into a separate header to allow clients to use them without pulling in
SelectionDAG-specific declarations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@101268 91177308-0d34-0410-b5e6-96231b3b80d8
MachineBasicBlock::livein_iterator a const_iterator, because
clients shouldn't ever be using the iterator interface to
mutate the livein set.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@101147 91177308-0d34-0410-b5e6-96231b3b80d8
1. Introduce some enums and accessors in the InlineAsm class
that eliminate a ton of magic numbers when handling inline
asm SDNode.
2. Add a new MDNodeSDNode selection dag node type that holds
a MDNode (shocking!)
3. Add a new argument to ISD::INLINEASM nodes that hold !srcloc
metadata, propagating it to the instruction emitter, which
drops it.
No functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@100605 91177308-0d34-0410-b5e6-96231b3b80d8
"Print" methods to "Emit". Emit is something that goes
to an mc streamer, Print is something that goes to a
raw_ostream (for inline asm)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@100337 91177308-0d34-0410-b5e6-96231b3b80d8
"asm printering" happens through MCStreamer. This also
Streamerizes PIC16 debug info, which escaped my attention.
This removes a leak from LLVMTargetMachine of the 'legacy'
output stream.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@100327 91177308-0d34-0410-b5e6-96231b3b80d8
Added support for address spaces and added a isVolatile field to memcpy, memmove, and memset,
e.g., llvm.memcpy.i32(i8*, i8*, i32, i32) -> llvm.memcpy.p0i8.p0i8.i32(i8*, i8*, i32, i32, i1)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@100304 91177308-0d34-0410-b5e6-96231b3b80d8
EmitInlineAsm. However, this attempt is foiled by operands
being emitted directly to "O" so I'll have to do some surgery
and finish MCizing the world.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@100291 91177308-0d34-0410-b5e6-96231b3b80d8
If we have an MCAsmStreamer, we continue to emit asm textually,
otherwise we (currently) emit an error to errs and ignore it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@100289 91177308-0d34-0410-b5e6-96231b3b80d8
source addition. Apparently the buildbots were wrong about failures.
---
Add some switches helpful for debugging:
-print-before=<Pass Name>
Dump IR before running pass <Pass Name>.
-print-before-all
Dump IR before running each pass.
-print-after-all
Dump IR after running each pass.
These are helpful when tracking down a miscompilation. It is easy to
get IR dumps and do diffs on them, etc.
To make this work well, add a new getPrinterPass API to Pass so that
each kind of pass (ModulePass, FunctionPass, etc.) can create a Pass
suitable for dumping out the kind of object the Pass works on.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@100249 91177308-0d34-0410-b5e6-96231b3b80d8
representation. This eliminates the 'DILocation' MDNodes for
file/line/col tuples from -O0 -g codegen.
This remove the old DebugLoc class, making it a typedef for DebugLoc,
I'll rename NewDebugLoc next.
I didn't update the JIT to use the new apis, so it will continue to
work, but be as slow as before. Someone should eventually do this
or, better yet, rip out the JIT debug info stuff and build the JIT
on top of MC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@100209 91177308-0d34-0410-b5e6-96231b3b80d8
<string> include. For some reason the buildbot choked on this while my
builds did not. It's probably due to a difference in system headers.
---
Add some switches helpful for debugging:
-print-before=<Pass Name>
Dump IR before running pass <Pass Name>.
-print-before-all
Dump IR before running each pass.
-print-after-all
Dump IR after running each pass.
These are helpful when tracking down a miscompilation. It is easy to
get IR dumps and do diffs on them, etc.
To make this work well, add a new getPrinterPass API to Pass so that
each kind of pass (ModulePass, FunctionPass, etc.) can create a Pass
suitable for dumping out the kind of object the Pass works on.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@100204 91177308-0d34-0410-b5e6-96231b3b80d8
Added support for address spaces and added a isVolatile field to memcpy, memmove, and memset,
e.g., llvm.memcpy.i32(i8*, i8*, i32, i32) -> llvm.memcpy.p0i8.p0i8.i32(i8*, i8*, i32, i32, i1)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@100191 91177308-0d34-0410-b5e6-96231b3b80d8
-print-before=<Pass Name>
Dump IR before running pass <Pass Name>.
-print-before-all
Dump IR before running each pass.
-print-after-all
Dump IR after running each pass.
These are helpful when tracking down a miscompilation. It is easy to
get IR dumps and do diffs on them, etc.
To make this work well, add a new getPrinterPass API to Pass so that
each kind of pass (ModulePass, FunctionPass, etc.) can create a Pass
suitable for dumping out the kind of object the Pass works on.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@100143 91177308-0d34-0410-b5e6-96231b3b80d8
e.g., llvm.memcpy.i32(i8*, i8*, i32, i32) -> llvm.memcpy.p0i8.p0i8.i32(i8*, i8*, i32, i32, i1)
A update of langref will occur in a subsequent checkin.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@99928 91177308-0d34-0410-b5e6-96231b3b80d8
This is same as r99772 (which was reverted) with just one meaningful difference where two source lines exchanged their positions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@99816 91177308-0d34-0410-b5e6-96231b3b80d8
1, 1 cases which are by-far the most frequent. This shrinks the X86
isel table from 77014 -> 74657 bytes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@99740 91177308-0d34-0410-b5e6-96231b3b80d8
Here is a theoretical example that illustrates why the placement is important.
tmp1 =
store tmp1 -> x
...
tmp2 = add ...
...
call
...
store tmp2 -> x
Now mem2reg comes along:
tmp1 =
dbg_value (tmp1 -> x)
...
tmp2 = add ...
...
call
...
dbg_value (tmp2 -> x)
When the debugger examine the value of x after the add instruction but before the call, it should have the value of tmp1.
Furthermore, for dbg_value's that reference constants, they should not be emitted at the beginning of the block (since they do not have "producers").
This patch also cleans up how SDISel manages DbgValue nodes. It allow a SDNode to be referenced by multiple SDDbgValue nodes. When a SDNode is deleted, it uses the information to find the SDDbgValues and invalidate them. They are not deleted until the corresponding SelectionDAG is destroyed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@99469 91177308-0d34-0410-b5e6-96231b3b80d8
--- Reverse-merging r99440 into '.':
U test/MC/AsmParser/X86/x86_32-bit_cat.s
U test/MC/AsmParser/X86/x86_32-encoding.s
U include/llvm/IntrinsicsX86.td
U include/llvm/CodeGen/SelectionDAGNodes.h
U lib/Target/X86/X86InstrSSE.td
U lib/Target/X86/X86ISelLowering.h
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@99450 91177308-0d34-0410-b5e6-96231b3b80d8
disabled for several months (since svn r88806) and no one noticed. My fix
for pr6543 yesterday reenabled it, but broke the ARM port's code for using
TBB/TBH. Rather than adding a target hook to disable merging for Thumb2 only,
I'm just taking this out. It is not common to have identical jump tables,
the code we used to merge them was O(N^2), and it only helps code size, not
performance.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@98977 91177308-0d34-0410-b5e6-96231b3b80d8
always create a new jump table. The intention was to avoid merging jump
tables in SelectionDAGBuilder, and to wait for the branch folding pass to
merge tables. Unfortunately, the same getJumpTableIndex() method is also
used to merge tables in branch folding, so as a result of this change
branch tables are never merged. Worse, the branch folding code is expecting
getJumpTableIndex to always return the index of an existing table, but with
this change, it never does so. In at least some cases, e.g., pr6543, this
creates references to non-existent tables.
I've fixed the problem by adding a new createJumpTableIndex function, which
will always create a new table, and I've changed getJumpTableIndex to only
look at existing tables.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@98845 91177308-0d34-0410-b5e6-96231b3b80d8
to LLVM IR changes with addr label weirdness. In the testcase, we
generate references to the two bb's when codegen'ing the first
function:
_test1: ## @test1
leaq Ltmp0(%rip), %rax
..
leaq Ltmp1(%rip), %rax
Then continue to codegen the second function where the blocks
get merged. We're now smart enough to emit both labels, producing
this code:
_test_fun: ## @test_fun
## BB#0: ## %entry
Ltmp1: ## Block address taken
Ltmp0:
## BB#1: ## %ret
movl $-1, %eax
ret
Rejoice.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@98595 91177308-0d34-0410-b5e6-96231b3b80d8
label is generated, but then the block is deleted. Since the
value is undefined, we just emit the label right after the entry
label of the function. It might matter that the label is in the
same section as the function was afterall.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@98579 91177308-0d34-0410-b5e6-96231b3b80d8
function, then the BB is RAUW'd before the definition is emitted. There
are still two cases not being handled, but this should improve us back to
the situation before I touched anything.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@98566 91177308-0d34-0410-b5e6-96231b3b80d8
label instead of trying to form one based on the BB name (which
causes collisions if the name is empty). This fixes PR6608
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@98495 91177308-0d34-0410-b5e6-96231b3b80d8
an MCSymbol. Make the EH_LABEL MachineInstr hold its label
with an MCSymbol instead of ID. Fix a bug in MMI.cpp which
would return labels named "Label4" instead of "label4".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@98463 91177308-0d34-0410-b5e6-96231b3b80d8
instead of label ID's. This cleans up and regularizes a bunch
of code and makes way for future progress.
Unfortunately, this pointed out to me that JITDwarfEmitter.cpp
is largely copy and paste from DwarfException/MachineModuleInfo
and other places. This is very sad and disturbing. :(
One major change here is that TidyLandingPads moved from being
called in DwarfException::BeginFunction to being called in
DwarfException::EndFunction. There should not be any
functionality change from doing this, but I'm not an EH expert.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@98459 91177308-0d34-0410-b5e6-96231b3b80d8
and passing off ownership to AsmPrinter. Now MachineModuleInfo
creates it and owns it by value. This allows us to use MCSymbols
more consistently throughout the rest of the code generator, and
simplifies a bit of code. This also allows MachineFunction to
keep an MCContext reference handy, and cleans up the TargetRegistry
interfaces for AsmPrinters.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@98450 91177308-0d34-0410-b5e6-96231b3b80d8
an MCExpr and not an MCSymbol. Change it to take an MCStreamer,
which is currently unused.
No functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@98278 91177308-0d34-0410-b5e6-96231b3b80d8
cl = EXTRACT_SUBREG reg1024, 1, is overly conservative. It should check
for overlaps of vr's live interval with the super registers of the
physical register (ECX in this case) and let JoinIntervals() handle checking
the coalescing feasibility against the physical register (cl in this case).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@98251 91177308-0d34-0410-b5e6-96231b3b80d8
indicates that an MCSymbol is external or not. (It's true if it's external.)
This will be used to specify the correct information to add to non-lazy
pointers. That will be explained further when this bit is used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@98199 91177308-0d34-0410-b5e6-96231b3b80d8
and add a FIXME about how we are eventually going to zap this
lookup table once mc world domination is complete.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@98031 91177308-0d34-0410-b5e6-96231b3b80d8
entry we're about to process is obviously going to fail, don't
bother pushing a scope only to have it immediately be popped.
This avoids a lot of scope stack traffic in common cases.
Unfortunately, this requires duplicating some of the predicate
dispatch. To avoid duplicating the actual logic I pulled each
predicate out to its own static function which gets used in
both places.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97651 91177308-0d34-0410-b5e6-96231b3b80d8
SwitchOpcodeMatcher) and have DAGISelMatcherOpt form it. This
speeds up selection, particularly for X86 which has lots of
variants of instructions with only type differences.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97645 91177308-0d34-0410-b5e6-96231b3b80d8
- Eliminate TargetInstrInfo::isIdentical and replace it with produceSameValue. In the default case, produceSameValue just checks whether two machine instructions are identical (except for virtual register defs). But targets may override it to check for unusual cases (e.g. ARM pic loads from constant pools).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97628 91177308-0d34-0410-b5e6-96231b3b80d8
now that isel handles chains more aggressively. This also
allows us to make isLegalToFold non-virtual.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97597 91177308-0d34-0410-b5e6-96231b3b80d8
CopyToReg/CopyFromReg/INLINEASM. These are annoying because
they have the same opcode before an after isel. Fix this by
setting their NodeID to -1 to indicate that they are selected,
just like what automatically happens when selecting things that
end up being machine nodes.
With that done, give IsLegalToFold a new flag that causes it to
ignore chains. This lets the HandleMergeInputChains routine be
the one place that validates chains after a match is successful,
enabling the new hotness in chain processing. This smarter
chain processing eliminates the need for "PreprocessRMW" in the
X86 and MSP430 backends and enables MSP to start matching it's
multiple mem operand instructions more aggressively.
I currently #if out the dead code in the X86 backend and MSP
backend, I'll remove it for real in a follow-on patch.
The testcase changes are:
test/CodeGen/X86/sse3.ll: we generate better code
test/CodeGen/X86/store_op_load_fold2.ll: PreprocessRMW was
miscompiling this before, we now generate correct code
Convert it to filecheck while I'm at it.
test/CodeGen/MSP430/Inst16mm.ll: Add a testcase for mem/mem
folding to make anton happy. :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97596 91177308-0d34-0410-b5e6-96231b3b80d8
was that we weren't properly handling the case when interior
nodes of a matched pattern become dead after updating chain
and flag uses. Now we handle this explicitly in
UpdateChainsAndFlags.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97561 91177308-0d34-0410-b5e6-96231b3b80d8
DoInstructionSelection. Inline "SelectRoot" into it from DAGISelHeader.
Sink some other stuff out of DAGISelHeader into SDISel.
Eliminate the various 'Indent' stuff from various targets, which dates
to when isel was recursive.
17 files changed, 114 insertions(+), 430 deletions(-)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97555 91177308-0d34-0410-b5e6-96231b3b80d8
stuff now that we don't care about emulating the old broken
behavior of the old isel. This eliminates the
'CheckChainCompatible' check (along with IsChainCompatible) which
did an incorrect and inefficient scan *up* the chain nodes which
happened as the pattern was being formed and does the validation
at the end in HandleMergeInputChains when it forms a structural
pattern. This scans "down" the graph, which means that it is
quickly bounded by nodes already selected. This also handles
token factors that get "trapped" in the dag.
Removing the CheckChainCompatible nodes also shrinks the
generated tables by about 6K for X86 (down to 83K).
There are two pieces remaining before I can nuke PreprocessRMW:
1. I xfailed a test because we're now producing worse code in a
case that has nothing to do with the change: it turns out that
our use of MorphNodeTo will leave dead nodes in the graph
which (depending on how the graph is walked) end up causing
bogus uses of chains and blocking matches. This is really
bad for other reasons, so I'll fix this in a follow-up patch.
2. CheckFoldableChainNode needs to be improved to handle the TF.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97539 91177308-0d34-0410-b5e6-96231b3b80d8
ComplexPattern at the root be generated multiple times, once
for each opcode they are part of. This encourages factoring
because the opcode checks get treated just like everything
else in the matcher.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97439 91177308-0d34-0410-b5e6-96231b3b80d8
to a scope where every child starts with a CheckOpcode, but
executes more efficiently. Enhance DAGISelMatcherOpt to
form it.
This also fixes a bug in CheckOpcode: apparently the SDNodeInfo
objects are not pointer comparable, we have to compare the
enum name.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97438 91177308-0d34-0410-b5e6-96231b3b80d8
(which gets #included into the middle of each
target's DAGISel class) into a .cpp file where it is
only compiled once.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97425 91177308-0d34-0410-b5e6-96231b3b80d8
specifies whether there is an output flag or not. Use this
instead of redundantly encoding the chain/flag results in the
output vtlist.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97419 91177308-0d34-0410-b5e6-96231b3b80d8
even some the old isel didn't. There are several parts of
this that make me feel dirty, but it's no worse than the
old isel. I'll clean up the parts I can do without ripping
out the old one next.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97415 91177308-0d34-0410-b5e6-96231b3b80d8
and restore the entire matcher stack by value. This is because children
we're testing could do moveparent or other things besides just
scribbling on additions to the stack.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97212 91177308-0d34-0410-b5e6-96231b3b80d8
instead of to have a chained series of scope nodes. This makes
the generated table smaller, improves the efficiency of the
interpreter, and make the factoring optimization much more
reasonable to implement.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97160 91177308-0d34-0410-b5e6-96231b3b80d8
reflect what it does. Switch the sense of the Next and the Check
arms to be more logical. No functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97093 91177308-0d34-0410-b5e6-96231b3b80d8
the new isel: fold movechild+record+moveparent into a
single recordchild N node. This shrinks the X86 table
from 125443 to 117502 bytes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97031 91177308-0d34-0410-b5e6-96231b3b80d8
necessary to swap the operands to handle NaN and negative zero properly.
Also, reintroduce logic for checking for NaN conditions when forming
SSE min and max instructions, fixed to take into consideration NaNs and
negative zeros. This allows forming min and max instructions in more
cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97025 91177308-0d34-0410-b5e6-96231b3b80d8
internal nodes with flag results. Record these with a new
OPC_MarkFlagResults opcode and use this to update the interior
nodes' flag results properly. This fixes CodeGen/X86/i256-add.ll
with the new isel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@97021 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, LiveIntervalAnalysis would infer phi joins by looking for multiply
defined registers. That doesn't work if the phi join is implicitly defined in
all but one of the predecessors.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96994 91177308-0d34-0410-b5e6-96231b3b80d8
ridiculously ginormous patterns and need more than one byte
of displacement for encodings. This fixes CellSPU/fdiv.ll.
SPU is still doing something else ridiculous though.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96833 91177308-0d34-0410-b5e6-96231b3b80d8
result nodes correctly. Note that this includes a horrible hack
in DAGISelHeader which cannot be fixed reasonably without
eliminating (parallel) from input patterns. That, in turn,
can't be done until we support writing multiple result patterns
for the X86and_flag and related multiple-result nodes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96767 91177308-0d34-0410-b5e6-96231b3b80d8
<4 x i32> with <4 x float> values if they end up the same
register class. This gets us up to 231 passes on the ppc
tests (only 7 fails).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96750 91177308-0d34-0410-b5e6-96231b3b80d8
of the matched pattern to use the newly created node results. Onto
the "making it actually work" phase!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96724 91177308-0d34-0410-b5e6-96231b3b80d8
the point where it is to the 95% feature complete mark, it just
needs result updating to be done (then testing, optimization
etc).
More specificallly, this adds support for chain and flag handling
on the result nodes, support for sdnodexforms, support for variadic
nodes, memrefs, pinned physreg inputs, and probably lots of other
stuff.
In the old DAGISelEmitter, this deletes the dead code related to
OperatorMap, cleans up a variety of dead stuff handling "implicit
remapping" from things like globaladdr -> targetglobaladdr (which
is no longer used because globaladdr always needs to be legalized),
and some minor formatting fixes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96716 91177308-0d34-0410-b5e6-96231b3b80d8
which is not always true if the mask contains undefs. Modified it to return
the first non undef value.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96621 91177308-0d34-0410-b5e6-96231b3b80d8
Moderate the weight given to very small intervals.
The spill weight given to new intervals created when spilling was not
normalized in the same way as the original spill weights calculated by
CalcSpillWeights. That meant that restored registers would tend to hang around
because they had a much higher spill weight that unspilled registers.
This improves the runtime of a few tests by up to 10%, and there are no
significant regressions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96613 91177308-0d34-0410-b5e6-96231b3b80d8
I'd like to eventually rip it out, but for now producing the
same selections as the old matcher is more important.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96458 91177308-0d34-0410-b5e6-96231b3b80d8
CheckComplexPattern function. Though it is logically const,
I don't have the fortitude to clean up all the targets now,
and it not being const doesn't block anything.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96426 91177308-0d34-0410-b5e6-96231b3b80d8
use and only call IsProfitableToFold/IsLegalToFold on the load
being folded, like the old dagiselemitter does. This
substantially simplifies the code and improves opportunities for
sharing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96368 91177308-0d34-0410-b5e6-96231b3b80d8
IsLegalToFold and IsProfitableToFold. The generic version of the later simply checks whether the folding candidate has a single use.
This allows the target isel routines more flexibility in deciding whether folding makes sense. The specific case we are interested in is folding constant pool loads with multiple uses.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96255 91177308-0d34-0410-b5e6-96231b3b80d8
produce a table based matcher instead of gobs of C++ Code.
Though it's not done yet, the shrinkage seems promising,
the table for the X86 ISel is 75K and still has a lot of
optimization to come (compare to the ~1.5M of .o generated
the old way, much of which will go away).
The code is currently disabled by default (the #if 0 in
DAGISelEmitter.cpp). When enabled it generates a dead
SelectCode2 function in the DAGISel Header which will
eventually replace SelectCode.
There is still a lot of stuff left to do, which are
documented with a trail of FIXMEs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96215 91177308-0d34-0410-b5e6-96231b3b80d8
created. This ensures it's updated at all time. It means targets which perform
dynamic stack alignment would know whether it is required and whether frame
pointer register cannot be made available register allocation.
This is a fix for rdar://7625239. Sorry, I can't create a reasonably sized test
case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96069 91177308-0d34-0410-b5e6-96231b3b80d8
reduce down to a single value. InstCombine already does this transformation
but DAG legalization may introduce new opportunities. This has turned out to
be important for ARM where 64-bit values are split up during type legalization:
InstCombine is not able to remove the PHI cycles on the 64-bit values but
the separate 32-bit values can be optimized. I measured the compile time
impact of this (running llc on 176.gcc) and it was not significant.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@95951 91177308-0d34-0410-b5e6-96231b3b80d8
The major win of this is that the code is simpler and they
print on the same line as the instruction again:
movl %eax, 96(%esp) ## 4-byte Spill
movl 96(%esp), %eax ## 4-byte Reload
cmpl 92(%esp), %eax ## 4-byte Folded Reload
jl LBB7_86
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@95738 91177308-0d34-0410-b5e6-96231b3b80d8
into TargetOpcodes.h. #include the new TargetOpcodes.h
into MachineInstr. Add new inline accessors (like isPHI())
to MachineInstr, and start using them throughout the
codebase.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@95687 91177308-0d34-0410-b5e6-96231b3b80d8
are from debug info. Add an iterator to MachineRegisterInfo
to skip Debug operands when walking the use list. No
functional change yet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@95473 91177308-0d34-0410-b5e6-96231b3b80d8
Instruction selection for X86 now can choose an instruction
sequence that will fit any address of any symbol, no matter
the pointer width. X86-64 uses a mov+call-via-reg sequence
for this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@95323 91177308-0d34-0410-b5e6-96231b3b80d8
mccontext instead of having AsmPrinter do it. This allows other
types of MCStreamer's to be passed in.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@95155 91177308-0d34-0410-b5e6-96231b3b80d8
"visit*" method is called, take the newly created nodes, walk them in a DFS
fashion, and if they don't have an ordering set, then give it one.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@94757 91177308-0d34-0410-b5e6-96231b3b80d8
This allows code gen and the exception table writer to cooperate to make sure
landing pads are associated with the correct invoke locations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@94726 91177308-0d34-0410-b5e6-96231b3b80d8
runOnMachineFunction, and switch PPC to use EmitFunctionBody.
The two ppc asmprinters now don't heave to define
runOnMachineFunction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@94722 91177308-0d34-0410-b5e6-96231b3b80d8
Move the X86 implementation of function body emission up to
AsmPrinter::EmitFunctionBody, which works by calling the virtual
EmitInstruction method.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@94716 91177308-0d34-0410-b5e6-96231b3b80d8
which allows targets to override function entry label emission.
Use it to convert linux/ppc to use EmitFunctionHeader().
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@94667 91177308-0d34-0410-b5e6-96231b3b80d8
which is more convenient, and change getPICJumpTableRelocBaseExpr
to take a MachineFunction to match.
Next, move the X86 code that create a PICBase symbol to
X86TargetLowering::getPICBaseSymbol from
X86MCInstLower::GetPICBaseSymbol, which was an asmprinter specific
library. This eliminates a 'gross hack', and allows us to
implement X86ISelLowering::getPICJumpTableRelocBaseExpr which now
calls it.
This in turn allows us to eliminate the
X86AsmPrinter::printPICJumpTableSetLabel method, which was the
only overload of printPICJumpTableSetLabel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@94526 91177308-0d34-0410-b5e6-96231b3b80d8
make it private and non-virtual. It handles the non-pic
case too, so just use it, simplifying EmitJumpTableInfo.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@94517 91177308-0d34-0410-b5e6-96231b3b80d8
MachineFunctionAnalysis dole them out, instead of having
AsmPrinter do both. Have the AsmPrinter::SetupMachineFunction
method set the 'AsmPrinter::MF' variable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@94509 91177308-0d34-0410-b5e6-96231b3b80d8
1. MachineJumpTableInfo is now created lazily for a function the first time
it actually makes a jump table instead of for every function.
2. The encoding of jump table entries is now described by the
MachineJumpTableInfo::JTEntryKind enum. This enum is determined by the
TLI::getJumpTableEncoding() hook, instead of by lots of code scattered
throughout the compiler that "knows" that jump table entries are always
32-bits in pic mode (for example).
3. The size and alignment of jump table entries is now calculated based on
their kind, instead of at machinefunction creation time.
Future work includes using the EntryKind in more places in the compiler,
eliminating other logic that "knows" the layout of jump tables in various
situations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@94470 91177308-0d34-0410-b5e6-96231b3b80d8
the '-pre-RA-sched' flag. It actually makes more sense to do it this way. Also,
keep track of the SDNode ordering by default. Eventually, we would like to make
this ordering a way to break a "tie" in the scheduler. However, doing that now
breaks the "CodeGen/X86/abi-isel.ll" test for 32-bit Linux.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@94308 91177308-0d34-0410-b5e6-96231b3b80d8
to MCExpr then emit them through MCStreamer with EmitValue. I think all
global variable initializers are now going through mcstreamer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@94293 91177308-0d34-0410-b5e6-96231b3b80d8
of int initializers), change some methods to be static functions,
use raw_ostream::write_hex instead of a smallstring dance with
APValue::toStringUnsigned(S, 16).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@93991 91177308-0d34-0410-b5e6-96231b3b80d8
function can support dynamic stack realignment. That's a much easier question
to answer at instruction selection stage than whether the function actually
will have dynamic alignment prologue. This allows the removal of the
stack alignment heuristic pass, and improves code quality for cases where
the heuristic would result in dynamic alignment code being generated when
it was not strictly necessary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@93885 91177308-0d34-0410-b5e6-96231b3b80d8
doing global variable classification anymore) and hookized, sink almost
all target targets global variable emission code into AsmPrinter and out
of each target.
Some notes:
1. PIC16 does completely custom and crazy stuff, so it is not changed.
2. XCore has some custom handling for extra directives. I'll look at it next.
3. This switches linux/ppc to use .globl instead of .global. If .globl is
actually wrong, let me know and I'll fix it.
4. This makes linux/ppc get a lot of random cases right which were obviously
wrong before, it is probably now a bit healthier.
5. Blackfin will probably start getting .comm and other things that it didn't
before. If this is undesirable, it should explicitly opt out of these
things by clearing the relevant fields of MCAsmInfo.
This leads to a nice diffstat:
14 files changed, 127 insertions(+), 830 deletions(-)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@93858 91177308-0d34-0410-b5e6-96231b3b80d8
This makes a similar code dead in all the other targets, I'll clean it up
in a bit.
This also moves handling of lcomm up before acquisition of a section,
since lcomm never needs a section.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@93851 91177308-0d34-0410-b5e6-96231b3b80d8
as it emits code. Switch .globl directives to use OutStreamer instead of
doing it textually (in x86)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@93700 91177308-0d34-0410-b5e6-96231b3b80d8
and add an explicit ForcePrivate argument.
Switch FunctionEHFrameInfo to be MCSymbol based instead of string based.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@93646 91177308-0d34-0410-b5e6-96231b3b80d8
replace it. Upgrade Alpha, Blackfin, and part of CellSPU to not
use mangler anymore. CellSPU needs more invasive surgery.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@93589 91177308-0d34-0410-b5e6-96231b3b80d8
print/dumpWithDepth allows one to dump a DAG up to N levels deep.
dump/printWithFullDepth prints the whole DAG, subject to a depth limit
on 100 in the default case (to prevent infinite recursion).
Have CannotYetSelect to a dumpWithFullDepth so it is clearer exactly
what the non-matching DAG looks like.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@93538 91177308-0d34-0410-b5e6-96231b3b80d8
Remove most of old Mach-O Writer support, it has been replaced by MCMachOStreamer
Further refactoring to completely remove MachOWriter and drive the object file
writer with the AsmPrinter MCInst/MCSection logic is forthcoming.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@93527 91177308-0d34-0410-b5e6-96231b3b80d8
For now, this pass is fairly conservative. It only perform the replacement when both the pre- and post- extension values are used in the block. It will miss cases where the post-extension values are live, but not used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@93278 91177308-0d34-0410-b5e6-96231b3b80d8
