Unlike 32-bit ARM, AArch64 can use wzr/xzr to implement this without the need
for a separate instruction.
rdar://18679590
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236245 91177308-0d34-0410-b5e6-96231b3b80d8
This matches other assemblers and is less unexpected (e.g. PR23227).
On ELF, I tried binutils gas v2.24 and nasm 2.10.09, and they both
agree on LShr. On COFF, I couldn't get my hands on an assembler yet,
so don't change the behavior. For now, don't change it on non-AArch64
Darwin either, as the other assembler is gas v1.38, which does an AShr.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235963 91177308-0d34-0410-b5e6-96231b3b80d8
Many of these predate llvm-readobj. With elf-dump we had to match
a relocation to symbol number and symbol number to symbol name or
section number.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235015 91177308-0d34-0410-b5e6-96231b3b80d8
We weren't checking the sign of the floating point immediate before translating
it to "fmov sD, wzr". Similarly for D-regs.
Technically "movi vD.2s, #0x80, lsl #24" would work most of the time, but it's
not a blessed alias (and I don't think it should be since people expect writing
sD to zero out the high lanes, and there's no dD equivalent). So an error it is.
rdar://20455398
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234372 91177308-0d34-0410-b5e6-96231b3b80d8
Essentially the same as the GEP change in r230786.
A similar migration script can be used to update test cases, though a few more
test case improvements/changes were required this time around: (r229269-r229278)
import fileinput
import sys
import re
pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)")
for line in sys.stdin:
sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line))
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7649
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230794 91177308-0d34-0410-b5e6-96231b3b80d8
The ARM assembler allows register alias redefinitions as long as it
targets the same register. r222319 broke that. In the AArch64 case
it would just produce a new warning, but in the ARM case it would
error out on previously accepted assembler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228109 91177308-0d34-0410-b5e6-96231b3b80d8
This mostly entails adding relocations, however there are a couple of
changes to existing relocations:
1. R_AARCH64_NONE is defined to be zero rather than 256
R_AARCH64_NONE has been defined to be zero for a long time elsewhere
e.g. binutils and glibc since the submission of the AArch64 port in
2012 so this is required for compatibility.
2. R_AARCH64_TLSDESC_ADR_PAGE renamed to R_AARCH64_TLSDESC_ADR_PAGE21
I don't think there is any way for relocation names to leak out of LLVM
so this should not break anything.
Tested with check-all with no regressions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222821 91177308-0d34-0410-b5e6-96231b3b80d8
The A64 instruction set includes a generic register syntax for accessing
implementation-defined system registers. The syntax for these registers is:
S<op0>_<op1>_<CRn>_<CRm>_<op2>
The encoding space permitted for implementation-defined system registers
is:
op0 op1 CRn CRm op2
11 xxx 1x11 xxxx xxx
The full encoding space can now be accessed:
op0 op1 CRn CRm op2
xx xxx xxxx xxxx xxx
This is useful to anyone needing to write assembly code supporting new
system registers before the assembler has learned the official names for
them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218753 91177308-0d34-0410-b5e6-96231b3b80d8
e.g., add w1, w2, w3, lsl #(2 - 1)
This sort of thing comes up in pre-processed assembly playing macro games.
Still validate that it's an assembly time constant. The early exit error check
was just a bit overzealous and disallowed a left paren.
rdar://18430542
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218336 91177308-0d34-0410-b5e6-96231b3b80d8
As X86MCAsmInfoDarwin uses '##' as CommentString although a single '#' starts a
comment a workaround for this special case is added.
Fixes divisions in constant expressions for the AArch64 assembler and other
targets which use '//' as CommentString.
Patch by Janne Grunau!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215615 91177308-0d34-0410-b5e6-96231b3b80d8
There really is no arm64_be: it was a useful fiction to test big-endian support
while both backends existed in parallel, but now the only platform that uses
the name (iOS) doesn't have a big-endian variant, let alone one called
"arm64_be".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213748 91177308-0d34-0410-b5e6-96231b3b80d8
On AArch64 the pseudo instruction ldr <reg>, =... supports both
32-bit and 64-bit constants. Add support for 64 bit constants for
the pools to support the pseudo instruction fully.
Changes the AArch64 ldr-pseudo tests to use 32-bit registers and
adds tests with 64-bit registers.
Patch by Janne Grunau!
Differential Revision: http://reviews.llvm.org/D4279
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213387 91177308-0d34-0410-b5e6-96231b3b80d8
LDP is unpredictable if the registers in the pair are identical, these tests check that we don't assemble instructions like that and error out instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213074 91177308-0d34-0410-b5e6-96231b3b80d8
This patch teaches the AsmParser to accept some logical+immediate
instructions and convert them as shown:
bic Rd, Rn, #imm -> and Rd, Rn, #~imm
bics Rd, Rn, #imm -> ands Rd, Rn, #~imm
orn Rd, Rn, #imm -> orr Rd, Rn, #~imm
eon Rd, Rn, #imm -> eor Rd, Rn, #~imm
Those instructions are an alternate syntax available to assembly coders,
and are needed in order to support code already compiling with some other
assemblers. For example, the bic construct is used by the linux kernel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212722 91177308-0d34-0410-b5e6-96231b3b80d8
There were two issues here:
1. At the very least, scattered relocations cannot use the same code to
determine the corresponding symbol being referred to. For some reason we
pretend there is no symbol, even when one actually exists in the symtab, so to
match this behaviour getRelocationSymbol should simply return symbols_end for
scattered relocations.
2. Printing "-" when we can't get a symbol (including the scattered case, but
not exclusively), isn't that helpful. In both cases there *is* interesting
information in that field, so we should print it. As hex will do.
Small part of rdar://problem/17553104
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212332 91177308-0d34-0410-b5e6-96231b3b80d8
Based on the support for .req on ARM. The aarch64 variant has to keep track if
the alias register was a vector register (v0-31) or a general purpose or
VFP/Advanced SIMD ([bhsdq]0-31) register.
Patch by Janne Grunau!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212161 91177308-0d34-0410-b5e6-96231b3b80d8
The test case in
"Fix PR20056: Implement pseudo LDR <reg>, =<literal/label> for AArch64" should
only work with Linux.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211613 91177308-0d34-0410-b5e6-96231b3b80d8
"Fix PR20056: Implement pseudo LDR <reg>, =<literal/label> for AArch64"
Missed files are added in this commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211605 91177308-0d34-0410-b5e6-96231b3b80d8
inverted condition codes (CINC, CINV, CNEG, CSET, and CSETM).
Matching aliases based on "immediate classes", when disassembling,
wasn't previously supported, hence adding MCOperandPredicate
into class Operand, and implementing the support for it
in AsmWriterEmitter.
The parsing for those aliases was already custom, so just adding
the missing condition into AArch64AsmParser::parseCondCode.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210528 91177308-0d34-0410-b5e6-96231b3b80d8
This commit starts with a "git mv ARM64 AArch64" and continues out
from there, renaming the C++ classes, intrinsics, and other
target-local objects for consistency.
"ARM64" test directories are also moved, and tests that began their
life in ARM64 use an arm64 triple, those from AArch64 use an aarch64
triple. Both should be equivalent though.
This finishes the AArch64 merge, and everyone should feel free to
continue committing as normal now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209577 91177308-0d34-0410-b5e6-96231b3b80d8
I'm doing this in two phases for a better "git blame" record. This
commit removes the previous AArch64 backend and redirects all
functionality to ARM64. It also deduplicates test-lines and removes
orphaned AArch64 tests.
The next step will be "git mv ARM64 AArch64" and rewire most of the
tests.
Hopefully LLVM is still functional, though it would be even better if
no-one ever had to care because the rename happens straight
afterwards.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209576 91177308-0d34-0410-b5e6-96231b3b80d8
This changes ARM64 to use separate operands for each component of an
address, and look for separate '[', '$Rn, ..., ']' tokens when
parsing.
This allows us to do away with quite a bit of special C++ code to
handle monolithic "addressing modes" in the MC components. The more
incremental matching of the assembler operands also allows for better
diagnostics when LLVM is presented with invalid input.
Most of the complexity here is with the register-offset instructions,
which were extremely dodgy beforehand: even when the instruction used
wM, LLVM's model had xM as an operand. We papered over this
discrepancy before, but that approach doesn't work now so I split them
into separate X and W variants.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209425 91177308-0d34-0410-b5e6-96231b3b80d8
When multiple aliases overlap, the correct string to print can often be
determined purely by considering the InstAlias declarations in some particular
order. This allows the user to specify that order manually when desired,
without resorting to hacking around with the default lexicographical order on
Record instantiation, which is error-prone and ugly.
I was also mistaken about "add w2, w3, w4" being the same as "add w2, w3, w4,
uxtw". That's only true if Rn is the stack pointer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209199 91177308-0d34-0410-b5e6-96231b3b80d8
TableGen has a fairly dubious heuristic to decide whether an alias should be
printed: does the alias have lest operands than the real instruction. This is
bad enough (particularly with no way to override it), but it should at least be
calculated consistently for both strings.
This patch implements that logic: first get the *correct* string for the
variant, in the same way as the Matcher, without guessing; then count the
number of whitespace chars.
There are basically 4 changes this brings about after the previous
commits; all of these appear to be good, so I have changed the tests:
+ ARM64: we print "neg X, Y" instead of "sub X, xzr, Y".
+ ARM64: we skip implicit "uxtx" and "uxtw" modifiers.
+ Sparc: we print "mov A, B" instead of "or %g0, A, B".
+ Sparc: we print "fcmpX A, B" instead of "fcmpX %fcc0, A, B"
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208969 91177308-0d34-0410-b5e6-96231b3b80d8
In all cases, if a "mov" alias exists, it is the canonical form of the
instruction. Now that TableGen can support aliases containing syntax variants,
we can enable them and improve the quality of the asm output.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208874 91177308-0d34-0410-b5e6-96231b3b80d8
To get at least one use of the change (and some actual tests) in with its
commit, I've enabled the AArch64 & ARM64 NEON mov aliases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208867 91177308-0d34-0410-b5e6-96231b3b80d8
Obviously we can't expect the two backends to produce identical diagnostics,
since what's possible depends quite a bit on how the .td files are structured.
I think the ARM64 diagnostics are basically of the same quality in all the
changed cases, so I've split the CHECK lines.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208084 91177308-0d34-0410-b5e6-96231b3b80d8
The canonical form of the BFM instruction is always one of the more explicit
extract or insert operations, which makes reading output much easier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207752 91177308-0d34-0410-b5e6-96231b3b80d8
We already do this for shstrtab, so might as well do it for strtab. This
extracts the string table building code into a separate class. The idea
is to use it for other object formats too.
I mostly wanted to do this for the general principle, but it does save a
little bit on object file size. I tried this on a clang bootstrap and
saved 0.54% on the sum of object file sizes (1.14 MB out of 212 MB for
a release build).
Differential Revision: http://reviews.llvm.org/D3533
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207670 91177308-0d34-0410-b5e6-96231b3b80d8
It's been decided that in the future, the floating-point immediate in
instructions like "fcmeq v0.2s, v1.2s, #0.0" will be canonically "0.0", which
has been implemented on AArch64 already but not ARM64.
This fixes that issue.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207666 91177308-0d34-0410-b5e6-96231b3b80d8
