Commit Graph

16907 Commits

Author SHA1 Message Date
Jim Grosbach
596e474101 Fix a memory leak in MachOObjectFile.
MachOObjectFile owns a MachOObj, but never frees it. Both MachOObjectFile
and MachOObj want to own the MemoryBuffer, though, so we have to be careful
and give them each one of their own.

Thanks to Greg Clayton, Eric Christopher and Michael Spencer for helping
figure out what's going wrong here.

rdar://12561773

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168923 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-29 19:14:11 +00:00
Alexey Samsonov
ee548275c6 Add options to AddressSanitizer passes to make them configurable by frontend.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168910 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-29 18:14:24 +00:00
Pedro Artigas
6eda081345 One more step towards making doInitialization and doFinalization useful for
start up and clean up module passes, now that ASAN and TSAN are fixed the
tests pass



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168905 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-29 17:47:05 +00:00
Justin Holewinski
3d200255d5 Allow targets to prefer TypeSplitVector over TypePromoteInteger when computing the legalization method for vectors
For some targets, it is desirable to prefer scalarizing <N x i1> instead of promoting to a larger legal type, such as <N x i32>.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168882 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-29 14:26:24 +00:00
Evgeniy Stepanov
aa4f97d6ed Initial commit of MemorySanitizer.
Compiler pass only.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168866 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-29 09:57:20 +00:00
Jakob Stoklund Olesen
39b5c0c049 Use MCPhysReg for RegisterClassInfo allocation orders.
This saves a bit of memory.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168852 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-29 03:34:17 +00:00
Jakob Stoklund Olesen
e26e8a64ab Add an MCPhysReg typedef to replace naked uint16_t.
Use this type for arrays of physical registers.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168850 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-29 02:39:28 +00:00
Shuxin Yang
9b7f6f2de8 Instruction::isAssociative() returns true for fmul/fadd if they are tagged "unsafe" mode.
Approved by: Eli and Michael.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168848 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-29 01:47:31 +00:00
Michael Ilseman
9992bf75fc Fast-math: Extend IRBuilder to have settable FastMathFlags to create instructions with
Also extended IRBuilder's documentation to mention the convenience state for DefaultFPMathTag and FastMathFlags that can be set.



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168812 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-28 21:16:19 +00:00
Michael Ilseman
0d38424bbe Fast-math comments and convenience method
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168811 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-28 21:11:25 +00:00
Jakob Stoklund Olesen
1ead68d769 Make the LiveRegMatrix analysis available to targets.
No functional change, just moved header files.

Targets can inject custom passes between register allocation and
rewriting. This makes it possible to tweak the register allocation
before rewriting, using the full global interference checking available
from LiveRegMatrix.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168806 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-28 19:13:06 +00:00
Eli Bendersky
6b731486d4 Add backreference matching capabilities to Support/Regex, with
appropriate unit tests. This change in itself is not expected to
affect any functionality at this point, but it will serve as a
stepping stone to improve FileCheck's variable matching capabilities.

Luckily, our regex implementation already supports backreferences,
although a bit of hacking is required to enable it. It supports both
Basic Regular Expressions (BREs) and Extended Regular Expressions
(EREs), without supporting backrefs for EREs, following POSIX strictly
in this respect. And EREs is what we actually use (rightly). This is
contrary to many implementations (including the default on Linux) of
POSIX regexes, that do allow backrefs in EREs.

Adding backref support to our EREs is a very simple change in the
regcomp parsing code. I fail to think of significant cases where it
would clash with existing things, and can bring more versatility to
the regexes we write. There's always the danger of a backref in a
specially crafted regex causing exponential matching times, but since
we mainly use them for testing purposes I don't think it's a big
problem. [it can also be placed behind a flag specific to FileCheck,
if needed].

For more details, see:

* http://lists.cs.uiuc.edu/pipermail/llvmdev/2012-November/055840.html
* http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20121126/156878.html



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168802 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-28 19:00:02 +00:00
Kostya Serebryany
1416edc30a [asan] Split AddressSanitizer into two passes (FunctionPass, ModulePass), LLVM part. This requires a clang part which will follow.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168781 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-28 10:31:36 +00:00
Bill Wendling
3defc0bfa6 Add back support for reading and parsing 'deplibs'.
This is for backwards compatibility for pre-3.x bc files. The code reads the
code, but does nothing with it.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168779 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-28 08:41:48 +00:00
Andrew Trick
8b1496c922 misched: Analysis that partitions the DAG into subtrees.
This is a simple, cheap infrastructure for analyzing the shape of a
DAG. It recognizes uniform DAGs that take the shape of bottom-up
subtrees, such as the included matrix multiplication example. This is
useful for heuristics that balance register pressure with ILP. Two
canonical expressions of the heuristic are implemented in scheduling
modes: -misched-ilpmin and -misched-ilpmax.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168773 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-28 05:13:28 +00:00
Andrew Trick
53e98a2c4a misched: rename ScheduleDAGILP to ScheduleDFS to prepare for other heuristics.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168772 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-28 05:13:24 +00:00
Eric Christopher
6acb53152c Add brief support for the fission .debug_info.dwo section for
ELF output.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168764 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-28 02:49:38 +00:00
Eric Christopher
915e46fd96 Rearrange ordering of sections.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168762 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-28 02:49:32 +00:00
Eric Christopher
43e1d7aded Move and comment accessor routines.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168761 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-28 02:49:28 +00:00
Jakob Stoklund Olesen
a9fa4fd973 Remove all references to TargetInstrInfoImpl.
This class has been merged into its super-class TargetInstrInfo.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168760 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-28 02:35:17 +00:00
Jakob Stoklund Olesen
fa2d98632c Move the guts of TargetInstrInfoImpl into the TargetInstrInfo class.
The *Impl class no longer serves a purpose now that the super-class
implementation is in CodeGen.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168759 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-28 02:35:13 +00:00
Andrew Kaylor
8213068f34 Fix comment formatting in RuntimeDyld.h
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168739 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-27 22:53:57 +00:00
Andrew Kaylor
927ba6a0b3 Moving SectionMemoryManager into RuntimeDyld and adding unit tests for it.
The SectionMemoryManager now supports (and requires) applying section-specific page permissions.  Clients using this memory manager must call either MCJIT::finalizeObject() or SectionMemoryManager::applyPermissions() before executing JITed code.

See r168718 for changes from the previous implementation.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168721 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-27 19:42:02 +00:00
Pedro Artigas
4bfea7685d Test commit only modifying comments
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168709 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-27 17:39:20 +00:00
Bill Schmidt
34a9d4b3b9 This patch implements medium code model support for 64-bit PowerPC.
The default for 64-bit PowerPC is small code model, in which TOC entries
must be addressable using a 16-bit offset from the TOC pointer.  Additionally,
only TOC entries are addressed via the TOC pointer.

With medium code model, TOC entries and data sections can all be addressed
via the TOC pointer using a 32-bit offset.  Cooperation with the linker
allows 16-bit offsets to be used when these are sufficient, reducing the
number of extra instructions that need to be executed.  Medium code model
also does not generate explicit TOC entries in ".section toc" for variables
that are wholly internal to the compilation unit.

Consider a load of an external 4-byte integer.  With small code model, the
compiler generates:

	ld 3, .LC1@toc(2)
	lwz 4, 0(3)

	.section	.toc,"aw",@progbits
.LC1:
	.tc ei[TC],ei

With medium model, it instead generates:

	addis 3, 2, .LC1@toc@ha
	ld 3, .LC1@toc@l(3)
	lwz 4, 0(3)

	.section	.toc,"aw",@progbits
.LC1:
	.tc ei[TC],ei

Here .LC1@toc@ha is a relocation requesting the upper 16 bits of the
32-bit offset of ei's TOC entry from the TOC base pointer.  Similarly,
.LC1@toc@l is a relocation requesting the lower 16 bits.  Note that if
the linker determines that ei's TOC entry is within a 16-bit offset of
the TOC base pointer, it will replace the "addis" with a "nop", and
replace the "ld" with the identical "ld" instruction from the small
code model example.

Consider next a load of a function-scope static integer.  For small code
model, the compiler generates:

	ld 3, .LC1@toc(2)
	lwz 4, 0(3)

	.section	.toc,"aw",@progbits
.LC1:
	.tc test_fn_static.si[TC],test_fn_static.si
	.type	test_fn_static.si,@object
	.local	test_fn_static.si
	.comm	test_fn_static.si,4,4

For medium code model, the compiler generates:

	addis 3, 2, test_fn_static.si@toc@ha
	addi 3, 3, test_fn_static.si@toc@l
	lwz 4, 0(3)

	.type	test_fn_static.si,@object
	.local	test_fn_static.si
	.comm	test_fn_static.si,4,4

Again, the linker may replace the "addis" with a "nop", calculating only
a 16-bit offset when this is sufficient.

Note that it would be more efficient for the compiler to generate:

	addis 3, 2, test_fn_static.si@toc@ha
        lwz 4, test_fn_static.si@toc@l(3)

The current patch does not perform this optimization yet.  This will be
addressed as a peephole optimization in a later patch.

For the moment, the default code model for 64-bit PowerPC will remain the
small code model.  We plan to eventually change the default to medium code
model, which matches current upstream GCC behavior.  Note that the different
code models are ABI-compatible, so code compiled with different models will
be linked and execute correctly.

I've tested the regression suite and the application/benchmark test suite in
two ways:  Once with the patch as submitted here, and once with additional
logic to force medium code model as the default.  The tests all compile
cleanly, with one exception.  The mandel-2 application test fails due to an
unrelated ABI compatibility with passing complex numbers.  It just so happens
that small code model was incredibly lucky, in that temporary values in 
floating-point registers held the expected values needed by the external
library routine that was called incorrectly.  My current thought is to correct
the ABI problems with _Complex before making medium code model the default,
to avoid introducing this "regression."

Here are a few comments on how the patch works, since the selection code
can be difficult to follow:

The existing logic for small code model defines three pseudo-instructions:
LDtoc for most uses, LDtocJTI for jump table addresses, and LDtocCPT for
constant pool addresses.  These are expanded by SelectCodeCommon().  The
pseudo-instruction approach doesn't work for medium code model, because
we need to generate two instructions when we match the same pattern.
Instead, new logic in PPCDAGToDAGISel::Select() intercepts the TOC_ENTRY
node for medium code model, and generates an ADDIStocHA followed by either
a LDtocL or an ADDItocL.  These new node types correspond naturally to
the sequences described above.

The addis/ld sequence is generated for the following cases:
 * Jump table addresses
 * Function addresses
 * External global variables
 * Tentative definitions of global variables (common linkage)

The addis/addi sequence is generated for the following cases:
 * Constant pool entries
 * File-scope static global variables
 * Function-scope static variables

Expanding to the two-instruction sequences at select time exposes the
instructions to subsequent optimization, particularly scheduling.

The rest of the processing occurs at assembly time, in
PPCAsmPrinter::EmitInstruction.  Each of the instructions is converted to
a "real" PowerPC instruction.  When a TOC entry needs to be created, this
is done here in the same manner as for the existing LDtoc, LDtocJTI, and
LDtocCPT pseudo-instructions (I factored out a new routine to handle this).

I had originally thought that if a TOC entry was needed for LDtocL or
ADDItocL, it would already have been generated for the previous ADDIStocHA.
However, at higher optimization levels, the ADDIStocHA may appear in a 
different block, which may be assembled textually following the block
containing the LDtocL or ADDItocL.  So it is necessary to include the
possibility of creating a new TOC entry for those two instructions.

Note that for LDtocL, we generate a new form of LD called LDrs.  This
allows specifying the @toc@l relocation for the offset field of the LD
instruction (i.e., the offset is replaced by a SymbolLo relocation).
When the peephole optimization described above is added, we will need
to do similar things for all immediate-form load and store operations.

The seven "mcm-n.ll" test cases are kept separate because otherwise the
intermingling of various TOC entries and so forth makes the tests fragile
and hard to understand.

The above assumes use of an external assembler.  For use of the
integrated assembler, new relocations are added and used by
PPCELFObjectWriter.  Testing is done with "mcm-obj.ll", which tests for
proper generation of the various relocations for the same sequences
tested with the external assembler.






git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168708 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-27 17:35:46 +00:00
Bill Wendling
efd08d413c Remove the dependent libraries feature.
The dependent libraries feature was never used and has bit-rotted. Remove it.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168694 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-27 09:55:56 +00:00
Craig Topper
af87dae12c Make PrintReg constructor explicit to prevent weird implicit conversions from accidentally being triggered.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168686 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-27 08:14:24 +00:00
NAKAMURA Takumi
a823f18af4 llvm/CodeGen: Remove empty files in r168659.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168663 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-27 01:21:50 +00:00
Jakub Staszak
af650354a1 Remove unused MachineLoopRanges analysis.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168659 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-27 01:14:34 +00:00
Owen Anderson
9780d352b9 Revert r168635 "Step towards implementation of pass manager with doInitialization and doFinalization per module detangled from runOn?? calls, still has temporary code not to break ASAN to be removed when that pass conforms to the proposed model".
It appears to have broken at least one buildbot.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168654 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-27 00:53:24 +00:00
Michael Ilseman
eb61c920f1 Fast-math optimization: fold multiply by zero
Added in first optimization using fast-math flags to serve as an example for following optimizations. SimplifyInstruction will now try to optimize an fmul observing its FastMathFlags to see if it can fold multiply by zero when 'nnan' and 'nsz' flags are set.



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168648 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-27 00:46:26 +00:00
Michael Ilseman
495d10ad56 Fast-math flags for the bitcode
Added in bitcode enum for the serializing of fast-math flags. Added in the reading/writing of fast-math flags from the OptimizationFlags record for BinaryOps.



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168646 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-27 00:43:38 +00:00
Michael Ilseman
125fc7fefd Fast-math interfaces for Instructions
Add in getter/setter methods for Instructions, allowing them to be the interface to FPMathOperator similarly to now NUS/NSW is handled.



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168642 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-27 00:41:22 +00:00
Michael Ilseman
ab4649b25f Fast-math flags added to FPMathOperator.
Created FastMathFlags convenience struct for the getting and setting of fast-math flags en masse. Added SubclassOptionalData bitfields and corresponding getters/setters to FPMathOperator for the various fast-math flags.



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168641 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-27 00:40:00 +00:00
Owen Anderson
0d30d30d58 Step towards implementation of pass manager with doInitialization and doFinalization per module detangled from runOn?? calls, still has temporary code not to break ASAN to be removed when that pass conforms to the proposed model
Patch by Pedro Artigas, with feedback from by Chandler Carruth.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168635 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-26 23:54:47 +00:00
Benjamin Kramer
ed9e442cf0 Decouple MCInstBuilder from the streamer per Eli's request.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168597 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-26 18:05:52 +00:00
Benjamin Kramer
391271f3bb Add MCInstBuilder, a utility class to simplify MCInst creation similar to MachineInstrBuilder.
Simplify some repetitive code with it. No functionality change.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168587 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-26 13:34:22 +00:00
Joe Abbey
170a15e98d Code Custodian:
- Widespread trailing space removal
  - A dash of OCD spacing to block align enums
  - joined a line that probably needed 80 cols a while back



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168566 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-25 15:23:39 +00:00
Rafael Espindola
f4f14f68f6 Add support for .cfi_register now that it is easy to extent the representation
to support it. Original patch with the parsing and plumbing by the PaX team and
Roman Divacky. I added the bits in MCDwarf.cpp and the test.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168565 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-25 15:14:49 +00:00
Rafael Espindola
14a708b98e Further cleanups. Thanks for Sean Silva for noticing it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168556 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-25 02:50:32 +00:00
Craig Topper
7279809d97 Add an extra slash so doxygen comments will be properly recognized.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168554 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-25 00:59:59 +00:00
Benjamin Kramer
8a2ce5d329 libLTO: Add a utility method to initialize the disassemblers.
Necessary to give disassembler users (like darwin's otool) a possibility to
dlopen libLTO and still initialize the required LLVM bits. This used to go
through libMCDisassembler but that's a gross layering violation, the MC layer
can't pull in functions from the targets. Adding a function to libLTO is a bit
of a hack but not worse than exposing other disassembler bits from libLTO.

Fixes PR14362.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168545 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-24 16:59:10 +00:00
Rafael Espindola
ff233c9e5c Change the representation of MCCFIInstruction.
We now store the Register and Offset directly. MachineLocation is gone (from
this file)!

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168536 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-24 04:33:48 +00:00
Rafael Espindola
7f74d2c2c1 Give each MCCFIInstruction its own opcode.
This untangles the switch cases of the old Move and RelMove opcodes a bit
and makes it clear how to add new instructions.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168534 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-24 03:10:54 +00:00
Rafael Espindola
529a01df02 Move a bit of duplicated code into a helper function.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168533 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-24 02:18:49 +00:00
Rafael Espindola
28c9ea3c13 Refactor how MCCFIInstructions are created.
Give MCCFIInstruction a single, private constructor and add helper static
methods that create each type of cfi instruction. This is is preparation
for changing its representation. The representation with a pair
MachineLocations older than MC and has been abused quiet a bit to support
more cfi instructions.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168532 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-24 02:01:08 +00:00
Rafael Espindola
c8fec7e21f Implement .cfi_undefined. Based on a patch from PaX team, updated by
Roman Divacky. I just added the testcase.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168520 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-23 16:59:41 +00:00
Joey Gouly
f284aefa11 Remove unused parameter Penalty from the BoundsChecking pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168511 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-23 10:47:35 +00:00
Meador Inge
6098c6b56b Add more functions to the target library information.
I discovered a few more missing functions while migrating optimizations
from the simplify-libcalls pass to the instcombine (I already added some
in r167659).

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168501 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-22 15:36:42 +00:00
Akira Hatanaka
e390434251 Add relocations used for mips big GOT.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168448 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-21 19:50:22 +00:00