Summary:
This was a longstanding FIXME and is a necessary precursor to cases
where foldOperandImpl may have to create more than one instruction
(e.g. to constrain a register class). This is the split out NFC changes from
D6262.
Reviewers: pete, ributzka, uweigand, mcrosier
Reviewed By: mcrosier
Subscribers: mcrosier, ted, llvm-commits
Differential Revision: http://reviews.llvm.org/D10174
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239336 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This is the first of several patches to eliminate StringRef forms of GNU
triples from the internals of LLVM. After this is complete, GNU triples
will be replaced by a more authoratitive representation in the form of
an LLVM TargetTuple.
Reviewers: rengolin
Reviewed By: rengolin
Subscribers: ted, llvm-commits, rengolin, jholewinski
Differential Revision: http://reviews.llvm.org/D10236
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239036 91177308-0d34-0410-b5e6-96231b3b80d8
This is important because of different addressing modes
depending on the address space for GPU targets.
This only adds the argument, and does not update
any of the uses to provide the correct address space.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238723 91177308-0d34-0410-b5e6-96231b3b80d8
This was previously returning int. However there are no negative opcode
numbers and more importantly this was needlessly different from
MCInstrDesc::getOpcode() (which even is the value returned here) and
SDValue::getOpcode()/SDNode::getOpcode().
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237611 91177308-0d34-0410-b5e6-96231b3b80d8
warning: enumeral and non-enumeral type in conditional expression
Cast the 0 to the appropriate type. NFC. Identified by GCC 4.9.2
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236942 91177308-0d34-0410-b5e6-96231b3b80d8
This adds intrinsics to allow access to all of the z13 vector instructions.
Note that instructions whose semantics can be described by standard LLVM IR
do not get any intrinsics.
For each instructions whose semantics *cannot* (fully) be described, we
define an LLVM IR target-specific intrinsic that directly maps to this
instruction.
For instructions that also set the condition code, the LLVM IR intrinsic
returns the post-instruction CC value as a second result. Instruction
selection will attempt to detect code that compares that CC value against
constants and use the condition code directly instead.
Based on a patch by Richard Sandiford.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236527 91177308-0d34-0410-b5e6-96231b3b80d8
The ABI specifies that <1 x i128> and <1 x fp128> are supposed to be
passed in vector registers. We do not yet support those types, and
some infrastructure is missing before we can do so.
In order to prevent accidentally generating code violating the ABI,
this patch adds checks to detect those types and error out if user
code attempts to use them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236526 91177308-0d34-0410-b5e6-96231b3b80d8
The ABI allows sub-128 vectors to be passed and returned in registers,
with the vector occupying the upper part of a register. We therefore
want to legalize those types by widening the vector rather than promoting
the elements.
The patch includes some simple tests for sub-128 vectors and also tests
that we can recognize various pack sequences, some of which use sub-128
vectors as temporary results. One of these forms is based on the pack
sequences generated by llvmpipe when no intrinsics are used.
Signed unpacks are recognized as BUILD_VECTORs whose elements are
individually sign-extended. Unsigned unpacks can have the equivalent
form with zero extension, but they also occur as shuffles in which some
elements are zero.
Based on a patch by Richard Sandiford.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236525 91177308-0d34-0410-b5e6-96231b3b80d8
The z13 vector facility includes some instructions that operate only on the
high f64 in a v2f64, effectively extending the FP register set from 16
to 32 registers. It's still better to use the old instructions if the
operands happen to fit though, since the older instructions have a shorter
encoding.
Based on a patch by Richard Sandiford.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236524 91177308-0d34-0410-b5e6-96231b3b80d8
The architecture doesn't really have any native v4f32 operations except
v4f32->v2f64 and v2f64->v4f32 conversions, with only half of the v4f32
elements being used. Even so, using vector registers for <4 x float>
and scalarising individual operations is much better than generating
completely scalar code, since there's much less register pressure.
It's also more efficient to do v4f32 comparisons by extending to 2
v2f64s, comparing those, then packing the result.
This particularly helps with llvmpipe.
Based on a patch by Richard Sandiford.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236523 91177308-0d34-0410-b5e6-96231b3b80d8
This adds ABI and CodeGen support for the v2f64 type, which is natively
supported by z13 instructions.
Based on a patch by Richard Sandiford.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236522 91177308-0d34-0410-b5e6-96231b3b80d8
This the first of a series of patches to add CodeGen support exploiting
the instructions of the z13 vector facility. This patch adds support
for the native integer vector types (v16i8, v8i16, v4i32, v2i64).
When the vector facility is present, we default to the new vector ABI.
This is characterized by two major differences:
- Vector types are passed/returned in vector registers
(except for unnamed arguments of a variable-argument list function).
- Vector types are at most 8-byte aligned.
The reason for the choice of 8-byte vector alignment is that the hardware
is able to efficiently load vectors at 8-byte alignment, and the ABI only
guarantees 8-byte alignment of the stack pointer, so requiring any higher
alignment for vectors would require dynamic stack re-alignment code.
However, for compatibility with old code that may use vector types, when
*not* using the vector facility, the old alignment rules (vector types
are naturally aligned) remain in use.
These alignment rules are not only implemented at the C language level
(implemented in clang), but also at the LLVM IR level. This is done
by selecting a different DataLayout string depending on whether the
vector ABI is in effect or not.
Based on a patch by Richard Sandiford.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236521 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds support for the z13 processor type and its vector facility,
and adds MC support for all new instructions provided by that facilily.
Apart from defining the new instructions, the main changes are:
- Adding VR128, VR64 and VR32 register classes.
- Making FP64 a subclass of VR64 and FP32 a subclass of VR32.
- Adding a D(V,B) addressing mode for scatter/gather operations
- Adding 1-, 2-, and 3-bit immediate operands for some 4-bit fields.
Until now all immediate operands have been the same width as the
underlying field (hence the assert->return change in decode[SU]ImmOperand).
In addition, sys::getHostCPUName is extended to detect running natively
on a z13 machine.
Based on a patch by Richard Sandiford.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236520 91177308-0d34-0410-b5e6-96231b3b80d8
This patch introduces a new pass that computes the safe point to insert the
prologue and epilogue of the function.
The interest is to find safe points that are cheaper than the entry and exits
blocks.
As an example and to avoid regressions to be introduce, this patch also
implements the required bits to enable the shrink-wrapping pass for AArch64.
** Context **
Currently we insert the prologue and epilogue of the method/function in the
entry and exits blocks. Although this is correct, we can do a better job when
those are not immediately required and insert them at less frequently executed
places.
The job of the shrink-wrapping pass is to identify such places.
** Motivating example **
Let us consider the following function that perform a call only in one branch of
a if:
define i32 @f(i32 %a, i32 %b) {
%tmp = alloca i32, align 4
%tmp2 = icmp slt i32 %a, %b
br i1 %tmp2, label %true, label %false
true:
store i32 %a, i32* %tmp, align 4
%tmp4 = call i32 @doSomething(i32 0, i32* %tmp)
br label %false
false:
%tmp.0 = phi i32 [ %tmp4, %true ], [ %a, %0 ]
ret i32 %tmp.0
}
On AArch64 this code generates (removing the cfi directives to ease
readabilities):
_f: ; @f
; BB#0:
stp x29, x30, [sp, #-16]!
mov x29, sp
sub sp, sp, #16 ; =16
cmp w0, w1
b.ge LBB0_2
; BB#1: ; %true
stur w0, [x29, #-4]
sub x1, x29, #4 ; =4
mov w0, wzr
bl _doSomething
LBB0_2: ; %false
mov sp, x29
ldp x29, x30, [sp], #16
ret
With shrink-wrapping we could generate:
_f: ; @f
; BB#0:
cmp w0, w1
b.ge LBB0_2
; BB#1: ; %true
stp x29, x30, [sp, #-16]!
mov x29, sp
sub sp, sp, #16 ; =16
stur w0, [x29, #-4]
sub x1, x29, #4 ; =4
mov w0, wzr
bl _doSomething
add sp, x29, #16 ; =16
ldp x29, x30, [sp], #16
LBB0_2: ; %false
ret
Therefore, we would pay the overhead of setting up/destroying the frame only if
we actually do the call.
** Proposed Solution **
This patch introduces a new machine pass that perform the shrink-wrapping
analysis (See the comments at the beginning of ShrinkWrap.cpp for more details).
It then stores the safe save and restore point into the MachineFrameInfo
attached to the MachineFunction.
This information is then used by the PrologEpilogInserter (PEI) to place the
related code at the right place. This pass runs right before the PEI.
Unlike the original paper of Chow from PLDI’88, this implementation of
shrink-wrapping does not use expensive data-flow analysis and does not need hack
to properly avoid frequently executed point. Instead, it relies on dominance and
loop properties.
The pass is off by default and each target can opt-in by setting the
EnableShrinkWrap boolean to true in their derived class of TargetPassConfig.
This setting can also be overwritten on the command line by using
-enable-shrink-wrap.
Before you try out the pass for your target, make sure you properly fix your
emitProlog/emitEpilog/adjustForXXX method to cope with basic blocks that are not
necessarily the entry block.
** Design Decisions **
1. ShrinkWrap is its own pass right now. It could frankly be merged into PEI but
for debugging and clarity I thought it was best to have its own file.
2. Right now, we only support one save point and one restore point. At some
point we can expand this to several save point and restore point, the impacted
component would then be:
- The pass itself: New algorithm needed.
- MachineFrameInfo: Hold a list or set of Save/Restore point instead of one
pointer.
- PEI: Should loop over the save point and restore point.
Anyhow, at least for this first iteration, I do not believe this is interesting
to support the complex cases. We should revisit that when we motivating
examples.
Differential Revision: http://reviews.llvm.org/D9210
<rdar://problem/3201744>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236507 91177308-0d34-0410-b5e6-96231b3b80d8
At the moment, all subregs defined by the SystemZ target can be modified
independently of the wider register. E.g. writing to a GR32 does not
change the upper 32 bits of the GR64. Writing to an FP32 does not change
the lower 32 bits of the FP64.
Hoewver, the upcoming support for the vector extension redefines FP64 as
one half of a V128. Floating-point operations leave the other half of
a V128 in an unpredictable state, so it's no longer the case that writing
to an FP32 leaves the bits of the underlying register (the V128) alone.
I'd prefer to have separate subreg_ names for this situation, so that
it's obvious at a glance whether we're talking about a subreg that leaves
the other parts of the register alone.
No behavioral change intended.
Patch originally by Richard Sandiford.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236433 91177308-0d34-0410-b5e6-96231b3b80d8
We know what MemoryKind an operand has at the time we construct it,
so we might as well just record it in an unused part of the structure.
This makes it easier to add scatter/gather addresses later.
No behavioral change intended.
Patch originally by Richard Sandiford.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236432 91177308-0d34-0410-b5e6-96231b3b80d8
It seems SystemZTargetLowering::getTargetNodeName got out of sync with
some recent changes to the SystemZISD opcode list. Add back all the
missing opcodes (and re-sort to the same order as SystemISelLowering.h).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236430 91177308-0d34-0410-b5e6-96231b3b80d8
[DebugInfo] Add debug locations to constant SD nodes
This adds debug location to constant nodes of Selection DAG and updates
all places that create constants to pass debug locations
(see PR13269).
Can't guarantee that all locations are correct, but in a lot of cases choice
is obvious, so most of them should be. At least all tests pass.
Tests for these changes do not cover everything, instead just check it for
SDNodes, ARM and AArch64 where it's easy to get incorrect locations on
constants.
This is not complete fix as FastISel contains workaround for wrong debug
locations, which drops locations from instructions on processing constants,
but there isn't currently a way to use debug locations from constants there
as llvm::Constant doesn't cache it (yet). Although this is a bit different
issue, not directly related to these changes.
Differential Revision: http://reviews.llvm.org/D9084
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235989 91177308-0d34-0410-b5e6-96231b3b80d8
This adds debug location to constant nodes of Selection DAG and updates
all places that create constants to pass debug locations
(see PR13269).
Can't guarantee that all locations are correct, but in a lot of cases choice
is obvious, so most of them should be. At least all tests pass.
Tests for these changes do not cover everything, instead just check it for
SDNodes, ARM and AArch64 where it's easy to get incorrect locations on
constants.
This is not complete fix as FastISel contains workaround for wrong debug
locations, which drops locations from instructions on processing constants,
but there isn't currently a way to use debug locations from constants there
as llvm::Constant doesn't cache it (yet). Although this is a bit different
issue, not directly related to these changes.
Differential Revision: http://reviews.llvm.org/D9084
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235977 91177308-0d34-0410-b5e6-96231b3b80d8
AsmPrinter owns the OutStreamer, so an owning pointer makes sense here. Using a
reference for this is crufty.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235752 91177308-0d34-0410-b5e6-96231b3b80d8
The patch is generated using clang-tidy misc-use-override check.
This command was used:
tools/clang/tools/extra/clang-tidy/tool/run-clang-tidy.py \
-checks='-*,misc-use-override' -header-filter='llvm|clang' \
-j=32 -fix -format
http://reviews.llvm.org/D8925
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234679 91177308-0d34-0410-b5e6-96231b3b80d8
This also moves it earlier so that it they are produced before we print
an end symbol for the data section.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234315 91177308-0d34-0410-b5e6-96231b3b80d8
Change lowerCTPOP to:
- Gracefully handle a known-zero input value
- Simplify computation of significant bit size
Thanks to Jay Foad for the review!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233736 91177308-0d34-0410-b5e6-96231b3b80d8
So far, we do not yet support any instruction specific to zEC12.
Most of the facilities added with zEC12 are indeed not very useful
to compiler code generation, but there is one exception: the
miscellaneous-extensions facility provides the RISBGN instruction,
which is a variant of RISBG that does not set the condition code.
Add support for this facility, MC support for RISBGN, and CodeGen
support for prefering RISBGN over RISBG on zEC12, unless we can
actually make use of the condition code set by RISBG.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233690 91177308-0d34-0410-b5e6-96231b3b80d8
We already exploit a number of instructions specific to z196,
but not yet POPCNT. Add support for the population-count
facility, MC support for the POPCNT instruction, CodeGen
support for using POPCNT, and implement the getPopcntSupport
TargetTransformInfo hook.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233689 91177308-0d34-0410-b5e6-96231b3b80d8
This hooks up the TargetTransformInfo machinery for SystemZ,
and provides an implementation of getIntImmCost.
In addition, the patch adds the isLegalICmpImmediate and
isLegalAddImmediate TargetLowering overrides, and updates
a couple of test cases where we now generate slightly
better code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233688 91177308-0d34-0410-b5e6-96231b3b80d8
Compiling the following function with -O0 would crash, since LLVM would
hit an assertion in getTestUnderMaskCond:
int test(unsigned long x)
{
return x >= 0 && x <= 15;
}
Fixed by detecting the case in the caller of getTestUnderMaskCond.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233541 91177308-0d34-0410-b5e6-96231b3b80d8
per-function subtarget.
Currently, code-gen passes the default or generic subtarget to the constructors
of MCInstPrinter subclasses (see LLVMTargetMachine::addPassesToEmitFile), which
enables some targets (AArch64, ARM, and X86) to change their instprinter's
behavior based on the subtarget feature bits. Since the backend can now use
different subtargets for each function, instprinter has to be changed to use the
per-function subtarget rather than the default subtarget.
This patch takes the first step towards enabling instprinter to change its
behavior based on the per-function subtarget. It adds a bit "PassSubtarget" to
AsmWriter which tells table-gen to pass a reference to MCSubtargetInfo to the
various print methods table-gen auto-generates.
I will follow up with changes to instprinters of AArch64, ARM, and X86.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233411 91177308-0d34-0410-b5e6-96231b3b80d8
TargetMachine::getSubtargetImpl routines.
This keeps the target independent code free of bare subtarget
calls while the remainder of the backends are migrated, or not
if they don't wish to support per-function subtargets as would
be needed for function multiversioning or LTO of disparate
cpu subarchitecture types, e.g.
clang -msse4.2 -c foo.c -emit-llvm -o foo.bc
clang -c bar.c -emit-llvm -o bar.bc
llvm-link foo.bc bar.bc -o baz.bc
llc baz.bc
and get appropriate code for what the command lines requested.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232885 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
But still handle them the same way since I don't know how they differ on
this target.
No functional change intended.
Reviewers: uweigand
Reviewed By: uweigand
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8251
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232495 91177308-0d34-0410-b5e6-96231b3b80d8
