This commit caused -Woverloaded-virtual warnings. The two new
TargetTransformInfo::getIntImmCost functions were only added to the superclass,
and to the X86 subclass. The other targets were not updated, and the
warning highlighted this by pointing out that e.g. ARMTTI::getIntImmCost was
hiding the two new getIntImmCost variants.
We could pacify the warning by adding "using TargetTransformInfo::getIntImmCost"
to the various subclasses, or turning it off, but I suspect that it's wrong to
leave the functions unimplemnted in those targets. The default implementations
return TCC_Free, which I don't think is right e.g. for ARM.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200058 91177308-0d34-0410-b5e6-96231b3b80d8
This patch uses a common MipsTargetSteamer interface for both
MipsAsmPrinter and MipsAsmParser for recording default and commandline
driven directives that affect ELF header flags.
It has been noted that the .ll tests affected by this patch belong in
test/Codegen/Mips. I will move them in a separate patch.
Also, a number of directives do not get expressed by AsmPrinter in the
resultant .s assembly such as setting the correct ASI. I have noted this
in the tests and they will be addressed in later patches.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200051 91177308-0d34-0410-b5e6-96231b3b80d8
The i8 type is not registered with any register class.
This causes a segmentation fault in MachineLICM::getRegisterClassIDAndCost.
The code selects the first type associated with register class FPR8,
which happens to be i8.
It uses this type (i8) to get the representative class pointer, which is 0.
It then uses this pointer to access a field, resulting in segmentation fault.
Since i8 type is not being used for printing any neon instruction
we can safely remove it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200046 91177308-0d34-0410-b5e6-96231b3b80d8
Retry commit r200022 with a fix for the build bot errors. Constant expressions
have (unlike instructions) module scope use lists and therefore may have users
in different functions. The fix is to simply ignore these out-of-function uses.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200034 91177308-0d34-0410-b5e6-96231b3b80d8
This pass identifies expensive constants to hoist and coalesces them to
better prepare it for SelectionDAG-based code generation. This works around the
limitations of the basic-block-at-a-time approach.
First it scans all instructions for integer constants and calculates its
cost. If the constant can be folded into the instruction (the cost is
TCC_Free) or the cost is just a simple operation (TCC_BASIC), then we don't
consider it expensive and leave it alone. This is the default behavior and
the default implementation of getIntImmCost will always return TCC_Free.
If the cost is more than TCC_BASIC, then the integer constant can't be folded
into the instruction and it might be beneficial to hoist the constant.
Similar constants are coalesced to reduce register pressure and
materialization code.
When a constant is hoisted, it is also hidden behind a bitcast to force it to
be live-out of the basic block. Otherwise the constant would be just
duplicated and each basic block would have its own copy in the SelectionDAG.
The SelectionDAG recognizes such constants as opaque and doesn't perform
certain transformations on them, which would create a new expensive constant.
This optimization is only applied to integer constants in instructions and
simple (this means not nested) constant cast experessions. For example:
%0 = load i64* inttoptr (i64 big_constant to i64*)
Reviewed by Eric
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200022 91177308-0d34-0410-b5e6-96231b3b80d8
Sweep the codebase for common typos. Includes some changes to visible function
names that were misspelt.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200018 91177308-0d34-0410-b5e6-96231b3b80d8
There is no inline asm in a .s file. Therefore, there should be no logic to
handle it in the streamer. Inline asm only exists in bitcode files, so the
logic can live in the (long misnamed) AsmPrinter class.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200011 91177308-0d34-0410-b5e6-96231b3b80d8
This commit teaches the X86 backend to create the same X86 instructions when it
lowers an sadd/ssub with overflow intrinsic and a conditional branch that uses
that overflow result. This allows SelectionDAG to recognize and remove one of
the redundant operations.
This fixes <rdar://problem/15874016> and <rdar://problem/15661073>.
Reviewed by Nadav
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199976 91177308-0d34-0410-b5e6-96231b3b80d8
registers in memory addresses that do not match the index register. As it does
for .att_syntax.
rdar://15887380
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199948 91177308-0d34-0410-b5e6-96231b3b80d8
scale factors in memory addresses. As it does for .att_syntax.
It was producing:
Assertion failed: (((Scale == 1 || Scale == 2 || Scale == 4 || Scale == 8)) && "Invalid scale!"), function CreateMem, file /Volumes/SandBox/llvm/lib/Target/X86/AsmParser/X86AsmParser.cpp, line 1133.
rdar://14967214
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199942 91177308-0d34-0410-b5e6-96231b3b80d8
Originally, BLX was passed as operand #0 in MachineInstr and as operand
#2 in MCInst. But now, it's operand #2 in both cases.
This patch also removes unnecessary FileCheck in the test case added by r199127.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199928 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds the target analysis passes (usually TargetTransformInfo) to the
codgen pipeline. We also expose now the AddAnalysisPasses method through the C
API, because the optimizer passes would also benefit from better target-specific
cost models.
Reviewed by Andrew Kaylor
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199926 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes a crash in the OpenCV OpenCL test suite.
There is no lit test for this, because the test would be very large
and could easily be invalidated by changes to the scheduler
or other parts of the compiler.
Patch by: Vincent Lejeune
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199919 91177308-0d34-0410-b5e6-96231b3b80d8
This pattern uses an SDNodeXForm, which isn't being emitted for some
reason. I can get it to work by attaching the PatLeaf that has the
XForm to the argument in the output pattern, but this results in an
immediate being used in a register operand, which the backend can't
handle yet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199918 91177308-0d34-0410-b5e6-96231b3b80d8
The control flow finalizer would sometimes use an ALU_POP_AFTER
instruction before the vetex fetch clause instead of using a POP
instruction after it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199917 91177308-0d34-0410-b5e6-96231b3b80d8
Implement the getUnrollingPreferences() function for
AMDGPUTargetTransformInfo so that loops that do address calculations
on pointers derived from alloca are unconditionally unrolled.
Unrolling these loops makes it more likely that SROA will be able to
eliminate the allocas, which is a big win for R600 since memory
allocated by alloca (private memory) is really slow.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199916 91177308-0d34-0410-b5e6-96231b3b80d8
The unit test is now disabled on non-asserts builds.
The CF stack can be corrupted if you use CF_ALU_PUSH_BEFORE,
CF_ALU_ELSE_AFTER, CF_ALU_BREAK, or CF_ALU_CONTINUE when the number of
sub-entries on the stack is greater than or equal to the stack entry
size and sub-entries modulo 4 is either 0 or 3 (on cedar the bug is
present when number of sub-entries module 8 is either 7 or 0)
We choose to be conservative and always apply the work-around when the
number of sub-enries is greater than or equal to the stack entry size,
so that we can safely over-allocate the stack when we are unsure of the
stack allocation rules.
reviewed-by: Vincent Lejeune <vljn at ovi.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199905 91177308-0d34-0410-b5e6-96231b3b80d8
With constant-sharing, litpool loads consume 4 + N*2 bytes of code, but
movw/movt pairs consume 8*N. This means litpools are better than movw/movt even
with just one use. Other materialisation strategies can still be better though,
so the logic is a little odd.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199891 91177308-0d34-0410-b5e6-96231b3b80d8
e.g. linkonce, to TargetMachine and set it when we've done so
for ELF targets currently. This involved making TargetMachine
non-const in a TLOF use and propagating that change around - I'm
open to other ideas.
This will be used in a future commit to handle emitting debug
information with ranges.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199871 91177308-0d34-0410-b5e6-96231b3b80d8
This patch updates .set mips16 support which
affects the ELF ABI and its flags. In addition the patch uses
a common interface for both the MipsTargetSteamer and
MipsObjectStreamer that the assembler uses for
both ELF and ASCII output for these directives.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199851 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit 35b8331cad6eb512a2506adbc394201181da94ba.
The -debug-only flag for llc doesn't appear to be available in
all build configurations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199845 91177308-0d34-0410-b5e6-96231b3b80d8
The CF stack can be corrupted if you use CF_ALU_PUSH_BEFORE,
CF_ALU_ELSE_AFTER, CF_ALU_BREAK, or CF_ALU_CONTINUE when the number of
sub-entries on the stack is greater than or equal to the stack entry
size and sub-entries modulo 4 is either 0 or 3 (on cedar the bug is
present when number of sub-entries module 8 is either 7 or 0)
We choose to be conservative and always apply the work-around when the
number of sub-enries is greater than or equal to the stack entry size,
so that we can safely over-allocate the stack when we are unsure of the
stack allocation rules.
reviewed-by: Vincent Lejeune <vljn at ovi.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199842 91177308-0d34-0410-b5e6-96231b3b80d8
My understanding (from reading just the llvm code) is that
* most ppc cpus have a "sync n" instruction and an msync alias that is "sync 0".
* "book e" cpus instead have a msync instruction and not the more
general "sync n"
This patch reflects that in the .td files, allowing a single codepath for
asm ond obj streamer and incidentelly fixes a crash when EmitRawText was
called on a obj streamer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199832 91177308-0d34-0410-b5e6-96231b3b80d8
