Aliases inherit their comdat from their aliasee, they don't have an
explicit comdat.
This fixes PR20279.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212732 91177308-0d34-0410-b5e6-96231b3b80d8
This is the one remaining place I see where passing
isSafeToSpeculativelyExecute a DataLayout pointer might matter (at least for
loads) -- I think I got the others in r212720. Most of the other remaining
callers of isSafeToSpeculativelyExecute only use it for call sites (or
otherwise exclude loads).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212730 91177308-0d34-0410-b5e6-96231b3b80d8
Remove a default label which covered no enumerators, replace it with a
llvm_unreachable.
No functionality changed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212729 91177308-0d34-0410-b5e6-96231b3b80d8
This patch teaches the AsmParser to accept some logical+immediate
instructions and convert them as shown:
bic Rd, Rn, #imm -> and Rd, Rn, #~imm
bics Rd, Rn, #imm -> ands Rd, Rn, #~imm
orn Rd, Rn, #imm -> orr Rd, Rn, #~imm
eon Rd, Rn, #imm -> eor Rd, Rn, #~imm
Those instructions are an alternate syntax available to assembly coders,
and are needed in order to support code already compiling with some other
assemblers. For example, the bic construct is used by the linux kernel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212722 91177308-0d34-0410-b5e6-96231b3b80d8
isSafeToSpeculativelyExecute can optionally take a DataLayout pointer. In the
past, this was mainly used to make better decisions regarding divisions known
not to trap, and so was not all that important for users concerned with "cheap"
instructions. However, now it also helps look through bitcasts for
dereferencable loads, and will also be important if/when we add a
dereferencable pointer attribute.
This is some initial work to feed a DataLayout pointer through to callers of
isSafeToSpeculativelyExecute, generally where one was already available.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212720 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
When -mno-odd-spreg is in effect, 32-bit floating point values are not
permitted in odd FPU registers. The option also prohibits 32-bit and 64-bit
floating point comparison results from being written to odd registers.
This option has three purposes:
* It allows support for certain MIPS implementations such as loongson-3a that
do not allow the use of odd registers for single precision arithmetic.
* When using -mfpxx, -mno-odd-spreg is the default and this allows us to
statically check that code is compliant with the O32 FPXX ABI since mtc1/mfc1
instructions to/from odd registers are guaranteed not to appear for any
reason. Once this has been established, the user can then re-enable
-modd-spreg to regain the use of all 32 single-precision registers.
* When using -mfp64 and -mno-odd-spreg together, an O32 extension named
O32 FP64A is used as the ABI. This is intended to provide almost all
functionality of an FR=1 processor but can also be executed on a FR=0 core
with the assistance of a hardware compatibility mode which emulates FR=0
behaviour on an FR=1 processor.
* Added '.module oddspreg' and '.module nooddspreg' each of which update
the .MIPS.abiflags section appropriately
* Moved setFpABI() call inside emitDirectiveModuleFP() so that the caller
doesn't have to remember to do it.
* MipsABIFlags now calculates the flags1 and flags2 member on demand rather
than trying to maintain them in the same format they will be emitted in.
There is one portion of the -mfp64 and -mno-odd-spreg combination that is not
implemented yet. Moves to/from odd-numbered double-precision registers must not
use mtc1. I will fix this in a follow-up.
Differential Revision: http://reviews.llvm.org/D4383
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212717 91177308-0d34-0410-b5e6-96231b3b80d8
to the zero-extend-vector-inreg node introduced previously for the same
purpose: manage the type legalization of widened extend operations,
especially to support the experimental widening mode for x86.
I'm adding both because sign-extend is expanded in terms of any-extend
with shifts to propagate the sign bit. This removes the last
fundamental scalarization from vec_cast2.ll (a test case that hit many
really bad edge cases for widening legalization), although the trunc
tests in that file still appear scalarized because the the shuffle
legalization is scalarizing. Funny thing, I've been working on that.
Some initial experiments with this and SSE2 scenarios is showing
moderately good behavior already for sign extension. Still some work to
do on the shuffle combining on X86 before we're generating optimal
sequences, but avoiding scalarization is a huge step forward.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212714 91177308-0d34-0410-b5e6-96231b3b80d8
There's no real need to have Shift as a separate format type from Binary.
The comments for other format types were too specific and in some cases
no longer accurate.
Just a clean-up, no behavioral change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212707 91177308-0d34-0410-b5e6-96231b3b80d8
shuffle lowering: match shuffle patterns equivalent to an unpcklwd or
unpckhwd instruction.
This allows us to use generic lowering code for v8i16 shuffles and match
the unpack pattern late.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212705 91177308-0d34-0410-b5e6-96231b3b80d8
These instructions aren't used for codegen since the original L*DB instructions
are suitable for fround.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212703 91177308-0d34-0410-b5e6-96231b3b80d8
Immediate fields that have no natural MVT type tended to use i8 if the
field was small enough. This was a bit confusing since i8 isn't a legal
type for the target. Fields for short immediates in a 32-bit or 64-bit
operation use i32 or i64 instead, so it would be better to do the same
for all fields.
No behavioral change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212702 91177308-0d34-0410-b5e6-96231b3b80d8
The dwarf FPR numbers are supposed to have the order F0, F2, F4, F6,
F1, F3, F5, F7, F8, etc., which matches the pairing of registers for
long doubles. E.g. a long double stored in F0 is paired with F2.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212701 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
On MIPS32r6/MIPS64r6, floating point comparisons return 0 or -1 but integer
comparisons return 0 or 1.
Updated the various uses of getBooleanContents. Two simplifications had to be
disabled when float and int boolean contents differ:
- ScalarizeVecRes_VSELECT except when the kind of boolean contents is trivially
discoverable (i.e. when the condition of the VSELECT is a SETCC node).
- visitVSELECT (select C, 0, 1) -> (xor C, 1).
Come to think of it, this one could test for the common case of 'C'
being a SETCC too.
Preserved existing behaviour for all other targets and updated the affected
MIPS32r6/MIPS64r6 tests. This also fixes the pi benchmark where the 'low'
variable was counting in the wrong direction because it thought it could simply
add the result of the comparison.
Reviewers: hfinkel
Reviewed By: hfinkel
Subscribers: hfinkel, jholewinski, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D4389
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212697 91177308-0d34-0410-b5e6-96231b3b80d8
combine into half-shuffles through unpack instructions that expand the
half to a whole vector without messing with the dword lanes.
This fixes some redundant instructions in splat-like lowerings for
v16i8, which are now getting to be *really* nice.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212695 91177308-0d34-0410-b5e6-96231b3b80d8
that splat i8s into i16s.
Previously, we would try much too hard to arrange a sequence of i8s in
one half of the input such that we could unpack them into i16s and
shuffle those into place. This isn't always going to be a cheaper i8
shuffle than our other strategies. The case where it is always going to
be cheaper is when we can arrange all the necessary inputs into one half
using just i16 shuffles. It happens that viewing the problem this way
also makes it much easier to produce an efficient set of shuffles to
move the inputs into one half and then unpack them.
With this, our splat code gets one step closer to being not terrible
with the new experimental lowering strategy. It also exposes two
combines missing which I will add next.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212692 91177308-0d34-0410-b5e6-96231b3b80d8
isDereferenceablePointer should not give up upon encountering any bitcast. If
we're casting from a pointer to a larger type to a pointer to a small type, we
can continue by examining the bitcast's operand. This missing capability
was noted in a comment in the function.
In order for this to work, isDereferenceablePointer now takes an optional
DataLayout pointer (essentially all callers already had such a pointer
available). Most code uses isDereferenceablePointer though
isSafeToSpeculativelyExecute (which already took an optional DataLayout
pointer), and to enable the LICM test case, LICM needs to actually provide its DL
pointer to isSafeToSpeculativelyExecute (which it was not doing previously).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212686 91177308-0d34-0410-b5e6-96231b3b80d8
This adds a utility method to access the WinCFI information in bulk and uses
that to iterate rather than requesting the count and individually iterating
them. This is in preparation for restructuring WinCFI handling to enable more
clear sharing across architectures to enable unwind information emission for
Windows on ARM.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212683 91177308-0d34-0410-b5e6-96231b3b80d8
shuffles specifically for cases where a small subset of the elements in
the input vector are actually used.
This is specifically targetted at improving the shuffles generated for
trunc operations, but also helps out splat-like operations.
There is still some really low-hanging fruit here that I want to address
but this is a huge step in the right direction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212680 91177308-0d34-0410-b5e6-96231b3b80d8
don't need to set it manually.
This is based on feedback from Tom who pointed out that if every target
needs to handle this we need to reach out to those maintainers. In fact,
it doesn't make sense to duplicate everything when anything other than
expand seems unlikely at this stage.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212661 91177308-0d34-0410-b5e6-96231b3b80d8
Reverted by Eric Christopher (Thanks!) in r212203 after Bob Wilson
reported LTO issues. Duncan Exon Smith and Aditya Nandakumar helped
provide a reduced reproduction, though the failure wasn't too hard to
guess, and even easier with the example to confirm.
The assertion that the subprogram metadata associated with an
llvm::Function matches the scope data referenced by the DbgLocs on the
instructions in that function is not valid under LTO. In LTO, a C++
inline function might exist in multiple CUs and the subprogram metadata
nodes will refer to the same llvm::Function. In this case, depending on
the order of the CUs, the first intance of the subprogram metadata may
not be the one referenced by the instructions in that function and the
assertion will fail.
A test case (test/DebugInfo/cross-cu-linkonce-distinct.ll) is added, the
assertion removed and a comment added to explain this situation.
Original commit message:
If a function isn't actually in a CU's subprogram list in the debug info
metadata, ignore all the DebugLocs and don't try to build scopes, track
variables, etc.
While this is possibly a minor optimization, it's also a correctness fix
for an incoming patch that will add assertions to LexicalScopes and the
debug info verifier to ensure that all scope chains lead to debug info
for the current function.
Fix up a few test cases that had broken/incomplete debug info that could
violate this constraint.
Add a test case where this occurs by design (inlining a
debug-info-having function in an attribute nodebug function - we want
this to work because /if/ the nodebug function is then inlined into a
debug-info-having function, it should be fine (and will work fine - we
just stitch the scopes up as usual), but should the inlining not happen
we need to not assert fail either).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212649 91177308-0d34-0410-b5e6-96231b3b80d8
Turn llvm::SpecialCaseList into a simple class that parses text files in
a specified format and knows nothing about LLVM IR. Move this class into
LLVMSupport library. Implement two users of this class:
* DFSanABIList in DFSan instrumentation pass.
* SanitizerBlacklist in Clang CodeGen library.
The latter will be modified to use actual source-level information from frontend
(source file names) instead of unstable LLVM IR things (LLVM Module identifier).
Remove dependency edge from ClangCodeGen/ClangDriver to LLVMTransformUtils.
No functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212643 91177308-0d34-0410-b5e6-96231b3b80d8
It is a good idea, it's slightly clearer and simpler. Unfortunately
the headline news is: we save one line!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212641 91177308-0d34-0410-b5e6-96231b3b80d8
Storing will generally be immediately preceded by rounding from an f32
or f64, so make sure to match those patterns directly to convert into the
FPR16 register class directly rather than going through the integer GPRs.
This also eliminates an extra step in the convert-from-f64 path
which was first converting to f32 and then to f16 from there.
rdar://17594379
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212638 91177308-0d34-0410-b5e6-96231b3b80d8
This lets us experiment with 512-bit vectorization without passing
force-vector-width manually.
The code generated for a simple integer memset loop is properly vectorized.
Disassembly is still broken for it though :(.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212634 91177308-0d34-0410-b5e6-96231b3b80d8
This is a follow up to r212492. There should be no functional difference, but
this patch makes it clear that SrcVT must be an i1/i8/16/i32 and DestVT must be
an i8/i16/i32/i64.
rdar://17516686
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212633 91177308-0d34-0410-b5e6-96231b3b80d8
In PR20059 ( http://llvm.org/pr20059 ), instcombine eliminates shuffles that are necessary before performing an operation that can trap (srem).
This patch calls isSafeToSpeculativelyExecute() and bails out of the optimization in SimplifyVectorOp() if needed.
Differential Revision: http://reviews.llvm.org/D4424
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212629 91177308-0d34-0410-b5e6-96231b3b80d8
