FYI, removed the unused MCInstrAnalysis as it does not exist for 64-bit ARM and
was causing a “couldn't initialize disassembler for target” error.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222045 91177308-0d34-0410-b5e6-96231b3b80d8
We would attempt to replace a fptrunc of an frem with an identical
fptrunc. This would cause the new fptrunc to be added to the worklist.
Of course, this results in an infinite loop because we will keep
visiting the newly created fptruncs.
This fixes PR21576.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222040 91177308-0d34-0410-b5e6-96231b3b80d8
doing Load PRE"
This commit updates the failing test in
Analysis/TypeBasedAliasAnalysis/gvn-nonlocal-type-mismatch.ll
The failing test is sensitive to the order in which we process loads. This
version turns on the RPO traversal instead of the while DT traversal in GVN.
The new test code is functionally same just the order of loads that are
eliminated is swapped.
This new version also fixes an issue where GVN splits a critical edge and
potentially invalidate the RPO/DT iterator.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222039 91177308-0d34-0410-b5e6-96231b3b80d8
based on instruction complexity
The order that tablegen fast-isel instruction code is generated is
currently based on the text of the predicate (using string
less-than). This patch changes this to instead use the instruction
complexity. Because the complexities are not unique a C++ multimap is
used instead of a map.
This fixes the problem where code with no predicate always comes out
first (the empty string always compares as less than all other
strings) thus making the code with predicates dead code. See the FMUL
code in PPCFastISel.cpp for an example. It also more closely matches
the normal codegen ordering. Some error checking in the tablegen
fast-isel code is fixed as well.
Patch by Bill Seurer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222038 91177308-0d34-0410-b5e6-96231b3b80d8
If we have spilled the value of the m0 register, then we need to restore
it with v_readlane_b32 to a regular sgpr, because v_readlane_b32 can't
write to m0.
v_readlane_b32 can't write to m0, so
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222036 91177308-0d34-0410-b5e6-96231b3b80d8
This allows COFF targets to emit accelerator tables
when requested by -dwarf-accel-tables=Enable instead
of aborting. The test DebugInfo/cross-cu-inlining.ll
covers this on COFF platforms.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222034 91177308-0d34-0410-b5e6-96231b3b80d8
SizeOfHeaders must be aligned to the FileAlignment.
SizeOfImage must be at least the SizeOfHeaders aligned to the
SectionAlignment.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222030 91177308-0d34-0410-b5e6-96231b3b80d8
ELF targets (and maybe COFF) use relocations when referring
to strings in the .debug_str section. Handle that in the
accelerator table dumper. This commit restores the
test/DebugInfo/cross-cu-inlining.ll test to its expected
platform independant form, validating that the fix works
(this test failed on linux boxes).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222029 91177308-0d34-0410-b5e6-96231b3b80d8
If this workaround gets the bots green, then we have to find out
why the -dwarf-accel-tables=Enable option doesn't work as
expected on non-darwin platforms.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222007 91177308-0d34-0410-b5e6-96231b3b80d8
Prior to this commit fmul and fadd binary operators were being canonicalized for
both scalar and vector versions. We now canonicalize add, mul, and, or, and xor
vector instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222006 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r221842 which was a revert of r221836 and of the
test parts of r221837.
This new version fixes an UB bug pointed out by David (along with
addressing some other review comments), makes some dumping more
resilient to broken input data and forces the accelerator tables
to be dumped in the tests where we use them (this decision is
platform specific otherwise).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222003 91177308-0d34-0410-b5e6-96231b3b80d8
This was done using the Sparc and PowerPC AsmParsers as guides. So far it
is very simple and only supports sopp instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221994 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds builtin support for xvdivdp and xvdivsp, along with a
test case. Straightforward stuff.
There's a companion patch for Clang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221983 91177308-0d34-0410-b5e6-96231b3b80d8
In support of serializing executables, obj2yaml now records the virtual address
and size of sections. It also serializes whatever we strictly need from
the PE header, it expects that it can reconstitute everything else via
inference.
yaml2obj can reconstitute a fully linked executable.
In order to get executables correctly serialized/deserialized, other
bugs were fixed as a circumstance. We now properly respect file and
section alignments. We also avoid writing out string tables unless they
are strictly necessary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221975 91177308-0d34-0410-b5e6-96231b3b80d8
This matches std::vector and is more efficient as it avoids
truncations.
With this the text segment of opt goes from 19705442 bytes
to 19703930 bytes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221973 91177308-0d34-0410-b5e6-96231b3b80d8
This teaches CoverageMapping::getCoveredFunctions to filter to a
particular file and uses that to replace most of the logic found in
llvm-cov report.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221962 91177308-0d34-0410-b5e6-96231b3b80d8
getTargetConstant should only be used when you can guarantee the instruction
selected will be able to cope with the raw value. BUILD_VECTOR is rather too
generic for this so we should use getConstant instead. In that case, an
instruction can still consume the constant, but if it doesn't it'll be
materialised through its own round of ISel.
Should fix PR21352.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221961 91177308-0d34-0410-b5e6-96231b3b80d8
Stop using `Value::getName()` to get the string behind an `MDString`.
Switch to `StringMapEntry<MDString>` so that we can find the string by
its coallocation.
This is part of PR21532.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221960 91177308-0d34-0410-b5e6-96231b3b80d8
When "MBB->Insert(It, ...)" is called, we want It to be pointing inside the
correct basic block. No actual failures at the moment, but it's caused problems
before.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221953 91177308-0d34-0410-b5e6-96231b3b80d8
Hide the fact that `MDString`'s string is stored in `Value::Name` --
that's going to change soon. Update the only in-tree client that was
using it instead of `Value::getString()`.
Part of PR21532.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221951 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This has most of what is needed for mips fast-isel call lowering for O32.
What is missing I will add on the next patch because this patch is already too large.
It should not be doing anything wrong but it will punt on some cases that it is basically
capable of doing.
The mechanism is there for parameters to be passed on the stack but I have not enabled it because it serves as a way for now to prevent some of the strange cases of O32 register passing that I have not fully checked yet and have some issues.
The Mips O32 abi rules are very complicated as far how data is passed in floating and integer registers.
However there is a way to think about this all very simply and this implementation reflects that.
Basically, the ABI rules are written as if everything is passed on the stack and aligned as such.
Once that is conceptually done, it is nearly trivial to reassign those locations to registers and
then all the complexity disappears.
So I have told tablegen that all the data is passed on the stack and during the lowering I fix
this by assigning to registers as per the ABI doc.
This has been my approach and you can line up what I did with the ABI document and see 1 to 1 what
is going on.
Test Plan: callabi.ll
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: jholewinski, echristo, ahatanak, llvm-commits, rfuhler
Differential Revision: http://reviews.llvm.org/D5714
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221948 91177308-0d34-0410-b5e6-96231b3b80d8
Fix for LLI failure on Windows\X86: http://llvm.org/PR5053
LLI.exe crashes on Windows\X86 when single precession floating point
intrinsics like the following are used: acos, asin, atan, atan2, ceil,
copysign, cos, cosh, exp, floor, fmin, fmax, fmod, log, pow, sin, sinh,
sqrt, tan, tanh
The above intrinsics are defined as inline-expansions in math.h, and are
not exported by msvcr120.dll (Win32 API GetProcAddress returns null).
For an FREM instruction, the JIT compiler generates a call to a stub for
the fmodf() intrinsic, and adds a relocation to fixup at load time. The
loader searches the libraries for the function, but fails because the
symbol is not exported. So, the call target remains NULL and the
execution crashes.
Since the math functions are loaded at JIT/runtime, the JIT can patch
CALL instruction directly instead of the searching the libraries'
exported symbols. However, this fix caused build failures due to
unresolved symbols like _fmodf at link time.
Therefore, the current fix defines helper functions in the Runtime
link/load library to perform the above operations. The address of these
helper functions are used to patch up the CALL instruction at load time.
Reviewers: lhames, rnk
Reviewed By: rnk
Differential Revision: http://reviews.llvm.org/D5387
Patch by Swaroop Sridhar!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221947 91177308-0d34-0410-b5e6-96231b3b80d8
