The MachineVerifier used to check that there was always exactly one
unconditional branch to a non-landingpad (normal) successor.
If that normal successor to an invoke BB is unreachable, it seems
reasonable to only have one successor, the landing pad.
On targets other than AArch64 (and on AArch64 with a different testcase),
the branch folder turns the branch to the landing pad into a fallthrough.
The MachineVerifier, which relies on AnalyzeBranch, is unable to check
the condition, and doesn't complain. However, it does in this specific
testcase, where the branch to the landing pad remained.
Make the MachineVerifier accept it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223059 91177308-0d34-0410-b5e6-96231b3b80d8
An unreachable default destination can be exploited by other optimizations, and
SDag lowering is now prepared to handle them efficiently.
For example, branches to the unreachable destination will be optimized away,
such as in the case of range checks for switch lookup tables.
On 64-bit Linux, this reduces the size of a clang bootstrap by 80 kB (and
Chromium by 30 kB).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223050 91177308-0d34-0410-b5e6-96231b3b80d8
This can significantly reduce the size of the switch, allowing for more
efficient lowering.
I also worked with the idea of exploiting unreachable defaults by
omitting the range check for jump tables, but always ended up with a
non-neglible binary size increase. It might be worth looking into some more.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223049 91177308-0d34-0410-b5e6-96231b3b80d8
The explicit set of destination types is not fully redundant when lazy loading
since the TypeFinder will not find types used only in function bodies.
This keeps the logic to drop the name of mapped types since it still helps
with avoiding further renaming.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223043 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
PowerPC DWARF unwind info defined CFA as SP + offset even in a function
where the stack had been dynamically realigned. This clearly doesn't
work because the offset from SP to CFA is not a constant. Fix it by
defining CFA as BP instead.
This was causing the AddressSanitizer null_deref test to fail 50% of
the time, depending on whether SP happened to be 32-byte aligned on
entry to a particular function or not.
Reviewers: willschm, uweigand, hfinkel
Reviewed By: hfinkel
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6410
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222996 91177308-0d34-0410-b5e6-96231b3b80d8
Add checkDecodedInstruction for post-decode checking of instructions, to catch
the corner cases like HVC that don't fit into the general pattern. Needed to
check for an invalid condition field in instruction encoding despite HVC not
taking a predicate.
Patch by Matthew Wahab.
Change-Id: I48e28de981d7a9e43569594da3c45fb478b4f795
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222992 91177308-0d34-0410-b5e6-96231b3b80d8
Instead of keeping an explicit set, just drop the names of types we choose
to map to some other type.
This has the advantage that the name of the unused will not cause the context
to rename types on module read.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222986 91177308-0d34-0410-b5e6-96231b3b80d8
Add assembler support for the fixed-point cache-inhibited load/store
instructions. These are hypervisor-level only, so don't get too excited ;)
Fixes PR21650.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222976 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r222632 (and follow-up r222636), which caused a host
of LNT failures on an internal bot. I'll respond to the commit on the
list with a reproduction of one of the failures.
Conflicts:
lib/Target/X86/X86TargetTransformInfo.cpp
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222936 91177308-0d34-0410-b5e6-96231b3b80d8
We may be in a situation where the icmps might not be near each other in
a tree of or instructions. Try to dig out related compare instructions
and see if they combine.
N.B. This won't fire on deep trees of compares because rewritting the
tree might end up creating a net increase of IR. We may have to resort
to something more sophisticated if this is a real problem.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222928 91177308-0d34-0410-b5e6-96231b3b80d8
Loop simplify skips exit-block insertion when exits contain indirectbr
instructions. This leads to an assertion in LICM when trying to sink
stores out of non-dedicated loop exits containing indirectbr
instructions. This patch fix this issue by re-checking for dedicated
exits in LICM prior to store sink attempts.
Differential Revision: http://reviews.llvm.org/D6414
rdar://problem/18943047
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222927 91177308-0d34-0410-b5e6-96231b3b80d8
Switch cases statements with sequential values that branch to the same
destination BB may often be handled together in a single new source BB.
In this scenario we need to remove remaining incoming values from PHI
instructions in the destination BB, as to match the number of source
branches.
Differential Revision: http://reviews.llvm.org/D6415
rdar://problem/19040894
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222926 91177308-0d34-0410-b5e6-96231b3b80d8
The original patch would fail when:
* A dst opaque type (%A) is matched with a src type (%A).
* A src opaque (%E) type is then speculatively matched with %A and the
speculation fails afterward.
* When rolling back the speculation we would cancel the source %A to dest
%A mapping.
The fix is to keep an explicit list of which resolutions are speculative.
Original message:
Fix overly aggressive type merging.
If we find out that two types are *not* isomorphic, we learn nothing about
opaque sub types in both the source and destination.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222923 91177308-0d34-0410-b5e6-96231b3b80d8
Add more tests to make sure the encoding/decoding of build attributes works
correctly for all permissible values of build attributes. For cases where there
are an infinite number of such values, a representative subset has been settled
for.
Change-Id: I2643c9624c211b2d56405306e16eec2d487bc5d6
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222917 91177308-0d34-0410-b5e6-96231b3b80d8
The AAPCS treats small structs and homogeneous floating (or vector) aggregates
specially, and guarantees they either get passed as a contiguous block of
registers, or prevent any future use of those registers and get passed on the
stack.
This concept can fit quite neatly into LLVM's own type system, mapping an HFA
to [N x float] and so on, and small structs to [N x i64]. Doing so allows
front-ends to emit AAPCS compliant code without having to duplicate the
register counting logic.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222903 91177308-0d34-0410-b5e6-96231b3b80d8
The current 8 bits is sufficient for ELF32 targets but ELF64 requires
32 bits. Add a test for AArch64 that exposes the issue.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222898 91177308-0d34-0410-b5e6-96231b3b80d8
I also added a test.
Original message:
Allow FDE references outside the +/-2GB range supported by PC relative
offsets for code models other than small/medium. For JIT application,
memory layout is less controlled and can result in truncations
otherwise.
Patch from Akos Kiss.
Differential Revision: http://reviews.llvm.org/D6079
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222897 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r222760.
It changed our behaviour on PIC so we don't match gas anymore. It also
included lots of unnecessary changes to tests.
If those changes are desirable, there should be an independent discussion
as they are out of scope for that patch.
I will recommit the other bits.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222896 91177308-0d34-0410-b5e6-96231b3b80d8
Fixed missing dominance check.
Original commit message:
This optimization tries to reuse the generated compare instruction, if there is a comparison against the default value after the switch.
Example:
if (idx < tablesize)
r = table[idx]; // table does not contain default_value
else
r = default_value;
if (r != default_value)
...
Is optimized to:
cond = idx < tablesize;
if (cond)
r = table[idx];
else
r = default_value;
if (cond)
...
Jump threading will then eliminate the second if(cond).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222891 91177308-0d34-0410-b5e6-96231b3b80d8
The string data for string-valued build attributes were being unconditionally
uppercased. There is no mention in the ARM ABI addenda about case conventions,
so it's technically implementation defined as to whether the data are
capitialised in some way or not. However, there are good reasons not to
captialise the data.
* It's less work.
* Some vendors may legitimately have case-sensitive checks for these
attributes which would fail on LLVM generated object files.
* There could be locale issues with uppercasing.
The original reasons for uppercasing appear to have stemmed from an
old codesourcery toolchain behaviour, see
http://comments.gmane.org/gmane.comp.compilers.llvm.cvs/87133
This patch makes the object file emitted no longer captialise string
data, it encodes as seen in the assembly source.
Change-Id: Ibe20dd6e60d2773d57ff72a78470839033aa5538
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222882 91177308-0d34-0410-b5e6-96231b3b80d8
This optimization tries to reuse the generated compare instruction, if there is a comparison against the default value after the switch.
Example:
if (idx < tablesize)
r = table[idx]; // table does not contain default_value
else
r = default_value;
if (r != default_value)
...
Is optimized to:
cond = idx < tablesize;
if (cond)
r = table[idx];
else
r = default_value;
if (cond)
...
\endcode
Jump threading will then eliminate the second if(cond).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222872 91177308-0d34-0410-b5e6-96231b3b80d8
