Commit Graph

25773 Commits

Author SHA1 Message Date
Chris Lattner
7a2144b060 remove a dead proto
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29505 91177308-0d34-0410-b5e6-96231b3b80d8
2006-08-03 18:51:04 +00:00
Jim Laskey
6b59a36564 Get darwin intel debugging up and running.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29504 91177308-0d34-0410-b5e6-96231b3b80d8
2006-08-03 17:27:09 +00:00
Devang Patel
30f63adef8 Make it fit into 80-columns.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29503 91177308-0d34-0410-b5e6-96231b3b80d8
2006-08-03 17:26:30 +00:00
Devang Patel
94a0ac9bea Fix typo.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29502 91177308-0d34-0410-b5e6-96231b3b80d8
2006-08-03 17:25:36 +00:00
Devang Patel
f5a156deee Simplify. Use addprefix.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29501 91177308-0d34-0410-b5e6-96231b3b80d8
2006-08-03 17:18:45 +00:00
Rafael Espindola
f4fda80403 add and use ARMISD::RET_FLAG
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29499 91177308-0d34-0410-b5e6-96231b3b80d8
2006-08-03 17:02:20 +00:00
Chris Lattner
202ae321f8 Now that SparcV9 is gone, this logical can be simplified significantly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29498 91177308-0d34-0410-b5e6-96231b3b80d8
2006-08-03 16:59:17 +00:00
Devang Patel
a5eee6e586 Fix typo.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29497 91177308-0d34-0410-b5e6-96231b3b80d8
2006-08-03 16:34:35 +00:00
Patrick Jenkins
69d3a95b17 One of the directories we were searching in for .o and .a files was wrong. We now search /lib instead of /libs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29496 91177308-0d34-0410-b5e6-96231b3b80d8
2006-08-03 16:28:58 +00:00
Devang Patel
bbd1cb43f9 Remove ARM for the moment since it is a work in progress.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29495 91177308-0d34-0410-b5e6-96231b3b80d8
2006-08-03 16:14:09 +00:00
Devang Patel
a89d47f54d Add new tool, lto, to do link time optimization. This tool installs
dynamic library that linker can use to optimize llvm byte codes at
link time.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29494 91177308-0d34-0410-b5e6-96231b3b80d8
2006-08-03 15:44:57 +00:00
Chris Lattner
7e79b3898d Changes:
1. Update an obsolete comment.
  2. Make the sorting by base an explicit (though still N^2) step, so
     that the code is more clear on what it is doing.
  3. Partition uses so that uses inside the loop are handled before uses
     outside the loop.

Note that none of these changes currently changes the code inserted by LSR,
but they are a stepping stone to getting there.

This code is the result of some crazy pair programming with Nate. :)


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29493 91177308-0d34-0410-b5e6-96231b3b80d8
2006-08-03 06:34:50 +00:00
Chris Lattner
58d63567ea Remove some extraneous newlines.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29492 91177308-0d34-0410-b5e6-96231b3b80d8
2006-08-03 00:42:26 +00:00
Chris Lattner
32501a0e33 Really add support for compilers without noinline
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29491 91177308-0d34-0410-b5e6-96231b3b80d8
2006-08-03 00:26:13 +00:00
Chris Lattner
3700f90c19 Work around a GCC 3.3.5 bug noticed by a user.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29490 91177308-0d34-0410-b5e6-96231b3b80d8
2006-08-03 00:18:59 +00:00
Chris Lattner
8653b37ab9 Work around a bug in gcc 3.3.5, reported by a user
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29489 91177308-0d34-0410-b5e6-96231b3b80d8
2006-08-03 00:16:56 +00:00
Patrick Jenkins
59a2798a32 We now only search the following directories for .o and .a files:
utils/
libs/
tools/
Release/ & Debug/
as per Chris.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29488 91177308-0d34-0410-b5e6-96231b3b80d8
2006-08-02 23:48:07 +00:00
Evan Cheng
4876dc5b13 Reflect change to AssignTopologicalOrder().
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29480 91177308-0d34-0410-b5e6-96231b3b80d8
2006-08-02 22:01:32 +00:00
Evan Cheng
c384d6c398 - Change AssignTopologicalOrder to return vector of SDNode* by reference.
- Tweak implementation to avoid using std::map.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29479 91177308-0d34-0410-b5e6-96231b3b80d8
2006-08-02 22:00:34 +00:00
Evan Cheng
09fd736058 AssignTopologicalOrder now returns the vector of SDNode* by reference to
avoid the expensive operation of copying a vector.
It also returns a maximum id by value.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29478 91177308-0d34-0410-b5e6-96231b3b80d8
2006-08-02 21:58:44 +00:00
Jim Laskey
abe0e3e641 If the Program name was NULL then all further output sent to std::cerr was
suppressed.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29477 91177308-0d34-0410-b5e6-96231b3b80d8
2006-08-02 20:15:56 +00:00
Patrick Jenkins
d7210f9dba Removed some dead code and hopefully fixed the issue where the total list of tests was not being sent
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29476 91177308-0d34-0410-b5e6-96231b3b80d8
2006-08-02 18:37:40 +00:00
Jim Laskey
eb577ba3b8 Final polish on machine pass registries.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29471 91177308-0d34-0410-b5e6-96231b3b80d8
2006-08-02 12:30:23 +00:00
Jim Laskey
9b9528d8f6 Breaking out specialized classes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29470 91177308-0d34-0410-b5e6-96231b3b80d8
2006-08-02 12:27:50 +00:00
Evan Cheng
686c4a18f1 Use of vector<bool> causes some horrendous compile time regression (2x)!
Looks like libstdc++ implementation does not scale very well. Switch back
to using directly managed arrays.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29469 91177308-0d34-0410-b5e6-96231b3b80d8
2006-08-02 09:18:33 +00:00
Nate Begeman
83a6d49102 Update the readme to remove duplicate information and clarify the loop
problem.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29468 91177308-0d34-0410-b5e6-96231b3b80d8
2006-08-02 05:31:20 +00:00
Nate Begeman
8f74680c78 Disable LSR at -fast
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29467 91177308-0d34-0410-b5e6-96231b3b80d8
2006-08-02 05:29:40 +00:00
Chris Lattner
f9ba401bf5 Add special check to avoid isLoop call. Simple, but doesn't seem to speed
up lcssa much in practice.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29465 91177308-0d34-0410-b5e6-96231b3b80d8
2006-08-02 00:16:47 +00:00
Chris Lattner
880ddb018a Speed up Loop::isLCSSAForm by using a binary search and single-entry cache.
This reduces LCSSA pass time from 1.5s to 0.96s when run on eon in release+asserts mode.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29464 91177308-0d34-0410-b5e6-96231b3b80d8
2006-08-02 00:14:16 +00:00
Chris Lattner
d41ae8bc0c Replace the SSA update code in LCSSA with a bottom-up approach instead of a top
down approach, inspired by discussions with Tanya.

This approach is significantly faster, because it does not need dominator
frontiers and it does not insert extraneous unused PHI nodes.  For example, on
252.eon, in a release-asserts build, this speeds up LCSSA (which is the slowest
pass in gccas) from 9.14s to 0.74s on my G5.  This code is also slightly smaller
and significantly simpler than the old code.

Amusingly, in a normal Release build (which includes the
"assert(L->isLCSSAForm());" assertion), asserting that the result of LCSSA
is in LCSSA form is actually slower than the LCSSA transformation pass
itself on 252.eon.  I will see if Loop::isLCSSAForm can be sped up next.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29463 91177308-0d34-0410-b5e6-96231b3b80d8
2006-08-02 00:06:09 +00:00
Chris Lattner
d3a680ae2c Fix the build on case-sensitive filesystems :(
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29457 91177308-0d34-0410-b5e6-96231b3b80d8
2006-08-01 22:34:35 +00:00
Chris Lattner
6aba48338f Add dominates/properlyDominates queries to IDom.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29456 91177308-0d34-0410-b5e6-96231b3b80d8
2006-08-01 22:24:47 +00:00
Jim Laskey
9373beba60 Now that the ISel is available, it's possible to create a default instruction
scheduler creator.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29452 91177308-0d34-0410-b5e6-96231b3b80d8
2006-08-01 19:14:14 +00:00
Rafael Espindola
1ed3af11b5 start comments with #
move the constant pool to .text
correctly print loads of labels
mark R0, R1, R2 and R3 as caller save


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29451 91177308-0d34-0410-b5e6-96231b3b80d8
2006-08-01 18:53:10 +00:00
Jim Laskey
9ff542f2cc 1. Change use of "Cache" to "Default".
2. Added argument to instruction scheduler creators so the creators can do
special things.
3. Repaired target hazard code.
4. Misc.

More to follow.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29450 91177308-0d34-0410-b5e6-96231b3b80d8
2006-08-01 18:29:48 +00:00
Chris Lattner
2f2d32437a no need to check readability here
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29449 91177308-0d34-0410-b5e6-96231b3b80d8
2006-08-01 18:22:21 +00:00
Chris Lattner
0d167276dd Remove some now-dead methods. Use getFileStatus instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29447 91177308-0d34-0410-b5e6-96231b3b80d8
2006-08-01 18:16:02 +00:00
Chris Lattner
33b0e9c644 No need to check isWriteable here (which isn't sufficient anyway). Just attempt
to do the operation and if it fails, oh well.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29446 91177308-0d34-0410-b5e6-96231b3b80d8
2006-08-01 18:12:29 +00:00
Chris Lattner
8bdbb04f9b Use Path::getFileStatus
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29445 91177308-0d34-0410-b5e6-96231b3b80d8
2006-08-01 18:09:46 +00:00
Chris Lattner
0b32d8b764 Use Path::getFileStatus to get status-related info.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29444 91177308-0d34-0410-b5e6-96231b3b80d8
2006-08-01 18:04:01 +00:00
Chris Lattner
8961501c9b Use getFileStatus instead of Path::isDirectory().
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29443 91177308-0d34-0410-b5e6-96231b3b80d8
2006-08-01 17:59:14 +00:00
Chris Lattner
c7c453a845 elimiante some syscalls
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29442 91177308-0d34-0410-b5e6-96231b3b80d8
2006-08-01 17:51:09 +00:00
Reid Spencer
3336aa056f Update my entry.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29438 91177308-0d34-0410-b5e6-96231b3b80d8
2006-08-01 16:52:07 +00:00
Chris Lattner
936ef2fdb9 Update Bil's entry
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29437 91177308-0d34-0410-b5e6-96231b3b80d8
2006-08-01 16:40:42 +00:00
Jim Laskey
c6a0a117a6 Forgot the added files for plugable machine passes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29436 91177308-0d34-0410-b5e6-96231b3b80d8
2006-08-01 16:31:08 +00:00
Reid Spencer
704e81f6e8 Fix HTML 4.01 Strict errors.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29435 91177308-0d34-0410-b5e6-96231b3b80d8
2006-08-01 16:23:54 +00:00
Jim Laskey
13ec702c43 Introducing plugable register allocators and instruction schedulers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29434 91177308-0d34-0410-b5e6-96231b3b80d8
2006-08-01 14:21:23 +00:00
Rafael Espindola
06c1e7eacb implement LowerConstantPool and LowerGlobalAddress
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29433 91177308-0d34-0410-b5e6-96231b3b80d8
2006-08-01 12:58:43 +00:00
Jim Laskey
abf41f2e0a Adding to credibility.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29432 91177308-0d34-0410-b5e6-96231b3b80d8
2006-08-01 09:01:40 +00:00
Evan Cheng
e6f35d8a5c Added AssignTopologicalOrder() to assign each node an unique id based on their topological order.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29431 91177308-0d34-0410-b5e6-96231b3b80d8
2006-08-01 08:20:41 +00:00