Fix an off-by-one access introduced in 224502 for push.w and pop.w with single
register operands. Add test cases for both scenarios.
Thanks to Asiri Rathnayake for pointing out the failure!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224521 91177308-0d34-0410-b5e6-96231b3b80d8
Added RegOp2MemOpTable4 to transform 4th operand from register to memory in merge-masked versions of instructions.
Added lowering tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224516 91177308-0d34-0410-b5e6-96231b3b80d8
The ARM Architecture Reference Manual states the following:
LDM{,IA,DB}:
The SP cannot be in the list.
The PC can be in the list.
If the PC is in the list:
• the LR must not be in the list
• the instruction must be either outside any IT block, or the last
instruction in an IT block.
POP:
The PC can be in the list.
If the PC is in the list:
• the LR must not be in the list
• the instruction must be either outside any IT block, or the last
instruction in an IT block.
PUSH:
The SP and PC can be in the list in ARM instructions, but not in Thumb
instructions.
STM:{,IA,DB}:
The SP and PC can be in the list in ARM instructions, but not in Thumb
instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224502 91177308-0d34-0410-b5e6-96231b3b80d8
Near as I can tell prefixes are ignored on these instructions except for a comment in the Intel docs about 0xf3. Binutils disassembler seems to ignore prefixes on these instructions. Our disassembler still doesn't distinguish PS and "no prefix" well enough for this to make a functional change, but it helps with experiments I'm doing on a potential new disassembler table builder.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224496 91177308-0d34-0410-b5e6-96231b3b80d8
of the abi we should be using. For targets that don't use the
option there's no change, otherwise this allows external users
to set the ABI via string and avoid some of the -backend-option
pain in clang.
Use this option to move the ABI for the ARM port from the
Subtarget to the TargetMachine and update the testcases
accordingly since it's no longer valid to set via -mattr.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224492 91177308-0d34-0410-b5e6-96231b3b80d8
same. This will change the "bare metal" ABI from APCS to AAPCS.
The only difference between the front and back end code is that
the code for Triple::GNU was added for environment. That will migrate
to the front end shortly.
Tests updated with the ABI they were originally testing in the case
of bare metal (e.g. -mtriple armv7) or with a -gnu for arm-linux
triples.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224489 91177308-0d34-0410-b5e6-96231b3b80d8
This was missed last time around, for the P8 Instruction Scheduling
changes (223257). This will hook the P8Model entry in so those
changes will actually be used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224452 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
With isSingleValueType starting to treat vector types as single-value types,
code that uses this interface needs to be updated.
Test Plan:
vector-global.ll
nvcl-param-align.ll
Reviewers: jholewinski
Reviewed By: jholewinski
Subscribers: llvm-commits, meheff, eliben, jholewinski
Differential Revision: http://reviews.llvm.org/D6573
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224440 91177308-0d34-0410-b5e6-96231b3b80d8
The assert was off-by-one, resulting in failures for valid input.
Thanks to Asiri Rathnayake for pointing out the failure!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224432 91177308-0d34-0410-b5e6-96231b3b80d8
This handles the case of a BUILD_VECTOR being constructed out of elements extracted from a vector twice the size of the result vector. Previously this was always scalarized. Now, we try to construct a shuffle node that feeds on extract_subvectors.
This fixes PR15872 and provides a partial fix for PR21711.
Differential Revision: http://reviews.llvm.org/D6678
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224429 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
When generating MIPS assembly, LLVM always overrides the default assembler options by emitting the '.set noreorder', '.set nomacro' and '.set noat' directives,
while GCC uses the default options if an assembly-level function contains inline assembly code.
This becomes a problem when the code generated by LLVM is interleaved with inline assembly which assumes GCC-like assembler options (from Linux, for example).
This patch fixes these conflicts by setting the appropriate assembler options at the beginning of an inline asm block and popping them at the end.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6637
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224425 91177308-0d34-0410-b5e6-96231b3b80d8
The type promotion helper does not support vector type, so when make
such it does not kick in in such cases.
Original commit message:
[CodeGenPrepare] Move sign/zero extensions near loads using type promotion.
This patch extends the optimization in CodeGenPrepare that moves a sign/zero
extension near a load when the target can combine them. The optimization may
promote any operations between the extension and the load to make that possible.
Although this optimization may be beneficial for all targets, in particular
AArch64, this is enabled for X86 only as I have not benchmarked it for other
targets yet.
** Context **
Most targets feature extended loads, i.e., loads that perform a zero or sign
extension for free. In that context it is interesting to expose such pattern in
CodeGenPrepare so that the instruction selection pass can form such loads.
Sometimes, this pattern is blocked because of instructions between the load and
the extension. When those instructions are promotable to the extended type, we
can expose this pattern.
** Motivating Example **
Let us consider an example:
define void @foo(i8* %addr1, i32* %addr2, i8 %a, i32 %b) {
%ld = load i8* %addr1
%zextld = zext i8 %ld to i32
%ld2 = load i32* %addr2
%add = add nsw i32 %ld2, %zextld
%sextadd = sext i32 %add to i64
%zexta = zext i8 %a to i32
%addza = add nsw i32 %zexta, %zextld
%sextaddza = sext i32 %addza to i64
%addb = add nsw i32 %b, %zextld
%sextaddb = sext i32 %addb to i64
call void @dummy(i64 %sextadd, i64 %sextaddza, i64 %sextaddb)
ret void
}
As it is, this IR generates the following assembly on x86_64:
[...]
movzbl (%rdi), %eax # zero-extended load
movl (%rsi), %es # plain load
addl %eax, %esi # 32-bit add
movslq %esi, %rdi # sign extend the result of add
movzbl %dl, %edx # zero extend the first argument
addl %eax, %edx # 32-bit add
movslq %edx, %rsi # sign extend the result of add
addl %eax, %ecx # 32-bit add
movslq %ecx, %rdx # sign extend the result of add
[...]
The throughput of this sequence is 7.45 cycles on Ivy Bridge according to IACA.
Now, by promoting the additions to form more extended loads we would generate:
[...]
movzbl (%rdi), %eax # zero-extended load
movslq (%rsi), %rdi # sign-extended load
addq %rax, %rdi # 64-bit add
movzbl %dl, %esi # zero extend the first argument
addq %rax, %rsi # 64-bit add
movslq %ecx, %rdx # sign extend the second argument
addq %rax, %rdx # 64-bit add
[...]
The throughput of this sequence is 6.15 cycles on Ivy Bridge according to IACA.
This kind of sequences happen a lot on code using 32-bit indexes on 64-bit
architectures.
Note: The throughput numbers are similar on Sandy Bridge and Haswell.
** Proposed Solution **
To avoid the penalty of all these sign/zero extensions, we merge them in the
loads at the beginning of the chain of computation by promoting all the chain of
computation on the extended type. The promotion is done if and only if we do not
introduce new extensions, i.e., if we do not degrade the code quality.
To achieve this, we extend the existing “move ext to load” optimization with the
promotion mechanism introduced to match larger patterns for addressing mode
(r200947).
The idea of this extension is to perform the following transformation:
ext(promotableInst1(...(promotableInstN(load))))
=>
promotedInst1(...(promotedInstN(ext(load))))
The promotion mechanism in that optimization is enabled by a new TargetLowering
switch, which is off by default. In other words, by default, the optimization
performs the “move ext to load” optimization as it was before this patch.
** Performance **
Configuration: x86_64: Ivy Bridge fixed at 2900MHz running OS X 10.10.
Tested Optimization Levels: O3/Os
Tests: llvm-testsuite + externals.
Results:
- No regression beside noise.
- Improvements:
CINT2006/473.astar: ~2%
Benchmarks/PAQ8p: ~2%
Misc/perlin: ~3%
The results are consistent for both O3 and Os.
<rdar://problem/18310086>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224402 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: As a side-quest for D6629 jvoung pointed out that I should use -verify-machineinstrs and this found a bug in x86-32's handling of EFLAGS for PUSHF/POPF. This patch fixes the use/def, and adds -verify-machineinstrs to all x86 tests which contain 'EFLAGS'. One exception: this patch leaves inline-asm-fpstack.ll as-is because it fails -verify-machineinstrs in a way unrelated to EFLAGS. This patch also modifies cmpxchg-clobber-flags.ll along the lines of what D6629 already does by also testing i386.
Test Plan: ninja check
Reviewers: t.p.northover, jvoung
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6687
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224359 91177308-0d34-0410-b5e6-96231b3b80d8
This patch extends the optimization in CodeGenPrepare that moves a sign/zero
extension near a load when the target can combine them. The optimization may
promote any operations between the extension and the load to make that possible.
Although this optimization may be beneficial for all targets, in particular
AArch64, this is enabled for X86 only as I have not benchmarked it for other
targets yet.
** Context **
Most targets feature extended loads, i.e., loads that perform a zero or sign
extension for free. In that context it is interesting to expose such pattern in
CodeGenPrepare so that the instruction selection pass can form such loads.
Sometimes, this pattern is blocked because of instructions between the load and
the extension. When those instructions are promotable to the extended type, we
can expose this pattern.
** Motivating Example **
Let us consider an example:
define void @foo(i8* %addr1, i32* %addr2, i8 %a, i32 %b) {
%ld = load i8* %addr1
%zextld = zext i8 %ld to i32
%ld2 = load i32* %addr2
%add = add nsw i32 %ld2, %zextld
%sextadd = sext i32 %add to i64
%zexta = zext i8 %a to i32
%addza = add nsw i32 %zexta, %zextld
%sextaddza = sext i32 %addza to i64
%addb = add nsw i32 %b, %zextld
%sextaddb = sext i32 %addb to i64
call void @dummy(i64 %sextadd, i64 %sextaddza, i64 %sextaddb)
ret void
}
As it is, this IR generates the following assembly on x86_64:
[...]
movzbl (%rdi), %eax # zero-extended load
movl (%rsi), %es # plain load
addl %eax, %esi # 32-bit add
movslq %esi, %rdi # sign extend the result of add
movzbl %dl, %edx # zero extend the first argument
addl %eax, %edx # 32-bit add
movslq %edx, %rsi # sign extend the result of add
addl %eax, %ecx # 32-bit add
movslq %ecx, %rdx # sign extend the result of add
[...]
The throughput of this sequence is 7.45 cycles on Ivy Bridge according to IACA.
Now, by promoting the additions to form more extended loads we would generate:
[...]
movzbl (%rdi), %eax # zero-extended load
movslq (%rsi), %rdi # sign-extended load
addq %rax, %rdi # 64-bit add
movzbl %dl, %esi # zero extend the first argument
addq %rax, %rsi # 64-bit add
movslq %ecx, %rdx # sign extend the second argument
addq %rax, %rdx # 64-bit add
[...]
The throughput of this sequence is 6.15 cycles on Ivy Bridge according to IACA.
This kind of sequences happen a lot on code using 32-bit indexes on 64-bit
architectures.
Note: The throughput numbers are similar on Sandy Bridge and Haswell.
** Proposed Solution **
To avoid the penalty of all these sign/zero extensions, we merge them in the
loads at the beginning of the chain of computation by promoting all the chain of
computation on the extended type. The promotion is done if and only if we do not
introduce new extensions, i.e., if we do not degrade the code quality.
To achieve this, we extend the existing “move ext to load” optimization with the
promotion mechanism introduced to match larger patterns for addressing mode
(r200947).
The idea of this extension is to perform the following transformation:
ext(promotableInst1(...(promotableInstN(load))))
=>
promotedInst1(...(promotedInstN(ext(load))))
The promotion mechanism in that optimization is enabled by a new TargetLowering
switch, which is off by default. In other words, by default, the optimization
performs the “move ext to load” optimization as it was before this patch.
** Performance **
Configuration: x86_64: Ivy Bridge fixed at 2900MHz running OS X 10.10.
Tested Optimization Levels: O3/Os
Tests: llvm-testsuite + externals.
Results:
- No regression beside noise.
- Improvements:
CINT2006/473.astar: ~2%
Benchmarks/PAQ8p: ~2%
Misc/perlin: ~3%
The results are consistent for both O3 and Os.
<rdar://problem/18310086>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224351 91177308-0d34-0410-b5e6-96231b3b80d8
This is a fix for PR21709 ( http://llvm.org/bugs/show_bug.cgi?id=21709 ).
When we have 2 consecutive 16-byte loads that are merged into one 32-byte vector,
we can use a single 32-byte load instead.
But we don't do this for SandyBridge / IvyBridge because they have slower 32-byte memops.
We also don't bother using 32-byte *integer* loads on a machine that only has AVX1 (btver2)
because those operands would have to be split in half anyway since there is no support for
32-byte integer math ops.
Differential Revision: http://reviews.llvm.org/D6492
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224344 91177308-0d34-0410-b5e6-96231b3b80d8
According to AVX specification:
"Most arithmetic and data processing instructions encoded using the VEX prefix and
performing memory accesses have more flexible memory alignment requirements
than instructions that are encoded without the VEX prefix. Specifically,
With the exception of explicitly aligned 16 or 32 byte SIMD load/store instructions,
most VEX-encoded, arithmetic and data processing instructions operate in
a flexible environment regarding memory address alignment, i.e. VEX-encoded
instruction with 32-byte or 16-byte load semantics will support unaligned load
operation by default. Memory arguments for most instructions with VEX prefix
operate normally without causing #GP(0) on any byte-granularity alignment
(unlike Legacy SSE instructions)."
The same for AVX-512.
This change does not affect anything right now, because only the "memop pattern fragment"
depends on FeatureVectorUAMem and it is not used in AVX patterns.
All AVX patterns are based on the "unaligned load" anyway.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224330 91177308-0d34-0410-b5e6-96231b3b80d8
The use of SP and PC in the register list for stores is deprecated on ARM
(ARM ARM A.8.8.199):
ARM deprecates the use of ARM instructions that include the SP or the PC in
the list.
Provide a deprecation warning from the assembler in the case that the syntax is
ever seen.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224319 91177308-0d34-0410-b5e6-96231b3b80d8
The PowerPC backend, somewhat embarrassingly, did not generate an
optimal-length sequence of instructions for a 32-bit bswap. While adding a
pattern for the bswap intrinsic to fix this would not have been terribly
difficult, doing so would not have addressed the real problem: we had been
generating poor code for many bit-permuting operations (by which I mean things
like byte-swap that permute the bits of one or more inputs around in various
ways). Here are some initial steps toward solving this deficiency.
Bit-permuting operations are represented, at the SDAG level, using ISD::ROTL,
SHL, SRL, AND and OR (mostly with constant second operands). Looking back
through these operations, we can build up a description of the bits in the
resulting value in terms of bits of one or more input values (and constant
zeros). For each bit, we compute the rotation amount from the original value,
and then group consecutive (value, rotation factor) bits into groups. Groups
sharing these attributes are then collected and sorted, and we can then
instruction select the entire permutation using a combination of masked
rotations (rlwinm), imm ands (andi/andis), and masked rotation inserts
(rlwimi).
The result is that instead of lowering an i32 bswap as:
rlwinm 5, 3, 24, 16, 23
rlwinm 4, 3, 24, 0, 7
rlwimi 4, 3, 8, 8, 15
rlwimi 5, 3, 8, 24, 31
rlwimi 4, 5, 0, 16, 31
we now produce:
rlwinm 4, 3, 8, 0, 31
rlwimi 4, 3, 24, 16, 23
rlwimi 4, 3, 24, 0, 7
and for the 'test6' example in the PowerPC/README.txt file:
unsigned test6(unsigned x) {
return ((x & 0x00FF0000) >> 16) | ((x & 0x000000FF) << 16);
}
we used to produce:
lis 4, 255
rlwinm 3, 3, 16, 0, 31
ori 4, 4, 255
and 3, 3, 4
and now we produce:
rlwinm 4, 3, 16, 24, 31
rlwimi 4, 3, 16, 8, 15
and, as a nice bonus, this fixes the FIXME in
test/CodeGen/PowerPC/rlwimi-and.ll.
This commit does not include instruction-selection for i64 operations, those
will come later.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224318 91177308-0d34-0410-b5e6-96231b3b80d8
Debug info marks the first instruction without the FrameSetup flag
as being the end of the function prologue. Any CFI instructions in the
middle of the function prologue would cause debug info to end the prologue
too early and worse, attach the line number of the CFI instruction, which
incidentally is often 0.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224294 91177308-0d34-0410-b5e6-96231b3b80d8
