231b3b80d8
In preparation for adding scheduling definitions for the POWER7, split some PPC
itinerary classes so that the P7's latencies and hazards can be better
described. For the most part, this means differentiating indexed from non-index
pre-increment loads and stores. Also, differentiate single from
double-precision sqrt.
No functionality change intended (except for a more-specific latency for
single-precision sqrt on the A2).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195980 91177308-0d34-0410-b5e6-96231b3b80d8
Some of the older PPC processor definitions don't have associated
SchedMachineModels; correct this for the PPC440.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195949 91177308-0d34-0410-b5e6-96231b3b80d8
The operand latencies for loads and stores in the PPC440 itinerary were wrong
(the store operands are all inputs, and the "with update" (pre-increment)
instructions need a latency for the additional output).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195948 91177308-0d34-0410-b5e6-96231b3b80d8
The operand latencies for the PPC440 should be specified relative to dispatch,
not relative to the initial fetch-and-decode stages. Because most instructions
(ignoring bypass) wait in dispatch until their operands are ready, this is
modeled as reading input operands "at dispatch" (0 cycles after issue), and so
every input and output operand has 4 cycles subtracted from it.
This could alter scheduling slightly, but I don't expect a large effect.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195947 91177308-0d34-0410-b5e6-96231b3b80d8
Modeling the fetch and decode units in the PPC440 itinerary does not add
anything to the hazard detection capability (and so modeling them just wastes
compile time).
No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195946 91177308-0d34-0410-b5e6-96231b3b80d8
I think, in principle, intrinsics_gen may be added explicitly.
That said, it can be added incidentally, since each target already has dependencies to llvm-tblgen.
Almost all source files depend on both CommonTaleGen and intrinsics_gen.
Explicit add_dependencies() have been pruned under lib/Target.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195929 91177308-0d34-0410-b5e6-96231b3b80d8
add_public_tablegen_target adds *CommonTableGen to LLVM_COMMON_DEPENDS.
LLVM_COMMON_DEPENDS affects add_llvm_library (and other add_target stuff) within its scope.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195927 91177308-0d34-0410-b5e6-96231b3b80d8
Instead of sharing functional unit names between the various PPC itineraries,
give each core its own unit names prefixed with the core name. This follows
the convention used by other backends (such as ARM), and removes a non-obvious
ordering dependency between the various PPCSchedule*.td files.
No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195908 91177308-0d34-0410-b5e6-96231b3b80d8
This adds the IIC_ prefix to the instruction itinerary class names, giving the
PPC backend a naming convention for itinerary classes that is more consistent
with that used by the X86 and ARM backends.
Instruction scheduling in the PPC backend needs a bunch of cleanup and
improvement (especially for the ooo cores). This is just a preliminary step.
No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195890 91177308-0d34-0410-b5e6-96231b3b80d8
The instruction definitions incorrectly specified that popcntd and popcntw have
record forms; they do not. This mistake was causing invalid code generation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195272 91177308-0d34-0410-b5e6-96231b3b80d8
Masking operations (where only some number of the low bits are being kept) are
selected to rldicl(x, 0, mb). If x is a logical right shift (which would become
rldicl(y, 64-n, n)), we might be able to fold the two instructions together:
rldicl(rldicl(x, 64-n, n), 0, mb) -> rldicl(x, 64-n, mb) for n <= mb
The right shift is really a left rotate followed by a mask, and if the explicit
mask is a more-restrictive sub-mask of the mask implied by the shift, only one
rldicl is needed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195185 91177308-0d34-0410-b5e6-96231b3b80d8
This patch removes most of the trivial cases of weak vtables by pinning them to
a single object file. The memory leaks in this version have been fixed. Thanks
Alexey for pointing them out.
Differential Revision: http://llvm-reviews.chandlerc.com/D2068
Reviewed by Andy
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195064 91177308-0d34-0410-b5e6-96231b3b80d8
This change is incorrect. If you delete virtual destructor of both a base class
and a subclass, then the following code:
Base *foo = new Child();
delete foo;
will not cause the destructor for members of Child class. As a result, I observe
plently of memory leaks. Notable examples I investigated are:
ObjectBuffer and ObjectBufferStream, AttributeImpl and StringSAttributeImpl.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194997 91177308-0d34-0410-b5e6-96231b3b80d8
Stop folding constant adds into GEP when the type size doesn't match.
Otherwise, the adds' operands are effectively being promoted, changing the
conditions of an overflow. Results are different when:
sext(a) + sext(b) != sext(a + b)
Problem originally found on x86-64, but also fixed issues with ARM and PPC,
which used similar code.
<rdar://problem/15292280>
Patch by Duncan Exon Smith!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194840 91177308-0d34-0410-b5e6-96231b3b80d8
On non-Darwin PPC systems, we currently strip off the register name prefix
prior to instruction printing. So instead of something like this:
mr r3, r4
we print this:
mr 3, 4
The first form is the default on Darwin, and is understood by binutils, but not
yet understood by our integrated assembler. Once our integrated-as understands
full register names as well, this temporary option will be replaced by tying
this functionality to the verbose-asm option. The numeric-only form is
compatible with legacy assemblers and tools, and is also gcc's default on most
PPC systems. On the other hand, it is harder to read, and there are some
analysis tools that expect full register names.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194384 91177308-0d34-0410-b5e6-96231b3b80d8
This patch fixes an old FIXME by creating a MCTargetStreamer interface
and moving the target specific functions for ARM, Mips and PPC to it.
The ARM streamer is still declared in a common place because it is
used from lib/CodeGen/ARMException.cpp, but the Mips and PPC are
completely hidden in the corresponding Target directories.
I will send an email to llvmdev with instructions on how to use this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192181 91177308-0d34-0410-b5e6-96231b3b80d8
When generating code for shared libraries, even local calls may be
intercepted, so we need a nop after the call for the linker to fix up the
TOC. Test case adapted from the one provided in PR17354.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191440 91177308-0d34-0410-b5e6-96231b3b80d8
When asked to pad an irregular number of bytes, we should fill with
zeros. This is consistent with the behavior specified in the AIX
Assembler Language Reference as well as other LLVM and binutils
assemblers.
N.B. There is a small deviation from binutils' PPC assembler:
when handling pads which are greater than 4 bytes but not mod 4,
binutils will not emit any NOP sequences at all and only use zeros.
This may or may not be a bug but there is no excellent rationale as to
why that behavior is important to emulate. If that behavior is needed,
we can change writeNopData() to behave in the same way.
This fixes PR17352.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191426 91177308-0d34-0410-b5e6-96231b3b80d8
Encodings were checked against the Power ISA documents and double
checked against binutils.
This fixes PR17350.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191419 91177308-0d34-0410-b5e6-96231b3b80d8
The binutils assembler supports a mode called DOLLAR_DOT which treats
the dollar sign token as a reference to the current program counter if
the dollar sign doesn't precede a constant or identifier.
This commit adds a new MCAsmInfo flag stating whether or not a given
target supports this interpretation of the dollar sign token; by
default, this flag is not enabled.
Further, enable this flag for PPC. The system assembler for AIX and
binutils both support using the dollar sign in this manner.
This fixes PR17353.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191368 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, the DAGISel function WalkChainUsers was spotting that it
had entered already-selected territory by whether a node was a
MachineNode (amongst other things). Since it's fairly common practice
to insert MachineNodes during ISelLowering, this was not the correct
check.
Looking around, it seems that other nodes get their NodeId set to -1
upon selection, so this makes sure the same thing happens to all
MachineNodes and uses that characteristic to determine whether we
should stop looking for a loop during selection.
This should fix PR15840.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191165 91177308-0d34-0410-b5e6-96231b3b80d8
Pre-increment loads are microcoded on the A2, and the address increment occurs
only after the load completes. As a result, the latency of the GPR address
update is an additional 2 cycles on top of the load latency.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191156 91177308-0d34-0410-b5e6-96231b3b80d8
Documenting a design choice to generate only medium model sequences for TLS
addresses at this time. Small and large code models could be supported if
necessary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190883 91177308-0d34-0410-b5e6-96231b3b80d8
Large code model on PPC64 requires creating and referencing TOC entries when
using the addis/ld form of addressing. This was not being done in all cases.
The changes in this patch to PPCAsmPrinter::EmitInstruction() fix this. Two
test cases are also modified to reflect this requirement.
Fast-isel was not creating correct code for loading floating-point constants
using large code model. This also requires the addis/ld form of addressing.
Previously we were using the addis/lfd shortcut which is only applicable to
medium code model. One test case is modified to reflect this requirement.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190882 91177308-0d34-0410-b5e6-96231b3b80d8
Fast-isel generates a COPY_TO_REGCLASS for widening f32 to f64, which
is a nop on PPC64. This is needed to keep the register class system
happy, but on the fast-isel path it is not removed before emit as it
is for DAG select. Ignore this op when emitting instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190795 91177308-0d34-0410-b5e6-96231b3b80d8
This is a re-commit of r190764, with an extra check to make sure that we're not
performing the transformation on illegal types (a small test case has been
added for this as well).
Original commit message:
The PPC backend uses a target-specific DAG combine to turn unaligned Altivec
loads into a permutation-based sequence when possible. Unfortunately, the
target-specific DAG combine is not always called on all loads of interest
(sometimes the routines in DAGCombine call CombineTo such that the new node and
users are not added to the worklist); allowing the combine to trigger early
(before type legalization) mitigates this problem. Because the autovectorizers
only create legal vector types, I don't expect a lot of cases where this
optimization is enabled by type legalization in practice.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190771 91177308-0d34-0410-b5e6-96231b3b80d8
This is causing test-suite failures.
Original commit message:
The PPC backend uses a target-specific DAG combine to turn unaligned Altivec
loads into a permutation-based sequence when possible. Unfortunately, the
target-specific DAG combine is not always called on all loads of interest
(sometimes the routines in DAGCombine call CombineTo such that the new node and
users are not added to the worklist); allowing the combine to trigger early
(before type legalization) mitigates this problem. Because the autovectorizers
only create legal vector types, I don't expect a lot of cases where this
optimization is enabled by type legalization in practice.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190765 91177308-0d34-0410-b5e6-96231b3b80d8
The PPC backend uses a target-specific DAG combine to turn unaligned Altivec
loads into a permutation-based sequence when possible. Unfortunately, the
target-specific DAG combine is not always called on all loads of interest
(sometimes the routines in DAGCombine call CombineTo such that the new node and
users are not added to the worklist); allowing the combine to trigger early
(before type legalization) mitigates this problem. Because the autovectorizers
only create legal vector types, I don't expect a lot of cases where this
optimization is enabled by type legalization in practice.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190764 91177308-0d34-0410-b5e6-96231b3b80d8
When a structure is passed by value, and that structure contains a vector
member, according to the PPC ABI, the structure will receive enhanced alignment
(so that the vector within the structure will always be aligned).
This should resolve PR16641.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190636 91177308-0d34-0410-b5e6-96231b3b80d8
In fast-math mode sqrt(x) is calculated using the fast expansion of the
reciprocal of the reciprocal sqrt expansion. The reciprocal and reciprocal
sqrt expansions use the associated estimate instructions along with some Newton
iterations. Unfortunately, as a result, sqrt(0) was being calculated as NaN,
which is not correct. Now we explicitly return a result of zero if the input is
zero.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190624 91177308-0d34-0410-b5e6-96231b3b80d8
Use the new instruction deprecation feature to mark mftb (now replaced with
mfspr) and dst (along with the other Altivec cache control instructions) as
deprecated when targeting cores supporting at least ISA v2.03.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190605 91177308-0d34-0410-b5e6-96231b3b80d8
The 'Deprecated' class allows you to specify a SubtargetFeature that the
instruction is deprecated on.
The 'ComplexDeprecationPredicate' class allows you to define a custom
predicate that is called to check for deprecation.
For example:
ComplexDeprecationPredicate<"MCR">
would mean you would have to define the following function:
bool getMCRDeprecationInfo(MCInst &MI, MCSubtargetInfo &STI,
std::string &Info)
Which returns 'false' for not deprecated, and 'true' for deprecated
and store the warning message in 'Info'.
The MCTargetAsmParser constructor was chaned to take an extra argument of
the MCInstrInfo class, so out-of-tree targets will need to be changed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190598 91177308-0d34-0410-b5e6-96231b3b80d8
Aggressive anti-dependency breaking is enabled by default for all PPC cores.
This provides a general speedup on the P7 and other platforms (among other
factors, the instruction group formation for the non-embedded PPC cores is done
during post-RA scheduling). In order to do this safely, the incompatibility
between uses of the MFOCRF instruction and anti-dependency breaking are
resolved by marking MFOCRF with hasExtraSrcRegAllocReq. As noted in the removed
FIXME, the problem was that MFOCRF's output is sensitive to the identify of the
source register, and always paired with a shift to undo this effect. Because
anti-dependency breaking is unaware of this hidden dependency of the shift
amount on the source register of the MFOCRF instruction, changing that register
must be inhibited.
Two test cases were adjusted: The SjLj test was made more insensitive to
register choices and scheduling; the saveCR test disabled anti-dependency
breaking because part of what it is testing is proper register reuse.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190587 91177308-0d34-0410-b5e6-96231b3b80d8
