SimplifyDemandedBits. The idea is that some operations can be simplified if
not all of the computed elements are needed. Some targets (like x86) have a
large number of intrinsics that operate on a single element, but pass other
elts through unmodified. If those other elements are not needed, the
intrinsics can be simplified to scalar operations, and insertelement ops can
be removed.
This turns (f.e.):
ushort %Convert_sse(float %f) {
%tmp = insertelement <4 x float> undef, float %f, uint 0 ; <<4 x float>> [#uses=1]
%tmp10 = insertelement <4 x float> %tmp, float 0.000000e+00, uint 1 ; <<4 x float>> [#uses=1]
%tmp11 = insertelement <4 x float> %tmp10, float 0.000000e+00, uint 2 ; <<4 x float>> [#uses=1]
%tmp12 = insertelement <4 x float> %tmp11, float 0.000000e+00, uint 3 ; <<4 x float>> [#uses=1]
%tmp28 = tail call <4 x float> %llvm.x86.sse.sub.ss( <4 x float> %tmp12, <4 x float> < float 1.000000e+00, float 0.000000e+00, float 0.000000e+00, float 0.000000e+00 > ) ; <<4 x float>> [#uses=1]
%tmp37 = tail call <4 x float> %llvm.x86.sse.mul.ss( <4 x float> %tmp28, <4 x float> < float 5.000000e-01, float 0.000000e+00, float 0.000000e+00, float 0.000000e+00 > ) ; <<4 x float>> [#uses=1]
%tmp48 = tail call <4 x float> %llvm.x86.sse.min.ss( <4 x float> %tmp37, <4 x float> < float 6.553500e+04, float 0.000000e+00, float 0.000000e+00, float 0.000000e+00 > ) ; <<4 x float>> [#uses=1]
%tmp59 = tail call <4 x float> %llvm.x86.sse.max.ss( <4 x float> %tmp48, <4 x float> zeroinitializer ) ; <<4 x float>> [#uses=1]
%tmp = tail call int %llvm.x86.sse.cvttss2si( <4 x float> %tmp59 ) ; <int> [#uses=1]
%tmp69 = cast int %tmp to ushort ; <ushort> [#uses=1]
ret ushort %tmp69
}
into:
ushort %Convert_sse(float %f) {
entry:
%tmp28 = sub float %f, 1.000000e+00 ; <float> [#uses=1]
%tmp37 = mul float %tmp28, 5.000000e-01 ; <float> [#uses=1]
%tmp375 = insertelement <4 x float> undef, float %tmp37, uint 0 ; <<4 x float>> [#uses=1]
%tmp48 = tail call <4 x float> %llvm.x86.sse.min.ss( <4 x float> %tmp375, <4 x float> < float 6.553500e+04, float undef, float undef, float undef > ) ; <<4 x float>> [#uses=1]
%tmp59 = tail call <4 x float> %llvm.x86.sse.max.ss( <4 x float> %tmp48, <4 x float> < float 0.000000e+00, float undef, float undef, float undef > ) ; <<4 x float>> [#uses=1]
%tmp = tail call int %llvm.x86.sse.cvttss2si( <4 x float> %tmp59 ) ; <int> [#uses=1]
%tmp69 = cast int %tmp to ushort ; <ushort> [#uses=1]
ret ushort %tmp69
}
which improves codegen from:
_Convert_sse:
movss LCPI1_0, %xmm0
movss 4(%esp), %xmm1
subss %xmm0, %xmm1
movss LCPI1_1, %xmm0
mulss %xmm0, %xmm1
movss LCPI1_2, %xmm0
minss %xmm0, %xmm1
xorps %xmm0, %xmm0
maxss %xmm0, %xmm1
cvttss2si %xmm1, %eax
andl $65535, %eax
ret
to:
_Convert_sse:
movss 4(%esp), %xmm0
subss LCPI1_0, %xmm0
mulss LCPI1_1, %xmm0
movss LCPI1_2, %xmm1
minss %xmm1, %xmm0
xorps %xmm1, %xmm1
maxss %xmm1, %xmm0
cvttss2si %xmm0, %eax
andl $65535, %eax
ret
This is just a first step, it can be extended in many ways. Testcase here:
Transforms/InstCombine/vec_demanded_elts.ll
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@30752 91177308-0d34-0410-b5e6-96231b3b80d8
Ensure that we copy KnownProperties before calling visitBasicBlock, else
we may leak properties into blocks where they don't belong.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@30705 91177308-0d34-0410-b5e6-96231b3b80d8
The critical edge block dominates the dest block if the destblock dominates
all edges other than the one incoming from the critical edge.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@30696 91177308-0d34-0410-b5e6-96231b3b80d8
or when splitting loops with a common header into multiple loops. In particular
the old code would always insert the preheader before the old loop header. This
is disasterous in cases where the loop hasn't been rotated. For example, it can
produce code like:
.. outside the loop...
jmp LBB1_2 #bb13.outer
LBB1_1: #bb1
movsd 8(%esp,%esi,8), %xmm1
mulsd (%edi), %xmm1
addsd %xmm0, %xmm1
addl $24, %edi
incl %esi
jmp LBB1_3 #bb13
LBB1_2: #bb13.outer
leal (%edx,%eax,8), %edi
pxor %xmm1, %xmm1
xorl %esi, %esi
LBB1_3: #bb13
movapd %xmm1, %xmm0
cmpl $4, %esi
jl LBB1_1 #bb1
Note that the loop body is actually LBB1_1 + LBB1_3, which means that the
loop now contains an uncond branch WITHIN it to jump around the inserted
loop header (LBB1_2). Doh.
This patch changes the preheader insertion code to insert it in the right
spot, producing this code:
... outside the loop, fall into the header ...
LBB1_1: #bb13.outer
leal (%edx,%eax,8), %esi
pxor %xmm0, %xmm0
xorl %edi, %edi
jmp LBB1_3 #bb13
LBB1_2: #bb1
movsd 8(%esp,%edi,8), %xmm0
mulsd (%esi), %xmm0
addsd %xmm1, %xmm0
addl $24, %esi
incl %edi
LBB1_3: #bb13
movapd %xmm0, %xmm1
cmpl $4, %edi
jl LBB1_2 #bb1
Totally crazy, no branch in the loop! :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@30587 91177308-0d34-0410-b5e6-96231b3b80d8
reachable, making it general purpose enough for use by InsertPreheaderForLoop.
Eliminate custom dominfo updating code in InsertPreheaderForLoop, using
UpdateDomInfoForRevectoredPreds instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@30586 91177308-0d34-0410-b5e6-96231b3b80d8
that we can't modify the CFG any more, at least not until it's possible
to update the dominator tree (PR217).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@30469 91177308-0d34-0410-b5e6-96231b3b80d8
DLL* linkages got full (I hope) codegeneration support in C & both x86
assembler backends.
External weak linkage added for future use, we don't provide any
codegeneration, etc. support for it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@30374 91177308-0d34-0410-b5e6-96231b3b80d8
operations (like findProperties) should be faster, at the expense of
unionSets being slower in cases that are rare in practise.
Don't erase a dead Instruction. This fixes a memory corruption issue.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@30235 91177308-0d34-0410-b5e6-96231b3b80d8
