------------------------------------------------------------------------
r213915 | wschmidt | 2014-07-24 18:55:55 -0700 (Thu, 24 Jul 2014) | 21 lines
[PATCH][PPC64LE] Correct little-endian usage of vmrgh* and vmrgl*.
Because the PowerPC vmrgh* and vmrgl* instructions have a built-in
big-endian bias, it is necessary to swap their inputs in little-endian
mode when using them to implement a vector shuffle. This was
previously missed in the vector LE implementation.
There was already logic to distinguish between unary and "normal"
vmrg* vector shuffles, so this patch extends that logic to use a third
option: "swapped" vmrg* vector shuffles that are used for little
endian in place of the "normal" ones.
I've updated the vec-shuffle-le.ll test to check for the expected
register ordering on the generated instructions.
This bug was discovered when testing the LE and ELFv2 patches for
safety if they were backported to 3.4. A different vectorization
decision was made in 3.4 than on mainline trunk, and that exposed the
problem. I've verified this fix takes care of that issue.
------------------------------------------------------------------------
git-svn-id: https://llvm.org/svn/llvm-project/llvm/branches/release_35@213961 91177308-0d34-0410-b5e6-96231b3b80d8
------------------------------------------------------------------------
r213826 | filcab | 2014-07-23 18:28:21 -0700 (Wed, 23 Jul 2014) | 7 lines
Fixed PR20411 - bug in getINSERTPS()
When we had a vector_shuffle where we had an input from each vector, we
could miscompile it because we were assuming the input from V2 wouldn't
be moved from where it was on the vector.
Added a test case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/branches/release_35@213911 91177308-0d34-0410-b5e6-96231b3b80d8
------------------------------------------------------------------------
r213674 | delcypher | 2014-07-22 18:48:51 +0100 (Tue, 22 Jul 2014) | 5 lines
Add LLVM_TOOLS_BINARY_DIR variable to LLVMConfig.cmake so clients
of LLVM using CMake can easily find the tools directory.
LLVM_BUILD_TOOLS_BINARY_DIR was removed because it is now
superfluous.
------------------------------------------------------------------------
git-svn-id: https://llvm.org/svn/llvm-project/llvm/branches/release_35@213766 91177308-0d34-0410-b5e6-96231b3b80d8
------------------------------------------------------------------------
r213664 | delcypher | 2014-07-22 16:41:33 +0100 (Tue, 22 Jul 2014) | 3 lines
Export LLVM_ENABLE_RTTI and LLVM_ENABLE_EH in LLVMConfig.cmake so
clients of LLVM know if RTTI and/or EH were enabled in the build of
LLVM they are trying to link against.
------------------------------------------------------------------------
git-svn-id: https://llvm.org/svn/llvm-project/llvm/branches/release_35@213765 91177308-0d34-0410-b5e6-96231b3b80d8
------------------------------------------------------------------------
r213663 | delcypher | 2014-07-22 16:41:18 +0100 (Tue, 22 Jul 2014) | 4 lines
Added LLVM_ENABLE_RTTI and LLVM_ENABLE_EH options that allow RTTI and EH
to globally be controlled. Individual targets (e.g. ExceptionDemo) can
still override this by using LLVM_REQUIRE_RTTI and LLVM_REQUIRE_EH if
they need to be compiled with RTTI or exception handling respectively.
------------------------------------------------------------------------
git-svn-id: https://llvm.org/svn/llvm-project/llvm/branches/release_35@213764 91177308-0d34-0410-b5e6-96231b3b80d8
file not in the test/ area). Backing out now so that this test isn't part of
the 3.5 branch.
Original commit message: "TableGen: Allow AddedComplexity values to be negative
[...]"
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213596 91177308-0d34-0410-b5e6-96231b3b80d8
As it turns out, the capture tracker named CaptureBefore used by AA, and now
available via the PointerMayBeCapturedBefore function, would have been
more-aptly named CapturedBeforeOrAt, because it considers captures at the
instruction provided. This is not always what one wants, and it is difficult to
get the strictly-before behavior given only the current interface. This adds an
additional parameter which controls whether or not you want to include
captures at the provided instruction. The default is not to include the
instruction provided, so that 'Before' matches its name.
No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213582 91177308-0d34-0410-b5e6-96231b3b80d8
GCC believes it may be possible to not return a value from the switch:
lib/Target/R600/SIRegisterInfo.cpp:187:1: warning: control reaches end of non-void function [-Wreturn-type]
Add an unreachable label to indicate that this is not possible and still permit
switch coverage checking.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213572 91177308-0d34-0410-b5e6-96231b3b80d8
We should update the usages to all of the results;
otherwise, we might get assertion failure or SEGV during
the type legalization of ATOMIC_CMP_SWAP_WITH_SUCCESS
with two or more illegal types.
For example, in the following sequence, both i8 and i1
might be illegal in some target, e.g. armv5, mipsel, mips64el,
%0 = cmpxchg i8* %ptr, i8 %desire, i8 %new monotonic monotonic
%1 = extractvalue { i8, i1 } %0, 1
Since both i8 and i1 should be legalized, the corresponding
ATOMIC_CMP_SWAP_WITH_SUCCESS dag will be checked/replaced/updated
twice.
If we don't update the usage to *ALL* of the results in the
first round, the DAG for extractvalue might be processed earlier.
The GetPromotedInteger() will result in assertion failure,
because its operand (i.e. the success bit of cmpxchg) is not
promoted beforehand.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213569 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r213474 (and r213475), which causes a miscompile on
a stage2 LTO build. I'll reply on the list in a moment.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213562 91177308-0d34-0410-b5e6-96231b3b80d8
createBinary documented that it destroyed the parameter in error cases,
though by observation it does not. By passing the unique_ptr by value
rather than lvalue reference, callers are now explicit about passing
ownership and the function implements the documented contract. Remove
the explicit documentation, since now the behavior cannot be anything
other than what was documented, so it's redundant.
Also drops a unique_ptr::release in llvm-nm that was always run on a
null unique_ptr anyway.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213557 91177308-0d34-0410-b5e6-96231b3b80d8
There are a few more cleanups to do, but I ran into some problems
with ext loads and trunc stores, when I tried to change some of the
vector loads and stores from custom to legal, so I wasn't able to
get rid of everything.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213552 91177308-0d34-0410-b5e6-96231b3b80d8
We now emit this value when we need to contradict the default value. This
restores support for binutils 2.24.
When a suitable binutils has been released we can resume unconditionally
emitting .module directives. This is preferable to omitting the .module
directives since the .module directives protect against, for example,
accidentally assembling FP32 code with -mfp64 and producing an unusuable object.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213548 91177308-0d34-0410-b5e6-96231b3b80d8
This implements a solution for constant initializers suggested
by Vadim Girlin, where we store the data after the shader code
and then use the S_GETPC instruction to compute its address.
This saves use the trouble of creating a new buffer for constant data
and then having to pass the pointer to the kernel via user SGPRs or the
input buffer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213530 91177308-0d34-0410-b5e6-96231b3b80d8
This allows us to explicitly define the type of fixup that is needed,
so we can distinguish this from future fixup types.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213527 91177308-0d34-0410-b5e6-96231b3b80d8
This abstraction allows us to support the various records that can be placed in
the .MIPS.options section in the future. We currently use it to record register
usage information (the ODK_REGINFO record in our ELF64 spec).
Each .MIPS.options record should subclass MipsOptionRecord and provide an
implementation of EmitMipsOptionRecord.
Patch by Matheus Almeida and Toma Tabacu
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213522 91177308-0d34-0410-b5e6-96231b3b80d8
This is useful for cases when stand-alone patterns are preferred to the
patterns included in the instruction definitions. Instead of requiring
that stand-alone patterns set a larger AddedComplexity value, which
can be confusing to new developers, the allows us to reduce the
complexity of the included patterns to achieve the same result.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213521 91177308-0d34-0410-b5e6-96231b3b80d8
There were two generally-useful CaptureTracker classes defined in LLVM: the
simple tracker defined in CaptureTracking (and made available via the
PointerMayBeCaptured utility function), and the CapturesBefore tracker
available only inside of AA. This change moves the CapturesBefore tracker into
CaptureTracking, generalizes it slightly (by adding a ReturnCaptures
parameter), and makes it generally available via a PointerMayBeCapturedBefore
utility function.
This logic will be needed, for example, to perform noalias function parameter
attribute inference.
No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213519 91177308-0d34-0410-b5e6-96231b3b80d8
The ability to identify function locals will exist outside of BasicAA (for
example, logic for inferring noalias function arguments will need this), so
make this concept generally accessible without code duplication.
No functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213514 91177308-0d34-0410-b5e6-96231b3b80d8
