section.
This helps because in practice sections form a dag with debug sections pointing
to text sections. Finishing up the text sections first makes the debug section
relaxation trivial.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122314 91177308-0d34-0410-b5e6-96231b3b80d8
IsSymbolRefDifferenceFullyResolved, it turns out this does change behavior on
enough cases for x86-32 that I would rather wait a bit on it.
- In practice, we will want to change this eventually because it only means we
generate less relocations (it also eliminates the need for the horrible
'.set' hack that Darwin requires in some places).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122042 91177308-0d34-0410-b5e6-96231b3b80d8
the MCCodeEmitter, which seems like a better organization.
- Also, cleaned up some magic constants while in the area.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121953 91177308-0d34-0410-b5e6-96231b3b80d8
With this we don't need the EffectiveSize field anymore. Without that field
LayoutFragment only updates offsets and we don't need to invalidate the
current fragment when it is relaxed (only the ones following it).
This is also a very small improvement in the accuracy of the layout info as
we now use the after relaxation size immediately.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121857 91177308-0d34-0410-b5e6-96231b3b80d8
the offset. Add a new fixup flag to represent this, and use it for the one fixups that I have a testcase for needing
this. It's quite likely that the other Thumb fixups will need this too, and to have their fixup encoding logic
adjusted accordingly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121408 91177308-0d34-0410-b5e6-96231b3b80d8
before:
4 assembler - Number of assembler layout and relaxation steps
78563 assembler - Number of emitted assembler fragments
8693904 assembler - Number of emitted object file bytes
271223 assembler - Number of evaluated fixups
330771677 assembler - Number of fragment layouts
5958 assembler - Number of relaxed instructions
2508361 mcexpr - Number of MCExpr evaluations
real 0m26.123s
user 0m25.694s
sys 0m0.388s
after:
4 assembler - Number of assembler layout and relaxation steps
78563 assembler - Number of emitted assembler fragments
8693904 assembler - Number of emitted object file bytes
271223 assembler - Number of evaluated fixups
231507 assembler - Number of fragment layouts
5958 assembler - Number of relaxed instructions
2508361 mcexpr - Number of MCExpr evaluations
real 0m2.500s
user 0m2.113s
sys 0m0.273s
And yes, the outputs are identical :-)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121207 91177308-0d34-0410-b5e6-96231b3b80d8
actuall addresses in a .o file, so it is better to let the MachO writer compute
it.
This is good for two reasons. First, areas that shouldn't care about
addresses now don't have access to it. Second, the layout of each section
is independent. I should use this in a subsequent commit to speed it up.
Most of the patch is just removing the section address computation. The two
interesting parts are the change on how we handle padding in the end
of sections and how MachO can get the address of a-b when a and b are in
different sections.
Since now the expression evaluation normally doesn't know the section address,
it will think that a-b needs relocation and let the MachO writer know. Once
it has computed the section addresses, it calls back the expression evaluation
with the section addresses to resolve these expressions.
The remaining problem is the handling of padding. Currently it will create
a special alignment fragment at the end. Since that fragment doesn't update
the alignment of the section, it needs the real address to be computed.
Since now the layout will not compute a-b with a and b in different sections,
the only effect that the special alignment fragment has is update the
address size of the section. This can also be done by the MachO writer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121076 91177308-0d34-0410-b5e6-96231b3b80d8
as llc + llvm-mc. This time ELF is not changed and I tested that llvm-gcc
bootstrap on darwin10 using darwin9's assembler and linker.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121006 91177308-0d34-0410-b5e6-96231b3b80d8
foo = a - b
.long foo
instead of just
.long a - b
First, on darwin9 64 bits the assembler produces the wrong result. Second,
if "a" is the end of the section all darwin assemblers (9, 10 and mc) will not
consider a - b to be a constant but will if the dummy foo is created.
Split how we handle these cases. The first one is something MC should take care
of. The second one has to be handled by the caller.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120889 91177308-0d34-0410-b5e6-96231b3b80d8
doing that if the target is darwin10 or newer.
This fixes
*) Direct object emission was producing objects without the workaround on
darwin9.
*) Assembly printing was producing objects with the workaround on linux.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120866 91177308-0d34-0410-b5e6-96231b3b80d8
contain only data. Handle them specially instead of using AddSectionToTheEnd.
This moves a hack from the generic assembler to the elf writer. It is also
a bit faster and should make other improvements easier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120683 91177308-0d34-0410-b5e6-96231b3b80d8
MCStreamer instead of just MCObjectStreamer. Address changes cannot
be as efficient as we have to use DW_LNE_set_addres, but at least
most of the logic is shared.
This will be used so that, with CodeGen still using EmitDwarfLocDirective,
llvm-gcc is able to produce debug_line sections without needing an
assembler that supports .loc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119777 91177308-0d34-0410-b5e6-96231b3b80d8
and testing is easier. A good example is the unknown-location.ll test that
now can just look for ".loc 1 0 0". We also don't use a DW_LNE_set_address for
every address change anymore.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119613 91177308-0d34-0410-b5e6-96231b3b80d8
Next: Add support for the !HasDotLocAndDotFile case to the MCAsmStreamer
and then switch codegen to use it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119384 91177308-0d34-0410-b5e6-96231b3b80d8
variable if recursing fails to simplify it.
Factor AliasedSymbol to be a method of MCSymbol.
Update MCAssembler::EvaluateFixup to match the change in
EvaluateAsRelocatableImpl.
Remove the WeakRefExpr hack, as the object writer now sees the weakref with
no extra effort needed.
Nothing else is using MCTargetExpr, but keep it for now.
Now that the ELF writer sees relocations with aliases, handle
.weak foo2
foo2:
.weak bar2
.set bar2,foo2
.quad bar2
the same way gas does and produce a relocation with bar2.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119152 91177308-0d34-0410-b5e6-96231b3b80d8
This moves most of the isUsed logic to the MCSymbol itself. With this we
get a bit more relaxed about allowing definitions after uses: uses that
don't evaluate their argument immediately (jmp foo) are accepted.
ddunbar, this was the smallest compromise I could think of that lets us
accept gcc (and clang!) assembly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119144 91177308-0d34-0410-b5e6-96231b3b80d8
nodes to indicate when ha16/lo16 modifiers should be used. This lets
us pass PowerPC/indirectbr.ll.
The one annoying thing about this patch is that the MCSymbolExpr isn't
expressive enough to represent ha16(label1-label2) which we need on
PowerPC. I have a terrible hack in the meantime, but this will have
to be revisited at some point.
Last major conversion item left is global variable references.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119105 91177308-0d34-0410-b5e6-96231b3b80d8
on the operand, required for .o file writing and fixing
the PowerPC/mult-alt-generic-powerpc64.ll failure with the new
instprinter.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119087 91177308-0d34-0410-b5e6-96231b3b80d8
VariantKind marker to indicate the additional information necessary. Update
MC to handle the new Kinds. rdar://8647623
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@118671 91177308-0d34-0410-b5e6-96231b3b80d8
// FIXME: We should compute this sooner, we don't want to recurse here, and
// we would like to be more functional.
In MCAssembler::ComputeFragmentSize.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@118080 91177308-0d34-0410-b5e6-96231b3b80d8
single object format can be shared.
This also adds support for
mov zed+(bar-foo), %eax
on ELF and COFF targets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@116675 91177308-0d34-0410-b5e6-96231b3b80d8
Added ARM specific ELF section types.
Added AttributesSection to ARMElfTargetObject
First step in unifying .cpu assembly tag with ELF/.o
llc now asserts on actual ELF emission on -filetype=obj :-)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@116257 91177308-0d34-0410-b5e6-96231b3b80d8
they should be in the symbol table or not. Instead of "guessing", just compute
the symbol table after the relocations are known.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@115619 91177308-0d34-0410-b5e6-96231b3b80d8
1) Changed ValidateDwarfFileNumber() to isValidDwarfFileNumber() to be better
named. Since it is just a predicate and isn't actually changing any state.
2) Added a missing return in the comments for setCurrentDwarfLoc() in
include/llvm/MC/MCContext.h for fix formatting.
3) Changed clearDwarfLocSeen() to ClearDwarfLocSeen() since it does change
state.
4) Simplified the last test in isValidDwarfFileNumber() to just a one line
boolean test of MCDwarfFiles[FileNumber] != 0 for the final return statement.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@115551 91177308-0d34-0410-b5e6-96231b3b80d8
time. That way, the EntrySize field is initialized for other code paths,
namely, the .ll -> .o code path.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@115141 91177308-0d34-0410-b5e6-96231b3b80d8
resolved or not. Different object files have different restrictions and
different native assemblers have different idiosyncrasies we want to emulate
for now.
Move the existing MachO logic to the new place and implement an ELF one that
gets fixups to globals right.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@115131 91177308-0d34-0410-b5e6-96231b3b80d8
new VariantKind to the MCSymbolExpr seems like overkill, but I'm not sure
there's a more straightforward way to get the printing difference captured.
(i.e., x86 uses @PLT, ARM uses (PLT)).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@114613 91177308-0d34-0410-b5e6-96231b3b80d8
The ELF implementation now creates text, data and bss to match the gnu as
behavior.
The text streamer still has the old MachO specific behavior since
the testsuite checks that it will error when a directive is given
before a setting the current section for example.
A nice benefit is that -n is not required anymore when producing
ELF files.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@114027 91177308-0d34-0410-b5e6-96231b3b80d8
VFP instructions use it for loading some constants, so implement that
handling.
Not thrilled with adding a member to MCOperand, but not sure there's much of
a better option that's not pretty fragile (like putting a double in the
union instead and just assuming that's good enough). Suggestions welcome...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113996 91177308-0d34-0410-b5e6-96231b3b80d8
the end of the line on a parser error, allowing skipping to happen
for syntactic errors but not for semantic errors. Before we would
miss emitting a diagnostic about the second line, because we skipped
it due to the semantic error on the first line:
foo %eax
bar %al
This fixes rdar://8414033 - llvm-mc ignores lines after an invalid instruction mnemonic errors
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113688 91177308-0d34-0410-b5e6-96231b3b80d8
and output the dwarf line number tables. This takes the current loc info after
an instruction is assembled and saves the needed info into an object that has
vector and for each section. These objects will be used for the final patch to
build and emit the encoded dwarf line number tables. Again for now this is only
in the Mach-O streamer but at some point will move to a more generic place.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112668 91177308-0d34-0410-b5e6-96231b3b80d8
needed parsing for the .loc directive and saves the current info from that
into the context. The next patch will take the current loc info after an
instruction is assembled and save that info into a vector for each section for
use to build the line number tables. The patch after that will encode the info
from those vectors into the output file as the dwarf line tables.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@111956 91177308-0d34-0410-b5e6-96231b3b80d8
