This is done in a bit of a strange way to use a multiline RE instead of
looping over the lines. Suggestions welcome here for a more pythonic way
of doing this as long as its reasonably fast.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228131 91177308-0d34-0410-b5e6-96231b3b80d8
with 'stress' to indicate that the specific output isn't interesting and
relax them to only check the last instruction (a ret).
I've updated the one test case that really uses this to name the one
'stress_test' which was actually producing output we can directly check.
With this, the script doesn't introduce noise when run over the v16 test
file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228033 91177308-0d34-0410-b5e6-96231b3b80d8
Similar to the C++14 void specializations of these templates, useful as
a stop-gap until LLVM switches to '14.
Example use-cases in tblgen because I saw some functors that looked like
they could be simplified/refactored.
Reviewers: dexonsmith
Differential Revision: http://reviews.llvm.org/D7324
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227828 91177308-0d34-0410-b5e6-96231b3b80d8
The hot path through this region of code does lots of batch inserts into sets. By storing them as sorted arrays, we can defer the sorting to the end of the batch, which is dramatically more efficient. This reduces tblgen runtime by 25% on my worst-case target.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227682 91177308-0d34-0410-b5e6-96231b3b80d8
This is a continuation of my prior work to move some of the inner workings for CodeGenRegister to use bit vectors when computing about register units. This is highly beneficial to TableGen runtime on targets with large, dense register files. This patch represents a ~40% runtime reduction over and above my earlier improvement on a stress test of this case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227678 91177308-0d34-0410-b5e6-96231b3b80d8
For target descriptions with very large and very dense register files, TableGen
can take an extremely long time to run. This change makes a dent in that (~15%
in my measurements) by accelerating the single hottest operation with better data
structures.
I believe there's still a lot of room to make this even faster with more global
changes that require replacing some of the existing datastructures in this area
with bit vectors, but that's a more involved change and I wanted to get this
simpler improvement in first.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227562 91177308-0d34-0410-b5e6-96231b3b80d8
derived classes.
Since global data alignment, layout, and mangling is often based on the
DataLayout, move it to the TargetMachine. This ensures that global
data is going to be layed out and mangled consistently if the subtarget
changes on a per function basis. Prior to this all targets(*) have
had subtarget dependent code moved out and onto the TargetMachine.
*One target hasn't been migrated as part of this change: R600. The
R600 port has, as a subtarget feature, the size of pointers and
this affects global data layout. I've currently hacked in a FIXME
to enable progress, but the port needs to be updated to either pass
the 64-bitness to the TargetMachine, or fix the DataLayout to
avoid subtarget dependent features.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227113 91177308-0d34-0410-b5e6-96231b3b80d8
In llvm-mode, with electric-pair-mode turned on, typing a literal '['
would print out '[[', and '(' would print a '(('. This was a very
annoying bug caused by overzealous syntax-table entries: the parens are
already part of the '(' and ')' class by default. Fix this.
While at it, notice that i32, i64, i1 etc. are not font-locked despite a
clear intent to do so. The issue is that regexp-opt doesn't accept
regular expressions. So, spell out the common literal integers with
different widths.
Differential Revision: http://reviews.llvm.org/D7036
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226931 91177308-0d34-0410-b5e6-96231b3b80d8
Specifically, gc.result benefits from this greatly. Instead of:
gc.result.int.*
gc.result.float.*
gc.result.ptr.*
...
We now have a gc.result.* that can specialize to literally any type.
Differential Revision: http://reviews.llvm.org/D7020
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226857 91177308-0d34-0410-b5e6-96231b3b80d8
This makes the assembler check their size and removes a hack from the disassembler to avoid sign extending the immediate.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226645 91177308-0d34-0410-b5e6-96231b3b80d8
ELF linkers by default allow shared libraries to contain undefined references
and it is up to the dynamic linker to look for them.
On COFF and MachO, that is not the case.
This creates a situation where a .so might build on an ELF system, but the build
of the corresponding .dylib or .dll will fail.
This patch changes the cmake build to use -Wl,-z,defs when linking and updates
the dependencies so that -DBUILD_SHARED_LIBS=ON build still works.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226611 91177308-0d34-0410-b5e6-96231b3b80d8
This patch was generated by a clang tidy checker that is being open sourced.
The documentation of that checker is the following:
/// The emptiness of a container should be checked using the empty method
/// instead of the size method. It is not guaranteed that size is a
/// constant-time function, and it is generally more efficient and also shows
/// clearer intent to use empty. Furthermore some containers may implement the
/// empty method but not implement the size method. Using empty whenever
/// possible makes it easier to switch to another container in the future.
Patch by Gábor Horváth!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226161 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for creating an InstAlias with a negative immediate, i.e.:
def NOT : InstAlias<"not $dst, $src", (XORI GR32:$dst, GR32:$src, -1)>;
by resolving this problem:
RISCVGenAsmMatcher.inc:95:11: error: expected '= constant-expression' or end of enumerator definition
CVT_imm_-1,
^^^^^^^^^^
Patch by Jordy Potman, thanks!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226073 91177308-0d34-0410-b5e6-96231b3b80d8
This adds assembly and bitcode support for `MDLocation`. The assembly
side is rather big, since this is the first `MDNode` subclass (that
isn't `MDTuple`). Part of PR21433.
(If you're wondering where the mountains of testcase updates are, we
don't need them until I update `DILocation` and `DebugLoc` to actually
use this class.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225830 91177308-0d34-0410-b5e6-96231b3b80d8
These intrinsics allow multiple functions to share a single stack
allocation from one function's call frame. The function with the
allocation may only perform one allocation, and it must be in the entry
block.
Functions accessing the allocation call llvm.recoverframeallocation with
the function whose frame they are accessing and a frame pointer from an
active call frame of that function.
These intrinsics are very difficult to inline correctly, so the
intention is that they be introduced rarely, or at least very late
during EH preparation.
Reviewers: echristo, andrew.w.kaylor
Differential Revision: http://reviews.llvm.org/D6493
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225746 91177308-0d34-0410-b5e6-96231b3b80d8
Instead, just present the command for committing it. This way,
the user can test the merge locally, resolve conflicts, etc.
before committing, which seems much safer to me.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225737 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: I think this is probably a bug, but I'm putting this up for review just to be sure. I think that `lit.util.capture` should decode the resulting string in the same way `lit.util.executeCommand` does.
Reviewers: ddunbar, EricWF
Reviewed By: EricWF
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6769
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225681 91177308-0d34-0410-b5e6-96231b3b80d8
This adds two new fields to the RegisterOperand TableGen class:
string OperandNamespace = "MCOI";
string OperandType = "OPERAND_REGISTER";
These fields can be used to specify a target specific operand type,
which will be stored in the OperandType member of the MCOperandInfo
object.
This can be useful for targets that need to store some extra information
about operands that cannot be expressed using the target independent
types. For example, in the R600 backend, there are operands which
can take either registers or immediates and it is convenient to be able
to specify this in the TableGen definitions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225661 91177308-0d34-0410-b5e6-96231b3b80d8
This script is currently specific to x86 and limited to use with very
small regression or feature tests using 'llc' and 'FileCheck' in
a reasonably canonical way. It is in no way general purpose or robust at
this point. However, it works quite well for simple examples. Here is
the intended workflow:
- Make a change that requires updating N test files and M functions'
assertions within those files.
- Stash the change.
- Update those N test files' RUN-lines to look "canonical"[1].
- Refresh the FileCheck lines for either the entire file or select
functions by running this script.
- The script will parse the RUN lines and run the 'llc' binary you
give it according to each line, collecting the asm.
- It will then annotate each function with the appropriate FileCheck
comments to check every instruction from the start of the first
basic block to the last return.
- There will be numerous cases where the script either fails to remove
the old lines, or inserts checks which need to be manually editted,
but the manual edits tend to be deletions or replacements of
registers with FileCheck variables which are fast manual edits.
- A common pattern is to have the script insert complete checking of
every instruction, and then edit it down to only check the relevant
ones.
- Be careful to do all of these cleanups though! The script is
designed to make transferring and formatting the asm output of llc
into a test case fast, it is *not* designed to be authoratitive
about what constitutes a good test!
- Commit the nice fresh baseline of checks.
- Unstash your change and rebuild llc.
- Re-run script to regenerate the FileCheck annotations
- Remember to re-cleanup these annotations!!!
- Check the diff to make sure this is sane, checking the things you
expected it to, and check that the newly updated tests actually pass.
- Profit!
Also, I'm *terrible* at writing Python, and frankly I didn't spend a lot
of time making this script beautiful or well engineered. But it's useful
to me and may be useful to others so I thought I'd send it out.
http://reviews.llvm.org/D5546
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225618 91177308-0d34-0410-b5e6-96231b3b80d8
Propagate whether `MDNode`s are 'distinct' through the other types of IR
(assembly and bitcode). This adds the `distinct` keyword to assembly.
Currently, no one actually calls `MDNode::getDistinct()`, so these nodes
only get created for:
- self-references, which are never uniqued, and
- nodes whose operands are replaced that hit a uniquing collision.
The concept of distinct nodes is still not quite first-class, since
distinct-ness doesn't yet survive across `MapMetadata()`.
Part of PR22111.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225474 91177308-0d34-0410-b5e6-96231b3b80d8
* Both files have valid package headers and footers (you can verify
with M-x checkdoc).
* Fixed style warnings generated by checkdoc.
* Fixed a byte-compiler warning in llvm-mode.el.
* Ensure that the modes are autoloaded, so users do not need to
(require 'llvm-mode) to use them.
Patch by Wilfred Hughes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225356 91177308-0d34-0410-b5e6-96231b3b80d8
Requires new AsmParserOperand types that detect 16-bit and 32/64-bit mode so that we choose the right instruction based on default sizing without predicates. This is necessary since predicates mess up the disassembler table building.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225256 91177308-0d34-0410-b5e6-96231b3b80d8
This is necessary to allow the disassembler to be able to handle AdSize32 instructions in 64-bit mode when address size prefix is used.
Eventually we should probably also support 'addr32' and 'addr16' in the assembler to override the address size on some of these instructions. But for now we'll just use special operand types that will lookup the current mode size to select the right instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225075 91177308-0d34-0410-b5e6-96231b3b80d8
This removes a hardcoded list of instructions in the CodeEmitter. Eventually I intend to remove the predicates on the affected instructions since in any given mode two of them are valid if we supported addr32/addr16 prefixes in the assembler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224809 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The following types can be encoded and decoded by the json library:
`dict`, `list`, `tuple`, `str`, `unicode`, `int`, `long`, `float`, `bool`, `NoneType`.
`JSONMetricValue` can be constructed with any of these types, and used as part of Test.Result.
This patch also adds a toMetricValue function that converts a value into a MetricValue.
Reviewers: ddunbar, EricWF
Reviewed By: EricWF
Subscribers: cfe-commits, llvm-commits
Differential Revision: http://reviews.llvm.org/D6576
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224628 91177308-0d34-0410-b5e6-96231b3b80d8
An instruction alias defined with InstAlias and an optional operand in the
middle of the AsmString field, "..${a} <operands>", would get the final
"}" printed in the instruction disassembly. This wouldn't happen if the optional
operand appeared as the last item in the AsmString which is how the current
backends avoided the problem.
There don't appear to be any tests for this part of Tablegen but it passes the
pre-commit tests. Manually tested the change by enabling the generic alias
printer in the ARM backend and checking the output.
Differential Revision: http://reviews.llvm.org/D6529
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224348 91177308-0d34-0410-b5e6-96231b3b80d8
On X86, the Intel asm parser tries to match all memory operand sizes when
none is explicitly specified. For LEA, which doesn't really have a memory
operand (just a pointer one), this results in multiple successful matches,
one for each memory size. There's no error because it's same opcode, so
really, it's just one match. However, the tablegen'd matcher function
adds opcode/operands to the passed MCInst, and this results in multiple
duplicated operands.
This commit clears the MCInst in the tablegen'd matcher function.
We sometimes clear it when the match failed, so there's no expectation of
keeping the previous content anyway.
Differential Revision: http://reviews.llvm.org/D6670
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224347 91177308-0d34-0410-b5e6-96231b3b80d8
Clang's static analyzer found several potential cases of undefined
behavior, use of un-initialized values, and potentially null pointer
dereferences in tablegen, Support, MC, and ADT. This cleans them up
with specific assertions on the assumptions of the code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224154 91177308-0d34-0410-b5e6-96231b3b80d8
We were already requiring 2.5, which meant that people on old linux distros
had to upgrade anyway.
Requiring python 2.6 will make supporting 3.X easier as we can use the 3.X
exception syntax.
According to the discussion on llvmdev, there is not much value is requiring
just 2.6, we may as well just require 2.7.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224129 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch gives me just enough to leverage the existing functionality in `TestRunner` for use in `libc++` and `libc++abi` .
It does the following:
* Adds the `UNSUPPORTED` tag to `TestRunner.parseIntegratedTestScript`.
* Allows `parseIntegratedTestScript` to return an empty script if a script is not required by the caller.
Reviewers: ddunbar, EricWF
Reviewed By: EricWF
Subscribers: cfe-commits, llvm-commits
Differential Revision: http://reviews.llvm.org/D6589
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223915 91177308-0d34-0410-b5e6-96231b3b80d8
This works like the composeSubRegisterIndices() function but transforms
a subregister lane mask instead of a subregister index.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223874 91177308-0d34-0410-b5e6-96231b3b80d8
Let tablegen compute the combination of subregister lanemasks for all
subregisters in a register/register class. This is preparation for further
work subregister allocation
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223873 91177308-0d34-0410-b5e6-96231b3b80d8
Remove setting of default style, this way is not recommended and
means that all the settings have to be duplicated to demonstrate the
c-add-style method which is a much better way of doing it.
Remove the modified date as it is better stored in SVN.
Tweak a few style parameters to make them conform to the actual LLVM
style.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223765 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
I currently have to specify --build=mips-linux-gnu or --build=mipsel-linux-gnu
to configure in order to successfully recurse a 32-bit build of the compiler on
my mips64-linux-gnu and mips64el-linux-gnu targets. This is a bug and will be
fixed but in the meantime it will be useful to have a way to work around this.
Reviewers: tstellarAMD
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6522
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223369 91177308-0d34-0410-b5e6-96231b3b80d8
--disable-timestamps was added to the configure command way back in r142647 but
the command that echos this command to the log was not updated at the time.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223351 91177308-0d34-0410-b5e6-96231b3b80d8
I'm recommiting the codegen part of the patch.
The vectorizer part will be send to review again.
Masked Vector Load and Store Intrinsics.
Introduced new target-independent intrinsics in order to support masked vector loads and stores. The loop vectorizer optimizes loops containing conditional memory accesses by generating these intrinsics for existing targets AVX2 and AVX-512. The vectorizer asks the target about availability of masked vector loads and stores.
Added SDNodes for masked operations and lowering patterns for X86 code generator.
Examples:
<16 x i32> @llvm.masked.load.v16i32(i8* %addr, <16 x i32> %passthru, i32 4 /* align */, <16 x i1> %mask)
declare void @llvm.masked.store.v8f64(i8* %addr, <8 x double> %value, i32 4, <8 x i1> %mask)
Scalarizer for other targets (not AVX2/AVX-512) will be done in a separate patch.
http://reviews.llvm.org/D6191
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223348 91177308-0d34-0410-b5e6-96231b3b80d8
This complicates a few algorithms due to not having random access, but
not by a huge degree I don't think (open to debate/design
discussion/etc).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223261 91177308-0d34-0410-b5e6-96231b3b80d8
--xunit-xml-output saves test results to disk in JUnit's xml format. This will allow Jenkins to report the details of a lit run.
Based on a patch by David Chisnall.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223163 91177308-0d34-0410-b5e6-96231b3b80d8
This is the second patch in a small series. This patch contains the MachineInstruction and x86-64 backend pieces required to lower Statepoints. It does not include the code to actually generate the STATEPOINT machine instruction and as a result, the entire patch is currently dead code. I will be submitting the SelectionDAG parts within the next 24-48 hours. Since those pieces are by far the most complicated, I wanted to minimize the size of that patch. That patch will include the tests which exercise the functionality in this patch. The entire series can be seen as one combined whole in http://reviews.llvm.org/D5683.
The STATEPOINT psuedo node is generated after all gc values are explicitly spilled to stack slots. The purpose of this node is to wrap an actual call instruction while recording the spill locations of the meta arguments used for garbage collection and other purposes. The STATEPOINT is modeled as modifing all of those locations to prevent backend optimizations from forwarding the value from before the STATEPOINT to after the STATEPOINT. (Doing so would break relocation semantics for collectors which wish to relocate roots.)
The implementation of STATEPOINT is closely modeled on PATCHPOINT. Eventually, much of the code in this patch will be removed. The long term plan is to merge the functionality provided by statepoints and patchpoints. Merging their implementations in the backend is likely to be a good starting point.
Reviewed by: atrick, ributzka
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223085 91177308-0d34-0410-b5e6-96231b3b80d8
Order matters for this container, it seems (using a forward_list and
replacing the original push_backs with emplace_fronts caused test
failures). I didn't look too deeply into why.
(& in retrospect, I might go back & change some of the forward_lists I
introduced to deques anyway - since most don't require removal, deque is
a more memory-friendly data structure (moderate locality while not
invalidating pointers))
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222950 91177308-0d34-0410-b5e6-96231b3b80d8
Just avoid using std::map::emplace since it's not implemented in
libstdc++ 4.7.
Reapplies r222937, reverted in r222939.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222940 91177308-0d34-0410-b5e6-96231b3b80d8
Seems libstdc++ on some buildbots is lacking std::map::emplace, which is
weird... reverting while I look into it.
This reverts commit r222937.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222939 91177308-0d34-0410-b5e6-96231b3b80d8
Pointers and references to map elements are never invalidated (except on
removal, which isn't used here) so there's no need for the indirection
unless there's polymorphism at work.
A little const correctness had to be fixed, since the indirection
allowed some benign const violations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222937 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r222632 (and follow-up r222636), which caused a host
of LNT failures on an internal bot. I'll respond to the commit on the
list with a reproduction of one of the failures.
Conflicts:
lib/Target/X86/X86TargetTransformInfo.cpp
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222936 91177308-0d34-0410-b5e6-96231b3b80d8
Since the elements were not polymorphic, the unique_ptr was only used to
avoid pointer invalidation on container resizes - might as well skip the
indirection and use a container with suitable invalidation semantics.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222931 91177308-0d34-0410-b5e6-96231b3b80d8
