static local initialization isn't thread safe with MSVC and a race was
reported in PR23817. We can't use std::atomic because it's not trivially
constructible, so instead do some lame volatile global integer
manipulation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239566 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
If malloc/realloc fails then the SmallVector becomes unusable since begin() and
end() will return NULL. This is unlikely to occur but was the cause of recent
bugpoint test failures on my machine.
It is not clear whether not checking for malloc/realloc failure is a deliberate
decision and adding checks has the potential to impact compiler performance.
Therefore, this patch only adds the check to builds with assertions enabled for
the moment.
Reviewers: bkramer
Reviewed By: bkramer
Subscribers: bkramer, llvm-commits
Differential Revision: http://reviews.llvm.org/D9520
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239392 91177308-0d34-0410-b5e6-96231b3b80d8
These are added mainly for the benefit of clang, but this also means that they
are now allowed in .fpu directives and we emit the correct .fpu directive when
single-precision-only is used.
Differential Revision: http://reviews.llvm.org/D10238
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239151 91177308-0d34-0410-b5e6-96231b3b80d8
Add getFPUFeatures to TargetParser, which gets the list of subtarget features
that are enabled/disabled for each FPU, and use it when handling the .fpu
directive.
No functional change in this commit, though clang will start behaving
differently once it starts using this.
Differential Revision: http://reviews.llvm.org/D10237
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239150 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
1) The only caller, ARMTargetParser::parseArch, uses the results for an "endswith" test; so, including the "arm" prefix into the result is unnecessary.
2) Most ARMTargetParser::parseArch callers pass it the output from ARMTargetParser::getCanonicalArchName; so, make this behaviour the default. Then, including the "arm" prefix into the cases is unnecessary.
Reviewers: rengolin
Reviewed By: rengolin
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10249
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239099 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
-march=bpf -> host endian
-march=bpf_le -> little endian
-match=bpf_be -> big endian
Test Plan:
v1 was tested by IBM s390 guys and appears to be working there.
It bit rots too fast here.
Reviewers: chandlerc, tstellarAMD
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10177
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239071 91177308-0d34-0410-b5e6-96231b3b80d8
This allows us to extract version numbers from the environment.
getOSVersion is currently overloaded for that purpose, this allows us to
clean it up.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238796 91177308-0d34-0410-b5e6-96231b3b80d8
The plan was to move the whole table into the already existing ArchExtNames
but some fields depend on a table-generated file, and we don't yet have this
feature in the generic lib/Support side.
Once the minimum target-specific table-generated files are available in a
generic fashion to these libraries, we'll have to keep it in the ASM parser.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238651 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
We would wrap flow mappings and sequences when they go over a hardcoded 70
characters limit. Make the wrapping column configurable (and default to 70
co the change should be NFC for current users). Passing 0 allows to completely
suppress the wrapping which makes it easier to handle in tools like FileCheck.
Reviewers: bogner
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10109
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238584 91177308-0d34-0410-b5e6-96231b3b80d8
Simple change to make arch like "thumbv6" and "armbev6" to return the
correct CPU for FreeBSD and NetBSD.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238353 91177308-0d34-0410-b5e6-96231b3b80d8
Now that most of the methods in Clang and LLVM that were parsing arch/cpu/fpu
strings are using ARMTargetParser, it's time to make it a bit more conforming
with what the ABI says.
This commit adds some clarification on what build attributes are accepted and
which are "non-standard". It also makes clear that the "defaultCPU" and
"defaultArch" methods were really just build attribute getters.
It also diverges from GCC's behaviour to say that armv2/armv3 are really an
ARMv4 in the build attributes, when the ABI has a clear state for that: Pre-v4.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238344 91177308-0d34-0410-b5e6-96231b3b80d8
This commit a 3rd attempt at comitting the initial MIR serialization patch.
The first commit (r237708) was reverted in 237730. Then the second commit
(r237954) was reverted in r238007, as the MIR library under CodeGen caused
a circular dependency where the CodeGen library depended on MIR and MIR
library depended on CodeGen.
This commit has fixed the dependencies between CodeGen and MIR by
reorganizing the MIR serialization code - the code that prints out
MIR has been moved to CodeGen, and the MIR library has been renamed
to MIRParser. Now the CodeGen library doesn't depend on the
MIRParser library, thus the circular dependency no longer exists.
--Original Commit Message--
MIR Serialization: print and parse LLVM IR using MIR format.
This commit is the initial commit for the MIR serialization project.
It creates a new library under CodeGen called 'MIR'. This new
library adds a new machine function pass that prints out the LLVM IR
using the MIR format. This pass is then added as a last pass when a
'stop-after' option is used in llc. The new library adds the initial
functionality for parsing of MIR files as well. This commit also
extends the llc tool so that it can recognize and parse MIR input files.
Reviewers: Duncan P. N. Exon Smith, Matthias Braun, Philip Reames
Differential Revision: http://reviews.llvm.org/D9616
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238341 91177308-0d34-0410-b5e6-96231b3b80d8
Using getCanonicalArchName() is the right way to parse ARM arch names.
Mapping ARMTargetParser IDs to Triple Arch IDs is temporary, until they
are merged into a TargetDescription class.
This was the last LLVM FIXME to move things to ARMTargetParser. Now on
to Clang and beyond.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238110 91177308-0d34-0410-b5e6-96231b3b80d8
Before, getCanonicalArchName was relying on parseArch() to validate the arch
name, which was a problem when other methods, that also needed to call it,
were duplicating the steps.
But to dissociate getCanonicalArchName from parseArch, we needed to make
getCanonicalArchName more robust in detecting valid arch names. It's still
not perfect, but will do for the time being, until we merge Triple with
TargetParser into a TargetDescription mega class.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238047 91177308-0d34-0410-b5e6-96231b3b80d8
This allows us to match armv6m to default to thumb, but will also be used by
Clang's driver and remove the current incomplete copy in it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238036 91177308-0d34-0410-b5e6-96231b3b80d8
This commit is a 2nd attempt at committing the initial MIR serialization patch.
The first commit (r237708) made the incremental buildbots unstable and was
reverted in r237730. The original commit didn't add a terminating null
character to the LLVM IR source which was passed to LLParser, and this
sometimes caused the test 'llvmIR.mir' to fail with a parsing error because
the LLVM IR source didn't have a null character immediately after the end
and thus LLLexer encountered some garbage characters that ultimately caused
the error.
This commit also includes the other test fixes I committed in
r237712 (llc path fix) and r237723 (remove target triple) which
also got reverted in r237730.
--Original Commit Message--
MIR Serialization: print and parse LLVM IR using MIR format.
This commit is the initial commit for the MIR serialization project.
It creates a new library under CodeGen called 'MIR'. This new
library adds a new machine function pass that prints out the LLVM IR
using the MIR format. This pass is then added as a last pass when a
'stop-after' option is used in llc. The new library adds the initial
functionality for parsing of MIR files as well. This commit also
extends the llc tool so that it can recognize and parse MIR input files.
Reviewers: Duncan P. N. Exon Smith, Matthias Braun, Philip Reames
Differential Revision: http://reviews.llvm.org/D9616
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237954 91177308-0d34-0410-b5e6-96231b3b80d8
The commit null terminates the string value in the `yaml::BlockScalarNode`
class.
This change is motivated by the initial MIR serialization commit (r237708)
that I reverted in r237730 because the LLVM IR source from the block
scalar node wasn't terminated by a null character and thus the buildbots
failed on one testcase sometimes. This change enables me to recommit
the reverted commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237942 91177308-0d34-0410-b5e6-96231b3b80d8
The existing code for method StreamingMemoryObject.fetchToPos does not respect
the corresonding call to setKnownObjectSize(). As a result, it allows the
StreamingMemoryObject to read bytes past the object size.
This patch provides a test case, and code to fix the problem.
Patch by Karl Schimpf
Differential Revision: http://reviews.llvm.org/D8931
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237939 91177308-0d34-0410-b5e6-96231b3b80d8
Simplifying Triple::parseARMArch, leaving all the parsing to ARMTargetParser.
This commit also adds AArch64 detection to ARMTargetParser canonicalization,
and a two RedHat arch names (v{6,7}hl, meaning hard-float / little-endian).
Adding enough unit tests to cover the basics. Clang checks fine.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237902 91177308-0d34-0410-b5e6-96231b3b80d8
First ARMTargetParser FIXME, conservatively changing the way we parse CPUs
in the back-end. Still not perfect, with a lot of special cases, but moving
towards a more generic solution.
Moving all logic to the target parser made some unwritten assumptions
about architectures in Clang to break. I've added a lot of architectures
required by Clang, and default to CPUs that Clang believes it should
(and I agree).
I've also added a lot of unit tests, with the correct CPU for each
architecture, and Clang seems to be working correctly, too.
It also became clear that using "unsigned ID" as the argument for the get
methods makes it hard to know what ID, so I also changed the argument names
to match the enum type names.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237797 91177308-0d34-0410-b5e6-96231b3b80d8
The incremental buildbots entered a pass-fail cycle where during the fail
cycle one of the tests from this commit fails for an unknown reason. I
have reverted this commit and will investigate the cause of this problem.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237730 91177308-0d34-0410-b5e6-96231b3b80d8
This change implements basic support for DWARF alternate sections
proposal: http://www.dwarfstd.org/ShowIssue.php?issue=120604.1&type=open
LLVM tools now understand new forms: DW_FORM_GNU_ref_alt and
DW_FORM_GNU_strp_alt, which are used as references to .debug_info and
.debug_str sections respectively, stored in a separate file, and
possibly shared between different executables / shared objects.
llvm-dwarfdump and llvm-symbolizer don't yet know how to access this
alternate debug file (usually pointed by .gnu_debugaltlink section),
but they can at lease properly parse and dump regular files, which
refer to it.
This change should fix crashes of llvm-dwarfdump and llvm-symbolizer on
files produced by running "dwz" tool. Such files are already installed
on some modern Linux distributions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237721 91177308-0d34-0410-b5e6-96231b3b80d8
This commit is the initial commit for the MIR serialization project.
It creates a new library under CodeGen called 'MIR'. This new
library adds a new machine function pass that prints out the LLVM IR
using the MIR format. This pass is then added as a last pass when a
'stop-after' option is used in llc. The new library adds the initial
functionality for parsing of MIR files as well. This commit also
extends the llc tool so that it can recognize and parse MIR input files.
Reviewers: Duncan P. N. Exon Smith, Matthias Braun, Philip Reames
Differential Revision: http://reviews.llvm.org/D9616
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237708 91177308-0d34-0410-b5e6-96231b3b80d8
The destructor of BlockScalarNode is never called. Store the contained
string in BumpPtrAllocated memory instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237614 91177308-0d34-0410-b5e6-96231b3b80d8
This commit gives the users of the YAML Traits I/O library
the ability to serialize scalars using the YAML literal block
scalar notation by allowing them to implement a specialization
of the `BlockScalarTraits` struct for their custom types.
Reviewers: Duncan P. N. Exon Smith
Differential Revision: http://reviews.llvm.org/D9613
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237404 91177308-0d34-0410-b5e6-96231b3b80d8
The commit r237314 that implements YAML block parsing
introduced a leak that was caught by the ASAN linux buildbot.
YAML Parser stores its tokens in an ilist, and allocates
tokens using a BumpPtrAllocator, but doesn't call the
destructor for the allocated tokens. R237314 added an
std::string field to a Token which leaked as the Token's
destructor wasn't called. This commit fixes this leak
by calling the Token's destructor when a Token is being
removed from an ilist of tokens.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237389 91177308-0d34-0410-b5e6-96231b3b80d8
This commit implements the parsing of YAML block scalars.
Some code existed for it before, but it couldn't parse block
scalars.
This commit adds a new yaml node type to represent the block
scalar values.
This commit also deletes the 'spec-09-27' and 'spec-09-28' tests
as they are identical to the test file 'spec-09-26'.
This commit introduces 3 new utility functions to the YAML scanner
class: `skip_s_space`, `advanceWhile` and `consumeLineBreakIfPresent`.
Reviewers: Duncan P. N. Exon Smith
Differential Revision: http://reviews.llvm.org/D9503
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237314 91177308-0d34-0410-b5e6-96231b3b80d8
The TargetRegistry is just a namespace-like class, instantiated in one
place to use a range-based for loop. Instead, expose access to the
registry via a range-based 'targets()' function instead. This makes most
uses a bit awkward/more verbose - but eventually we should just add a
range-based find_if function which will streamline these functions. I'm
happy to mkae them a bit awkward in the interim as encouragement to
improve the algorithms in time.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237059 91177308-0d34-0410-b5e6-96231b3b80d8
This new class in a global context contain arch-specific knowledge in order
to provide LLVM libraries, tools and projects with the ability to understand
the architectures. For now, only FPU, ARCH and ARCH extensions on ARM are
supported.
Current behaviour it to parse from free-text to enum values and back, so that
all users can share the same parser and codes. This simplifies a lot both the
ASM/Obj streamers in the back-end (where this came from), and the front-end
parsers for command line arguments (where this is going to be used next).
The previous implementation, using .def/.h includes is deprecated due to its
inflexibility to be built without the backend support and for being too
cumbersome. As more architectures join this scheme, and as more features of
such architectures are added (such as hardware features, type sizes, etc) into
a full blown TargetDescription class, having a set of classes is the most
sane implementation.
The ultimate goal of this refactor both LLVM's and Clang's target description
classes into one unique interface, so that we can de-duplicate and standardise
the descriptions, as well as make it available for other front-ends, tools,
etc.
The FPU parsing for command line options in Clang has been converted to use
this new library and a number of aliases were added for compatibility:
* A bogus neon-vfpv3 alias (neon defaults to vfp3)
* armv5/v6
* {fp4/fp5}-{sp/dp}-d16
Next steps:
* Port Clang's ARCH/EXT parsing to use this library.
* Create a TableGen back-end to generate this information.
* Run this TableGen process regardless of which back-ends are built.
* Expose more information and rename it to TargetDescription.
* Continue re-factoring Clang to use as much of it as possible.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236900 91177308-0d34-0410-b5e6-96231b3b80d8
Restructure Triple::getARMCPUForArch so that invalid values will
return nullptr, while retaining the behaviour that an argument
specifying no particular architecture version will give a default
CPU. This will be used by clang to give an error on invalid -march
values.
Also restructure the extraction of the architecture version from
the MArch string a little to hopefully make what it's doing clearer.
Differential Revision: http://reviews.llvm.org/D9599
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236845 91177308-0d34-0410-b5e6-96231b3b80d8