Doesn't seem necessary anymore. I think this was mostly compensating for
not enabling WQM for texture sampling instructions.
v2: Add test coverage
Reviewed-by: Tom Stellard <tom@stellard.net>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228373 91177308-0d34-0410-b5e6-96231b3b80d8
If whole quad mode isn't enabled for these, the level of detail is
calculated incorrectly for pixels along diagonal triangle edges, causing
artifacts.
v2: Use a TSFlag instead of lots of switch cases
v3: Add test coverage
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88642
Reviewed-by: Tom Stellard <tom@stellard.net>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228372 91177308-0d34-0410-b5e6-96231b3b80d8
Since testing the function indirectly is tricky, introduce a direct
print-memderefs pass, in the same spirit as print-memdeps, which prints
dereferenceability information matched by FileCheck.
Differential Revision: http://reviews.llvm.org/D7075
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228369 91177308-0d34-0410-b5e6-96231b3b80d8
Avoid the creation of select instructions which can result in different
scheduling of the selects.
I also added a bunch of additional store volatiles. Those avoid A
CodeGen problem (bug?) where normalizes and denomarlizing the control
moves all shift instructions into the first block where ISel can't match
them together with the cmps.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228362 91177308-0d34-0410-b5e6-96231b3b80d8
Use FileCheck, make it more consistent and do not rely on unoptimized
or(cmp,cmp) getting combined for max to be matched.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228361 91177308-0d34-0410-b5e6-96231b3b80d8
Specifically:
- Calculate the loop pre-header once at the stat of HoistOutOfLoop, so:
- We don't-DFS walk the MachineDomTree if we aren't going to do anything
- Don't call getCurPreheader for each Scope
- Don't needlessly use a do-while loop
- Use early exit for Scopes.size() == 0
No functional changes intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228350 91177308-0d34-0410-b5e6-96231b3b80d8
Fixes PR22462: two of the tests have regressed for a while,
but were using CHECK-NOT to match "May:". The actual output
was changed to "MayAlias:" at some point, which made the tests
useless.
Two others return MayAlias only because of a lack of analysis;
BasicAA returns PartialAlias in those cases, when a datalayout
is present.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228346 91177308-0d34-0410-b5e6-96231b3b80d8
By default, store all local variables in dynamic alloca instead of
static one. It reduces the stack space usage in use-after-return mode
(dynamic alloca will not be called if the local variables are stored
in a fake stack), and improves the debug info quality for local
variables (they will not be described relatively to %rbp/%rsp, which
are assumed to be clobbered by function calls).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228336 91177308-0d34-0410-b5e6-96231b3b80d8
PassManager instance. In one case we can make the determination
from the Triple, in the other (execution dependency pass) the
pass will avoid running if we don't have any code that uses that
register class so go ahead and add it to the pipeline.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228334 91177308-0d34-0410-b5e6-96231b3b80d8
dealing with module level emission. Currently this is using
the Triple to determine, but eventually the logic should
probably migrate to TLOF.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228332 91177308-0d34-0410-b5e6-96231b3b80d8
PowerPC supports pre-increment load/store instructions (except for Altivec/VSX
vector load/stores). Using these on embedded cores can be very important, but
most loops are not naturally set up to use them. We can often change that,
however, by placing loops into a non-canonical form. Generically, this means
transforming loops like this:
for (int i = 0; i < n; ++i)
array[i] = c;
to look like this:
T *p = array[-1];
for (int i = 0; i < n; ++i)
*++p = c;
the key point is that addresses accessed are pulled into dedicated PHIs and
"pre-decremented" in the loop preheader. This allows the use of pre-increment
load/store instructions without loop peeling.
A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is
introduced to perform this transformation. I've used this code out-of-tree for
generating code for the PPC A2 for over a year. Somewhat to my surprise,
running the test suite + externals on a P7 with this transformation enabled
showed no performance regressions, and one speedup:
External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk
-2.32514% +/- 1.03736%
So I'm going to enable it on everything for now. I was surprised by this
because, on the POWER cores, these pre-increment load/store instructions are
cracked (and, thus, harder to schedule effectively). But seeing no regressions,
and feeling that it is generally easier to split instructions apart late than
it is to combine them late, this might be the better approach regardless.
In the future, we might want to integrate this functionality into LSR (but
currently LSR does not create new PHI nodes, so (for that and other reasons)
significant work would need to be done).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228328 91177308-0d34-0410-b5e6-96231b3b80d8
PowerPC supports pre-increment floating-point load/store instructions, both r+r
and r+i, and we had patterns for them, but they were not marked as legal. Mark
them as legal (and add a test case).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228327 91177308-0d34-0410-b5e6-96231b3b80d8
The combine that forms extloads used to be disabled on vector types,
because "None of the supported targets knows how to perform load and
sign extend on vectors in one instruction."
That's not entirely true, since at least SSE4.1 X86 knows how to do
those sextloads/zextloads (with PMOVS/ZX).
But there are several aspects to getting this right.
First, vector extloads are controlled by a profitability callback.
For instance, on ARM, several instructions have folded extload forms,
so it's not always beneficial to create an extload node (and trying to
match extloads is a whole 'nother can of worms).
The interesting optimization enables folding of s/zextloads to illegal
(splittable) vector types, expanding them into smaller legal extloads.
It's not ideal (it introduces some legalization-like behavior in the
combine) but it's better than the obvious alternative: form illegal
extloads, and later try to split them up. If you do that, you might
generate extloads that can't be split up, but have a valid ext+load
expansion. At vector-op legalization time, it's too late to generate
this kind of code, so you end up forced to scalarize. It's better to
just avoid creating egregiously illegal nodes.
This optimization is enabled unconditionally on X86.
Note that the splitting combine is happy with "custom" extloads. As
is, this bypasses the actual custom lowering, and just unrolls the
extload. But from what I've seen, this is still much better than the
current custom lowering, which does some kind of unrolling at the end
anyway (see for instance load_sext_4i8_to_4i64 on SSE2, and the added
FIXME).
Also note that the existing combine that forms extloads is now also
enabled on legal vectors. This doesn't have a big effect on X86
(because sext+load is usually combined to sext_inreg+aextload).
On ARM it fires on some rare occasions; that's for a separate commit.
Differential Revision: http://reviews.llvm.org/D6904
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228325 91177308-0d34-0410-b5e6-96231b3b80d8
The return value's address must be returned in %rax.
i.e. the callee needs to copy the sret argument (%rdi)
into the return value (%rax).
This probably won't manifest as a bug when the caller is LLVM-compiled
code. But it is an ABI guarantee and tools expect it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228321 91177308-0d34-0410-b5e6-96231b3b80d8
We should be setting UnrollingPreferences::MaxCount to MAX_UINT instead
of UnrollingPreferences::Count.
Count is a 'forced unrolling factor', while MaxCount sets an upper
limit to the unrolling factor.
Setting Count to MAX_UINT was causing the loop in the testcase to be
unrolled 15 times, when it only had a maximum of 4 iterations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228303 91177308-0d34-0410-b5e6-96231b3b80d8
The llvm.SI.end.cf intrinsic is used to mark the end of if-then blocks,
if-then-else blocks, and loops. It is responsible for updating the
exec mask to re-enable threads that had been masked during the preceding
control flow block. For example:
s_mov_b64 exec, 0x3 ; Initial exec mask
s_mov_b64 s[0:1], exec ; Saved exec mask
v_cmpx_gt_u32 exec, s[2:3], v0, 0 ; llvm.SI.if
do_stuff()
s_or_b64 exec, exec, s[0:1] ; llvm.SI.end.cf
The bug fixed by this patch was one where the llvm.SI.end.cf intrinsic
was being inserted into the header of loops. This would happen when
an if block terminated in a loop header and we would end up with
code like this:
s_mov_b64 exec, 0x3 ; Initial exec mask
s_mov_b64 s[0:1], exec ; Saved exec mask
v_cmpx_gt_u32 exec, s[2:3], v0, 0 ; llvm.SI.if
do_stuff()
LOOP: ; Start of loop header
s_or_b64 exec, exec, s[0:1] ; llvm.SI.end.cf <-BUG: The exec mask has the
same value at the beginning of each loop
iteration.
do_stuff();
s_cbranch_execnz LOOP
The fix is to create a new basic block before the loop and insert the
llvm.SI.end.cf there. This way the exec mask is restored before the
start of the loop instead of at the beginning of each iteration.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228302 91177308-0d34-0410-b5e6-96231b3b80d8
Patch by Kit Barton.
Add the vector count leading zeros instruction for byte, halfword,
word, and doubleword sizes. This is a fairly straightforward addition
after the changes made for vpopcnt:
1. Add the correct definitions for the various instructions in
PPCInstrAltivec.td
2. Make the CTLZ operation legal on vector types when using P8Altivec
in PPCISelLowering.cpp
Test Plan
Created new test case in test/CodeGen/PowerPC/vec_clz.ll to check the
instructions are being generated when the CTLZ operation is used in
LLVM.
Check the encoding and decoding in test/MC/PowerPC/ppc_encoding_vmx.s
and test/Disassembler/PowerPC/ppc_encoding_vmx.txt respectively.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228301 91177308-0d34-0410-b5e6-96231b3b80d8
Implement a BITCAST dag combine to transform i32->mmx conversion patterns
into a X86 specific node (MMX_MOVW2D) and guarantee that moves between
i32 and x86mmx are better handled, i.e., don't use store-load to do the
conversion..
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228293 91177308-0d34-0410-b5e6-96231b3b80d8
Avoid regression in previously supported MMX code by adding different
combinations of tests which exercise MMX bitcasts. Small improvements
to these patterns should come next.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228292 91177308-0d34-0410-b5e6-96231b3b80d8
