This is a complete re-write if the bottom-up vectorization class.
Before this commit we scanned the instruction tree 3 times. First in search of merge points for the trees. Second, for estimating the cost. And finally for vectorization.
There was a lot of code duplication and adding the DCE exposed bugs. The new design is simpler and DCE was a part of the design.
In this implementation we build the tree once. After that we estimate the cost by scanning the different entries in the constructed tree (in any order). The vectorization phase also works on the built tree.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185774 91177308-0d34-0410-b5e6-96231b3b80d8
Obviously the personality function should be emitted as language handler
instead of the hard coded _GCC_specific_handler. The language specific
data must be placed after the unwind information therefore it must not
be emitted into a separate section.
Reviewed by Charles Davis and Nico Rieck.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185761 91177308-0d34-0410-b5e6-96231b3b80d8
For alignment purposes, the instruction array will always have an even
number of entries, with the final entry potentially unused (in which
case the array will be one longer than indicated by the count of unwind
codes field).
Reviewed by Charles Davis and Nico Rieck.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185760 91177308-0d34-0410-b5e6-96231b3b80d8
data structures.
The Win64 EH data structures must be of type IMAGE_REL_AMD64_ADDR32NB
instead of IMAGE_REL_AMD64_ADDR32. This is easiely achieved by adding
the VK_COFF_IMGREL32 modifier to the symbol reference.
Change also references to start and end of the SEH range of a function
as offsets to start of the function.
Reviewed by Charles Davis and Nico Rieck.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185759 91177308-0d34-0410-b5e6-96231b3b80d8
The code offset for unwind code SET_FPREG is wrong because it is set
to constant 0. The fix is to do the same as for the other unwind
codes: emit a label and later the absolute difference between the
label and the begin of the prologue.
Also enables the failing test case MC/COFF/seh.s
Reviewed by Charles Davis and Nico Rieck.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185758 91177308-0d34-0410-b5e6-96231b3b80d8
ReduceLoadWidth unconditionally drops extensions from loads. Limit it to the
case when all of the bits the extension would otherwise produce are dropped by
the shrink. It would be possible to shrink the load in more cases by merging
the extensions, but this isn't trivial and a very rare case. I left a TODO for
that case.
Fixes PR16551.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185755 91177308-0d34-0410-b5e6-96231b3b80d8
This prevents the emission of DAG-generated vreg definitions after a
tail call be dropping them entirely (on the grounds that nothing could
use them anyway, and they interfere with O0 CodeGen).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185754 91177308-0d34-0410-b5e6-96231b3b80d8
This is the first patch in a series of 3 patches which clean up how we create
runtime function declarations in the ARC optimizer when they do not exist
already in the IR.
Currently we have a bunch of duplicated code in ObjCARCOpts, ObjCARCContract
that does this. This patch refactors that code into a separate class called
ARCRuntimeEntryPoints which lazily creates the declarations for said
entrypoints.
The next two patches will consist of the work of refactoring
ObjCARCContract/ObjCARCOpts to use this new code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185740 91177308-0d34-0410-b5e6-96231b3b80d8
functions. Make the function attributes pass add it to known library functions
and when it can deduce it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185735 91177308-0d34-0410-b5e6-96231b3b80d8
This function is complementary to createTemporaryFile. It handles the case were
the unique file is *not* temporary: we will rename it in the end. Since we
will rename it, the file has to be in the same filesystem as the final
destination and we don't prepend the system temporary directory.
This has a small semantic difference from unique_file: the default mode is 0666.
This matches the behavior of most unix tools. For example, with this change
lld now produces files with the same permissions as ld. I will add a test
of this change when I port clang over to createUniqueFile (next commit).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185726 91177308-0d34-0410-b5e6-96231b3b80d8
This function is inspired by clang's Driver::GetTemporaryPath. It hides the
pattern used for uniquing and requires simple file names that are always
placed in the system temporary directory.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185716 91177308-0d34-0410-b5e6-96231b3b80d8
A "pkhtb x, x, y asr #num" uses the lower 16 bits of "y asr #num" and packs them
in the bottom half of "x". An arithmetic and logic shift are only equivalent in
this context if the shift amount is 16. We would be shifting in ones into the
bottom 16bits instead of zeros if "y" is negative.
radar://14338767
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185712 91177308-0d34-0410-b5e6-96231b3b80d8
The stack coloring pass has code to delete stores and loads that become
trivially dead after coloring. Extend it to cope with single instructions
that copy from one frame index to another.
The testcase happens to show an example of this kicking in at the moment.
It did occur in Real Code too though.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185705 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes foldMemoryOperandImpl() so that it doesn't create duplicated
frame MMOs. I hadn't realized when writing r185434 that it was the caller's
responsibility to add these.
No behavioural change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185704 91177308-0d34-0410-b5e6-96231b3b80d8
The stack coloring pass renumbered frame indexes with a loop of the form:
for each frame index FI
for each instruction I that uses FI
for each use of FI in I
rename FI to FI'
This caused problems if an instruction used two frame indexes F0 and F1
and if F0 was renamed to F1 and F1 to F2. The first time we visited the
instruction we changed F0 to F1, then we changed both F1s to F2.
In other words, the problem was that SSRefs recorded which instructions
used an FI, but not which MachineOperands and MachineMemOperands within
that instruction used it.
This is easily fixed for MachineOperands by walking the instructions
once and processing each operand in turn. There's already a loop to
do that for dead store elimination, so it seemed more efficient to
fuse the two at the block level.
MachineMemOperands are more tricky because they can be shared between
instructions. The patch handles them by making SSRefs an array of
MachineMemOperands rather than an array of MachineInstrs. We might end
up processing the same MachineMemOperand twice, but that's OK because
we always know from the SSRefs index what the original frame index was.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185703 91177308-0d34-0410-b5e6-96231b3b80d8
...now that the problem that prompted the restriction has been fixed.
The original spill-02.py was a compromise because at the time I couldn't
find an example that actually failed without the two scavenging slots.
The version included here did.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185701 91177308-0d34-0410-b5e6-96231b3b80d8
When a target@got@tprel or target@got@tprel@l symbol variant is used in
a fixup_ppc_half16 (*not* fixup_ppc_half16ds) context, we currently fail,
since the corresponding R_PPC64_GOT_TPREL16 / R_PPC64_GOT_TPREL16_LO
relocation types do not exist.
However, since such symbol variants resolve to GOT offsets which are
always 4-aligned, we can simply instead use the _DS variants of the
relocation types, which *do* exist.
The same applies for the @got@dtprel variants.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185700 91177308-0d34-0410-b5e6-96231b3b80d8
This is another prerequisite for frame-to-frame MVC copies.
I'll commit the patch that makes use of the slot separately.
The downside of trying to test many corner cases with each of the
available addressing modes is that a fair few tests need to account
for the new frame layout. I do still think it's useful to have all
these tests though, since it's something that wouldn't get much coverage
otherwise.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185698 91177308-0d34-0410-b5e6-96231b3b80d8
SystemZ wants normal register scavenging slots, as close to the stack or
frame pointer as possible. The only reason it was using custom code was
because PrologEpilogInserter assumed an x86-like layout, where the frame
pointer is at the opposite end of the frame from the stack pointer.
This meant that when frame pointer elimination was disabled,
the slots ended up being as close as possible to the incoming
stack pointer, which is the opposite of what we want on SystemZ.
This patch adds a new knob to say which layout is used and converts
SystemZ to use target-independent scavenging slots. It's one of the pieces
needed to support frame-to-frame MVCs, where two slots might be required.
The ABI requires us to allocate 160 bytes for calls, so one approach
would be to use that area as temporary spill space instead. It would need
some surgery to make sure that the slot isn't live across a call though.
I stuck to the "isFPCloseToIncomingSP - ..." style comment on the
"do what the surrounding code does" principle. The FP case is already
covered by several Systemz/frame-* tests, which fail without the
PrologueEpilogueInserter change, so no new ones are needed.
No behavioural change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185696 91177308-0d34-0410-b5e6-96231b3b80d8
