This fixes PR16418, which reports that a function calling
__builtin_unwind_init() asserts. The cause is that this generates a
spill/restore for VRSAVE, and we support that only on Darwin (because VRSAVE is
only really used on Darwin).
The test case checks only that we don't crash. We can add correctness checks
once someone verifies what behavior the function is supposed to have.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185235 91177308-0d34-0410-b5e6-96231b3b80d8
To support this we have to insert 'extractelement' instructions to pick the right lane.
We had this functionality before but I removed it when we moved to the multi-block design because it was too complicated.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185230 91177308-0d34-0410-b5e6-96231b3b80d8
Change assert("text") to assert(0 && "text"). The first case is a const char *
to bool conversion, which always evaluates to true, never triggering the
assert. The second case will always trigger the assert.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185227 91177308-0d34-0410-b5e6-96231b3b80d8
- mistakenly used get_current_dir() linux function
- replaced with getcwd/_getcwd as appropriate for current platform
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185225 91177308-0d34-0410-b5e6-96231b3b80d8
In this code we keep track of pointers that we are allowed to read from, if they are accessed by non-predicated blocks.
We use this list to allow vectorization of conditional loads in predicated blocks because we know that these addresses don't segfault.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185214 91177308-0d34-0410-b5e6-96231b3b80d8
- lit tests verify that each line of input LLVM IR gets a !dbg node and a
corresponding entry of metadata that contains the line number
- unit tests verify that DebugIR works as advertised in the interface
- refactored some useful IR generation functionality from the MCJIT unit tests
so it can be reused
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185212 91177308-0d34-0410-b5e6-96231b3b80d8
Patch By: Alex Deucher
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185209 91177308-0d34-0410-b5e6-96231b3b80d8
On OpenBSD, the stack-smash protection transform uses "__guard_local"
and "__stack_smash_handler" instead of "__stack_chk_guard" and
"__stack_chk_fail". However, CodeGen/PowerPC/stack-protector.ll
doesn't specify a target OS, so on OpenBSD it fails.
Add -mtriple=ppc32-unknown-linux to make the test host-OS agnostic. While
there, convert to FileCheck.
Patch by Matthew Dempsky.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185206 91177308-0d34-0410-b5e6-96231b3b80d8
Based on GCC's output for TLS variables (OP_constNu, x@dtpoff,
OP_lo_user), this implements debug info support for TLS in ELF. Verified
that this output is correct/sufficient on Linux (using gold - if you're
using binutils-ld, you'll need something with the fix for
http://sourceware.org/bugzilla/show_bug.cgi?id=15685 in it).
Support on non-ELF is sort of "arbitrary" at the moment - if Apple folks
want to discuss (or just go ahead & implement) how this should work in
MachO, etc, I'm open.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185203 91177308-0d34-0410-b5e6-96231b3b80d8
This is a precursor to adding debug info support for TLS which requires
non-default relocations applied to TLS symbols.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185202 91177308-0d34-0410-b5e6-96231b3b80d8
Under certain (evidently rare) circumstances, this code used to convert OR(a,
AND(x, y)) into OR(a, x). This was incorrect.
While there, I've added a comment to the code immediately above.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185201 91177308-0d34-0410-b5e6-96231b3b80d8
- warn users when -debug-ir is used with old JIT engine (only partial debug
info is available)
For example, to debug an IR file with GDB (that supports JIT registration), do:
$ gdb --args lli -use-mcjit -debug-ir testcase.ll
(gdb) break main
(gdb) run
<Process continues to lli main>
(gdb) continue
<Process continues to testcase.ll main()
(gdb) step
<Now stepping through the LLVM IR in testcase.ll>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185197 91177308-0d34-0410-b5e6-96231b3b80d8
- Build debug metadata for 'bare' Modules using DIBuilder
- DebugIR can be constructed to generate an IR file (to be seen by a debugger)
or not in cases where the user already has an IR file on disk.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185193 91177308-0d34-0410-b5e6-96231b3b80d8
should expand ATOMIC_CMP_SWAP nodes the same way that it does for ATOMIC_SWAP.
Since ATOMIC_LOADs on some targets (e.g. older ARM variants) get legalized to
ATOMIC_CMP_SWAPs, the missing case had been causing i64 atomic loads to crash
during isel.
<rdar://problem/14074644>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185186 91177308-0d34-0410-b5e6-96231b3b80d8
Allow a BlockFrequency to be divided by a non-zero BranchProbability
with saturating arithmetic. This will be used to compute the frequency
of a loop header given the probability of leaving the loop.
Our long division algorithm already saturates on overflow, so that was a
freebie.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185184 91177308-0d34-0410-b5e6-96231b3b80d8
Fix ABI handling for function
returning bool -- use st.param.b32 to return the value
and use ld.param.b32 in caller to load the return value.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185177 91177308-0d34-0410-b5e6-96231b3b80d8
This patch assigns paired GPRs for inline asm with
64-bit data on ARM. It's enabled for both ARM and Thumb to support modifiers
like %H, %Q, %R.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185169 91177308-0d34-0410-b5e6-96231b3b80d8
sys::fs::unique_file will now loop infinitely if provided with a file name
without '%' characters and the input file already exists. As a result, bugpoint
cannot use a fixed file name for the execution output (including the reference
output).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185166 91177308-0d34-0410-b5e6-96231b3b80d8
I used the class to safely reset the state of the builder's debug location. I
think I have caught all places where we need to set the debug location to a new
one. Therefore, we can replace the class by a function that just sets the debug
location.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185165 91177308-0d34-0410-b5e6-96231b3b80d8
We were generating intrinsics for NEON fixed-point conversions that didn't
exist (e.g. float -> i16). There are two cases to consider:
+ iN is smaller than float. In this case we can do the conversion but need an
extend or truncate as well.
+ iN is larger than float. In this case using the NEON conversion would be
incorrect so we don't perform any combining.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185158 91177308-0d34-0410-b5e6-96231b3b80d8
The mapping between SRS pseudo-instructions and SRS native instructions was incorrect, the correct mapping is:
srsfa -> srsib
srsea -> srsia
srsfd -> srsdb
srsed -> srsda
This fixes <rdar://problem/14214734>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185155 91177308-0d34-0410-b5e6-96231b3b80d8
