The Thumb2 LDRS?[BH] instructions are not valid when the destination
register is the PC (these encodings are used for preload hints).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220278 91177308-0d34-0410-b5e6-96231b3b80d8
The only difference from r219829 is using
getOrCreateSectionSymbol(*ELFSec)
instead of
GetOrCreateSymbol(ELFSec->getSectionName())
in ELFObjectWriter which causes us to use the correct section symbol even if
we have multiple sections with the same name.
Original messages:
r219829:
Correctly handle references to section symbols.
When processing assembly like
.long .text
we were creating a new undefined symbol .text. GAS on the other hand would
handle that as a reference to the .text section.
This patch implements that by creating the section symbols earlier so that
they are visible during asm parsing.
The patch also updates llvm-readobj to print the symbol number in the relocation
dump so that the test can differentiate between two sections with the same name.
r219835:
Allow forward references to section symbols.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220021 91177308-0d34-0410-b5e6-96231b3b80d8
Revert "Correctly handle references to section symbols."
Revert "Allow forward references to section symbols."
Rui found a regression I am debugging.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220010 91177308-0d34-0410-b5e6-96231b3b80d8
In AVX512f we support 64x2 and 32x8 inserts via matching them to 32x4 and 64x4
respectively. These are matched by "Alt" Pat<>'s (Alt stands for alternative
VTs).
Since DQ has native support for these intructions, I peeled off the non-"Alt"
part of the baseclass into vinsert_for_size_no_alt. The DQ instructions are
derived from this multiclass. The "Alt" Pat<>'s are disabled with DQ.
Fixes <rdar://problem/18426089>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219874 91177308-0d34-0410-b5e6-96231b3b80d8
When processing assembly like
.long .text
we were creating a new undefined symbol .text. GAS on the other hand would
handle that as a reference to the .text section.
This patch implements that by creating the section symbols earlier so that
they are visible during asm parsing.
The patch also updates llvm-readobj to print the symbol number in the relocation
dump so that the test can differentiate between two sections with the same name.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219829 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Currently an error is thrown if bundle alignment mode is set more than once
per module (either via the API or the .bundle_align_mode directive). This
change allows setting it multiple times as long as the alignment doesn't
change.
Also nested bundle_lock groups are currently not allowed. This change allows
them, with the effect that the group stays open until all nests are exited,
and if any of the bundle_lock directives has the align_to_end flag, the
group becomes align_to_end.
These changes make the bundle aligment simpler to use in the compiler, and
also better match the corresponding support in GNU as.
Reviewers: jvoung, eliben
Differential Revision: http://reviews.llvm.org/D5801
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219811 91177308-0d34-0410-b5e6-96231b3b80d8
The VSX instruction definitions for lxsdx, lxvd2x, lxvdsx, and lxvw4x
incorrectly use the XForm_1 instruction format, rather than the
XX1Form instruction format. This is likely a pasto when creating
these instructions, which were based on lvx and so forth. This patch
uses the correct format.
The existing reformatting test (test/MC/PowerPC/vsx.s) missed this
because the two formats differ only in that XX1Form has an extension
to the target register field in bit 31. The tests for these
instructions used a target register of 7, so the default of 0 in bit
31 for XForm_1 didn't expose a problem. For register numbers 32-63
this would be noticeable. I've changed the test to use higher
register numbers to verify my change is effective.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219416 91177308-0d34-0410-b5e6-96231b3b80d8
These derive from the new asm-only masking definitions.
Unfortunately I wasn't able to find a ISel pattern that we could legally
generate for the masking variants. The problem is that since the destination
is v4* we would need VK4 register classes and v4i1 value types to express the
masking. These are however not legal types/classes in AVX512f but only in VL,
so things get complicated pretty quickly. We can revisit this question later
if we have a more pressing need to express something like this.
So the ISel patterns are empty for the masking instructions and the next patch
will add Pat<>s instead to match the intrinsics calls with instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219361 91177308-0d34-0410-b5e6-96231b3b80d8
COFF normally doesn't allow us to describe the alignment of COMMON
symbols.
It turns out that most linkers use the symbol size as a hint as to how
aligned the symbol should be.
However the BFD folks have added a .drectve command, which we
now support as of r219229, that allows us to specify the alignment
precisely. With this in mind, stop rounding sizes up.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219281 91177308-0d34-0410-b5e6-96231b3b80d8
The GNU linker supports an -aligncomm directive that allows for power-of-2
alignment of common data. Add support to emit this directive.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219229 91177308-0d34-0410-b5e6-96231b3b80d8
Unfortunately, this isn't easy to fix since there's no simple way to figure out from the disassembler tables whether the W-bit is being used to select a 64-bit GPR or if its a required part of the opcode. The fix implemented here just looks for "64" in the instruction name and ignores the W-bit in 32-bit mode if its present.
Fixes PR21169.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219194 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r218918, effectively reapplying r218914 after fixing
an Ocaml bindings test and an Asan crash. The root cause of the latter
was a tightened-up check in `DILexicalBlock::Verify()`, so I'll file a
PR to investigate who requires the loose check (and why).
Original commit message follows.
--
This patch addresses the first stage of PR17891 by folding constant
arguments together into a single MDString. Integers are stringified and
a `\0` character is used as a separator.
Part of PR17891.
Note: I've attached my testcases upgrade scripts to the PR. If I've
just broken your out-of-tree testcases, they might help.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219010 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The register names t4-t7 are not available in the N32 and N64 ABIs.
This patch prints a warning, when those names are used in N32/64,
along with a fix-it with the correct register names.
Patch by Vasileios Kalintiris
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5272
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218989 91177308-0d34-0410-b5e6-96231b3b80d8
This patch addresses the first stage of PR17891 by folding constant
arguments together into a single MDString. Integers are stringified and
a `\0` character is used as a separator.
Part of PR17891.
Note: I've attached my testcases upgrade scripts to the PR. If I've
just broken your out-of-tree testcases, they might help.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218914 91177308-0d34-0410-b5e6-96231b3b80d8
The A64 instruction set includes a generic register syntax for accessing
implementation-defined system registers. The syntax for these registers is:
S<op0>_<op1>_<CRn>_<CRm>_<op2>
The encoding space permitted for implementation-defined system registers
is:
op0 op1 CRn CRm op2
11 xxx 1x11 xxxx xxx
The full encoding space can now be accessed:
op0 op1 CRn CRm op2
xx xxx xxxx xxxx xxx
This is useful to anyone needing to write assembly code supporting new
system registers before the assembler has learned the official names for
them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218753 91177308-0d34-0410-b5e6-96231b3b80d8
Users of getSectionContents shouldn't try to pass in BSS or virtual
sections. In all instances, this is a bug in the code calling this
routine.
N.B. Some COFF implementations (like CL) will mark their BSS sections as
taking space on disk. This would confuse COFFObjectFile into thinking
the section is larger than the file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218549 91177308-0d34-0410-b5e6-96231b3b80d8
This patch makes the ARM backend transform 3 operand instructions such as
'adds/subs' to the 2 operand version of the same instruction if the first
two register operands are the same.
Example: 'adds r0, r0, #1' will is transformed to 'adds r0, #1'.
Currently for some instructions such as 'adds' if you try to assemble
'adds r0, r0, #8' for thumb v6m the assembler would throw an error message
because the immediate cannot be encoded using 3 bits.
The backend should be smart enough to transform the instruction to
'adds r0, #8', which allows for larger immediate constants.
Patch by Ranjeet Singh.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218521 91177308-0d34-0410-b5e6-96231b3b80d8
On ARM NEON, VAND with immediate (16/32 bits) is an alias to VBIC ~imm with
the same type size. Adding that logic to the parser, and generating VBIC
instructions from VAND asm files.
This patch also fixes the validation routines for NEON splat immediates which
were wrong.
Fixes PR20702.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218450 91177308-0d34-0410-b5e6-96231b3b80d8
The Thumb2 BXJ instruction (Branch and Exchange Jazelle) is not
defined for v7M or v8A. It is defined for all other Thumb2-supporting
architectures (v6T2, v7A and v7R).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218445 91177308-0d34-0410-b5e6-96231b3b80d8
Nico Rieck added support for this 32-bit COFF relocation some time ago
for Win64 stuff. It appears that as an oversight, the assembly output
used "foo"@IMGREL32 instead of "foo"@IMGREL, which is what we can parse.
Sadly, there were actually tests that took in IMGREL and put out
IMGREL32, and we didn't notice the inconsistency. Oh well. Now LLVM can
assemble it's own output with slightly more fidelity.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218437 91177308-0d34-0410-b5e6-96231b3b80d8
v7M only allows the 16-bit encoding of the 'cps' (Change Processor
State) instruction, and does not have the 32-bit encoding which is
valid from v6T2 onwards.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218382 91177308-0d34-0410-b5e6-96231b3b80d8
e.g., add w1, w2, w3, lsl #(2 - 1)
This sort of thing comes up in pre-processed assembly playing macro games.
Still validate that it's an assembly time constant. The early exit error check
was just a bit overzealous and disallowed a left paren.
rdar://18430542
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218336 91177308-0d34-0410-b5e6-96231b3b80d8
