Other than recognizing the attribute, the patch does little else.
It changes the branch probability analyzer so that edges into
blocks postdominated by a cold function are given low weight.
Added analysis and code generation tests. Added documentation for the
new attribute.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182638 91177308-0d34-0410-b5e6-96231b3b80d8
This implements the @llvm.readcyclecounter intrinsic as the specific
MRC instruction specified in the ARM manuals for CPUs with the Power
Management extensions.
Older CPUs had slightly different methods which may also have to be
implemented eventually, but this should cover all v7 cases.
rdar://problem/13939186
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182603 91177308-0d34-0410-b5e6-96231b3b80d8
The r600 backend has been in tree for some time now. Marking it as
non-experimental to avoid accidental breakage.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182442 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch allows using \n inside long help strings for command-line
options, so that all lines are equally indented. This is not a perfect solution,
as we don't (and probably don't want to) know about terminal width, but it
allows to format long help strings somehow readable without manually padding
them with spaces. A motivating example is -help output from clang-format (source
code in tools/clang-format/ClangFormat.cpp, see cl options offset, length,
style, and dump-config).
Reviewers: atrick, alexfh
Reviewed By: alexfh
CC: llvm-commits, rafael
Differential Revision: http://llvm-reviews.chandlerc.com/D779
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181608 91177308-0d34-0410-b5e6-96231b3b80d8
The idea is that docs/ReleaseNotes.rst is 3.3 and will be copied to the
branch by the release manager just before creating the release
candidates.
This ReleaseNotes_34.rst will then be moved over ReleaseNotes.rst after
the 3.3 release.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181349 91177308-0d34-0410-b5e6-96231b3b80d8
This patch wires up the SystemZ target in configure, so that it can now be
built using --enable-targets=systemz. It is not yet included in the default
build (--enable-targets=all); this will be done by a follow-up patch.
Patch by Richard Sandiford.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181208 91177308-0d34-0410-b5e6-96231b3b80d8
The soon-to-be-committed SystemZ port uses 128-bit IEEE floats.
MIPS64 GNU/Linux does too (albeit with unusual NaNs).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181016 91177308-0d34-0410-b5e6-96231b3b80d8
Build attribute sections can now be read if they exist via ELFObjectFile, and
the llvm-readobj tool has been extended with an option to dump this information
if requested. Regression tests are also included which exercise these features.
Also update the docs with a fixed ARM ABI link and a new link to the Addenda
which provides the build attributes specification.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181009 91177308-0d34-0410-b5e6-96231b3b80d8
Also add a check for llvm.used in the verifier and simplify clients now that
they can assume they have a ConstantArray.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180019 91177308-0d34-0410-b5e6-96231b3b80d8
This option expands shown relocations from single line to a dictionary
format:
Relocation {
Offset: 0x4
Type: R_386_32 (1)
Symbol: sym
Info: 0x0
}
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179359 91177308-0d34-0410-b5e6-96231b3b80d8
Add support for the COFF relocation types IMAGE_REL_I386_DIR32NB and
IMAGE_REL_AMD64_ADDR32NB for 32- and 64-bit respectively. These are
similar to normal 4-byte relocations except that they do not include
the base address of the image.
Image-relative relocations are used for debug information (32-bit) and
SEH unwind tables (64-bit).
A new MCSymbolRef variant called 'VK_COFF_IMGREL32' is introduced to
specify such relocations. For AT&T assembly, this variant can be accessed
using the symbol suffix '@imgrel'.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179240 91177308-0d34-0410-b5e6-96231b3b80d8
Nobody says "the developer's list" or "commits archive"; they always say
"llvmdev" or "llvm-commits". It makes sense for our documentation to
at least make that association explicitly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178425 91177308-0d34-0410-b5e6-96231b3b80d8
std::lower_bound is the canonical "binary search" in the STL
(std::binary_search generally is not what you want). The name actually
makes a lot of sense (and also has a beautiful symmetry with the
std::upper_bound algorithm). The name is nonetheless non-obvious.
Also, remove mention of "radix search". It's not even clear how that
would work in the context of a sorted vector. AFAIK "radix search" only
makes sense when you have a trie-like data structure.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178376 91177308-0d34-0410-b5e6-96231b3b80d8
DAG arguments can optionally be named:
(dag node, node:$name)
With this change, the node is also optional:
(dag node, node:$name, $name)
The missing node is treated as an UnsetInit, so the above is equivalent
to:
(dag node, node:$name, ?:$name)
This syntax is useful in output patterns where we currently require the
types of variables to be repeated:
def : Pat<(subc i32:$b, i32:$c), (SUBCCrr i32:$b, i32:$c)>;
This is preferable:
def : Pat<(subc i32:$b, i32:$c), (SUBCCrr $b, $c)>;
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177843 91177308-0d34-0410-b5e6-96231b3b80d8
Also update the documentation since Sparc is the nicest backend, and
used as an example in WritingAnLLVMBackend.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177835 91177308-0d34-0410-b5e6-96231b3b80d8
The new wording cannot be construed as suggesting the use of
SmallVectorImpl<T> as e.g. a class member (just because the class
happens to be in an interface).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177778 91177308-0d34-0410-b5e6-96231b3b80d8
of complex instruction operands (e.g. address modes).
Currently, if a Pat pattern creates an instruction that has a complex
operand (i.e. one that consists of multiple sub-operands at the MI
level), this operand must match a ComplexPattern DAG pattern with the
correct number of output operands.
This commit extends TableGen to alternatively allow match a complex
operands against multiple separate operands at the DAG level.
This allows using Pat patterns to match pre-increment nodes like
pre_store (which must have separate operands at the DAG level) onto
an instruction pattern that uses a multi-operand memory operand,
like the following example on PowerPC (will be committed as a
follow-on patch):
def STWU : DForm_1<37, (outs ptr_rc:$ea_res), (ins GPRC:$rS, memri:$dst),
"stwu $rS, $dst", LdStStoreUpd, []>,
RegConstraint<"$dst.reg = $ea_res">, NoEncode<"$ea_res">;
def : Pat<(pre_store GPRC:$rS, ptr_rc:$ptrreg, iaddroff:$ptroff),
(STWU GPRC:$rS, iaddroff:$ptroff, ptr_rc:$ptrreg)>;
Here, the pair of "ptroff" and "ptrreg" operands is matched onto the
complex operand "dst" of class "memri" in the "STWU" instruction.
Approved by Jakob Stoklund Olesen.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177428 91177308-0d34-0410-b5e6-96231b3b80d8
These are two related changes (one in llvm, one in clang).
LLVM:
- rename address_safety => sanitize_address (the enum value is the same, so we preserve binary compatibility with old bitcode)
- rename thread_safety => sanitize_thread
- rename no_uninitialized_checks -> sanitize_memory
CLANG:
- add __attribute__((no_sanitize_address)) as a synonym for __attribute__((no_address_safety_analysis))
- add __attribute__((no_sanitize_thread))
- add __attribute__((no_sanitize_memory))
for S in address thread memory
If -fsanitize=S is present and __attribute__((no_sanitize_S)) is not
set llvm attribute sanitize_S
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176075 91177308-0d34-0410-b5e6-96231b3b80d8
The 'nobuiltin' attribute is applied to call sites to indicate that LLVM should
not treat the callee function as a built-in function. I.e., it shouldn't try to
replace that function with different code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175835 91177308-0d34-0410-b5e6-96231b3b80d8
This is based on Bill Wendling's email. No additional content has been added,
but now there's a place for Attributes to capture future information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174961 91177308-0d34-0410-b5e6-96231b3b80d8
This updates the current references to links that work for me.
In the future, we should update the list of references itself to provide
information on newer architecture variants.
Thanks to Sean Silva for pointing out that the current links were broken!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174739 91177308-0d34-0410-b5e6-96231b3b80d8
Attribute groups are of the form:
#0 = attributes { noinline "no-sse" "cpu"="cortex-a8" alignstack=4 }
Target-dependent attributes are represented as strings. Attributes can have
optional values associated with them. E.g., the "cpu" attribute has the value
"cortex-a8".
Target-independent attributes are listed as enums inside the attribute classes.
Multiple attribute groups can be referenced by the same object. In that case,
the attributes are merged together.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174493 91177308-0d34-0410-b5e6-96231b3b80d8
definition
Current practice is not to use 'inline' in:
class Foo {
public:
inline void bar() {
// ...
}
};
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174317 91177308-0d34-0410-b5e6-96231b3b80d8
Makefile.config.
This is implied at the bottom of the help text of configure (besides
CC/CXX/LDFLAGS, already passed to Makefile.config).
For backward compatibility, the values of CFLAGS and CXXFLAGS defaults
to empty, overriding the default values provided by autoconf (for
example, '-g -O2' when CC=gcc').
$(CPP) is not used by our makefiles. Therefore, the value of CPP is
not passed to Makefile.config, despite beeing mentioned by 'configure
--help'.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174313 91177308-0d34-0410-b5e6-96231b3b80d8
GlobalVariable about LLVM's assumptions vis-a-vis Global Variable
initial values and Global Variable initializers.
This is in preparation for adding the new keyword
externally_initialized.
Specifically, the patch explains how LLVM optimizes global initializers
by assumign that global variables defined within the module are not
modified from their initial values before the start of the global
initializer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174269 91177308-0d34-0410-b5e6-96231b3b80d8
My "excuse" for not refactoring the grammar here is to not diverge too
far from the grammar in the comments of TGParser.cpp, since I'm not
taking on the quest of majorly refactoring TGParser.cpp at the moment.
One benefit of doing this is that Ideas for refactoring and clarifying
the grammar in this document should translate almost immediately to
beneficial refactorings that can be made to TGParser.cpp.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174144 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds support for AArch64 (ARM's 64-bit architecture) to
LLVM in the "experimental" category. Currently, it won't be built
unless requested explicitly.
This initial commit should have support for:
+ Assembly of all scalar (i.e. non-NEON, non-Crypto) instructions
(except the late addition CRC instructions).
+ CodeGen features required for C++03 and C99.
+ Compilation for the "small" memory model: code+static data <
4GB.
+ Absolute and position-independent code.
+ GNU-style (i.e. "__thread") TLS.
+ Debugging information.
The principal omission, currently, is performance tuning.
This patch excludes the NEON support also reviewed due to an outbreak of
batshit insanity in our legal department. That will be committed soon bringing
the changes to precisely what has been approved.
Further reviews would be gratefully received.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174054 91177308-0d34-0410-b5e6-96231b3b80d8
prevent an llvm developer from mistakenly thinking that just because the
intrinsic has volatile flags that volatile operations can be converted
to or folded into them.
Platforms may rely on volatile loads and stores of natively supported
data width to be executed as single instruction. When compiling
C, this expectation likely holds for l-values of volatile primitive
types with native hardware support, but not necessarily for aggregate
types. The frontend upholds these expectations, which are not
specified in the IR.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173974 91177308-0d34-0410-b5e6-96231b3b80d8
Boilerplate is often the hardest part of getting started with these
kinds of things, so throw them a bone.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173969 91177308-0d34-0410-b5e6-96231b3b80d8
custom git script called git-svnup which handles all of the work of
using the git-mirrors/keeping the git-svn numbers in sync.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173472 91177308-0d34-0410-b5e6-96231b3b80d8
This adds an !add(a, b) operator to tablegen; this will be used
to cleanup the PPC register definitions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173445 91177308-0d34-0410-b5e6-96231b3b80d8
The requirements of the strong heuristic are:
* A Protector is required for functions which contain an array, regardless of
type or length.
* A Protector is required for functions which contain a structure/union which
contains an array, regardless of type or length. Note, there is no limit to
the depth of nesting.
* A protector is required when the address of a local variable (i.e., stack
based variable) is exposed. (E.g., such as through a local whose address is
taken as part of the RHS of an assignment or a local whose address is taken as
part of a function argument.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173231 91177308-0d34-0410-b5e6-96231b3b80d8
SSPStrong applies a heuristic to insert stack protectors in these situations:
* A Protector is required for functions which contain an array, regardless of
type or length.
* A Protector is required for functions which contain a structure/union which
contains an array, regardless of type or length. Note, there is no limit to
the depth of nesting.
* A protector is required when the address of a local variable (i.e., stack
based variable) is exposed. (E.g., such as through a local whose address is
taken as part of the RHS of an assignment or a local whose address is taken as
part of a function argument.)
This patch implements the SSPString attribute to be equivalent to
SSPRequired. This will change in a subsequent patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173230 91177308-0d34-0410-b5e6-96231b3b80d8
