This fixes a regression introduced at revision 231243.
The target-independent selection algorithm in FastISel knows how to select
a SINT_TO_FP if the target is SSE but not AVX. That is because on X86, the
tablegen'd 'fastEmit' functions know how to select CVTSI2SSrr and CVTSI2SDrr.
Method X86FastISel::X86SelectSIToFP was therefore working under the
wrong assumption that the target was AVX. That assumption was incorrect since
we can have a target that is neither AVX nor SSE.
So, rather than asserting for the presence of AVX, we should have had an
early exit from 'X86SelectSIToFP' if the target was not AVX.
This patch fixes the issue replacing the invalid assertion with an early exit.
Thanks to Dimitry Andric for reporting this problem and for providing a small
reproducible testcase. Added test pr23273.ll.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235295 91177308-0d34-0410-b5e6-96231b3b80d8
As a follow-up to r234021, assert that a debug info intrinsic variable's
`MDLocalVariable::getInlinedAt()` always matches the
`MDLocation::getInlinedAt()` of its `!dbg` attachment.
The goal here is to get rid of `MDLocalVariable::getInlinedAt()`
entirely (PR22778), but I'll let these assertions bake for a while
first.
If you have an out-of-tree backend that just broke, you're probably
attaching the wrong `DebugLoc` to a `DBG_VALUE` instruction. The one
you want is the location that was attached to the corresponding
`@llvm.dbg.declare` or `@llvm.dbg.value` call that you started with.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234038 91177308-0d34-0410-b5e6-96231b3b80d8
This patch reduces code size for all AVX targets and increases speed for some chips.
SSE 4.1 introduced the useless (see code comments) 2-register form of BLENDV and
only in the packed float/double flavors.
AVX subsequently made the instruction useful by adding a 4-register operand form.
So we just need to paper over the lack of scalar forms of this instruction, complicate
the code to choose float or double forms, and use blendv on scalars since all FP is in
xmm registers anyway.
This gives us an approximately 50% speed up for a blendv microbenchmark sequence
on SandyBridge and Haswell:
blendv : 29.73 cycles/iter
logic : 43.15 cycles/iter
No new test cases with this patch because:
1. fast-isel-select-sse.ll tests the positive side for regular X86 lowering and fast-isel
2. sse-minmax.ll and fp-select-cmp-and.ll confirm that we're not firing for scalar selects without AVX
3. fp-select-cmp-and.ll and logical-load-fold.ll confirm that we're not firing for scalar selects with constants.
http://llvm.org/bugs/show_bug.cgi?id=22483
Differential Revision: http://reviews.llvm.org/D8063
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231408 91177308-0d34-0410-b5e6-96231b3b80d8
The target-independent selection algorithm in FastISel already knows how
to select a SINT_TO_FP if the target is SSE but not AVX.
On targets that have SSE but not AVX, the tablegen'd 'fastEmit' functions
for ISD::SINT_TO_FP know how to select instruction X86::CVTSI2SSrr
(for an i32 to f32 conversion) and X86::CVTSI2SDrr (for an i32 to f64
conversion).
This patch simplifies the logic in method X86SelectSIToFP knowing that
the code would not be reachable if the subtarget doesn't have AVX.
No functional change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231243 91177308-0d34-0410-b5e6-96231b3b80d8
Everyone except R600 was manually passing the length of a static array
at each callsite, calculated in a variety of interesting ways. Far
easier to let ArrayRef handle that.
There should be no functional change, but out of tree targets may have
to tweak their calls as with these examples.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230118 91177308-0d34-0410-b5e6-96231b3b80d8
This patch teaches X86FastISel how to select intrinsic 'convert_from_fp16' and
intrinsic 'convert_to_fp16'.
If the target has F16C, we can select VCVTPS2PHrr for a float-half conversion,
and VCVTPH2PSrr for a half-float conversion.
Differential Revision: http://reviews.llvm.org/D7673
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230043 91177308-0d34-0410-b5e6-96231b3b80d8
This patch teaches fast-isel how to select a (V)CVTSI2SSrr for an integer to
float conversion, and how to select a (V)CVTSI2SDrr for an integer to double
conversion.
Added test 'fast-isel-int-float-conversion.ll'.
Differential Revision: http://reviews.llvm.org/D7698
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229589 91177308-0d34-0410-b5e6-96231b3b80d8
This patch teaches X86FastISel how to select AVX instructions for scalar
float/double convert operations.
Before this patch, X86FastISel always selected legacy SSE instructions
for FPExt (from float to double) and FPTrunc (from double to float).
For example:
\code
define double @foo(float %f) {
%conv = fpext float %f to double
ret double %conv
}
\end code
Before (with -mattr=+avx -fast-isel) X86FastIsel selected a CVTSS2SDrr which is
legacy SSE:
cvtss2sd %xmm0, %xmm0
With this patch, X86FastIsel selects a VCVTSS2SDrr instead:
vcvtss2sd %xmm0, %xmm0, %xmm0
Added test fast-isel-fptrunc-fpext.ll to check both the register-register and
the register-memory float/double conversion variants.
Differential Revision: http://reviews.llvm.org/D7438
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228682 91177308-0d34-0410-b5e6-96231b3b80d8
This moves the transformation introduced in r223757 into a separate MI pass.
This allows it to cover many more cases (not only cases where there must be a
reserved call frame), and perform rudimentary call folding. It still doesn't
have a heuristic, so it is enabled only for optsize/minsize, with stack
alignment <= 8, where it ought to be a fairly clear win.
(Re-commit of r227728)
Differential Revision: http://reviews.llvm.org/D6789
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227752 91177308-0d34-0410-b5e6-96231b3b80d8
This moves the transformation introduced in r223757 into a separate MI pass.
This allows it to cover many more cases (not only cases where there must be a
reserved call frame), and perform rudimentary call folding. It still doesn't
have a heuristic, so it is enabled only for optsize/minsize, with stack
alignment <= 8, where it ought to be a fairly clear win.
Differential Revision: http://reviews.llvm.org/D6789
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227728 91177308-0d34-0410-b5e6-96231b3b80d8
The use of the DbgLoc in FastISel is probably something we should fix.
It's prone to leaking the wrong location into instructions - we should
have a clear chain of custody from the debug location of an IR
Instruction to that of a MachineInstr to avoid such leakage.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227481 91177308-0d34-0410-b5e6-96231b3b80d8
derived classes.
Since global data alignment, layout, and mangling is often based on the
DataLayout, move it to the TargetMachine. This ensures that global
data is going to be layed out and mangled consistently if the subtarget
changes on a per function basis. Prior to this all targets(*) have
had subtarget dependent code moved out and onto the TargetMachine.
*One target hasn't been migrated as part of this change: R600. The
R600 port has, as a subtarget feature, the size of pointers and
this affects global data layout. I've currently hacked in a FIXME
to enable progress, but the port needs to be updated to either pass
the 64-bitness to the TargetMachine, or fix the DataLayout to
avoid subtarget dependent features.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227113 91177308-0d34-0410-b5e6-96231b3b80d8
Overall this seems simpler. It reduces duplication of patterns between both modes and it simplifies the memory folding/unfolding tables as they don't need to create fake instructions just to keep track of 64-bitness.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225252 91177308-0d34-0410-b5e6-96231b3b80d8
The assembler backend will relax to the long form if necessary. This removes a swap from long form to short form in the MCInstLowering code. Selecting the long form used to be required by the old JIT.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225242 91177308-0d34-0410-b5e6-96231b3b80d8
The else case ResultReg was not checked for validity.
To my surprise, this case was not hit in any of the
existing test cases. This includes a new test cases
that tests this path.
Also drop the `target triple` declaration from the
original test as suggested by H.J. Lu, because
apparently with it the test won't be run on Linux
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224901 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Consider the following IR:
%3 = load i8* undef
%4 = trunc i8 %3 to i1
%5 = call %jl_value_t.0* @foo(..., i1 %4, ...)
ret %jl_value_t.0* %5
Bools (that are the result of direct truncs) are lowered as whatever
the argument to the trunc was and a "and 1", causing the part of the
MBB responsible for this argument to look something like this:
%vreg8<def,tied1> = AND8ri %vreg7<kill,tied0>, 1, %EFLAGS<imp-def>; GR8:%vreg8,%vreg7
Later, when the load is lowered, it will insert
%vreg15<def> = MOV8rm %vreg14, 1, %noreg, 0, %noreg; mem:LD1[undef] GR8:%vreg15 GR64:%vreg14
but remember to (at the end of isel) replace vreg7 by vreg15. Now for
the bug. In fast isel lowering, we mistakenly mark vreg8 as the result
of the load instead of the trunc. This adds a fixup to have
vreg8 replaced by whatever the result of the load is as well, so
we end up with
%vreg15<def,tied1> = AND8ri %vreg15<kill,tied0>, 1, %EFLAGS<imp-def>; GR8:%vreg15
which is an SSA violation and causes problems later down the road.
This fixes PR21557.
Test Plan: Test test case from PR21557 is added to the test suite.
Reviewers: ributzka
Reviewed By: ributzka
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6245
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224884 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Follow up to [x32] "Use ebp/esp as frame and stack pointer":
http://reviews.llvm.org/D4617
In that earlier patch, NaCl64 was made to always use rbp.
That's needed for most cases because rbp should hold a full
64-bit address within the NaCl sandbox so that load/stores
off of rbp don't require sandbox adjustment (zeroing the top
32-bits, then filling those by adding r15).
However, llvm.frameaddress returns a pointer and pointers
are 32-bit for NaCl64. In this case, use ebp instead, which
will make the register copy type check. A similar mechanism
may be needed for llvm.eh.return, but is not added in this change.
Test Plan: test/CodeGen/X86/frameaddr.ll
Reviewers: dschuff, nadav
Subscribers: jfb, llvm-commits
Differential Revision: http://reviews.llvm.org/D6514
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223510 91177308-0d34-0410-b5e6-96231b3b80d8
This patch improves support for commutative instructions in the x86 memory folding implementation by attempting to fold a commuted version of the instruction if the original folding fails - if that folding fails as well the instruction is 're-commuted' back to its original order before returning.
Updated version of r219584 (reverted in r219595) - the commutation attempt now explicitly ensures that neither of the commuted source operands are tied to the destination operand / register, which was the source of all the regressions that occurred with the original patch attempt.
Added additional regression test case provided by Joerg Sonnenberger.
Differential Revision: http://reviews.llvm.org/D5818
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220239 91177308-0d34-0410-b5e6-96231b3b80d8
This patch improves support for commutative instructions in the x86 memory folding implementation by attempting to fold a commuted version of the instruction if the original folding fails - if that folding fails as well the instruction is 're-commuted' back to its original order before returning.
This mainly helps the stack inliner better fold reloads of 3 (or more) operand instructions (VEX encoded SSE etc.) but by performing this in the lowest foldMemoryOperandImpl implementation it also replaces the X86InstrInfo::optimizeLoadInstr version and is now used by FastISel too.
Differential Revision: http://reviews.llvm.org/D5701
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219584 91177308-0d34-0410-b5e6-96231b3b80d8
argument of the llvm.dbg.declare/llvm.dbg.value intrinsics.
Previously, DIVariable was a variable-length field that has an optional
reference to a Metadata array consisting of a variable number of
complex address expressions. In the case of OpPiece expressions this is
wasting a lot of storage in IR, because when an aggregate type is, e.g.,
SROA'd into all of its n individual members, the IR will contain n copies
of the DIVariable, all alike, only differing in the complex address
reference at the end.
By making the complex address into an extra argument of the
dbg.value/dbg.declare intrinsics, all of the pieces can reference the
same variable and the complex address expressions can be uniqued across
the CU, too.
Down the road, this will allow us to move other flags, such as
"indirection" out of the DIVariable, too.
The new intrinsics look like this:
declare void @llvm.dbg.declare(metadata %storage, metadata %var, metadata %expr)
declare void @llvm.dbg.value(metadata %storage, i64 %offset, metadata %var, metadata %expr)
This patch adds a new LLVM-local tag to DIExpressions, so we can detect
and pretty-print DIExpression metadata nodes.
What this patch doesn't do:
This patch does not touch the "Indirect" field in DIVariable; but moving
that into the expression would be a natural next step.
http://reviews.llvm.org/D4919
rdar://problem/17994491
Thanks to dblaikie and dexonsmith for reviewing this patch!
Note: I accidentally committed a bogus older version of this patch previously.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218787 91177308-0d34-0410-b5e6-96231b3b80d8
argument of the llvm.dbg.declare/llvm.dbg.value intrinsics.
Previously, DIVariable was a variable-length field that has an optional
reference to a Metadata array consisting of a variable number of
complex address expressions. In the case of OpPiece expressions this is
wasting a lot of storage in IR, because when an aggregate type is, e.g.,
SROA'd into all of its n individual members, the IR will contain n copies
of the DIVariable, all alike, only differing in the complex address
reference at the end.
By making the complex address into an extra argument of the
dbg.value/dbg.declare intrinsics, all of the pieces can reference the
same variable and the complex address expressions can be uniqued across
the CU, too.
Down the road, this will allow us to move other flags, such as
"indirection" out of the DIVariable, too.
The new intrinsics look like this:
declare void @llvm.dbg.declare(metadata %storage, metadata %var, metadata %expr)
declare void @llvm.dbg.value(metadata %storage, i64 %offset, metadata %var, metadata %expr)
This patch adds a new LLVM-local tag to DIExpressions, so we can detect
and pretty-print DIExpression metadata nodes.
What this patch doesn't do:
This patch does not touch the "Indirect" field in DIVariable; but moving
that into the expression would be a natural next step.
http://reviews.llvm.org/D4919
rdar://problem/17994491
Thanks to dblaikie and dexonsmith for reviewing this patch!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218778 91177308-0d34-0410-b5e6-96231b3b80d8
This is the final round of renaming. This changes tblgen to emit lower-case
function names for FastEmitInst_* and FastEmit_*, and updates all its uses
in the source code.
Reviewed by Eric
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217075 91177308-0d34-0410-b5e6-96231b3b80d8
Note: This was originally reverted to track down a buildbot error. Reapply
without any modifications.
Original commit message:
In the large code model for X86 floating-point constants are placed in the
constant pool and materialized by loading from it. Since the constant pool
could be far away, a PC relative load might not work. Therefore we first
materialize the address of the constant pool with a movabsq and then load
from there the floating-point value.
Fixes <rdar://problem/17674628>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216012 91177308-0d34-0410-b5e6-96231b3b80d8
Note: This was originally reverted to track down a buildbot error. Reapply
without any modifications.
Original commit message:
This mostly affects the i64 value type, which always resulted in an 15byte
mobavsq instruction to materialize any constant. The custom code checks the
value of the immediate and tries to use a different and smaller mov
instruction when possible.
This fixes <rdar://problem/17420988>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216010 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts:
r215595 "[FastISel][X86] Add large code model support for materializing floating-point constants."
r215594 "[FastISel][X86] Use XOR to materialize the "0" value."
r215593 "[FastISel][X86] Emit more efficient instructions for integer constant materialization."
r215591 "[FastISel][AArch64] Make use of the zero register when possible."
r215588 "[FastISel] Let the target decide first if it wants to materialize a constant."
r215582 "[FastISel][AArch64] Cleanup constant materialization code. NFCI."
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215673 91177308-0d34-0410-b5e6-96231b3b80d8
In the large code model for X86 floating-point constants are placed in the
constant pool and materialized by loading from it. Since the constant pool
could be far away, a PC relative load might not work. Therefore we first
materialize the address of the constant pool with a movabsq and then load
from there the floating-point value.
Fixes <rdar://problem/17674628>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215595 91177308-0d34-0410-b5e6-96231b3b80d8
This mostly affects the i64 value type, which always resulted in an 15byte
mobavsq instruction to materialize any constant. The custom code checks the
value of the immediate and tries to use a different and smaller mov
instruction when possible.
This fixes <rdar://problem/17420988>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215593 91177308-0d34-0410-b5e6-96231b3b80d8
Split the constant materialization code into three separate helper functions for
Integer-, Floating-Point-, and GlobalValue-Constants.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215586 91177308-0d34-0410-b5e6-96231b3b80d8
I accidentally also used INC/DEC for unsigned arithmetic which doesn't work,
because INC/DEC don't set the required flag which is used for the overflow
check.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215237 91177308-0d34-0410-b5e6-96231b3b80d8
to get the subtarget and that's accessible from the MachineFunction
now. This helps clear the way for smaller changes where we getting
a subtarget will require passing in a MachineFunction/Function as
well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214988 91177308-0d34-0410-b5e6-96231b3b80d8
