Using REG_SEQUENCE for BUILD_VECTOR rather than a series of INSERT_SUBREG
instructions should make it easier for the register allocator to coalasce
unnecessary copies.
v2:
- Use an SGPR register class if all the operands of BUILD_VECTOR are
SGPRs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188427 91177308-0d34-0410-b5e6-96231b3b80d8
The instruction selector will now try to infer the destination register
so it can decided whether to use V_MOV_B32 or S_MOV_B32 when copying
immediates.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188426 91177308-0d34-0410-b5e6-96231b3b80d8
The previous code declared the operand as unknown:$vaddr, which made
it possible for scalar registers to be used instead of vector registers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188425 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes the F2U opcode for the Mesa driver.
Patch by: Marek Olšák
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188418 91177308-0d34-0410-b5e6-96231b3b80d8
This is a follow-up to r187693, correcting that code to request the correct
register class. The previous version, with the wrong register class, was not
really correcting the constraints, but rather was removing them. Coincidentally,
this fixed the failing test case in r187693, but obviously created other
problems.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188407 91177308-0d34-0410-b5e6-96231b3b80d8
When determining if two different loads are from the same base address,
this patch allows one load to use a t2LDRi8 address mode and another to
use a t2LDRi12 address mode. The current implementation is very
conservative and this allows the case of differing Thumb2 byte loads to
be considered. Allowing these differing modes instead of forcing the exact
same opcode is useful for situations where one opcodes loads from a base
address+1 and a second opcode loads for a base address-1.
Patch by Daniel Stewart.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188385 91177308-0d34-0410-b5e6-96231b3b80d8
* msa SubtargetFeature
* registers
* ld.[bhwd], and st.[bhwd] instructions
Does not correctly prohibit use of both 32-bit FPU registers and MSA together.
Patch by Daniel Sanders
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188313 91177308-0d34-0410-b5e6-96231b3b80d8
LowerCallTo returns a pair with the return value of the call as the first
element and the chain associated with the return value as the second element. If
we lower a call that has a void return value, LowerCallTo returns an SDValue
with a NULL SDNode and the chain for the call. Thus makeLibCall by just
returning the first value makes it impossible for you to set up the chain so
that the call is not eliminated as dead code.
I also updated all references to makeLibCall to reflect the new return type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188300 91177308-0d34-0410-b5e6-96231b3b80d8
undefined and produce an error message instead as this is a non-relocatable
expression with X86 Mach-O.
rdar://8920876
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188218 91177308-0d34-0410-b5e6-96231b3b80d8
R600 doesn't need to do any scheduling on the SelectionDAG now that it
has a very good MachineScheduler. Also, using the VLIW SelectionDAG
scheduler was having a major impact on compile times. For example with
the phatk kernel here are the LLVM IR to machine code compile times:
With Sched::VLIW
Total Compile Time: 1.4890 Seconds (User + System)
SelectionDAG Instruction Scheduling: 1.1670 Seconds (User + System)
With Sched::Source
Total Compile Time: 0.3330 Seconds (User + System)
SelectionDAG Instruction Scheduling: 0.0070 Seconds (User + System)
The code ouput was identical with both schedulers. This may not be true
for all programs, but it gives me confidence that there won't be much
reduction, if any, in code quality by using Sched::Source.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188215 91177308-0d34-0410-b5e6-96231b3b80d8
For now this is restricted to fixed-length comparisons with a length
in the range [1, 256], as for memcpy() and MVC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188163 91177308-0d34-0410-b5e6-96231b3b80d8
is actually an instrinsic that will not occur in libc. This list here
is not exhaustive but fixes the one places in test-suite where this occurs.
I have filed a bug against myself to research the full list and add them
to the array of such cases. In the future, actual stub generation will occur
in a later phase and we won't need this code because we will know at that time
during the compilation that in fact no helper function was even needed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188149 91177308-0d34-0410-b5e6-96231b3b80d8
instruction move. Just affects static relocation. -static works fine now
with mips16 for the most part.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188143 91177308-0d34-0410-b5e6-96231b3b80d8
I need to go through all the runtime routine list and see if there
are any more I need to add for mips16 floating point. Prototypes must
be correct or else I don't know to add a helper function call.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188106 91177308-0d34-0410-b5e6-96231b3b80d8
Use it to avoid repeating ourselves too often. Also store MVT::SimpleValueType
in the TTI tables so they can be statically initialized, MVT's constructors
create bloated initialization code otherwise.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188095 91177308-0d34-0410-b5e6-96231b3b80d8
In Thumb1, only one variant is supported: CPS{effect} {flags}
Thumb2 supports three:
CPS{effect}.W {flags}
CPS{effect} {flags} {mode}
CPS {mode}
Canonically, .W should be used only when ambiguity is present between encodings of different width.
The wide suffix is still accepted for the latter two forms via aliases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188071 91177308-0d34-0410-b5e6-96231b3b80d8
The long encoding for Thumb2 unconditional branches is broken.
Additionally, there is no range checking for target operands; as such
for instructions originating in assembly code, only short Thumb encodings
are generated, regardless of the bitsize needed for the offset.
Adding range checking is non trivial due to the representation of Thumb
branch instructions. There is no true difference between conditional and
unconditional branches in terms of operands and syntax - even unconditional
branches have a predicate which is expected to match that of the IT block
they are in. Yet, the encodings and the permitted size of the offset differ.
Due to this, for any mnemonic there are really 4 encodings to choose for.
The problem cannot be handled in the parser alone or by manipulating td files.
Because the parser builds first a set of match candidates and then checks them
one by one, whatever tablegen-only solution might be found will ultimately be
dependent of the parser's evaluation order. What's worse is that due to the fact
that all branches have the same syntax and the same kinds of operands, that
order is governed by the lexicographical ordering of the names of operand
classes...
To circumvent all this, any necessary disambiguation is added to the instruction
validation pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188067 91177308-0d34-0410-b5e6-96231b3b80d8
* ELFTypes.h contains template magic for defining types based on endianess, size, and alignment.
* ELFFile.h defines the ELFFile class which provides low level ELF specific access.
* ELFObjectFile.h contains ELFObjectFile which uses ELFFile to implement the ObjectFile interface.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188022 91177308-0d34-0410-b5e6-96231b3b80d8
