Since (as of r190716) Clang no longer emits debug info for C++ friend
declarations (and it seems GCC never has/does, which was the motivation
for the Clang change), there's no actual reachable case for implementing
the part of DWARF 4, Section 7.27 part 5 that pertains to friends.
Leave an assert here so that if/when we do have a client producing
friends and using type units, we can fill in the gap and add appropriate
(unit and feature) tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193193 91177308-0d34-0410-b5e6-96231b3b80d8
The loop bounds here are uint32_t variables, so it makes sense for the
loop variables to have the same type.
Patch by Yuchen Wu!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193192 91177308-0d34-0410-b5e6-96231b3b80d8
Rename Size to EndPos, which makes more sense because the variable
stores the last location of the blocks.
Patch by Yuchen Wu!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193189 91177308-0d34-0410-b5e6-96231b3b80d8
The set of circumstances where the writeback register is allowed to be in the
list of registers is rather baroque, but I think this implements them all on
the assembly parsing side.
For disassembly, we still warn about an ARM-mode LDM even if the architecture
revision is < v7 (the required architecture information isn't available). It's
a silly instruction anyway, so hopefully no-one will mind.
rdar://problem/15223374
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193185 91177308-0d34-0410-b5e6-96231b3b80d8
The AMDGPUIndirectAddressing pass was previously responsible for
lowering private loads and stores to indirect addressing instructions.
However, this pass was buggy and way too complicated. The only
advantage it had over the new simplified code was that it saved one
instruction per direct write to private memory. This optimization
likely has a minimal impact on performance, and we may be able
to duplicate it using some other transformation.
For the private address space, we now:
1. Lower private loads/store to Register(Load|Store) instructions
2. Reserve part of the register file as 'private memory'
3. After regalloc lower the Register(Load|Store) instructions to
MOV instructions that use indirect addressing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193179 91177308-0d34-0410-b5e6-96231b3b80d8
Includes a test case/FIXME demonstrating a bug/limitation in pointer to
member hashing. To be honest I'm not sure why we don't just always use
summary hashing for referenced types... but perhaps I'm missing
something.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193175 91177308-0d34-0410-b5e6-96231b3b80d8
Line counts in llvm-cov are read in as 64-bit integers but were being truncated
to 32-bit in collectLineCounts(), which caused overflow for large counts.
This patch fixes all counts to be uint64_t.
Patch by Yuchen Wu!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193172 91177308-0d34-0410-b5e6-96231b3b80d8
This is a stopgap fix for cast warnings introduced in r192864.
A proper fix should be investigated by the author when possible.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193160 91177308-0d34-0410-b5e6-96231b3b80d8
These branches have a 16-bit offset (R_MIPS_PC16).
List of conditional branch instructions:
bnz.{b,h,w,d}
bnz.v
bz.{b,h,w,d}
bz.v
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193157 91177308-0d34-0410-b5e6-96231b3b80d8
VTList has a long life cycle through the module and getVTList is frequently called. In current getVTList, sequential search over a std::vector is used, this is inefficient in big module.
This patch use FoldingSet to implement hashing mechanism when searching.
Reviewer: Nadav Rotem
Test : Pass unit tests & LNT test suite
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193150 91177308-0d34-0410-b5e6-96231b3b80d8
- Replaced tabs with proper padding
- print() takes two arguments, which are the GCNO and GCDA filenames
- Files are listed at the top of output, appended by line 0
- Stripped strings of trailing \0s
- Removed last two lines of whitespace in output
Patch by Yuchen Wu!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193148 91177308-0d34-0410-b5e6-96231b3b80d8
We can have a struct type with a single field and the field does not start
with 0. In that case, we should correctly update the offset.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193137 91177308-0d34-0410-b5e6-96231b3b80d8
collectLineCounts() should only organize the output data. This is done in
anticipation of subsequent changes which will pass in GCNO and GCDA filenames
into the print function where it is printed similar to the gcov output.
Patch by Yuchen Wu!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193134 91177308-0d34-0410-b5e6-96231b3b80d8
There are several other tag types that need similar handling but to
ensure test coverage they'll be coming incrementally.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193126 91177308-0d34-0410-b5e6-96231b3b80d8
This uses a map, keeping the type DIE numbering separate from the DIEs
themselves - alternatively we could do things the way GCC does if we
want to add an integer to the DIE type to record the numbering there.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193105 91177308-0d34-0410-b5e6-96231b3b80d8
The test before wasn't successfully testing this
since it was missing the datalayout piece to change
the size of the second address space.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193102 91177308-0d34-0410-b5e6-96231b3b80d8
the instruction defenitions and ISEL reflect this.
Prior to this patch these instructions took an i32i8imm, and the high bits were
dropped during encoding. This led to incorrect behavior for shifts by
immediates higher than 255. This patch fixes that issue by detecting large
immediate shifts and returning constant zero (for logical shifts) or capping
the shift amount at an encodable value (for arithmetic shifts).
Fixes <rdar://problem/14968098>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193096 91177308-0d34-0410-b5e6-96231b3b80d8
This allows various variables to be more self-documenting and easier to
debug by being of specific types without overlapping enum values.
Precommit review by Eric Christopher.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193091 91177308-0d34-0410-b5e6-96231b3b80d8
When a linkonce_odr value that is on the dso list is not unnamed_addr
we can still look to see if anything is actually using its address. If
not, it is safe to hide it.
This patch implements that by moving GlobalStatus to Transforms/Utils
and using it in Internalize.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193090 91177308-0d34-0410-b5e6-96231b3b80d8
Found while adding type safety to the various DWARF enumerations (form,
attribute, tag, etc) that caused Clang to warn on an incompletely
covered switch. Converting the comment to a default/unreachable
uncovered this case of an unsupported form encoding. Seems we were
skipping fission strings entirely.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193089 91177308-0d34-0410-b5e6-96231b3b80d8
These instructions are logically related as they allow read/write of MSA control registers.
Currently MSA control registers are emitted by number but hopefully that will change as soon
as GAS starts accepting them by name as that would make the assembly easier to read.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193078 91177308-0d34-0410-b5e6-96231b3b80d8
The second parameter of the SLD intrinsic is the number of columns (GPR) to
slide left the source array.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193076 91177308-0d34-0410-b5e6-96231b3b80d8
A landing pad can be jumped to only by the unwind edge of an invoke
instruction. If we eliminate a partially redundant load in a landing pad, it
will create a basic block that violates this constraint. It then leads to other
problems down the line if it tries to merge that basic block with the landing
pad. Avoid this by not eliminating the load in a landing pad.
PR17621
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193064 91177308-0d34-0410-b5e6-96231b3b80d8
One optimization simplify-cfg performs is the converting of switches to
lookup tables if the switch has > 4 cases. This is done by:
1. Finding the max/min case value and calculating the switch case range.
2. Create a lookup table basic block.
3. Perform a check in the switch's BB to see if the input value is in
the switch's case range. If the input value satisfies said predicate
branch to the lookup table BB, otherwise branch to the switch's default
destination BB using the default value as the result.
The conditional check consists of subtracting the min case value of the
table from any input iN value and then ensuring that said value is
unsigned less than the size of the lookup table represented as an iN
value.
If the lookup table is a covered lookup table, the size of the table will be N
which is 0 as an iN value. Thus the comparison will be an `icmp ult` of an iN
value against 0 which is always false yielding the incorrect result.
This patch fixes this problem by recognizing if we have a covered lookup table
and if we do, unconditionally jumps to the lookup table BB since the covering
property of the lookup table implies no input values could not be handled by
said BB.
rdar://15268442
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193045 91177308-0d34-0410-b5e6-96231b3b80d8
This ensures that the prefix data is treated as part of the function for
the purpose of debug info. This provides a better debugging experience,
among other things by allowing a debug info client to correctly look up
a function in debug info given a function pointer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193042 91177308-0d34-0410-b5e6-96231b3b80d8
If the predecessor's being spliced into a landing pad, then we need the PHIs to
come first and the rest of the predecessor's code to come *after* the landing
pad instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193035 91177308-0d34-0410-b5e6-96231b3b80d8
SCEV currently fails to compute loop counts for nonunit stride
loops. This comes up frequently. It prevents loop optimization and
forces vectorization to insert extra loop checks.
For example:
void foo(int n, int *x) {
for (int i = 0; i < n; i += 3) {
x[i] = i;
x[i+1] = i+1;
x[i+2] = i+2;
}
}
We need to properly handle the case in which limit > INT_MAX-stride. In
the above case: n > INT_MAX-3. In this case the loop counter will step
beyond the limit and overflow at the same time. However, knowing that
signed integer overlow in undefined, we can assume the loop test
behavior is arbitrary after overflow. This obeys both C undefined
behavior rules, and the more strict LLVM poison value rules.
I'm finally fixing this in response to Hal Finkel's persistence.
The most probable reason that we never optimized this before is that
we were being careful to handle case where the developer expected a
side-effect free infinite loop relying on overflow:
for (int i = 0; i < n; i += s) {
++j;
}
return j;
If INT_MAX+1 is a multiple of s and n > INT_MAX-s, then we might
expect an infinite loop. However there are plenty of ways to achieve
this effect without relying on undefined behavior of signed overflow.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193015 91177308-0d34-0410-b5e6-96231b3b80d8
With this commit, all DIEs created in CompileUnit will be added to parents
inside the same function. Also make getOrCreateTemplateType|Value functions
private.
No functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193002 91177308-0d34-0410-b5e6-96231b3b80d8
This is another (final?) stab at making us able to parse our own asm output
on Windows.
Symbols on Windows often contain @'s and ?'s in their names. Our asm parser
didn't like this. ?'s were not allowed, and @'s were intepreted as trying to
reference PLT/GOT/etc.
We can't just add quotes around the bad names, since e.g. for MinGW, we use gas
to assemble, and it doesn't like quotes in some places (notably in .def
directives).
This commit makes us allow ?'s in symbol names, and @'s in symbol names for MS
assembly.
Differential Revision: http://llvm-reviews.chandlerc.com/D1978
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193000 91177308-0d34-0410-b5e6-96231b3b80d8
PR17168 describes a test case that fails when compiling for debug with
fast-isel. Investigation showed that the test was failing because a DBG_VALUE
machine instruction was placed prior to a PHI.
For this problem to occur requires the following:
* Compile for debug
* Compile with fast-isel
* In a block B, fast-isel must partially succeed before punting to DAG-isel
* B must start with a PHI
* The first unhandled node in the DAG must not generate a machine instruction
* A debug value with an order less than that of that first node exists
When all of these circumstances apply, the existing test that an instruction
was not inserted won't fire. Currently it tests whether the block is empty,
or whether the last instruction generated is a phi. When fast-isel has
partially succeeded, the last instruction generated will not be a phi.
Instead, we need to check whether the current insert position is immediately
following a phi. This patch adds that check, and adds the test case from the
PR as a regression test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192976 91177308-0d34-0410-b5e6-96231b3b80d8
There are targets that support i128 sized scalars but cannot emit
instructions that modify them directly. The proper thing to do is to
emit a libcall.
This fixes PR17481.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192957 91177308-0d34-0410-b5e6-96231b3b80d8
gcc diagnoses this:
warning: converting to non-pointer type 'unsigned int' from NULL
Also remove an empty statement.
No change in functionality.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192955 91177308-0d34-0410-b5e6-96231b3b80d8
This caused the clang-native-mingw32-win7 buildbot to break.
The assembler was complaining about the following lines that were showing up
in the asm for CrashRecoveryContext.cpp:
movl $"__ZL16ExceptionHandlerP19_EXCEPTION_POINTERS@4", 4(%eax)
calll "_AddVectoredExceptionHandler@8"
.def "__ZL16ExceptionHandlerP19_EXCEPTION_POINTERS@4";
"__ZL16ExceptionHandlerP19_EXCEPTION_POINTERS@4":
calll "_RemoveVectoredExceptionHandler@4"
Reverting for now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192940 91177308-0d34-0410-b5e6-96231b3b80d8
Makes the uses more terse and requires that they use a semicolon at the
end that helps editors indent proceeding lines correctly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192925 91177308-0d34-0410-b5e6-96231b3b80d8
This commit implements the correct lowering of the
COPY_STRUCT_BYVAL_I32 pseudo-instruction for thumb1 targets.
Previously, the lowering of COPY_STRUCT_BYVAL_I32 generated the
post-increment forms of ldr/ldrh/ldrb instructions. Thumb1 does not
have the post-increment form of these instructions so the generated
assembly contained invalid instructions.
Passing the generated assembly to gcc caused it to complain with an
error like this:
Error: cannot honor width suffix -- `ldrb r3,[r0],#1'
and the integrated assembler would generate an object file with an
invalid instruction encoding.
This commit contains a small test case that demonstrates the problem
with thumb1 targets as well as an expanded test case that more
throughly tests the lowering of byval struct passing for arm,
thumb1, and thumb2 targets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192916 91177308-0d34-0410-b5e6-96231b3b80d8
This commit refactors the lowering of the COPY_STRUCT_BYVAL_I32
pseudo-instruction in the ARM backend. We introduce a new helper
class that encapsulates all of the operations needed during the
lowering. The operations are implemented for each subtarget in
different subclasses. Currently only arm and thumb2 subtargets are
supported.
This refactoring was done to easily implement support for thumb1
subtargets. This initial patch does not add support for thumb1, but
is only a refactoring. A follow on patch will implement the support
for thumb1 subtargets.
No intended functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192915 91177308-0d34-0410-b5e6-96231b3b80d8
All of the Core API functions have versions which accept explicit context, in
addition to ones which work on global context. This commit adds functions
which accept explicit context to the Target API for consistency.
Patch by Peter Zotov
Differential Revision: http://llvm-reviews.chandlerc.com/D1912
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192913 91177308-0d34-0410-b5e6-96231b3b80d8
class. The instruction class includes the signed saturating doubling
multiply-add long, signed saturating doubling multiply-subtract long, and
the signed saturating doubling multiply long instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192908 91177308-0d34-0410-b5e6-96231b3b80d8
These were present in a previous version of the MSA spec but are not
present in the published version. There is no hardware that uses these
instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192888 91177308-0d34-0410-b5e6-96231b3b80d8
When canonicalizing dags according to the rule
(shl (zext (shr X, c1) ), c1) ==> (zext (shl (shr X, c1), c1))
remember to add the new shl dag to the DAGCombiner worklist of nodes.
If we don't explicitly add it to the worklist of nodes to visit, we
may not trigger later on the rule that folds the shift left + logical
shift right into a AND instruction with bitmask.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192883 91177308-0d34-0410-b5e6-96231b3b80d8
Define these three instructions in alphabetical order (like the rest of the
file).
No functional change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192880 91177308-0d34-0410-b5e6-96231b3b80d8
Consider the following:
typedef unsigned short ushort4U __attribute__((ext_vector_type(4),
aligned(2)));
typedef unsigned short ushort4 __attribute__((ext_vector_type(4)));
typedef unsigned short ushort8 __attribute__((ext_vector_type(8)));
typedef int int4 __attribute__((ext_vector_type(4)));
int4 __bbase_cvt_int(ushort4 v) {
ushort8 a;
a.lo = v;
return _mm_cvtepu16_epi32(a);
}
This generates the, not unreasonable, IR:
define <4 x i32> @foo0(double %v.coerce) nounwind ssp {
%tmp = bitcast double %v.coerce to <4 x i16>
%tmp1 = shufflevector <4 x i16> %tmp, <4 x i16> undef, <8 x i32> <i32
%0, i32 1, i32 2, i32 3, i32 undef, i32 undef, i32 undef, i32 undef>
%tmp2 = tail call <4 x i32> @llvm.x86.sse41.pmovzxwd(<8 x i16> %tmp1)
ret <4 x i32> %tmp2
}
The problem is when type legalization gets hold of the v4i16. It
legalizes that by spilling to the stack, then doing a zero-extending
load. Things go even more silly from there, ending up with something
like:
_foo0:
movsd %xmm0, -8(%rsp) <== Spill to the stack.
movq -8(%rsp), %xmm0 <== Reload it right back out.
pmovzxwd %xmm0, %xmm1 <== Here's what we actually asked for.
pblendw $1, %xmm1, %xmm0 <== We don't need this at all
pmovzxwd %xmm0, %xmm0 <== We already did this
ret
The v8i8 to v8i16 zext intrinsic gives even worse results, with two
table lookups via pshufb instructions(!!).
To avoid all that, we can move the bitcasting until after we've formed
the wider (legal) vector type. Then our normal codegen flows along
nicely and we get the expected:
_foo0:
pmovzxwd %xmm0, %xmm0
ret
rdar://15245794
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192866 91177308-0d34-0410-b5e6-96231b3b80d8
like C++ should be the fully qualified names for the type.
Add a routine that does a language specific context walk to build
up the qualified name and use it when we add types/names to the
tables. Expand the gnu pubnames testcase as it's the most complex
to make sure that qualified types are also being added.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192865 91177308-0d34-0410-b5e6-96231b3b80d8
I expose the API with some caveats:
- The C++ API involves a traditional void* opaque pointer for the fatal
error callback. The C API doesn’t do this. I don’t think that the void*
opaque pointer makes any sense since this is a global callback - there will
only be one of them. So if you need to pass some data to your callback,
just put it in a global variable.
- The bindings will ignore the gen_crash_diag boolean. I ignore it because
(1) I don’t know what it does, (2) it’s not documented AFAIK, and (3) I
couldn’t imagine any use for it. I made the gut call that it probably
wasn’t important enough to expose through the C API.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192864 91177308-0d34-0410-b5e6-96231b3b80d8
The reason this got reverted was that the @feat.00 symbol which was emitted
for every TU became quoted, and on cygwin/mingw we use the gas assembler which
couldn't handle the quotes.
This commit fixes the problem by only emitting @feat.00 for win32, where we use
clang -cc1as to assemble. gas would just drop this symbol anyway, so there is no
loss there.
With @feat.00 gone, there shouldn't be quoted symbols showing up on cygwin since
it uses the Itanium ABI, which doesn't put these funny characters in symbols.
> Because of win32 mangling, we produce symbol and section names with
> funny characters in them, most notably @ characters.
>
> MC would choke on trying to parse its own assembly output. This patch addresses
> that by:
>
> - Making @ trigger quoting of symbol names
> - Also quote section names in the same way
> - Just parse section names like other identifiers (to allow for quotes)
> - Don't assume @ signifies a symbol variant if it is in a string.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192859 91177308-0d34-0410-b5e6-96231b3b80d8
This patch fixes a small mistake in MCDataAtom::addData() where it doesn't ever
call remap():
- if (Data.size() > Begin - End - 1)
+ if (Data.size() > End + 1 - Begin)
remap(Begin, End + 1);
This is currently not visible because of another bug is the disassembler, so
the patch includes a unit test.
Patch by Stephen Checkoway.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192823 91177308-0d34-0410-b5e6-96231b3b80d8
We were calling llvm_unreachable() when failing to optimize the
branch into if case. However, it is still possible for us
to structurize the CFG by duplicating blocks even if this optimization
fails.
Reviewed-by: Vincent Lejeune<vljn at ovi.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192813 91177308-0d34-0410-b5e6-96231b3b80d8
Before this patch we would assert when building llvm as multiple shared
libraries (cmake's BUILD_SHARED_LIBS). The problem was the line
if (T.AsmStreamerCtorFn == Target::createDefaultAsmStreamer)
which returns false because of -fvisibility-inlines-hidden. It is easy
to fix just this one case, but I decided to try to also make the
registration more strict. It looks like the old logic for ignoring
followup registration was just a temporary hack that outlived its
usefulness.
This patch converts the ifs to asserts, fixes the few cases that were
registering twice and makes sure all the asserts compare with null.
Thanks for Joerg for reporting the problem and reviewing the patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192803 91177308-0d34-0410-b5e6-96231b3b80d8
This happens e.g. with <2 x i64> -1 on x86_32. It cannot be generated directly
because i64 is illegal. It would be nice if getNOT would handle this
transparently, but I don't see a way to generate a legal constant there right
now. Fixes PR17487.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192795 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Given a global array G[N], which is declared in this CU and has static initializer
avoid instrumenting accesses like G[i], where 'i' is a constant and 0<=i<N.
Also add a bit of stats.
This eliminates ~1% of instrumentations on SPEC2006
and also partially helps when asan is being run together with coverage.
Reviewers: samsonov
Reviewed By: samsonov
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D1947
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192794 91177308-0d34-0410-b5e6-96231b3b80d8
The input to an RxSBG operation can be narrower as long as the upper bits
are don't care. This fixes a FIXME added in r192783.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192790 91177308-0d34-0410-b5e6-96231b3b80d8
We previously used the default expansion to SELECT_CC, which in turn would
expand to "LHI; BRC; LHI". In most cases it's better to use an IPM-based
sequence instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192784 91177308-0d34-0410-b5e6-96231b3b80d8
This is really an extension of the current (shl (shr ...)) -> shl optimization.
The main difference is that certain upper bits must also not be demanded.
The motivating examples are the first two in the testcase, which occur
in llvmpipe output.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192783 91177308-0d34-0410-b5e6-96231b3b80d8
This deletes the Module ivar instead of having the LTO code generater do it. It
also sets the pointer to 'NULL', so that if it's used again it will abort
quickly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192778 91177308-0d34-0410-b5e6-96231b3b80d8
GNU AS didn't like quotes in symbol names.
Error: junk at end of line, first unrecognized character is `"'
.def "@feat.00";
"@feat.00" = 1
Reproduced on Cygwin's 2.23.52.20130309 and mingw32's 2.20.1.20100303.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192775 91177308-0d34-0410-b5e6-96231b3b80d8
1) Make sure we emit static member variables by checking
at the end of createGlobalVariableDIE rather than piecemeal
in the function.
(As a note, createGlobalVariableDIE needs rewriting.)
2) Make sure we use the definition rather than declaration DIE
for two things: a) determining linkage for gnu pubnames, and b)
as the address of the DIE for global variables.
(As a note, createGlobalVariableDIE really needs rewriting.)
Adjust the testcase to make sure we're checking the correct DIEs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192761 91177308-0d34-0410-b5e6-96231b3b80d8
Because of win32 mangling, we produce symbol and section names with
funny characters in them, most notably @ characters.
MC would choke on trying to parse its own assembly output. This patch addresses
that by:
- Making @ trigger quoting of symbol names
- Also quote section names in the same way
- Just parse section names like other identifiers (to allow for quotes)
- Don't assume @ signifies a symbol variant if it is in a string.
Differential Revision: http://llvm-reviews.chandlerc.com/D1945
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192758 91177308-0d34-0410-b5e6-96231b3b80d8
