Original message:
The attached is the fix to radar://11663049. The optimization can be outlined by following rules:
(select (x != c), e, c) -> select (x != c), e, x),
(select (x == c), c, e) -> select (x == c), x, e)
where the <c> is an integer constant.
The reason for this change is that : on x86, conditional-move-from-constant needs two instructions;
however, conditional-move-from-register need only one instruction.
While the LowerSELECT() sounds to be the most convenient place for this optimization, it turns out to be a bad place. The reason is that by replacing the constant <c> with a symbolic value, it obscure some instruction-combining opportunities which would otherwise be very easy to spot. For that reason, I have to postpone the change to last instruction-combining phase.
The change passes the test of "make check-all -C <build-root/test" and "make -C project/test-suite/SingleSource".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165661 91177308-0d34-0410-b5e6-96231b3b80d8
the compiler makes use of GPR0. However, there are two flavors of
GPR0 defined by the target: the 32-bit GPR0 (R0) and the 64-bit GPR0
(X0). The spill/reload code makes use of R0 regardless of whether we
are generating 32- or 64-bit code.
This patch corrects the problem in the obvious manner, using X0 and
ADDI8 for 64-bit and R0 and ADDI for 32-bit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165658 91177308-0d34-0410-b5e6-96231b3b80d8
the Altivec extensions were introduced. Its use is optional, and
allows the compiler to communicate to the operating system which
vector registers should be saved and restored during a context switch.
In practice, this information is ignored by the various operating
systems using the SVR4 ABI; the kernel saves and restores the entire
register state. Setting the VRSAVE register is no longer performed by
the AIX XL compilers, the IBM i compilers, or by GCC on Power Linux
systems. It seems best to avoid this logic within LLVM as well.
This patch avoids generating code to update and restore VRSAVE for the
PowerPC SVR4 ABIs (32- and 64-bit). The code remains in place for the
Darwin ABI.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165656 91177308-0d34-0410-b5e6-96231b3b80d8
The minimum set of required instructions is ISD::AND, ISD::OR, ISD::SETO(or ISD::SETOEQ) and ISD::SETUO(or ISD::SETUNE). Everything is expanded into one of two patterns:
Pattern 1: (LHS CC1 RHS) Opc (LHS CC2 RHS)
Pattern 2: (LHS CC1 LHS) Opc (RHS CC2 RHS)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165655 91177308-0d34-0410-b5e6-96231b3b80d8
Some of these dyn_cast<>'s would be better phrased as isa<> or cast<>.
That will happen in a future patch.
There are also two dyn_cast_or_null<>'s slipped in instead of
dyn_cast<>'s, since they were causing crashes with just dyn_cast<>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165646 91177308-0d34-0410-b5e6-96231b3b80d8
Hypothesis 1: use of `.. code::` directive instead of `.. code-block::`
is causing Sphinx to discard the block. On my machine, `.. code::`
renders fine. However, I don't think that `.. code::` is actually a
legit Sphinx directive. I believe that on my machine Sphinx is falling
back to just displaying it monospace with no syntax, whereas llvm.org's
Sphinx is just discarding it.
This is truly "remote debugging" since I can't reproduce this on my
machine. It would be helpful to be able to see the llvm.org Sphinx
build logs; if that's possible please let me know.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165632 91177308-0d34-0410-b5e6-96231b3b80d8
- Due to the current matching vector elements constraints in
ISD::FP_ROUND, rounding from v2f64 to v4f32 (after legalization from
v2f32) is scalarized. Add a customized v2f32 widening to convert it
into a target-specific X86ISD::VFPROUND to work around this
constraints.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165631 91177308-0d34-0410-b5e6-96231b3b80d8
- Due to the current matching vector elements constraints in ISD::FP_EXTEND,
rounding from v2f32 to v2f64 is scalarized. Add a customized v2f32 widening
to convert it into a target-specific X86ISD::VFPEXT to work around this
constraints. This patch also reverts a previous attempt to fix this issue by
recovering the scalarized ISD::FP_EXTEND pattern and thus significantly
reduces the overhead of supporting non-power-2 vector FP extend.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165625 91177308-0d34-0410-b5e6-96231b3b80d8
SDNode for LDRB_POST_IMM is invalid: number of registers added to SDNode fewer
that described in .td.
7 ops is needed, but SDNode with only 6 is created.
In more details:
In ARMInstrInfo.td, in multiclass AI2_ldridx, in definition _POST_IMM, offset
operand is defined as am2offset_imm. am2offset_imm is complex parameter type,
and actually it consists from dummy register and imm itself. As I understood
trick with dummy reg was made for AsmParser. In ARMISelLowering.cpp, this dummy
register was not added to SDNode, and it cause crash in Peephole Optimizer pass.
The problem fixed by setting up additional dummy reg when emitting
LDRB_POST_IMM instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165617 91177308-0d34-0410-b5e6-96231b3b80d8
SchedulerDAGInstrs::buildSchedGraph ignores dependencies between FixedStack
objects and byval parameters. So loading byval parameters from stack may be
inserted *before* it will be stored, since these operations are treated as
independent.
Fix:
Currently ARMTargetLowering::LowerFormalArguments saves byval registers with
FixedStack MachinePointerInfo. To fix the problem we need to store byval
registers with MachinePointerInfo referenced to first the "byval" parameter.
Also commit adds two new fields to the InputArg structure: Function's argument
index and InputArg's part offset in bytes relative to the start position of
Function's argument. E.g.: If function's argument is 128 bit width and it was
splitted onto 32 bit regs, then we got 4 InputArg structs with same arg index,
but different offset values.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165616 91177308-0d34-0410-b5e6-96231b3b80d8
checkRegMaskInterference only initializes the bitmask on the first interference.
This fixes PR14027 and (re)fixes PR13945.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165608 91177308-0d34-0410-b5e6-96231b3b80d8
Allows the new machine model to be used for NumMicroOps and OutputLatency.
Allows the HazardRecognizer to be disabled along with itineraries.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165603 91177308-0d34-0410-b5e6-96231b3b80d8
This wasn't contributing anything significant to postRA heuristics except compile time (by my measurements) and will be replaced by a more general heuristic for cross-region dependencies within the scheduler itself.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165563 91177308-0d34-0410-b5e6-96231b3b80d8
This patch provides initial implementation of load address
macro instruction for Mips. We have implemented two kinds
of expansions with their variations depending on the size
of immediate operand:
1) load address with immediate value directly:
* la d,j => addiu d,$zero,j (for -32768 <= j <= 65535)
* la d,j => lui d,hi16(j)
ori d,d,lo16(j) (for any other 32 bit value of j)
2) load load address with register offset value
* la d,j(s) => addiu d,s,j (for -32768 <= j <= 65535)
* la d,j(s) => lui d,hi16(j) (for any other 32 bit value of j)
ori d,d,lo16(j)
addu d,d,s
This patch does not cover the case when the address is loaded
from the value of the label or function.
Contributer: Vladimir Medic
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165561 91177308-0d34-0410-b5e6-96231b3b80d8
