behavior based on other files defining DEBUG_TYPE, which means it cannot
define DEBUG_TYPE at all. This is actually better IMO as it forces folks
to define relevant DEBUG_TYPEs for their files. However, it requires all
files that currently use DEBUG(...) to define a DEBUG_TYPE if they don't
already. I've updated all such files in LLVM and will do the same for
other upstream projects.
This still leaves one important change in how LLVM uses the DEBUG_TYPE
macro going forward: we need to only define the macro *after* header
files have been #include-ed. Previously, this wasn't possible because
Debug.h required the macro to be pre-defined. This commit removes that.
By defining DEBUG_TYPE after the includes two things are fixed:
- Header files that need to provide a DEBUG_TYPE for some inline code
can do so by defining the macro before their inline code and undef-ing
it afterward so the macro does not escape.
- We no longer have rampant ODR violations due to including headers with
different DEBUG_TYPE definitions. This may be mostly an academic
violation today, but with modules these types of violations are easy
to check for and potentially very relevant.
Where necessary to suppor headers with DEBUG_TYPE, I have moved the
definitions below the includes in this commit. I plan to move the rest
of the DEBUG_TYPE macros in LLVM in subsequent commits; this one is big
enough.
The comments in Debug.h, which were hilariously out of date already,
have been updated to reflect the recommended practice going forward.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206822 91177308-0d34-0410-b5e6-96231b3b80d8
Removes some extra manual dynamic memory allocation/management. It does
get a bit quirky having to make State's members mutable and
pointers/references to const rather than non-const, but that's a
necessary workaround to dealing with the std::set elements.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206807 91177308-0d34-0410-b5e6-96231b3b80d8
entirely clear whether this should be valid with modules enabled, but the fixed
code is cleaner regardless.
Also fix a TU-local type that accidentally had external linkage.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206714 91177308-0d34-0410-b5e6-96231b3b80d8
ARM64 ended up reaching odder parts of TableGen alias generation than
current backends and caused a segfault.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205089 91177308-0d34-0410-b5e6-96231b3b80d8
This is like the LLVMMatchType, except the verifier checks that the
second argument is a vector with the same base type and half the
number of elements.
This will be used by the ARM64 backend.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205079 91177308-0d34-0410-b5e6-96231b3b80d8
These are used in the ARM backends to aid type-checking on patterns involving
intrinsics. By making sure one argument is an extended/truncated version of
another.
However, there's no reason to limit them to just vectors types. For example
AArch64 has the instruction "uqshrn sD, dN, #imm" which would naturally use an
intrinsic taking an i64 and returning an i32.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205003 91177308-0d34-0410-b5e6-96231b3b80d8
When an instruction's operand list does not have a sufficient number of
operands to match with all of the variables that contribute to its
encoding, instead of asserting inside a call to getSubOperandNumber, produce an
informative error.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204542 91177308-0d34-0410-b5e6-96231b3b80d8
The "noduplicate" function attribute exists to prevent certain optimizations
from duplicating calls to the function. This is important on platforms where
certain function call duplications are unsafe (for example execution barriers
for CUDA and OpenCL).
This patch makes it possible to specify intrinsics as "noduplicate" and
translates that to the appropriate function attribute.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204200 91177308-0d34-0410-b5e6-96231b3b80d8
Utilize the previous move of MVT to a separate header for all trivial
cases (that don't need any further restructuring).
Reviewed By: Tim Northover
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204003 91177308-0d34-0410-b5e6-96231b3b80d8
There are currently two schemes for mapping instruction operands to
instruction-format variables for generating the instruction encoders and
decoders for the assembler and disassembler respectively: a) to map by name and
b) to map by position.
In the long run, we'd like to remove the position-based scheme and use only
name-based mapping. Unfortunately, the name-based scheme currently cannot deal
with complex operands (those with suboperands), and so we currently must use
the position-based scheme for those. On the other hand, the position-based
scheme cannot deal with (register) variables that are split into multiple
ranges. An upcoming commit to the PowerPC backend (adding VSX support) will
require this capability. While we could teach the position-based scheme to
handle that, since we'd like to move away from the position-based mapping
generally, it seems silly to teach it new tricks now. What makes more sense is
to allow for partial transitioning: use the name-based mapping when possible,
and only use the position-based scheme when necessary.
Now the problem is that mixing the two sensibly was not possible: the
position-based mapping would map based on position, but would not skip those
variables that were mapped by name. Instead, the two sets of assignments would
overlap. However, I cannot currently change the current behavior, because there
are some backends that rely on it [I think mistakenly, but I'll send a message
to llvmdev about that]. So I've added a new TableGen bit variable:
noNamedPositionallyEncodedOperands, that can be used to cause the
position-based mapping to skip variables mapped by name.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203767 91177308-0d34-0410-b5e6-96231b3b80d8
"ProcResource def is not included in the ProcResources".
Some of the machine model definitions were not added to the
processor's list used for diagnostics and error checking.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203749 91177308-0d34-0410-b5e6-96231b3b80d8
The old system was fairly convoluted:
* A temporary label was created.
* A single PROLOG_LABEL was created with it.
* A few MCCFIInstructions were created with the same label.
The semantics were that the cfi instructions were mapped to the PROLOG_LABEL
via the temporary label. The output position was that of the PROLOG_LABEL.
The temporary label itself was used only for doing the mapping.
The new CFI_INSTRUCTION has a 1:1 mapping to MCCFIInstructions and points to
one by holding an index into the CFI instructions of this function.
I did consider removing MMI.getFrameInstructions completelly and having
CFI_INSTRUCTION own a MCCFIInstruction, but MCCFIInstructions have non
trivial constructors and destructors and are somewhat big, so the this setup
is probably better.
The net result is that we don't create temporary labels that are never used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203204 91177308-0d34-0410-b5e6-96231b3b80d8
This compiles with no changes to clang/lld/lldb with MSVC and includes
overloads to various functions which are used by those projects and llvm
which have OwningPtr's as parameters. This should allow out of tree
projects some time to move. There are also no changes to libs/Target,
which should help out of tree targets have time to move, if necessary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203083 91177308-0d34-0410-b5e6-96231b3b80d8
Unfortunately, it is currently impossible to use a PatFrag as part of an output
pattern (the part of the pattern that has instructions in it) in TableGen.
Looking at the current implementation, this was clearly intended to work (there
is already code in place to expand patterns in the output DAG), but is
currently broken by the baked-in type-checking assumption and the order in which
the pattern fragments are processed (output pattern fragments need to be
processed after the instruction definitions are processed).
Fixing this is fairly simple, but requires some way of differentiating output
patterns from the existing input patterns. The simplest way to handle this
seems to be to create a subclass of PatFrag, and so that's what I've done here.
As a simple example, this allows us to write:
def crnot : OutPatFrag<(ops node:$in),
(CRNOR $in, $in)>;
def : Pat<(not i1:$in),
(crnot $in)>;
which captures the core use case: handling of repeated subexpressions inside
of complicated output patterns.
This will be used by an upcoming commit to the PowerPC backend.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202450 91177308-0d34-0410-b5e6-96231b3b80d8
