This required changing how the computation of the ABI is handled
and how some of the checks for ABI/target are done.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229471 91177308-0d34-0410-b5e6-96231b3b80d8
Our register allocation has become better recently, it seems, and is now
starting to generate cross-block copies into inflated register classes. These
copies are not transformed into subregister insertions/extractions by the
PPCVSXCopy class, and so need to be handled directly by
PPCInstrInfo::copyPhysReg. The code to do this was *almost* there, but not
quite (it was unnecessarily restricting itself to only the direct
sub/super-register-class case (not copying between, for example, something in
VRRC and the lower-half of VSRC which are super-registers of F8RC).
Triggering this behavior manually is difficult; I'm including two
bugpoint-reduced test cases from the test suite.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229457 91177308-0d34-0410-b5e6-96231b3b80d8
SimplifyCFG now knows how to speculate calls to intrinsic cttz/ctlz that are
'cheap' for the target. Therefore, some of the logic in CodeGenPrepare
that was originally added at revision 224899 can now be removed.
This patch is basically a no functional change. It removes the duplicated
logic in CodeGenPrepare and converts all the existing target specific tests
for cttz/ctlz into SimplifyCFG tests.
Differential Revision: http://reviews.llvm.org/D7608
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229105 91177308-0d34-0410-b5e6-96231b3b80d8
The PowerPC backend has long promoted some floating-point vector operations
(such as select) to integer vector operations. Unfortunately, this behavior was
broken by r216555. When using FP_EXTEND/FP_ROUND for promotions, we must check
that both the old and new types are floating-point types. Otherwise, we must
use BITCAST as we did prior to r216555 for everything.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228969 91177308-0d34-0410-b5e6-96231b3b80d8
On PowerPC, which has a full set of logical operations on (its multiple sets
of) condition-register bits, it is not profitable to break of complex
conditions feeding a jump into multiple jumps. We can turn off this feature of
CGP/SDAGBuilder by marking jumps as "expensive".
P7 test-suite speedups (no regressions):
MultiSource/Benchmarks/FreeBench/pcompress2/pcompress2
-0.626647% +/- 0.323583%
MultiSource/Benchmarks/Olden/power/power
-18.2821% +/- 8.06481%
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228895 91177308-0d34-0410-b5e6-96231b3b80d8
See full discussion in http://reviews.llvm.org/D7491.
We now hide the add-immediate and call instructions together in a
separate pseudo-op, which is tagged to define GPR3 and clobber the
call-killed registers. The PPCTLSDynamicCall pass prior to RA now
expands this op into the two separate addi and call ops, with explicit
definitions of GPR3 on both instructions, and explicit clobbers on the
call instruction. The pass is now marked as requiring and preserving
the LiveIntervals and SlotIndexes analyses, and fixes these up after
the replacement sequences are introduced.
Self-hosting has been verified on LE P8 and BE P7 with various
optimization levels, etc. It has also been verified with the
--no-tls-optimize flag workaround removed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228725 91177308-0d34-0410-b5e6-96231b3b80d8
veqv (vector equivalence)
vnand
vorc
I increased the AddedComplexity for these instructions to 500 to ensure they are generated instead of issuing other VSX instructions.
Phabricator review: http://reviews.llvm.org/D7469
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228580 91177308-0d34-0410-b5e6-96231b3b80d8
If a loop predecessor has an invoke as its terminator, and the return value
from that invoke is used to determine the loop iteration space, then we can't
insert a computation based on that value in the loop predecessor prior to the
terminator (oops). If there's such an invoke, or just no predecessor for that
matter, insert a new loop preheader.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228488 91177308-0d34-0410-b5e6-96231b3b80d8
Unfortunately, even with the workaround of disabling the linker TLS
optimizations in Clang restored (which has already been done), this still
breaks self-hosting on my P7 machine (-O3 -DNDEBUG -mcpu=native).
Bill is currently working on an alternate implementation to address the TLS
issue in a way that also fully elides the linker bug (which, unfortunately,
this approach did not fully), so I'm reverting this now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228460 91177308-0d34-0410-b5e6-96231b3b80d8
PowerPC supports pre-increment load/store instructions (except for Altivec/VSX
vector load/stores). Using these on embedded cores can be very important, but
most loops are not naturally set up to use them. We can often change that,
however, by placing loops into a non-canonical form. Generically, this means
transforming loops like this:
for (int i = 0; i < n; ++i)
array[i] = c;
to look like this:
T *p = array[-1];
for (int i = 0; i < n; ++i)
*++p = c;
the key point is that addresses accessed are pulled into dedicated PHIs and
"pre-decremented" in the loop preheader. This allows the use of pre-increment
load/store instructions without loop peeling.
A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is
introduced to perform this transformation. I've used this code out-of-tree for
generating code for the PPC A2 for over a year. Somewhat to my surprise,
running the test suite + externals on a P7 with this transformation enabled
showed no performance regressions, and one speedup:
External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk
-2.32514% +/- 1.03736%
So I'm going to enable it on everything for now. I was surprised by this
because, on the POWER cores, these pre-increment load/store instructions are
cracked (and, thus, harder to schedule effectively). But seeing no regressions,
and feeling that it is generally easier to split instructions apart late than
it is to combine them late, this might be the better approach regardless.
In the future, we might want to integrate this functionality into LSR (but
currently LSR does not create new PHI nodes, so (for that and other reasons)
significant work would need to be done).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228328 91177308-0d34-0410-b5e6-96231b3b80d8
PowerPC supports pre-increment floating-point load/store instructions, both r+r
and r+i, and we had patterns for them, but they were not marked as legal. Mark
them as legal (and add a test case).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228327 91177308-0d34-0410-b5e6-96231b3b80d8
Patch by Kit Barton.
Add the vector count leading zeros instruction for byte, halfword,
word, and doubleword sizes. This is a fairly straightforward addition
after the changes made for vpopcnt:
1. Add the correct definitions for the various instructions in
PPCInstrAltivec.td
2. Make the CTLZ operation legal on vector types when using P8Altivec
in PPCISelLowering.cpp
Test Plan
Created new test case in test/CodeGen/PowerPC/vec_clz.ll to check the
instructions are being generated when the CTLZ operation is used in
LLVM.
Check the encoding and decoding in test/MC/PowerPC/ppc_encoding_vmx.s
and test/Disassembler/PowerPC/ppc_encoding_vmx.txt respectively.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228301 91177308-0d34-0410-b5e6-96231b3b80d8
This patch is a third attempt to properly handle the local-dynamic and
global-dynamic TLS models.
In my original implementation, calls to __tls_get_addr were hidden
from view until the asm-printer phase, at which point the underlying
branch-and-link instruction was created with proper relocations. This
mostly worked well, but I used some repellent techniques to ensure
that the TLS_GET_ADDR nodes at the SD and MI levels correctly received
input from GPR3 and produced output into GPR3. This proved to work
badly in the presence of multiple TLS variable accesses, with the
copies to and from GPR3 being scheduled incorrectly and generally
creating havoc.
In r221703, I addressed that problem by representing the calls to
__tls_get_addr as true calls during instruction lowering. This had
the advantage of removing all of the bad hacks and relying on the
existing call machinery to properly glue the copies in place. It
looked like this was going to be the right way to go.
However, as a side effect of the recent discovery of problems with
linker optimizations for TLS, we discovered cases of suboptimal code
generation with this strategy. The problem comes when tls_get_addr is
called for the same address, and there is a resulting CSE
opportunity. It turns out that in such cases MachineCSE will common
the addis/addi instructions that set up the input value to
tls_get_addr, but will not common the calls themselves. MachineCSE
does not have any machinery to common idempotent calls. This is
perfectly sensible, since presumably this would be done at the IR
level, and introducing calls in the back end isn't commonplace. In
any case, we end up with two calls to __tls_get_addr when one would
suffice, and that isn't good.
I presumed that the original design would have allowed commoning of
the machine-specific nodes that hid the __tls_get_addr calls, so as
suggested by Ulrich Weigand, I went back to that design and cleaned it
up so that the copies were properly held together by glue
nodes. However, it turned out that this didn't work either...the
presence of copies to physical registers kept the machine-specific
nodes from being commoned also.
All of which leads to the design presented here. This is a return to
the original design, except that no attempt is made to introduce
copies to and from GPR3 during instruction lowering. Virtual registers
are used until prior to register allocation. At that point, a special
pass is run that identifies the machine-specific nodes that hide the
tls_get_addr calls and introduces the copies to and from GPR3 around
them. The register allocator then coalesces these copies away. With
this design, MachineCSE succeeds in commoning tls_get_addr calls where
possible, and we get nice optimal code generation (better than GCC at
the moment, which does not common these calls).
One additional problem must be dealt with: After introducing the
mentions of the physical register GPR3, the aggressive anti-dependence
breaker sees opportunities to improve scheduling by selecting a
different register instead. Flags must be used on the instruction
descriptions to tell the anti-dependence breaker to keep its hands in
its pockets.
One thing missing from the original design was recording a definition
of the link register on the GET_TLS_ADDR nodes. Doing this was found
to be insufficient to force a stack frame to be created, which led to
looping behavior because two different LR values were stored at the
same address. This appears to have been an oversight in
PPCFrameLowering::determineFrameLayout(), which is repaired here.
Because MustSaveLR() returns true for calls to builtin_return_address,
this changed the expected behavior of
test/CodeGen/PowerPC/retaddr2.ll, which now stacks a frame but
formerly did not. I've fixed the test case to reflect this.
There are existing TLS tests to catch regressions; the checks in
test/CodeGen/PowerPC/tls-store2.ll proved to be too restrictive in the
face of instruction scheduling with these changes, so I fixed that
up.
I've added a new test case based on the PrettyStackTrace module that
demonstrated the original problem. This checks that we get correct
code generation and that CSE of the calls to __get_tls_addr has taken
place.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227976 91177308-0d34-0410-b5e6-96231b3b80d8
The VSX store instructions were also picking up an implicit "may read" from the
default pattern, which was an intrinsic (and we don't currently have a way of
specifying write-only intrinsics).
This was causing MI verification to fail for VSX spill restores.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227759 91177308-0d34-0410-b5e6-96231b3b80d8
isel is actually a cracked instruction on the P7/P8, and must start a dispatch
group. The scheduling model should reflect this so that we don't bunch too many
of them together when possible.
Thanks to Bill Schmidt and Pat Haugen for helping to sort this out.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227758 91177308-0d34-0410-b5e6-96231b3b80d8
The TOC base pointer is passed in r2, and we normally reserve this register so
that we can depend on it being there. However, for leaf functions, and
specifically those leaf functions that don't do any TOC access of their own
(which is generally due to accessing the constant pool, using TLS, etc.),
we can treat r2 as an ordinary callee-saved register (it must be callee-saved
because, for local direct calls, the linker will not insert any save/restore
code).
The allocation order has been changed slightly for PPC64/ELF systems to put r2
at the end of the list (while leaving it near the beginning for Darwin systems
to prevent unnecessary output changes). While r2 is allocatable, using it still
requires spill/restore traffic, and thus comes at the end of the list.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227745 91177308-0d34-0410-b5e6-96231b3b80d8
Patch by Nemanja Ivanovic.
As was uncovered by the failing test case (when run on non-PPC
platforms), the feature set when compiling with -march=ppc64le was not
being picked up. This change ensures that if the -mcpu option is not
specified, the correct feature set is picked up regardless of whether
we are on PPC or not.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227455 91177308-0d34-0410-b5e6-96231b3b80d8
It appears we have different behavior with and without -mcpu=pwr8 even
with ppc64le defaulting to POWER8. The failure appears as follows:
/home/bb/cmake-llvm-x86_64-linux/llvm-project/llvm/test/CodeGen/PowerPC/ppc64le-aggregates.ll:268:14: error: expected string not found in input
; CHECK-DAG: lfs 1, 0([[REG]])
^
<stdin>:497:11: note: scanning from here
ld 3, .LC1@toc@l(3)
^
<stdin>:497:11: note: with variable "REG" equal to "3"
ld 3, .LC1@toc@l(3)
^
<stdin>:514:2: note: possible intended match here
lfs 1, 0(4)
^
Reverting this particular test case change. Nemanja, please have a look
at the reason for the failure.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227055 91177308-0d34-0410-b5e6-96231b3b80d8
Test by Nemanja Ivanovic.
Since ppc64le implies POWER8 as a minimum, it makes sense that the
same features are included. Since the pwr8 processor model will likely
be getting new features until the implementation is complete, I
created a new list to add these updates to. This will include them in
both pwr8 and ppc64le.
Furthermore, it seems that it would make sense to compose the feature
lists for other processor models (pwr3 and up). Per discussion in the
review, I will make this change in a subsequent patch.
In order to test the changes, I've added an additional run step to
test cases that specify -march=ppc64le -mcpu=pwr8 to omit the -mcpu
option. Since the feature lists are the same, the behaviour should be
unchanged.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227053 91177308-0d34-0410-b5e6-96231b3b80d8
Our PPC64 ELF V2 call lowering logic added r2 as an operand to all direct call
instructions in order to represent the dependency on the TOC base pointer
value. Restricting this to ELF V2, however, does not seem to make sense: calls
under ELF V1 have the same dependence, and indirect calls have an r2 dependence
just as direct ones. Make sure the dependence is noted for all calls under both
ELF V1 and ELF V2.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226432 91177308-0d34-0410-b5e6-96231b3b80d8
The default calling convention specified by the PPC64 ELF (V1 and V2) ABI is
designed to work with both prototyped and non-prototyped/varargs functions. As
a result, GPRs and stack space are allocated for every argument, even those
that are passed in floating-point or vector registers.
GlobalOpt::OptimizeFunctions will transform local non-varargs functions (that
do not have their address taken) to use the 'fast' calling convention.
When functions are using the 'fast' calling convention, don't allocate GPRs for
arguments passed in other types of registers, and don't allocate stack space for
arguments passed in registers. Other changes for the fast calling convention
may be added in the future.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226399 91177308-0d34-0410-b5e6-96231b3b80d8
R11's status is the same under both the PPC64 ELF V1 and V2 ABIs: it is
reserved for use as an "environment pointer" for compilation models that
require such a thing. We don't, we also don't need a second scratch register,
and because we support only "local" patchpoint call targets, we might as well
let R11 be used for anyregcc patchpoints.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226369 91177308-0d34-0410-b5e6-96231b3b80d8
Bill Schmidt pointed out that some adjustments would be needed to properly
support powerpc64le (using the ELF V2 ABI). For one thing, R11 is not available
as a scratch register, so we need to use R12. R12 is also available under ELF
V1, so to maintain consistency, I flipped the order to make R12 the first
scratch register in the array under both ABIs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226247 91177308-0d34-0410-b5e6-96231b3b80d8
Function pointers under PPC64 ELFv1 (which is used on PPC64/Linux on the
POWER7, A2 and earlier cores) are really pointers to a function descriptor, a
structure with three pointers: the actual pointer to the code to which to jump,
the pointer to the TOC needed by the callee, and an environment pointer. We
used to chain these loads, and make them opaque to the rest of the optimizer,
so that they'd always occur directly before the call. This is not necessary,
and in fact, highly suboptimal on embedded cores. Once the function pointer is
known, the loads can be performed ahead of time; in fact, they can be hoisted
out of loops.
Now these function descriptors are almost always generated by the linker, and
thus the contents of the descriptors are invariant. As a result, by default,
we'll mark the associated loads as invariant (allowing them to be hoisted out
of loops). I've added a target feature to turn this off, however, just in case
someone needs that option (constructing an on-stack descriptor, casting it to a
function pointer, and then calling it cannot be well-defined C/C++ code, but I
can imagine some JIT-compilation system doing so).
Consider this simple test:
$ cat call.c
typedef void (*fp)();
void bar(fp x) {
for (int i = 0; i < 1600000000; ++i)
x();
}
$ cat main.c
typedef void (*fp)();
void bar(fp x);
void foo() {}
int main() {
bar(foo);
}
On the PPC A2 (the BG/Q supercomputer), marking the function-descriptor loads
as invariant brings the execution time down to ~8 seconds from ~32 seconds with
the loads in the loop.
The difference on the POWER7 is smaller. Compiling with:
gcc -std=c99 -O3 -mcpu=native call.c main.c : ~6 seconds [this is 4.8.2]
clang -O3 -mcpu=native call.c main.c : ~5.3 seconds
clang -O3 -mcpu=native call.c main.c -mno-invariant-function-descriptors : ~4 seconds
(looks like we'd benefit from additional loop unrolling here, as a first
guess, because this is faster with the extra loads)
The -mno-invariant-function-descriptors will be added to Clang shortly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226207 91177308-0d34-0410-b5e6-96231b3b80d8
This commit moves `MDLocation`, finishing off PR21433. There's an
accompanying clang commit for frontend testcases. I'll attach the
testcase upgrade script I used to PR21433 to help out-of-tree
frontends/backends.
This changes the schema for `DebugLoc` and `DILocation` from:
!{i32 3, i32 7, !7, !8}
to:
!MDLocation(line: 3, column: 7, scope: !7, inlinedAt: !8)
Note that empty fields (line/column: 0 and inlinedAt: null) don't get
printed by the assembly writer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226048 91177308-0d34-0410-b5e6-96231b3b80d8
Patch by Kit Barton.
Support for the ICBT instruction is currently present, but limited to
embedded processors. This change adds a new FeatureICBT that can be used
to identify whether the ICBT instruction is available on a specific processor.
Two new tests are added:
* Positive test to ensure the icbt instruction is present when using
-mcpu=pwr8
* Negative test to ensure the icbt instruction is not generated when
using -mcpu=pwr7
Both test cases use the Prefetch opcode in LLVM. They are based on the
ppc64-prefetch.ll test case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226033 91177308-0d34-0410-b5e6-96231b3b80d8
The form of nops used is CPU-specific (some CPUs, such as the POWER7, have
special group-terminating nops). We probably want a different callback for this
kind of nop insertion (something more like MCAsmBackend::writeNopData), or for
PPC to use a different mechanism for scheduling nops, but this will stop the
test from failing for now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225928 91177308-0d34-0410-b5e6-96231b3b80d8
This re-applies r225808, fixed to avoid problems with SDAG dependencies along
with the preceding fix to ScheduleDAGSDNodes::RegDefIter::InitNodeNumDefs.
These problems caused the original regression tests to assert/segfault on many
(but not all) systems.
Original commit message:
This commit does two things:
1. Refactors PPCFastISel to use more of the common infrastructure for call
lowering (this lets us take advantage of this common code for lowering some
common intrinsics, stackmap/patchpoint among them).
2. Adds support for stackmap/patchpoint lowering. For the most part, this is
very similar to the support in the AArch64 target, with the obvious differences
(different registers, NOP instructions, etc.). The test cases are adapted
from the AArch64 test cases.
One difference of note is that the patchpoint call sequence takes 24 bytes, so
you can't use less than that (on AArch64 you can go down to 16). Also, as noted
in the docs, we take the patchpoint address to be the actual code address
(assuming the call is local in the TOC-sharing sense), which should yield
higher performance than generating the full cross-DSO indirect-call sequence
and is likely just as useful for JITed code (if not, we'll change it).
StackMaps and Patchpoints are still marked as experimental, and so this support
is doubly experimental. So go ahead and experiment!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225909 91177308-0d34-0410-b5e6-96231b3b80d8
A pass that adds random noops to X86 binaries to introduce diversity with the goal of increasing security against most return-oriented programming attacks.
Command line options:
-noop-insertion // Enable noop insertion.
-noop-insertion-percentage=X // X% of assembly instructions will have a noop prepended (default: 50%, requires -noop-insertion)
-max-noops-per-instruction=X // Randomly generate X noops per instruction. ie. roll the dice X times with probability set above (default: 1). This doesn't guarantee X noop instructions.
In addition, the following 'quick switch' in clang enables basic diversity using default settings (currently: noop insertion and schedule randomization; it is intended to be extended in the future).
-fdiversify
This is the llvm part of the patch.
clang part: D3393
http://reviews.llvm.org/D3392
Patch by Stephen Crane (@rinon)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225908 91177308-0d34-0410-b5e6-96231b3b80d8
This was already done in clang, this commit now uses the integrated
assembler as default when using LLVM tools directly.
A number of test cases using inline asm had to be adapted, either by
updating the expected output, or by using -no-integrated-as (for such
tests that deliberately use an invalid instruction in inline asm).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225819 91177308-0d34-0410-b5e6-96231b3b80d8
Reverting this while I investiage buildbot failures (segfaulting in
GetCostForDef at ScheduleDAGRRList.cpp:314).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225811 91177308-0d34-0410-b5e6-96231b3b80d8
This commit does two things:
1. Refactors PPCFastISel to use more of the common infrastructure for call
lowering (this lets us take advantage of this common code for lowering some
common intrinsics, stackmap/patchpoint among them).
2. Adds support for stackmap/patchpoint lowering. For the most part, this is
very similar to the support in the AArch64 target, with the obvious differences
(different registers, NOP instructions, etc.). The test cases are adapted
from the AArch64 test cases.
One difference of note is that the patchpoint call sequence takes 24 bytes, so
you can't use less than that (on AArch64 you can go down to 16). Also, as noted
in the docs, we take the patchpoint address to be the actual code address
(assuming the call is local in the TOC-sharing sense), which should yield
higher performance than generating the full cross-DSO indirect-call sequence
and is likely just as useful for JITed code (if not, we'll change it).
StackMaps and Patchpoints are still marked as experimental, and so this support
is doubly experimental. So go ahead and experiment!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225808 91177308-0d34-0410-b5e6-96231b3b80d8
Looking at r225438 inspired me to see how the PowerPC backend handled the
situation (calling a bitcasted TLS global), and it turns out we also produced
an error (cannot select ...). What it means to "call" something that is not a
function is implementation and platform specific, but in the name of doing
something (besides crashing), this makes sure we do what GCC does (treat all
such calls as calls through a function pointer -- meaning that the pointer is
assumed, as is the convention on PPC, to point to a function descriptor
structure holding the actual code address along with the function's TOC pointer
and environment pointer). As GCC does, we now do the same for calling regular
(non-TLS) non-function globals too.
I'm not sure whether this is the most useful way to define the behavior, but at
least we won't be alone.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225617 91177308-0d34-0410-b5e6-96231b3b80d8
This initial implementation of PPCTargetLowering::isZExtFree marks as free
zexts of small scalar loads (that are not sign-extending). This callback is
used by SelectionDAGBuilder's RegsForValue::getCopyToRegs, and thus to
determine whether a zext or an anyext is used to lower illegally-typed PHIs.
Because later truncates of zero-extended values are nops, this allows for the
elimination of later unnecessary truncations.
Fixes the initial complaint associated with PR22120.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225584 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
In the previous commit, the register was saved, but space was not allocated.
This resulted in the parameter save area potentially clobbering r30, leading to
nasty results.
Test Plan: Tests updated
Reviewers: hfinkel
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6906
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225573 91177308-0d34-0410-b5e6-96231b3b80d8
On modern cores with lfiw[az]x, we can fold a sign or zero extension from i32
to i64 into the load necessary for an i64 -> fp conversion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225493 91177308-0d34-0410-b5e6-96231b3b80d8
MachineLICM uses a callback named hasLowDefLatency to determine if an
instruction def operand has a 'low' latency. If all relevant operands have a
'low' latency, the instruction is considered too cheap to hoist out of loops
even in low-register-pressure situations. On PowerPC cores, both the embedded
cores and the others, there is no reason to believe that this is a good choice:
all instructions have a cost inside a loop, and hoisting them when not limited
by register pressure is a reasonable default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225471 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: The PIC additions didn't update the prologue and epilogue code to save and restore r30 (PIC base register). This does that.
Test Plan: Tests updated.
Reviewers: hfinkel
Reviewed By: hfinkel
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6876
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225450 91177308-0d34-0410-b5e6-96231b3b80d8
int->fp conversions on PPC must be done through memory loads and stores. On a
modern core, this process begins by storing the int value to memory, then
loading it using a (sometimes special) FP load instruction. Unfortunately, we
would do this even when the value to be converted was itself a load, and we can
just use that same memory location instead of copying it to another first.
There is a slight complication when handling int_to_fp(fp_to_int(x)) pairs,
because the fp_to_int operand has not been lowered when the int_to_fp is being
lowered. We handle this specially by invoking fp_to_int's lowering logic
(partially) and getting the necessary memory location (some trivial refactoring
was done to make this possible).
This is all somewhat ugly, and it would be nice if some later CodeGen stage
could just clean this stuff up, but because doing so would involve modifying
target-specific nodes (or instructions), it is not immediately clear how that
would work.
Also, remove a related entry from the README.txt for which we now generate
reasonable code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225301 91177308-0d34-0410-b5e6-96231b3b80d8
